Add bindings for Qualcomm X1E80100 SoC Low Power Audio SubSystem (LPASS)
RX macro codec, which looks like compatible with earlier SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231211123104.72963-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Fix few trivial code style issues, pointed out by checkpatch, so they do
not get copied to new code (when old code is used as template):

  WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeea ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
  WARNING: function definition argument 'struct platform_device *' should also have an identifier name
  ERROR: code indent should use tabs where possible
  WARNING: please, no spaces at the start of a line
  WARNING: Missing a blank line after declarations
  WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231204100048.211800-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Some components like platforms don't have DAIs. If the active count of
these components is ignored pinctrl may be wrongly selected between
default and sleep state. So need to increment or decrement the active
count for components without DAIs to avoid it.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20231204111532.3165-1-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Document bindings for the Qualcomm X1E80100 SoC sound card.  The
bindings are the same as for other newer Qualcomm ADSP sound cards, thus
keep them in existing qcom,sm8250.yaml file, even though Linux driver is
separate.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20231204100116.211898-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add sound machine driver for the soundcards on Qualcomm X1E80100 SoC,
supporting up to four channel audio playback over Soundwire bus.  The
driver is based on existing sc8280xp.c driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231204100116.211898-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add pm ops for renoir platform.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://msgid.link/r/20231215130300.1247475-1-Syed.SabaKareem@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:

We should query FW config if context save is supported, and no need
to reload FW if hda->booted_from_imr and ipc4_data->fw_context_save
are true.

rm the second \#include <linux/of.h>
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Link: https://msgid.link/r/202312151713+0800-wangjinchao@xfusion.comSigned-off-by: Mark Brown <broonie@kernel.org>

remove the second \#include "../sof-audio.h"
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Link: https://msgid.link/r/202312151719+0800-wangjinchao@xfusion.comSigned-off-by: Mark Brown <broonie@kernel.org>

If fw_context_save is defined by fw, driver can skip library reload on
d3 exit or reload library.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-4-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Driver queries fw_context_save feature when fw is ready and can skip
library reload with this feature since library is saved in persistent
memory. The default value of fw_context_save is true unless fw reports
false.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-3-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update fw_config_params in driver.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-2-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Document new playback-only and capture-only flags which can be used
when dai link can only support just one direction: playback or capture
but not both.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/20231128081119.106360-3-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

We need this to support MICFIL PDM found on i.MX8MP where the DAI link
supports only capture direction.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/20231128081119.106360-2-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

If probe is defered no error should be printed. Use dev_err_probe() to
have it muted.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/b941a404d97c01ef3e30c49925927b9a7dafeb19.1702422544.git.daniel@makrotopia.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Fixes: bbbc18d8 ("ASoC: cs42l43: Allow HP amp to cool off after current limit")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231212104149.2388753-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Whilst occasional current limiting is fine, constant current limiting
should be avoided. Add a back off system that will disable the
headphone amp, if a lot of current limiting is seen in a short window
of time.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231211160019.2034442-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

This fix is based on commit [1] fixing click and pop sounds during
SoundWire port start because PA is left unmuted.

making use of new mute_unmute_on_trigger flag and removing unmute
at PA setup, removes the Click/Pop issue at SoundWire enable.

[1] 805ce818 ("ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag")

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231211-topic-sm8x50-upstream-wsa884x-fix-plop-v1-1-0dc630a19172@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) WSA
macro codec, which looks like compatible with earlier SM8550.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20231129113014.38837-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) VA
macro codec, which looks like compatible with earlier SM8550.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231129113014.38837-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) TX
macro codec, which looks like compatible with earlier SM8550.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20231129113014.38837-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) RX
macro codec, which looks like compatible with earlier SM8550.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20231129113014.38837-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add support four channel streams.  Map channel 3 and 4 to left/right
surround ("quad(side)" from ffmpeg standard channel list) to match what
is in qdsp6/q6dsp-common.c driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231130180758.212172-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

q6apm.h header already defines channel mapping values, so drop
duplicated devices from audioreach.h.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231130180758.212172-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Move code assigning channel mapping values to a common helper function.
This simplifies three out of four cases, with the last case using
incompatible type (uint16_t array instead of uint8_t array).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231130180758.212172-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The GPIO descriptor conversion patch left an unitialized ret behind
by mistake, fix it by getting rid of the variable altogether.

Fixes: 10a366f3 ("ASoC: wm1250-ev1: Convert to GPIO descriptors")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312090953.DiUo3mue-lkp@intel.com/Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231209-descriptors-sound-wlf-v1-1-5b885ce43ae1@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Linus Walleij <linus.walleij@linaro.org>:

This converts the remaining Wolfson ASoC codecs to
use GPIO descriptors.

These Wolfson codecs are mostly used with different
Samsung S3C (especially Cragganmore 6410) board files,
so the in-tree users are fixed up in the process.

This converts the WM8996 codec to use GPIO descriptors, an a similar
way to WM5100.

The driver is instantiating a GPIO chip named wm8996, and we get
rid of the base address for the GPIO chip from the platform data and
just use dynamic numbering. Move base and ngpio into the static
gpio_chip template.

Fix up the only in-tree user which is the Cragganmore 6410 module.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-5-c4dab6f521ec@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This converts the WM5100 codec to use GPIO descriptors, a pretty
straight-forward conversion with the following peculiarities:

- The driver is instantiating a GPIO chip named wm5100, and the
  headphone polarity detection GPIO is lifted from there. We add
  this to the GPIO descriptor table as well, and we can then get
  rid of also the base address for the GPIO chip from the
  platform data and just use dynamic numbering.

- Fix up the only in-tree user which is the Cragganmore 6410
  module.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-4-c4dab6f521ec@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This converts the WM2200 codec to use GPIO descriptors.
This is a pretty straight-forward conversion, and it also
switches over the single in-tree user in the S3C
Cragganmore module for S3C 6410.

This coded does not seem to get selected or be selectable
through Kconfig, I had to hack another soundcard Kconfig
entry to select it for compile tests.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-3-c4dab6f521ec@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This converts the WM1250-EV1 codec to use GPIO descriptors.
It turns out that the platform data was only used to pass some
global GPIO numbers from a board file, so we get rid of this
and also switch over the single in-tree user in the S3C
Cragganmore module for S3C 6410.

The driver obtains two GPIO lines named OSR and master and just
pull them low, we leave this behaviour as it was.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-2-c4dab6f521ec@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This converts the WM0010 codec to use GPIO descriptors.
It's a pretty straight-forward conversion also switching over
the single in-tree user in the S3C Cragganmore module
for S3C 6410.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231208-descriptors-sound-wlf-v1-1-c4dab6f521ec@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The > comparison should be >= to avoid writing one element beyond the end
of the dai_link->ch_maps[] array.  The dai_link->ch_maps[] array is
allocated in graph_parse_node_multi() and it has "nm_max" elements.

Fixes: e2de6808 ("ASoC: audio-graph-card2: add CPU:Codec = N:M support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1032216f-902f-48f9-aa49-9d5ece8e87f2@moroto.mountainSigned-off-by: Mark Brown <broonie@kernel.org>

Modify acp config flag read logic from ACP v7.0 onwards.
Instead of reading from DMI table match entry, read the
config flag value from BIOS ACPI table.
This will remove updating DMI table when new platform support
is added.
Use FLAG_AMD_LEGACY_ONLY_DMIC flag as default one.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20231207045505.1519151-1-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
   the hdac driver is probed at this point

During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.

On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl

The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:

1. snd_hdac_device_register()
   the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
   will be a NOP as the module is already loaded

Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:

1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()

This way at the hdac driver probe all parameters will be set in all cases.

Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4a ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some platforms doesn't have reference mclk pin to codec,
so set bclk as a clk source for rt5682s codec pll in tdm mode.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-7-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some platforms doesn't have reference mclk pin to codec,
so set bclk as a clk source for rt5682s codec pll in tdm mode.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-7-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Enable dpcm_capture for amplifier codec MAX98388
for reference stream capture in smart amplifier case.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-6-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add i2s bt support for sof-nau8821-max sound card.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-5-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add sof_bt cpu id and create dailink for i2s bt instance in
acp common machine driver.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-4-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>