- 20 Oct, 2021 7 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "Two important filesystem fixes, marked for stable. The blocklisted superblocks issue was particularly annoying because for unexperienced users it essentially exacted a reboot to establish a new functional mount in that scenario" * tag 'ceph-for-5.15-rc7' of git://github.com/ceph/ceph-client: ceph: fix handling of "meta" errors ceph: skip existing superblocks that are blocklisted or shut down when mounting
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: - fix more dma-debug fallout (Gerald Schaefer, Hamza Mahfooz) - fix a kerneldoc warning (Logan Gunthorpe) * tag 'dma-mapping-5.15-2' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: teach add_dma_entry() about DMA_ATTR_SKIP_CPU_SYNC dma-debug: fix sg checks in debug_dma_map_sg() dma-mapping: fix the kerneldoc for dma_map_sgtable()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Again it became bigger than wished, unfortunately, as this contains quite a few ASoC fixes that came up a bit late. It also includes yet more HD- and USB-audio quirks: I decided to merge them now, as those are for stable, and we'll need them sooner or later. Although the volumes are a bit high, all changes are device-specific (and reasonably small) fixes, so it should be safe for the late rc" * tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Fix microphone sound on Jieli webcam. ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset ALSA: hda/realtek: Add quirk for Clevo PC50HS ALSA: usb-audio: add Schiit Hel device to quirk table ASoC: wm8960: Fix clock configuration on slave mode ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked() ASoC: codec: wcd938x: Add irq config support ASoC: DAPM: Fix missing kctl change notifications ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() ASoC: Intel: bytcht_es8316: Use temporary variable for struct device ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() ASoC: wcd938x: Fix jack detection issue ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working ASoC: cs4341: Add SPI device ID table ASoC: pcm179x: Add missing entries SPI to device ID table ASoC: fsl_xcvr: Fix channel swap issue with ARC ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/auditLinus Torvalds authored
Pull audit fix from Paul Moore: "One small audit patch to add a pointer NULL check" * tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix possible null-pointer dereference in audit_filter_rules
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "Recursion fix for tracing. While cleaning up some of the tracing recursion protection logic, I discovered a scenario that the current design would miss, and would allow an infinite recursion. Removing an optimization trick that opened the hole fixes the issue and cleans up the code as well" * tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have all levels of checks prevent recursion
-
Linus Torvalds authored
Merge tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux Pull nios2 fix from Dinh Nguyen: - Renamed CTL_STATUS to CTL_FSTATUS to fix a redefined warning * tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: NIOS2: irqflags: rename a redefined register name
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Tools: - kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic x86: - clean ups and fixes for bus lock vmexit and lazy allocation of rmaps - two fixes for SEV-ES (one more coming as soon as I get reviews) - fix for static_key underflow ARM: - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SEV-ES: reduce ghcb_sa_len to 32 bits KVM: VMX: Remove redundant handling of bus lock vmexit KVM: kvm_stat: do not show halt_wait_ns KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET" KVM: SEV-ES: Set guest_state_protected after VMSA update KVM: X86: fix lazy allocation of rmaps KVM: SEV-ES: fix length of string I/O KVM: arm64: Release mmap_lock when using VM_SHARED with MTE KVM: arm64: Report corrupted refcount at EL2 KVM: arm64: Fix host stage-2 PGD refcount KVM: s390: Function documentation fixes
-
- 19 Oct, 2021 23 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "19 patches. Subsystems affected by this patch series: mm (userfaultfd, migration, memblock, mempolicy, slub, secretmem, and thp), ocfs2, binfmt, vfs, and misc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: add Andrej Shadura mm/thp: decrease nr_thps in file's mapping on THP split mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem() vfs: check fd has read access in kernel_read_file_from_fd() elfcore: correct reference to CONFIG_UML mm, slub: fix incorrect memcg slab count for bulk free mm, slub: fix potential use-after-free in slab_debugfs_fops mm, slub: fix potential memoryleak in kmem_cache_open() mm, slub: fix mismatch between reconstructed freelist depth and cnt mm, slub: fix two bugs in slab_debug_trace_open() mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() memblock: check memory total_size ocfs2: mount fails with buffer overflow in strlen ocfs2: fix data corruption after conversion from inline format mm/migrate: fix CPUHP state to update node demotion order mm/migrate: add CPU hotplug to demotion #ifdef mm/migrate: optimize hotplug-time demotion order updates userfaultfd: fix a race between writeprotect and exit_mmap() mm/userfaultfd: selftests: fix memory corruption with thp enabled
-
Jeff Layton authored
Currently, we check the wb_err too early for directories, before all of the unsafe child requests have been waited on. In order to fix that we need to check the mapping->wb_err later nearer to the end of ceph_fsync. We also have an overly-complex method for tracking errors after blocklisting. The errors recorded in cleanup_session_requests go to a completely separate field in the inode, but we end up reporting them the same way we would for any other error (in fsync). There's no real benefit to tracking these errors in two different places, since the only reporting mechanism for them is in fsync, and we'd need to advance them both every time. Given that, we can just remove i_meta_err, and convert the places that used it to instead just use mapping->wb_err instead. That also fixes the original problem by ensuring that we do a check_and_advance of the wb_err at the end of the fsync op. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/52864Reported-by: Patrick Donnelly <pdonnell@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-
Jeff Layton authored
Currently when mounting, we may end up finding an existing superblock that corresponds to a blocklisted MDS client. This means that the new mount ends up being unusable. If we've found an existing superblock with a client that is already blocklisted, and the client is not configured to recover on its own, fail the match. Ditto if the superblock has been forcibly unmounted. While we're in here, also rename "other" to the more conventional "fsc". Cc: stable@vger.kernel.org URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-
Andrej Shadura authored
Add a mapping for my old work email for BelDisplayTech to the personal email, and make sure the Collabora email has the correct spelling of the first name. Link: https://lkml.kernel.org/r/20210917091016.30232-1-andrew.shadura@collabora.co.ukSigned-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Marek Szyprowski authored
Decrease nr_thps counter in file's mapping to ensure that the page cache won't be dropped excessively on file write access if page has been already split. I've tried a test scenario running a big binary, kernel remaps it with THPs, then force a THP split with /sys/kernel/debug/split_huge_pages. During any further open of that binary with O_RDWR or O_WRITEONLY kernel drops page cache for it, because of non-zero thps counter. Link: https://lkml.kernel.org/r/20211012120237.2600-1-m.szyprowski@samsung.comSigned-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 09d91cda ("mm,thp: avoid writes to file with THP in pagecache") Fixes: 06d3eff6 ("mm/thp: fix node page state in split_huge_page_to_list()") Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: <sfoon.kim@samsung.com> Cc: Song Liu <songliubraving@fb.com> Cc: Rik van Riel <riel@surriel.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sean Christopherson authored
Check for a NULL page->mapping before dereferencing the mapping in page_is_secretmem(), as the page's mapping can be nullified while gup() is running, e.g. by reclaim or truncation. BUG: kernel NULL pointer dereference, address: 0000000000000068 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G W RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0 Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046 RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900 ... CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0 Call Trace: get_user_pages_fast_only+0x13/0x20 hva_to_pfn+0xa9/0x3e0 try_async_pf+0xa1/0x270 direct_page_fault+0x113/0xad0 kvm_mmu_page_fault+0x69/0x680 vmx_handle_exit+0xe1/0x5d0 kvm_arch_vcpu_ioctl_run+0xd81/0x1c70 kvm_vcpu_ioctl+0x267/0x670 __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20211007231502.3552715-1-seanjc@google.com Fixes: 1507f512 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: Sean Christopherson <seanjc@google.com> Reported-by: Darrick J. Wong <djwong@kernel.org> Reported-by: Stephen <stephenackerman16@gmail.com> Tested-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Matthew Wilcox (Oracle) authored
If we open a file without read access and then pass the fd to a syscall whose implementation calls kernel_read_file_from_fd(), we get a warning from __kernel_read(): if (WARN_ON_ONCE(!(file->f_mode & FMODE_READ))) This currently affects both finit_module() and kexec_file_load(), but it could affect other syscalls in the future. Link: https://lkml.kernel.org/r/20211007220110.600005-1-willy@infradead.org Fixes: b844f0ec ("vfs: define kernel_copy_file_from_fd()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: Hao Sun <sunhao.th@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Lukas Bulwahn authored
Commit 6e7b64b9 ("elfcore: fix building with clang") introduces special handling for two architectures, ia64 and User Mode Linux. However, the wrong name, i.e., CONFIG_UM, for the intended Kconfig symbol for User-Mode Linux was used. Although the directory for User Mode Linux is ./arch/um; the Kconfig symbol for this architecture is called CONFIG_UML. Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs: UM Referencing files: include/linux/elfcore.h Similar symbols: UML, NUMA Correct the name of the config to the intended one. [akpm@linux-foundation.org: fix um/x86_64, per Catalin] Link: https://lkml.kernel.org/r/20211006181119.2851441-1-catalin.marinas@arm.com Link: https://lkml.kernel.org/r/YV6pejGzLy5ppEpt@arm.com Link: https://lkml.kernel.org/r/20211006082209.417-1-lukas.bulwahn@gmail.com Fixes: 6e7b64b9 ("elfcore: fix building with clang") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Barret Rhoden <brho@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Miaohe Lin authored
kmem_cache_free_bulk() will call memcg_slab_free_hook() for all objects when doing bulk free. So we shouldn't call memcg_slab_free_hook() again for bulk free to avoid incorrect memcg slab count. Link: https://lkml.kernel.org/r/20210916123920.48704-6-linmiaohe@huawei.com Fixes: d1b2cf6c ("mm: memcg/slab: uncharge during kmem_cache_free_bulk()") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Miaohe Lin authored
When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s because s will be freed soon. And slab_debugfs_fops will use s later leading to a use-after-free. Link: https://lkml.kernel.org/r/20210916123920.48704-5-linmiaohe@huawei.com Fixes: 64dd6849 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Miaohe Lin authored
In error path, the random_seq of slub cache might be leaked. Fix this by using __kmem_cache_release() to release all the relevant resources. Link: https://lkml.kernel.org/r/20210916123920.48704-4-linmiaohe@huawei.com Fixes: 210e7a43 ("mm: SLUB freelist randomization") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Miaohe Lin authored
If object's reuse is delayed, it will be excluded from the reconstructed freelist. But we forgot to adjust the cnt accordingly. So there will be a mismatch between reconstructed freelist depth and cnt. This will lead to free_debug_processing() complaining about freelist count or a incorrect slub inuse count. Link: https://lkml.kernel.org/r/20210916123920.48704-3-linmiaohe@huawei.com Fixes: c3895391 ("kasan, slub: fix handling of kasan_slab_free hook") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Miaohe Lin authored
Patch series "Fixups for slub". This series contains various bug fixes for slub. We fix memoryleak, use-afer-free, NULL pointer dereferencing and so on in slub. More details can be found in the respective changelogs. This patch (of 5): It's possible that __seq_open_private() will return NULL. So we should check it before using lest dereferencing NULL pointer. And in error paths, we forgot to release private buffer via seq_release_private(). Memory will leak in these paths. Link: https://lkml.kernel.org/r/20210916123920.48704-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210916123920.48704-2-linmiaohe@huawei.com Fixes: 64dd6849 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Dumazet authored
syzbot reported access to unitialized memory in mbind() [1] Issue came with commit bda420b9 ("numa balancing: migrate on fault among multiple bound nodes") This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in do_set_mempolicy() This patch moves the check in sanitize_mpol_flags() so that it is also used by mbind() [1] BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_alloc_node mm/slub.c:3221 [inline] slab_alloc mm/slub.c:3230 [inline] kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235 mpol_new mm/mempolicy.c:293 [inline] do_mbind+0x912/0x15f0 mm/mempolicy.c:1289 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae ===================================================== Kernel panic - not syncing: panic_on_kmsan set ... CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106 dump_stack+0x25/0x28 lib/dump_stack.c:113 panic+0x44f/0xdeb kernel/panic.c:232 kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186 __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20211001215630.810592-1-eric.dumazet@gmail.com Fixes: bda420b9 ("numa balancing: migrate on fault among multiple bound nodes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Peng Fan authored
mem=[X][G|M] is broken on ARM64 platform, there are cases that even type.cnt is 1, but total_size is not 0 because regions are merged into 1. So only check 'cnt' is not enough, total_size should be used, othersize bootargs 'mem=[X][G|B]' not work anymore. Link: https://lkml.kernel.org/r/20210930024437.32598-1-peng.fan@oss.nxp.com Fixes: e888fa7b ("memblock: Check memory add/cap ordering") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Valentin Vidic authored
Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hrSigned-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
Commit 6dbf7bb5 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb5, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph] Link: https://lkml.kernel.org/r/20210930095405.21433-1-jack@suse.cz Fixes: 6dbf7bb5 ("fs: Don't invalidate page buffers in block_write_full_page()") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: "Markov, Andrey" <Markov.Andrey@Dell.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Huang Ying authored
The node demotion order needs to be updated during CPU hotplug. Because whether a NUMA node has CPU may influence the demotion order. The update function should be called during CPU online/offline after the node_states[N_CPU] has been updated. That is done in CPUHP_AP_ONLINE_DYN during CPU online and in CPUHP_MM_VMSTAT_DEAD during CPU offline. But in commit 884a6e5d ("mm/migrate: update node demotion order on hotplug events"), the function to update node demotion order is called in CPUHP_AP_ONLINE_DYN during CPU online/offline. This doesn't satisfy the order requirement. For example, there are 4 CPUs (P0, P1, P2, P3) in 2 sockets (P0, P1 in S0 and P2, P3 in S1), the demotion order is - S0 -> NUMA_NO_NODE - S1 -> NUMA_NO_NODE After P2 and P3 is offlined, because S1 has no CPU now, the demotion order should have been changed to - S0 -> S1 - S1 -> NO_NODE but it isn't changed, because the order updating callback for CPU hotplug doesn't see the new nodemask. After that, if P1 is offlined, the demotion order is changed to the expected order as above. So in this patch, we added CPUHP_AP_MM_DEMOTION_ONLINE and CPUHP_MM_DEMOTION_DEAD to be called after CPUHP_AP_ONLINE_DYN and CPUHP_MM_VMSTAT_DEAD during CPU online and offline, and register the update function on them. Link: https://lkml.kernel.org/r/20210929060351.7293-1-ying.huang@intel.com Fixes: 884a6e5d ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Hansen authored
Once upon a time, the node demotion updates were driven solely by memory hotplug events. But now, there are handlers for both CPU and memory hotplug. However, the #ifdef around the code checks only memory hotplug. A system that has HOTPLUG_CPU=y but MEMORY_HOTPLUG=n would miss CPU hotplug events. Update the #ifdef around the common code. Add memory and CPU-specific #ifdefs for their handlers. These memory/CPU #ifdefs avoid unused function warnings when their Kconfig option is off. [arnd@arndb.de: rework hotplug_memory_notifier() stub] Link: https://lkml.kernel.org/r/20211013144029.2154629-1-arnd@kernel.org Link: https://lkml.kernel.org/r/20210924161255.E5FE8F7E@davehans-spike.ostc.intel.com Fixes: 884a6e5d ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Hansen authored
Patch series "mm/migrate: 5.15 fixes for automatic demotion", v2. This contains two fixes for the "automatic demotion" code which was merged into 5.15: * Fix memory hotplug performance regression by watching suppressing any real action on irrelevant hotplug events. * Ensure CPU hotplug handler is registered when memory hotplug is disabled. This patch (of 2): == tl;dr == Automatic demotion opted for a simple, lazy approach to handling hotplug events. This noticeably slows down memory hotplug[1]. Optimize away updates to the demotion order when memory hotplug events should have no effect. This has no effect on CPU hotplug. There is no known problem on the CPU side and any work there will be in a separate series. == Background == Automatic demotion is a memory migration strategy to ensure that new allocations have room in faster memory tiers on tiered memory systems. The kernel maintains an array (node_demotion[]) to drive these migrations. The node_demotion[] path is calculated by starting at nodes with CPUs and then "walking" to nodes with memory. Only hotplug events which online or offline a node with memory (N_ONLINE) or CPUs (N_CPU) will actually affect the migration order. == Problem == However, the current code is lazy. It completely regenerates the migration order on *any* CPU or memory hotplug event. The logic was that these events are extremely rare and that the overhead from indiscriminate order regeneration is minimal. Part of the update logic involves a synchronize_rcu(), which is a pretty big hammer. Its overhead was large enough to be detected by some 0day tests that watch memory hotplug performance[1]. == Solution == Add a new helper (node_demotion_topo_changed()) which can differentiate between superfluous and impactful hotplug events. Skip the expensive update operation for superfluous events. == Aside: Locking == It took me a few moments to declare the locking to be safe enough for node_demotion_topo_changed() to work. It all hinges on the memory hotplug lock: During memory hotplug events, 'mem_hotplug_lock' is held for write. This ensures that two memory hotplug events can not be called simultaneously. CPU hotplug has a similar lock (cpuhp_state_mutex) which also provides mutual exclusion between CPU hotplug events. In addition, the demotion code acquire and hold the mem_hotplug_lock for read during its CPU hotplug handlers. This provides mutual exclusion between the demotion memory hotplug callbacks and the CPU hotplug callbacks. This effectively allows treating the migration target generation code to act as if it is single-threaded. 1. https://lore.kernel.org/all/20210905135932.GE15026@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/20210924161251.093CCD06@davehans-spike.ostc.intel.com Link: https://lkml.kernel.org/r/20210924161253.D7673E31@davehans-spike.ostc.intel.com Fixes: 884a6e5d ("mm/migrate: update node demotion order on hotplug events") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nadav Amit authored
A race is possible when a process exits, its VMAs are removed by exit_mmap() and at the same time userfaultfd_writeprotect() is called. The race was detected by KASAN on a development kernel, but it appears to be possible on vanilla kernels as well. Use mmget_not_zero() to prevent the race as done in other userfaultfd operations. Link: https://lkml.kernel.org/r/20210921200247.25749-1-namit@vmware.com Fixes: 63b2d417 ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl") Signed-off-by: Nadav Amit <namit@vmware.com> Tested-by: Li Wang <liwang@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Xu authored
In RHEL's gating selftests we've encountered memory corruption in the uffd event test even with upstream kernel: # ./userfaultfd anon 128 4 nr_pages: 32768, nr_pages_per_cpu: 32768 bounces: 3, mode: rnd racing read, userfaults: 6240 missing (6240) 14729 wp (14729) bounces: 2, mode: racing read, userfaults: 1444 missing (1444) 28877 wp (28877) bounces: 1, mode: rnd read, userfaults: 6055 missing (6055) 14699 wp (14699) bounces: 0, mode: read, userfaults: 82 missing (82) 25196 wp (25196) testing uffd-wp with pagemap (pgsize=4096): done testing uffd-wp with pagemap (pgsize=2097152): done testing events (fork, remap, remove): ERROR: nr 32427 memory corruption 0 1 (errno=0, line=963) ERROR: faulting process failed (errno=0, line=1117) It can be easily reproduced when global thp enabled, which is the default for RHEL. It's also known as a side effect of commit 0db282ba ("selftest: use mmap instead of posix_memalign to allocate memory", 2021-07-23), which is imho right itself on using mmap() to make sure the addresses will be untagged even on arm. The problem is, for each test we allocate buffers using two allocate_area() calls. We assumed these two buffers won't affect each other, however they could, because mmap() could have found that the two buffers are near each other and having the same VMA flags, so they got merged into one VMA. It won't be a big problem if thp is not enabled, but when thp is agressively enabled it means when initializing the src buffer it could accidentally setup part of the dest buffer too when there's a shared THP that overlaps the two regions. Then some of the dest buffer won't be able to be trapped by userfaultfd missing mode, then it'll cause memory corruption as described. To fix it, do release_pages() after initializing the src buffer. Since the previous two release_pages() calls are after uffd_test_ctx_clear() which will unmap all the buffers anyway (which is stronger than release pages; as unmap() also tear town pgtables), drop them as they shouldn't really be anything useful. We can mark the Fixes tag upon 0db282ba as it's reported to only happen there, however the real "Fixes" IMHO should be 8ba6e864, as before that commit we'll always do explicit release_pages() before registration of uffd, and 8ba6e864 changed that logic by adding extra unmap/map and we didn't release the pages at the right place. Meanwhile I don't have a solid glue anyway on whether posix_memalign() could always avoid triggering this bug, hence it's safer to attach this fix to commit 8ba6e864. Link: https://lkml.kernel.org/r/20210923232512.210092-1-peterx@redhat.com Fixes: 8ba6e864 ("userfaultfd/selftests: reinitialize test context in each test") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1994931Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Li Wang <liwan@redhat.com> Tested-by: Li Wang <liwang@redhat.com> Reviewed-by: Axel Rasmussen <axelrasmussen@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Marco Giunta authored
When a Jieli Technology USB Webcam is connected, the video part works well, but the mic sound is speeded up. On dmesg there are messages about different rates from the runtime rates, warnings about volume resolution and lastly, the log is filled, every 5 seconds, with retire_capture_urb error messages. The mic works only when ep packet size is set to wMaxPacketSize (normal sound and no more retire_capture_urb error messages). Skipping reading sample rate, fixes the messages about different rates and forcing a volume resolution, fixes warnings about volume range. I have arbitrarily choosed the value (16): I read in a comment that there should be no more than 255 levels, so 4096 (max volume) / 16 = 0-255. Signed-off-by: Marco Giunta <giun7a@gmail.com> Link: https://lore.kernel.org/r/20211018162552.12082-1-giun7a@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 18 Oct, 2021 10 commits
-
-
Gaosheng Cui authored
Fix possible null-pointer dereference in audit_filter_rules. audit_filter_rules() error: we previously assumed 'ctx' could be null Cc: stable@vger.kernel.org Fixes: bf361231 ("audit: add saddr_fam filter field") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
-
Steven Rostedt (VMware) authored
While writing an email explaining the "bit = 0" logic for a discussion on making ftrace_test_recursion_trylock() disable preemption, I discovered a path that makes the "not do the logic if bit is zero" unsafe. The recursion logic is done in hot paths like the function tracer. Thus, any code executed causes noticeable overhead. Thus, tricks are done to try to limit the amount of code executed. This included the recursion testing logic. Having recursion testing is important, as there are many paths that can end up in an infinite recursion cycle when tracing every function in the kernel. Thus protection is needed to prevent that from happening. Because it is OK to recurse due to different running context levels (e.g. an interrupt preempts a trace, and then a trace occurs in the interrupt handler), a set of bits are used to know which context one is in (normal, softirq, irq and NMI). If a recursion occurs in the same level, it is prevented*. Then there are infrastructure levels of recursion as well. When more than one callback is attached to the same function to trace, it calls a loop function to iterate over all the callbacks. Both the callbacks and the loop function have recursion protection. The callbacks use the "ftrace_test_recursion_trylock()" which has a "function" set of context bits to test, and the loop function calls the internal trace_test_and_set_recursion() directly, with an "internal" set of bits. If an architecture does not implement all the features supported by ftrace then the callbacks are never called directly, and the loop function is called instead, which will implement the features of ftrace. Since both the loop function and the callbacks do recursion protection, it was seemed unnecessary to do it in both locations. Thus, a trick was made to have the internal set of recursion bits at a more significant bit location than the function bits. Then, if any of the higher bits were set, the logic of the function bits could be skipped, as any new recursion would first have to go through the loop function. This is true for architectures that do not support all the ftrace features, because all functions being traced must first go through the loop function before going to the callbacks. But this is not true for architectures that support all the ftrace features. That's because the loop function could be called due to two callbacks attached to the same function, but then a recursion function inside the callback could be called that does not share any other callback, and it will be called directly. i.e. traced_function_1: [ more than one callback tracing it ] call loop_func loop_func: trace_recursion set internal bit call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 traced_function_2: [ only traced by above callback ] call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 [ wash, rinse, repeat, BOOM! out of shampoo! ] Thus, the "bit == 0 skip" trick is not safe, unless the loop function is call for all functions. Since we want to encourage architectures to implement all ftrace features, having them slow down due to this extra logic may encourage the maintainers to update to the latest ftrace features. And because this logic is only safe for them, remove it completely. [*] There is on layer of recursion that is allowed, and that is to allow for the transition between interrupt context (normal -> softirq -> irq -> NMI), because a trace may occur before the context update is visible to the trace recursion logic. Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/ Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Jisheng Zhang <jszhang@kernel.org> Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com> Cc: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Fixes: edc15caf ("tracing: Avoid unnecessary multiple recursion checks") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Paolo Bonzini authored
The size of the GHCB scratch area is limited to 16 KiB (GHCB_SCRATCH_AREA_LIMIT), so there is no need for it to be a u64. This fixes a build error on 32-bit systems: i686-linux-gnu-ld: arch/x86/kvm/svm/sev.o: in function `sev_es_string_io: sev.c:(.text+0x110f): undefined reference to `__udivdi3' Cc: stable@vger.kernel.org Fixes: 019057bd ("KVM: SEV-ES: fix length of string I/O") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Hao Xiang authored
Hardware may or may not set exit_reason.bus_lock_detected on BUS_LOCK VM-Exits. Dealing with KVM_RUN_X86_BUS_LOCK in handle_bus_lock_vmexit could be redundant when exit_reason.basic is EXIT_REASON_BUS_LOCK. We can remove redundant handling of bus lock vmexit. Unconditionally Set exit_reason.bus_lock_detected in handle_bus_lock_vmexit(), and deal with KVM_RUN_X86_BUS_LOCK only in vmx_handle_exit(). Signed-off-by: Hao Xiang <hao.xiang@linux.alibaba.com> Message-Id: <1634299161-30101-1-git-send-email-hao.xiang@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Christian Borntraeger authored
Similar to commit 111d0bda ("tools/kvm_stat: Exempt time-based counters"), we should not show timer values in kvm_stat. Remove the new halt_wait_ns. Fixes: 87bcc5fa ("KVM: stats: Add halt_wait_ns stats for all architectures") Cc: Jing Zhang <jingzhangos@google.com> Cc: Stefan Raspl <raspl@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Stefan Raspl <raspl@linux.ibm.com> Message-Id: <20211006121724.4154-1-borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
WARN if the static keys used to track if any vCPU has disabled its APIC are left elevated at module exit. Unlike the underflow case, nothing in the static key infrastructure will complain if a key is left elevated, and because an elevated key only affects performance, nothing in KVM will fail if either key is improperly incremented. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211013003554.47705-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Revert a change to open code bits of kvm_lapic_set_base() when emulating APIC RESET to fix an apic_hw_disabled underflow bug due to arch.apic_base and apic_hw_disabled being unsyncrhonized when the APIC is created. If kvm_arch_vcpu_create() fails after creating the APIC, kvm_free_lapic() will see the initialized-to-zero vcpu->arch.apic_base and decrement apic_hw_disabled without KVM ever having incremented apic_hw_disabled. Using kvm_lapic_set_base() in kvm_lapic_reset() is also desirable for a potential future where KVM supports RESET outside of vCPU creation, in which case all the side effects of kvm_lapic_set_base() are needed, e.g. to handle the transition from x2APIC => xAPIC. Alternatively, KVM could temporarily increment apic_hw_disabled (and call kvm_lapic_set_base() at RESET), but that's a waste of cycles and would impact the performance of other vCPUs and VMs. The other subtle side effect is that updating the xAPIC ID needs to be done at RESET regardless of whether the APIC was previously enabled, i.e. kvm_lapic_reset() needs an explicit call to kvm_apic_set_xapic_id() regardless of whether or not kvm_lapic_set_base() also performs the update. That makes stuffing the enable bit at vCPU creation slightly more palatable, as doing so affects only the apic_hw_disabled key. Opportunistically tweak the comment to explicitly call out the connection between vcpu->arch.apic_base and apic_hw_disabled, and add a comment to call out the need to always do kvm_apic_set_xapic_id() at RESET. Underflow scenario: kvm_vm_ioctl() { kvm_vm_ioctl_create_vcpu() { kvm_arch_vcpu_create() { if (something_went_wrong) goto fail_free_lapic; /* vcpu->arch.apic_base is initialized when something_went_wrong is false. */ kvm_vcpu_reset() { kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) { vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE | MSR_IA32_APICBASE_ENABLE; } } return 0; fail_free_lapic: kvm_free_lapic() { /* vcpu->arch.apic_base is not yet initialized when something_went_wrong is true. */ if (!(vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE)) static_branch_slow_dec_deferred(&apic_hw_disabled); // <= underflow bug. } return r; } } } This (mostly) reverts commit 42122123. Fixes: 42122123 ("KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET") Reported-by: syzbot+9fc046ab2b0cf295a063@syzkaller.appspotmail.com Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211013003554.47705-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Peter Gonda authored
The refactoring in commit bb18a677 ("KVM: SEV: Acquire vcpu mutex when updating VMSA") left behind the assignment to svm->vcpu.arch.guest_state_protected; add it back. Signed-off-by: Peter Gonda <pgonda@google.com> [Delta between v2 and v3 of Peter's patch, which had already been committed; the commit message is my own. - Paolo] Fixes: bb18a677 ("KVM: SEV: Acquire vcpu mutex when updating VMSA") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
If allocation of rmaps fails, but some of the pointers have already been written, those pointers can be cleaned up when the memslot is freed, or even reused later for another attempt at allocating the rmaps. Therefore there is no need to WARN, as done for example in memslot_rmap_alloc, but the allocation *must* be skipped lest KVM will overwrite the previous pointer and will indeed leak memory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Randy Dunlap authored
Both arch/nios2/ and drivers/mmc/host/tmio_mmc.c define a macro with the name "CTL_STATUS". Change the one in arch/nios2/ to be "CTL_FSTATUS" (flags status) to eliminate the build warning. In file included from ../drivers/mmc/host/tmio_mmc.c:22: drivers/mmc/host/tmio_mmc.h:31: warning: "CTL_STATUS" redefined 31 | #define CTL_STATUS 0x1c arch/nios2/include/asm/registers.h:14: note: this is the location of the previous definition 14 | #define CTL_STATUS 0 Fixes: b31ebd80 ("nios2: Nios2 registers") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
-