- 16 Nov, 2021 1 commit
-
-
Srinivas Kandagatla authored
Q6PRM clks need to be disabled using PRM_CMD_RELEASE_HW_RSC dsp command rather then using PRM_CMD_RSP_REQUEST_HW_RSC cmd with rate set to zero. DSP will throw errors if we try to disable the clock using existing code. Fix this by properly handling the clk release. Fixes: 9a0e5d6f ("ASoC: qdsp6: audioreach: add q6prm support") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-2-srinivas.kandagatla@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 15 Nov, 2021 2 commits
-
-
Simon Trimmer authored
This patch fixes the static analysis warning as it is correctly indicating a possible code path, it cannot know that for the affected firmware versions subname would always be NULL. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211115120154.56782-1-simont@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
Changes from ChiYuan Huang <cy_huang@richtek.com> to fix a couple of bugs and add a new device ID/quirk for the rt9120s to the driver.
-
- 12 Nov, 2021 9 commits
-
-
Kuninori Morimoto authored
commit d5bb69dc ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination") updated DMAEngine API _all() to _sync(), but it should be _async(). _all() and _async() are almost same, the difference is only return error code. _sync() will call dmaengine_synchronize() and will be kernel panic. This patch is needed for v5.15 or later. [ 27.293264] BUG: scheduling while atomic: irq/130-ec70000/131/0x00000003 [ 27.300084] 2 locks held by irq/130-ec70000/131: [ 27.304743] #0: ffff0004c274d908 (&group->lock){....}-{2:2}, at: _snd_pcm_stream_lock_irqsave+0x48/0x54 [ 27.314344] #1: ffff0004c1788c60 (&priv->lock#2){....}-{2:2}, at: rsnd_soc_dai_trigger+0x70/0x7bc [ 27.323409] irq event stamp: 206 [ 27.326664] hardirqs last enabled at (205): [<ffff80001082de50>] _raw_spin_unlock_irq+0x50/0xa0 [ 27.335529] hardirqs last disabled at (206): [<ffff80001082d9e4>] _raw_spin_lock_irqsave+0xc4/0xd0 [ 27.344564] softirqs last enabled at (0): [<ffff800010037324>] copy_process+0x644/0x1b10 [ 27.352819] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 27.359142] CPU: 0 PID: 131 Comm: irq/130-ec70000 Not tainted 5.14.0-rc1+ #918 [ 27.366429] Hardware name: Renesas H3ULCB Kingfisher board based on r8a77950 (DT) [ 27.373975] Call trace: [ 27.376442] dump_backtrace+0x0/0x1b4 [ 27.380141] show_stack+0x24/0x30 [ 27.383488] dump_stack_lvl+0x8c/0xb8 [ 27.387184] dump_stack+0x18/0x34 [ 27.390528] __schedule_bug+0x8c/0x9c [ 27.394224] __schedule+0x790/0x8dc [ 27.397746] schedule+0x7c/0x110 [ 27.401003] synchronize_irq+0x94/0xd0 [ 27.404786] rcar_dmac_device_synchronize+0x20/0x2c [ 27.409710] rsnd_dmaen_stop+0x50/0x64 [ 27.413495] rsnd_soc_dai_trigger+0x554/0x7bc [ 27.417890] snd_soc_pcm_dai_trigger+0xe8/0x264 Cc: <stable@kernel.org> Fixes: commit d5bb69dc ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination") Link: https://lore.kernel.org/r/TY2PR01MB3692889E1A7476C4322CC296D8AE9@TY2PR01MB3692.jpnprd01.prod.outlook.comReported-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mtmfz36o.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Arnd Bergmann authored
With CONFIG_SND_SOC_SOF_COMPRESS=m, the compression code is not built into a the main SOF driver when that is built-in: x86_64-linux-ld: sound/soc/sof/ipc.o: in function `ipc_stream_message': ipc.c:(.text+0x5a2): undefined reference to `snd_sof_compr_fragment_elapsed' x86_64-linux-ld: sound/soc/sof/topology.o: in function `sof_dai_load': topology.c:(.text+0x32d1): undefined reference to `snd_sof_compr_init_elapsed_work' x86_64-linux-ld: topology.c:(.text+0x32e1): undefined reference to `snd_sof_compr_init_elapsed_work' Make this a 'bool' symbol so it just decides whether the code gets built at all. Fixes: 858f7a5c ("ASoC: SOF: Introduce fragment elapsed notification API") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211108111132.3800548-1-arnd@kernel.orgSigned-off-by:
-
AngeloGioacchino Del Regno authored
When registering the mt8173-afe-pcm driver, we are also adding two components: one is for the PCM DAIs and one is for the HDMI DAIs, but when debugfs is enabled, we're getting the following issue: [ 17.279176] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present! [ 17.288345] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present! To overcome to that without any potentially big rewrite of this driver, similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to the components before actually adding them. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.comSigned-off-by:
-
Derek Fang authored
Sometimes, end-users change the jack type under suspending, so it needs to re-detect the combo jack type after resuming to avoid any unexpected behaviors. Signed-off-by:
Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20211109095450.12950-2-derek.fang@realtek.comSigned-off-by:
-
Derek Fang authored
When the system suspends, the codec driver will set SAR to power saving mode if a headset is plugged in. There is a chance to generate an unexpected IRQ, and leads to issues after resuming such as noise from OMTP type headsets. Signed-off-by:
-
Jack Yu authored
Revert 'I2S Reference' to SOC_ENUM_EXT because the settings are specific for some platforms, the default setting for 'I2S Reference' does nothing, only some SoC platform need to configure it. Previous 'I2S Reference' in SOC_ENUM format only toggles one bit of RT1011_TDM1_SET_1 register, which isn't enough for specific platform. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20211111091705.20879-1-jack.yu@realtek.comSigned-off-by:
-
ChiYuan Huang authored
Use device id reg to be compatible with rt9120 and rt9120s. Signed-off-by:
ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1636515921-31694-4-git-send-email-u0084500@gmail.comSigned-off-by:
-
ChiYuan Huang authored
If fs is divided by 48, to make audio clock sync rate correct, internal sync function have be disabled. Signed-off-by:
-
ChiYuan Huang authored
Update internal ocp level to correct value. Even the wrong ocp setting can also make the sound output, but the power cannot match the IC capability. Signed-off-by:
-
- 05 Nov, 2021 12 commits
-
-
Gongjun Song authored
This product supports a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
Gongjun Song <gongjun.song@intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-10-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Gongjun Song authored
Product audio hardware configuration is rt711 on link2, two rt1316s on link0 and link1, rt714 on link 3. Signed-off-by:
-
Gongjun Song authored
This product supports a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Signed-off-by:
-
Gongjun Song authored
Product audio hardware configuration is rt1316 on link2, rt714 on link 3. Signed-off-by:
-
Gongjun Song authored
This product supports SoundWire capture from local microphones and one SoundWire amplifier(no headset codec). Signed-off-by:
-
Gongjun Song authored
This product supports a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Signed-off-by:
-
Gongjun Song authored
Both products support a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Signed-off-by:
-
Gongjun Song authored
New product audio hardware configuration is rt714 on link0, two rt1316s on link1 and link2 Signed-off-by:
-
Gongjun Song authored
This product supports SoundWire capture from local microphones and two SoundWire amplifiers(no headset codec). Signed-off-by:
-
AngeloGioacchino Del Regno authored
Some RT5645 and RT5650 powered platforms are using "Ext Spk" instead of "Speaker", and this is also reflected in alsa-lib configurations for the generic RT5645 usecase manager configs. Rename the "Speaker" control to "Ext Spk" in order to be able to make the userspace reuse/inherit the same configurations also for this machine, along with the others. Signed-off-by:
-
Takashi Iwai authored
The recent fix for DAPM to correct the kctl change notification by the commit 5af82c81 ("ASoC: DAPM: Fix missing kctl change notifications") caused other regressions since it changed the behavior of snd_soc_dapm_set_pin() that is called from several API functions. Formerly it returned always 0 for success, but now it returns 0 or 1. This patch addresses it, restoring the old behavior of snd_soc_dapm_set_pin() while keeping the fix in snd_soc_dapm_put_pin_switch(). Fixes: 5af82c81 ("ASoC: DAPM: Fix missing kctl change notifications") Reported-by:
Yu-Hsuan Hsu <yuhsuan@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211105090925.20575-1-tiwai@suse.deSigned-off-by:
-
Kai Vehmanen authored
If codec is in runtime suspend, but controller is not, hotplug events are missed as the codec has no way to alert the controller. Problem does not occur if both controller and codec are active, or when both are suspended. An easy way to reproduce is to play an audio stream on one codec (e.g. to HDMI/DP display codec), wait for other HDA codec to go to runtime suspend, and then plug in a headset to the suspended codec. The jack event is not reported correctly in this case. Another way to reproduce is to force controller to stay active with "snd_sof_pci.sof_pci_debug=0x1" Fix the issue by reconfiguring the WAKEEN register when powering up/down individual links, and handling control events in the interrupt handler. Fixes: 87fc20e4 ("ASoC: SOF: Intel: hda: use hdac_ext fine-grained link management") Reported-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211105111655.668777-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
- 04 Nov, 2021 1 commit
-
-
Peter Ujfalusi authored
The second parameter for snd_sof_ipc_set_get_comp_data() is ipc_cmd, not ipc_ctrl_type and the type is u32. Fixes: 756bbe42 ("ASoC: SOF: Handle control change notification from firmware") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Acked-by:
-
- 02 Nov, 2021 1 commit
-
-
Charles Keepax authored
Currently the internal monitor sources are input widgets, which means if the card is set to fully routed these will not enable unless connected to something in the machine driver. However, all these are internal monitor signals so it makes no sense to connect them to something in the machine driver. As such switch them to siggen widgets which will have the same behaviour except not require external linkage on a fully routed card. Signed-off-by:
David Rhodes <drhodes@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211029214028.401284-1-drhodes@opensource.cirrus.comSigned-off-by:
-
- 29 Oct, 2021 14 commits
-
-
Mark Brown authored
Support multiple headphone drivers in same machine driver. In this case, both rt5682 and rt5682s are supported and enumerated by different ACPI HID "10EC5682" and "RTL5682". V2 Changes: - remove useless 'NULL', 'false' in if-condition - can use 'comp_ids' field alone to enumerate driver - add comma to the end of entry in structure initialization - keep the table of byt/cht/cml/icl untouched V3 Changes: - upstreamd from SOF github, PR#3200 - use new compatiable IDs to shrink the enumerate table of BYT and CHT - add 'const' to snd_soc_acpi_codecs structures V4 Changes: - add signoff to patch 4~6 V5 Changes: - none, just rebase for patch 3 conflict Brent Lu (3): ASoC: soc-acpi: add comp_ids field for machine driver matching ASoC: Intel: sof_rt5682: detect codec variant in probe function ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s Pierre-Louis Bossart (3): ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs include/sound/soc-acpi.h | 3 + sound/soc/intel/boards/sof_rt5682.c | 34 ++------- .../intel/common/soc-acpi-intel-adl-match.c | 11 ++- .../intel/common/soc-acpi-intel-bxt-match.c | 2 +- .../intel/common/soc-acpi-intel-byt-match.c | 68 +++++++----------- .../intel/common/soc-acpi-intel-cht-match.c | 69 +++++++------------ .../intel/common/soc-acpi-intel-cml-match.c | 8 +-- .../intel/common/soc-acpi-intel-glk-match.c | 2 +- .../intel/common/soc-acpi-intel-jsl-match.c | 43 ++++-------- .../intel/common/soc-acpi-intel-kbl-match.c | 12 ++-- .../intel/common/soc-acpi-intel-skl-match.c | 2 +- .../intel/common/soc-acpi-intel-tgl-match.c | 11 ++- sound/soc/soc-acpi.c | 24 ++++++- 13 files changed, 119 insertions(+), 170 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: Sanity checks and soc-topology updates" from Cezary Rojewski <cezary.rojewski@intel.com>: Couple of soc-topology related changes and a use-after-free fix. Said fix and two sanity checks for soc-topology lead the way. While the use-after-free is quite obvious, the sanity checks are here to cover for cases where user malformed the topology file -or- access to filesystem somehow got interrupted during copy operation. We shouldn't be reading outside the file boundary. Afterward a change to soc_tplg_add_kcontrol(): device being passed to soc_tplg_add_dcontrol() from comp->dev to tplg->dev which corrects dev_xxx() invoked later on. Also, device used for topology memory allocations from component->dev to component->card->dev so memory gets freed each time card device (usually platform device) is removed rather than the component device what may happen less frequently. Dummy component gets smarter and no longer overrides hw_params if there are other components accociated with related struct snd_soc_pcm_runtime instance. Amadeusz Sławiński (5): ASoC: core: Remove invalid snd_soc_component_set_jack call ASoC: topology: Check for dapm widget completeness ASoC: topology: Use correct device for prints ASoC: topology: Change topology device to card device ASoC: Stop dummy from overriding hwparams Cezary Rojewski (1): ASoC: topology: Add header payload_size verification sound/soc/soc-core.c | 3 --- sound/soc/soc-topology.c | 34 ++++++++++++++++++++++++++++++---- sound/soc/soc-utils.c | 13 +++++++++++++ 3 files changed, 43 insertions(+), 7 deletions(-) -- 2.25.1
-
Christophe JAILLET authored
If we return before the end of the 'for_each_child_of_node()' iterator, the reference taken on 'np' must be released. Add the missing 'of_node_put()' call. Fixes: c413983e ("ASoC: rsnd: adjust disabled module") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Uwe Kleine-König authored
Up to now aic3x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211019074125.3812513-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Pierre-Louis Bossart authored
'const' qualifiers are missing on some platforms, add as needed. Signed-off-by:
Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211029171409.611600-7-brent.lu@intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
We have multiple entries for the same codecs, use the new compatible IDs to have a single entry. Signed-off-by:
-
Pierre-Louis Bossart authored
We have multiple entries for the same codecs, use the new compatible IDs to have a single entry. Signed-off-by:
-
Brent Lu authored
Use comp_ids field to enumerate rt5682/rt5682s headphone codec for JSL/TGL/ADL devices and remove redundant entries in tables. Signed-off-by:
-
Brent Lu authored
Detect whether the headphone codec is ALC5682I-VS or not in probe function so we don't need to duplicate all board configs for this new variant. Signed-off-by:
-
Brent Lu authored
A machine driver needs to be enumerated by more than one ACPI HID if it supports second headphone driver (i.e. rt5682 and rt5682s). However, the id field in snd_soc_acpi_mach structure could contain only one HID. By adding a 'comp_ids' field which can contain several HIDs, we can enumerate a machine driver by multiple ACPI HIDs. Signed-off-by:
-
Trevor Wu authored
This patch adds document for mt8195 board with mt6359, rt1011 and rt5682 Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20211020071428.14297-3-trevor.wu@mediatek.comSigned-off-by:
-
Trevor Wu authored
This patch adds support for mt8195 board with mt6359, rt1011 and rt5682. Signed-off-by:
-
Amadeusz Sławiński authored
In case that there are other components assigned to runtime device, depending on order dummy component can override their params with its own, which shouldn't happen. Check if there are any other components assigned to rtd and if so, skip setting hwparams. Occurs when using topology where 'snd-soc-dummy' gets assigned by default as codec and platform component. Alternative approach would be to copy whole dummy handling and rename it to "snd-soc-null" or something similar. And remove hwparams assignment to make it really do nothing. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20211015161257.27052-7-cezary.rojewski@intel.comSigned-off-by:
-
Amadeusz Sławiński authored
Topology needs device for prints and resource allocation. So far, component->dev is used. However, this may lead to high memory use in model where card is an independent driver which can be reloaded and topology is loaded from component's probe() method. Every time machine driver is reloaded topology is being loaded anew, each time allocating new memory. Said memory will only be freed when component itself is being freed. Address the problem by tying topology to component->card->dev instead, so memory occupied by the topology is freed whenever related machine device gets removed. Signed-off-by:
-
