- 31 Jul, 2020 12 commits
-
-
Emmanuel Grumbach authored
The low level driver adds its own opaque information in the BSS table in the cfg80211_bss structure. The low level driver may need to signal that this information is no longer relevant and needs to be recreated. Add an API to allow the low level driver to do that. iwlwifi needs this because it keeps there an information about the firmware's internal clock. This is kept in mac80211's struct ieee80211_bss::sync_device_ts. This information is populated while we scan, we add the internal firmware's clock to each beacon which allows us to program the firmware correctly after association so that it'll know when (in terms of its internal clock) the DTIM and TBTT will happen. When the firmware is reset this internal clock is reset as well and ieee80211_bss::sync_device_ts is no longer accurate. iwlwifi will call this new API any time the firmware is started. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20200625111524.3992-1-emmanuel.grumbach@intel.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707204548.GA9320@embeddedorSigned-off-by:
-
Christophe JAILLET authored
Re-write the end of 'nl80211_trigger_scan()' with a more standard, easy to understand and future proof version. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200712173551.274448-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
Since commit 5fe231e8 ("cfg80211: vastly simplify locking"), the 'unlock' label at the end of 'nl80211_trigger_scan()' is useless and misleading, because nothing is unlocked there. Direct return can be used instead of 'err = -<error code>; goto unlock;' construction. Remove this label and simplify code accordingly. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "of" in a comment. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: netdev@vger.kernel.org Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg <johannes@sipsolutions.net> Link: https://lore.kernel.org/r/20200715164325.9109-5-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
Drop doubled words "are" and "by" in comments. Change doubled "to to" to "to the". Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "by" in a comment. Change "operate in in" to "operate with in" as is used below. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "threshold" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words in several comments. Signed-off-by:
-
Julian Squires authored
nl80211 vendor netlink dumpit, like netlink_callback->dump, should signal successful completion by returning 0. Currently, that will just cause dumpit to be called again, possibly many times until an error occurs. Since skb->len is never going to be 0 by the time dumpit is called, the only way for dumpit to signal completion is by returning an error. If it returns a positive value, the current message is cancelled, but that positive value is returned and nl80211_vendor_cmd_dump gets called again. Fix that by passing a return value of 0 through. Signed-off-by:
Julian Squires <julian@cipht.net> Link: https://lore.kernel.org/r/20200720145033.401307-1-julian@cipht.net [reword commit message] Signed-off-by:
-
Colin Ian King authored
Currently rates_idx is being initialized with the value -1 and this value is never read so the initialization is redundant and can be removed. The next time the variable is used it is assigned a value that is returned a few statements later. Just return i - 1 and remove the need for rates_idx. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200722153830.959010-1-colin.king@canonical.comSigned-off-by:
-
Thomas Pedersen authored
Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by:
Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.comSigned-off-by:
-
- 29 Jul, 2020 28 commits
-
-
Brian Vazquez authored
This patch fixes: commit b9aaec8f ("fib: use indirect call wrappers in the most common fib_rules_ops") which didn't consider the case when CONFIG_IPV6_MULTIPLE_TABLES is not set. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: b9aaec8f ("fib: use indirect call wrappers in the most common fib_rules_ops") Signed-off-by:
Brian Vazquez <brianvv@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-07-29 This series contains updates to the ice driver only. Dave works around LFC settings not being preserved through link events. Fixes link issues with GLOBR reset and handling of multiple link events. Nick restores VF MSI-X after PCI reset. Kiran corrects the error code returned in ice_aq_sw_rules if the rule does not exist. Paul prevents overwriting of user set descriptors. Tarun adds masking before accessing rate limiting profile types and corrects queue bandwidth configuration. Victor modifies Tx queue scheduler distribution to spread more evenly across queue group nodes. Krzysztof sets need_wakeup flag for Tx AF_XDP. Brett allows VLANs in safe mode. Marcin cleans up VSIs on probe failure. Bruce reduces the scope of a variable. Ben removes a FW workaround. Tony fixes an unused parameter warning. ==================== Signed-off-by: -
Jisheng Zhang authored
mvneta has switched to phylink, so the comment should look like "We may have called phylink_speed_down before". Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Tony Nguyen authored
Depending on PAGE_SIZE, the following unused parameter warning can be reported: drivers/net/ethernet/intel/ice/ice_txrx.c: In function ‘ice_rx_frame_truesize’: drivers/net/ethernet/intel/ice/ice_txrx.c:513:21: warning: unused parameter ‘size’ [-Wunused-parameter] unsigned int size) The 'size' variable is used only when PAGE_SIZE >= 8192. Add __maybe_unused to remove the warning. Signed-off-by:Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com>
-
Ben Shelton authored
For the FW logging info AQ command, we currently set the ICE_AQ_FLAG_RD in order to work around a FW issue. This issue has been fixed so remove the workaround. Signed-off-by:
Ben Shelton <benjamin.h.shelton@intel.com> Tested-by:
-
Bruce Allan authored
The scope of the macro local variable 'i' can be reduced. Do so to avoid static analysis tools from complaining. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
-
Marcin Szycik authored
As part of ice_setup_pf_sw() a PF VSI is setup; release the VSI in case of failure. Signed-off-by:
Marcin Szycik <marcin.szycik@intel.com> Tested-by:
-
Brett Creeley authored
Currently the PF VSI's context parameters are left in a bad state when going into safe mode. This is causing VLAN traffic to not pass. Fix this by configuring the PF VSI to allow all VLAN tagged traffic. Also, remove redundant comment explaining the safe mode flow in ice_probe(). Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
-
Krzysztof Kazimierczak authored
This is a port of i40e commit 70563957 ("i40e: need_wakeup flag might not be set for Tx"). Quoting the original commit message: "The need_wakeup flag for Tx might not be set for AF_XDP sockets that are only used to send packets. This happens if there is at least one outstanding packet that has not been completed by the hardware and we get that corresponding completion (which will not generate an interrupt since interrupts are disabled in the napi poll loop) between the time we stopped processing the Tx completions and interrupts are enabled again. In this case, the need_wakeup flag will have been cleared at the end of the Tx completion processing as we believe we will get an interrupt from the outstanding completion at a later point in time. But if this completion interrupt occurs before interrupts are enable, we lose it and should at that point really have set the need_wakeup flag since there are no more outstanding completions that can generate an interrupt to continue the processing. When this happens, user space will see a Tx queue need_wakeup of 0 and skip issuing a syscall, which means will never get into the Tx processing again and we have a deadlock." As a result, packet processing stops. This patch introduces a fix for this issue, by always setting the need_wakeup flag at the end of an interrupt processing. This ensures that the deadlock will not happen. Signed-off-by:
Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com> Tested-by:
-
Victor Raj authored
Distribute the Tx queues evenly across all queue groups. This will help the queues to get more equal sharing among the queues when all are in use. In the previous algorithm, the next queue group node will be picked up only after the previous one filled with max children. For example: if VSI is configured with 9 queues, the first 8 queues will be assigned to queue group 1 and the 9th queue will be assigned to queue group 2. The 2 queue groups split the bandwidth between them equally (50:50). The first queue group node will share the 50% bandwidth with all of its children (8 queues). And the second queue group node will share the entire 50% bandwidth with its only children. The new algorithm will fix this issue. Signed-off-by:
Victor Raj <victor.raj@intel.com> Tested-by:
-
Tarun Singh authored
By default the queues are configured in legacy mode. The default BW settings for legacy/advanced modes are different. The existing code was using the advanced mode default value of 1 which was incorrect. This caused the unbalanced BW sharing among siblings. The recommended default value is applied. Signed-off-by:
Tarun Singh <tarun.k.singh@intel.com> Tested-by:
-
Tarun Singh authored
Mask bits before accessing the profile type field. Signed-off-by:
-
Paul M Stillwell Jr authored
If a user sets the value of the TX or RX descriptors to some non-default value using 'ethtool -G' then we need to not overwrite the values when we rebuild the VSI. The VSI rebuild could happen as a result of a user setting the number of queues via the 'ethtool -L' command. Fix this by checking to see if the value we have stored is non-zero and if it is then don't change the value. Signed-off-by:
Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by:
-
Kiran Patil authored
Return ICE_ERR_DOES_NOT_EXIST return code if admin command error code is ICE_AQ_RC_ENOENT (not exist). ice_aq_sw_rules is used when switch rule is getting added/deleted/updated. In case of delete/update switch rule, admin command can return ICE_AQ_RC_ENOENT error code if such rule does not exist, hence return ICE_ERR_DOES_NOT_EXIST error code from ice_aq_sw_rule, so that caller of this function can decide how to handle ICE_ERR_DOES_NOT_EXIST. Signed-off-by:
Kiran Patil <kiran.patil@intel.com> Tested-by:
-
Nick Nunley authored
During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability register will be cleared. This can lead to issues when a VF is assigned to a VM because in these cases the VF driver receives no indication of the PF PCI error/reset and additionally it is incapable of restoring the cleared flag in the hypervisor configuration space without fully reinitializing the driver interrupt functionality. Since the VF driver is unable to easily resolve this condition on its own, restore the VF MSI-X flag during the PF PCI reset handling. Signed-off-by:
Nick Nunley <nicholas.d.nunley@intel.com> Tested-by:
-
Dave Ertman authored
When the driver experiences a link event (especially link up) there can be multiple events generated. Some of these are link fault and still have a state of DOWN set. The problem happens when the link comes UP during the PF driver handling one of the LINK DOWN events. The status of the link is updated and is now seen as UP, so when the actual LINK UP event comes, the port information has already been updated to be seen as UP, even though none of the UP activities have been completed. After the link information has been updated in the link handler and evaluated for MEDIA PRESENT, if the state of the link has been changed to UP, treat the DOWN event as an UP event since the link is now UP. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
-
Dave Ertman authored
After a GLOBR, the link was broken so that a link up situation was being seen as a link down. The problem was that the rebuild process was updating the port_info link status without doing any of the other things that need to be done when link changes. This was causing the port_info struct to have current "UP" information so that any further UP interrupts were skipped as redundant. The rebuild flow should *not* be updating the port_info struct link information, so eliminate this and leave it to the link event handling code. Signed-off-by:
-
Dave Ertman authored
There is a bug where the LFC settings are not being preserved through a link event. The registers in question are the ones that are touched (and restored) when a set_local_mib AQ command is performed. On a link-up event, make sure that a set_local_mib is being performed. Move the function ice_aq_set_lldp_mib() from the DCB specific ice_dcb.c to ice_common.c so that the driver always has access to this AQ command. Signed-off-by:
-
David S. Miller authored
Jisheng Zhang says: ==================== net: stmmac: improve WOL Currently, stmmac driver relies on the HW PMT to support WOL. We want to support phy based WOL. patch1 is a small improvement to disable WAKE_MAGIC for PMT case if no pmt_magic_frame. patch2 and patch3 are two prepation patches. patch4 implement the phy based WOL patch5 tries to save a bit energy if WOL is enabled. ==================== Signed-off-by: -
Jisheng Zhang authored
When WoL is enabled and the machine is powered off, the PHY remains waiting for wakeup events at max speed, which is a waste of energy. Slow down the PHY speed before stopping the ethernet if WoL is enabled, Signed-off-by:
-
Jisheng Zhang authored
Currently, the stmmac driver WOL implementation relies on MAC's PMT feature. We have a case: the MAC HW doesn't enable PMT, instead, we rely on the phy to support WOL. Implement the support for this case. Signed-off-by:
-
Jisheng Zhang authored
This is to prepare WOL support with phy. Compared with WOL implementation which relies on the MAC's PMT features, in phy supported WOL case, device_may_wakeup() may also be true, but we should not call mac's pmt() function if HW doesn't enable PMT. And during resume, we should call phylink_start() if PMT is disabled. Signed-off-by:
-
Jisheng Zhang authored
If !device_can_wakeup(), there's no need to futher check. And return -EOPNOTSUPP rather than -EINVAL if !device_can_wakeup(). Signed-off-by:
-
Jisheng Zhang authored
Remove WAKE_MAGIC from supported modes if the HW capability register shows no support for pmt_magic_frame. Signed-off-by:
-
David S. Miller authored
Linus Walleij says: ==================== RTL8366 VLAN callback fixes While we are pondering how to make the core set up the VLANs the right way, let's merge the uncontroversial fixes. ==================== Signed-off-by: -
Linus Walleij authored
Alter the rtl8366_vlan_add() to call rtl8366_set_vlan() inside the loop that goes over all VIDs since we now properly support calling that function more than once. Augment the loop to postincrement as this is more intuitive. The loop moved past the last VID but called rtl8366_set_vlan() with the port number instead of the VID, assuming a 1-to-1 correspondence between ports and VIDs. This was also a bug. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
The RTL8366 would not handle adding new members (ports) to a VLAN: the code assumed that ->port_vlan_add() was only called once for a single port. When intializing the switch with .configure_vlan_while_not_filtering set to true, the function is called numerous times for adding all ports to VLAN1, which was something the code could not handle. Alter rtl8366_set_vlan() to just |= new members and untagged flags to 4k and MC VLAN table entries alike. This makes it possible to just add new ports to a VLAN. Put in some helpful debug code that can be used to find any further bugs here. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by:
-
Brian Vazquez authored
This avoids another inderect call per RX packet which save us around 20-40 ns. Changelog: v1 -> v2: - Move declaraions to fib_rules.h to remove warnings Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
