- 10 Aug, 2023 18 commits
-
-
Hans Verkuil authored
The CEC interrupt is only needed if userspace wants to monitor the CEC pin for an unconfigured CEC device. That gives it the most precise CEC pin debugging results. This avoids a corner case where the interrupt is enabled for a short period when the adapter is about to be configured. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Hans Verkuil authored
Since the CEC pin framework now keeps track of the interrupt and calls disable_irq when the kthread stops, there is no longer any need for the cec-gpio driver to do this in the free callback. So drop this code. Signed-off-by:
-
Hans Verkuil authored
The CEC pin framework needs a bit more control over the interrupt handling: make sure that the disable_irq op is called even if the device node is unregistered, log the state of the interrupt in debugfs, and disable the interrupt when the kernel thread is stopped. Signed-off-by:
-
Hans Verkuil authored
Use IRQF_NO_AUTOEN rather than manually disabling the requested interrupt. Signed-off-by:
-
Hans Verkuil authored
Describe the new callbacks and clarify when the adap->lock mutex is held or not. Signed-off-by:
-
Hans Verkuil authored
The adap_configured() callback was called with the adap->lock mutex held if the 'configured' argument was false, and without the adap->lock mutex held if that argument was true. That was very confusing, and so split this up in a adap_unconfigured() callback and a high-level configured() callback. This also makes it easier to understand when the mutex is held: all low-level adap_* callbacks are called with the mutex held. All other callbacks are called without that mutex held. Signed-off-by:
-
Hans Verkuil authored
A potential deadlock was found by Zheng Zhang with a local syzkaller instance. The problem is that when a non-blocking CEC transmit is canceled by calling cec_data_cancel, that in turn can call the high-level received() driver callback, which can call cec_transmit_msg() to transmit a new message. The cec_data_cancel() function is called with the adap->lock mutex held, and cec_transmit_msg() tries to take that same lock. The root cause is that the received() callback can either be used to pass on a received message (and then adap->lock is not held), or to report a canceled transmit (and then adap->lock is held). This is confusing, so create a new low-level adap_nb_transmit_canceled callback that reports back that a non-blocking transmit was canceled. And the received() callback is only called when a message is received, as was the case before commit f9d0ecbf ("media: cec: correctly pass on reply results") complicated matters. Reported-by:
Zheng Zhang <zheng.zhang@email.ucr.edu> Signed-off-by:
-
Sakari Ailus authored
Document that sub-device notifiers are now registered using v4l2_async_subdev_nf_init(). No documentation is changed as it seems that sub-device notifiers were not documented apart from kernel-doc comments. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743 Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC Signed-off-by:
-
Sakari Ailus authored
Set the v4l2_device already in async notifier init, so struct device related to it will be available before the notifier is registered. This requires separating notifier initialisation into two functions, one that takes v4l2_device as its argument, v4l2_async_nf_init and v4l2_async_subdev_nf_init, for sub-device notifiers. Registering the notifier will use a single function, v4l2_async_nf_register. This is done in order to make struct device available earlier, during construction of the async connections, for sensible debug prints. Signed-off-by:
-
Sakari Ailus authored
Initialise V4L2 async notifier and parse DT for async sub-devices later, just before registering the notifier. This way the device can be made available to the V4L2 async framework from the notifier init time onwards. A subsequent patch will add struct v4l2_device as an argument to v4l2_async_nf_init(). Signed-off-by:
-
Sakari Ailus authored
Initialise the V4L2 async notifier after registering the V4L2 device, just before parsing DT for async sub-devices. This way the device can be made available to the V4L2 async framework from the notifier init time onwards. A subsequent patch will add struct v4l2_device as an argument to v4l2_async_nf_init(). Signed-off-by:
-
Sakari Ailus authored
Initialise the V4L2 async notifier after registering the V4L2 device, just before parsing DT for async sub-devices. This way the device can be made available to the V4L2 async framework from the notifier init time onwards. A subsequent patch will add struct v4l2_device as an argument to v4l2_async_nf_init(). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743 Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC Signed-off-by:
-
Sakari Ailus authored
Initialise V4L2 async notifier and parse DT for async sub-devices later, just before registering the notifier. This way the device can be made available to the V4L2 async framework from the notifier init time onwards. A subsequent patch will add struct v4l2_device as an argument to v4l2_async_nf_init(). Signed-off-by:
-
Sakari Ailus authored
Register V4L2 device before the async notifier.This way the device can be made available to the V4L2 async framework from the notifier init time onwards. A subsequent patch will add struct v4l2_device as an argument to v4l2_async_nf_init(). Signed-off-by:
-
Sakari Ailus authored
Register V4L2 device before the async notifier. This way the device can be made available to the V4L2 async framework from the notifier init time onwards. A subsequent patch will add struct v4l2_device as an argument to v4l2_async_nf_init(). Signed-off-by:
-
Sakari Ailus authored
Register V4L2 device before initialising the notifier. This way the device can be made available to the V4L2 async framework from the notifier init time onwards. A subsequent patch will add struct v4l2_device as an argument to v4l2_async_nf_init(). Signed-off-by:
-
Sakari Ailus authored
Fix and simplify error handling in pxa_camera probe, by moving devm_*() functions early in the probe function and then tearing down what was set up on error patch. Signed-off-by:
-
Sakari Ailus authored
Return the two CSI-2 transmitters of adv748x to endpoint matching. This should make the driver work again as expected. Fixes: 1029939b ("media: v4l: async: Simplify async sub-device fwnode matching") Signed-off-by:
-
- 28 Jul, 2023 22 commits
-
-
Sakari Ailus authored
Support matching V4L2 async sub-devices based on particular fwnode endpoint. This makes it possible to instantiate multiple V4L2 sub-devices based on given fwnode endpoints from a single device, based on driver needs. Signed-off-by:
-
Sakari Ailus authored
When an async sub-device is registered, it used to be that the first one of its connections were matched when found. Continue looking for matches until a notifier no longer has any. Signed-off-by:
-
Sakari Ailus authored
The list entry is initialised as a head in v4l2_async_register_subdev() just before being added to the list. This isn't needed, drop the initialisation. Signed-off-by:
-
Sakari Ailus authored
When the v4l2-async framework was introduced, the use case for it was to connect a camera sensor with a parallel receiver. Both tended to be rather simple devices with a single connection between them. The framework has been since improved in multiple ways but there are limitations that have remained, for instance the assumption an async sub-device is connected towards a single notifier and via a single link only. This patch enables connecting a sub-device to one or more notifiers simultaneously, with one or more connections per notifier. The notifier information is moved from the sub-device to the connection and the connections in sub-device are no longer a pointer but a linked list. Signed-off-by:
-
Sakari Ailus authored
Add v4l2_async_connection_unique() function for obtaining a struct v4l2_async_connection, typically allocated by drivers together with their own information on an external sub-device. The relation between connections and sub-devices still remains 1:1 but this code becomes more complex when the relation soon changes. Signed-off-by:
-
Sakari Ailus authored
This patch re-arranges internal V4L2 async lists for preparation of supporting multiple connections per sub-device as well as cleaning up used lists. The list of unbound V4L2 sub-devices shall be maintained for the purpose of listing those sub-devices only, not for their bindin status. Also, the V4L2 async connections now have, instead of two list entries, a single list entry in the notifier's list, be that either waiting or done lists, while the notifier's asc_list is removed. The one-to-one relation between a sub-device and a connection is still maintained in this patch. Signed-off-by:
-
Sakari Ailus authored
The connections are checked for duplicates already when the notifier is registered. This is effectively a sanity check for driver (and possibly obscure firmware) bugs. Don't do this when adding the connection. Retain the int return type for now. It'll be needed very soon again. Signed-off-by:
-
Sakari Ailus authored
Add labels for error handling instead of doing it all in individual cases. Prepare for more functionality in this function. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743 Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC Signed-off-by:
-
Sakari Ailus authored
Rename v4l2_async_subdev as v4l2_async_connection, in order to differentiate between the sub-devices and their connections: one sub-device can have many connections but the V4L2 async framework has so far allowed just a single one. Connections in this context will later translate into either MC ancillary or data links. This patch prepares changing that relation by changing existing users of v4l2_async_subdev to switch to v4l2_async_connection. Async sub-devices themselves will not be needed anymore Additionally, __v4l2_async_nf_add_subdev() has been renamed __v4l2_async_nf_add_connection(). Signed-off-by:
-
Sakari Ailus authored
V4L2 async sub-device matching originally used the device nodes only. Endpoint nodes were taken into use instead as using the device nodes was problematic for it was in some cases ambiguous which link might have been in question. There is however no need to use endpoint nodes on both sides, as the async sub-device's fwnode can always be trivially obtained using fwnode_graph_get_remote_endpoint() when needed while what counts is whether or not the link is between two device nodes, i.e. the device nodes match. This will briefly break the adv748x driver but it will be fixed later in the set, by patch "media: adv748x: Return to endpoint matching". Signed-off-by:
-
Sakari Ailus authored
The naming of list heads and list entries is confusing as they're named similarly. Use _list for list head and _entry for list entries. Signed-off-by:
-
Sakari Ailus authored
Pass only information required for sub-device matching to functions checking whether the async sub-device already exists. Do the same for debug message printing. This makes further changes to other aspects of async sub-devices easier. Accordingly, also perform further renames: asd_equal as v4l2_async_match_equal, v4l2_async_nf_has_async_subdev as v4l2_async_nf_has_async_match, __v4l2_async_nf_has_async_subdev as v4l2_async_nf_has_async_subdev_entry and v4l2_async_nf_asd_valid as v4l2_async_nf_match_valid. Signed-off-by:
-
Sakari Ailus authored
The async match type is a struct field now, rename V4L2_ASYNC_MATCH_* macros as V4L2_ASYNC_MATCH_TYPE_* instead. This patch has been produced by: git grep -l V4L2_ASYNC_MATCH_ -- drivers/media/ drivers/staging/media/ \ include/ Documentation/|xargs perl -i -pe \ 's/V4L2_ASYNC_MATCH_\K/TYPE_/g' so it must be correct. Signed-off-by:
-
Sakari Ailus authored
Make V4L2 async match information a struct, making it easier to use it elsewhere outside the scope of struct v4l2_async_subdev. Also remove an obsolete comment --- none of these fields are supposed to be touched by drivers. Signed-off-by:
-
Sakari Ailus authored
The callers do pass a non-NULL asd to v4l2_async_nf_asd_valid() already. There's no need for the NULL check here. Signed-off-by:
-
Sakari Ailus authored
There's a need to verify that a single async sub-device isn't being added multiple times, this would be an error. This takes place at the time of adding the async sub-device to the notifier's list as well as when the notifier is added to the global notifier's list. Use the pointer to the sub-device for testing this instead of an index to an array that is long gone. (There was an array of async sub-devices in the notifier before it was converted to a linked list by commit 66beb323 ("media: v4l2: async: Remove notifier subdevs array").) Signed-off-by:
-
Sakari Ailus authored
Just add some debug prints for V4L2 async sub-device matching process. These might come useful in figuring out why things don't work as expected. Signed-off-by:
-
Sakari Ailus authored
Document v4l2_async_nf_cleanup() which must be called before releasing an unregistered notifier's memory. Also remove the sentence regarding v4l2_async_nf_init() arguments --- those are documented in kerneldoc which is referred here. Signed-off-by:
-
Sakari Ailus authored
Also v4l2_async_nf_add_fwnode() may be used to add an async sub-device descriptor to a notifier. Document this. Also remove a redundant sentence. Signed-off-by:
-
Sakari Ailus authored
Document that the notifier of an async sub-device is, besider unregistered, also cleaned up using v4l2_async_unregister_subdev(). Signed-off-by:
-
Sakari Ailus authored
Add section titles for async documentation. While the documentation is mostly fine as-is, it has grown from its original state but remains without internal structure. Add it now. Also remove an extra newline. Signed-off-by:
-
Sakari Ailus authored
An example adding an async sub-device to a V4L2 async notifier. The name of the variable in error handling was wrong (asd vs. my_asd). Signed-off-by:
-
