- 27 Jan, 2020 40 commits
-
-
Jiada Wang authored
[ Upstream commit 2c0928c9 ] Currently IRQF_SHARED type interrupt line is allocated, but it is not appropriate, as the interrupt line isn't shared between different devices, instead IRQF_ONESHOT is the proper type. By changing interrupt type to IRQF_ONESHOT, now irq handler is no longer needed, as clear of interrupt status can be done in threaded interrupt context. Because IRQF_ONESHOT type interrupt line is kept disabled until the threaded handler has been run, so there is no need to protect read/write of REG_GEN3_IRQSTR with lock. Fixes: 7d4b2697 ("enable hardware interrupts for trip points") Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Tested-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Brian Masney authored
[ Upstream commit d3f48ec0 ] lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() both return the brightness value if the brightness was successfully updated. Writing to these attributes via sysfs would cause a 'Bad address' error to be returned. These functions should return 0 on success, so let's change it to correct that error. Fixes: 28e64a68 ("backlight: lm3630: apply chip revision") Signed-off-by:
Brian Masney <masneyb@onstation.org> Acked-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 92285a07 ] should be same as NFT_LOGLEVEL_AUDIT, so use -, not +. Fixes: 7eced5ab ("netfilter: nf_tables: add NFT_LOGLEVEL_* enumeration and use it") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit b586627e ] The "whichcpu" comes from argv[3]. The cpu_online() macro looks up the cpu in a bitmap of online cpus, but if the value is too high then it could read beyond the end of the bitmap and possibly Oops. Fixes: 5d5314d6 ("kdb: core for kgdb back end (1 of 2)") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Jiong Wang authored
[ Upstream commit 69e168eb ] NFP shift instruction has something special. If shift direction is left then shift amount of 1 to 31 is specified as 32 minus the amount to shift. But no need to do this for indirect shift which has shift amount be 0. Even after we do this subtraction, shift amount 0 will be turned into 32 which will eventually be encoded the same as 0 because only low 5 bits are encoded, but shift amount be 32 will fail the FIELD_PREP check done later on shift mask (0x1f), due to 32 is out of mask range. Such error has been observed when compiling nfp/bpf/jit.c using gcc 8.3 + O3. This issue has started when indirect shift support added after which the incoming shift amount to __emit_shf could be 0, therefore it is at that time shift amount adjustment inside __emit_shf should have been tightened. Fixes: 991f5b36 ("nfp: bpf: support logic indirect shifts (BPF_[L|R]SH | BPF_X)") Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Pablo Cascón <pablo.cascon@netronome.com Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Jiong Wang <jiong.wang@netronome.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Russell King authored
[ Upstream commit 63a0666b ] Fix lack of keyboard interrupts for RiscPC due to incorrect conversion. Fixes: e8d36d5d ("ARM: kill off set_irq_flags usage") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Bichao Zheng authored
[ Upstream commit a2793458 ] There is an abnormally low about 20ms,when setting duty repeatedly. Because setting the duty will disable PWM and then enable. Delete this operation now. Fixes: 211ed630 ("pwm: Add support for Meson PWM Controller") Signed-off-by:
Bichao Zheng <bichao.zheng@amlogic.com> [ Dropped code instead of hiding it behind a comment ] Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 51496e44 ] The pre-divider allows configuring longer PWM periods compared to using the input clock directly. The pre-divider is 7 bit wide, meaning it's maximum value is 128 (the register value is off-by-one: 0x7f or 127). Change the loop to also allow for the maximum possible value to be considered valid. Fixes: 211ed630 ("pwm: Add support for Meson PWM Controller") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
-
Florian Westphal authored
[ Upstream commit 680f6af5 ] If userspace provides a rule blob with trailing data after last target, we trigger a splat, then convert ruleset to 64bit format (with trailing data), then pass that to do_replace_finish() which then returns -EINVAL. Erroring out right away avoids the splat plus unneeded translation and error unwind. Fixes: 81e675c2 ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
Iuliana Prodan authored
[ Upstream commit 8c65d354 ] Fix caam_dump_sg by correctly determining the next scatterlist entry in the list. Fixes: 5ecf8ef9 ("crypto: caam - fix sg dump") Signed-off-by:
Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 6d1f8b3d ] The "out_data" variable is uninitialized at the point. Originally, this used to print "status" instead and that seems like the correct thing to print. Fixes: bc2ef884 ("alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status") Signed-off-by:
Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit b72845ee ] In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but the problem is that "temp_index" can be negative. This patch changes the types to unsigned to address this array underflow bug. Fixes: 66715cdc ("[media] davinci vpbe: VPBE display driver") Signed-off-by:
"Lad, Prabhakar" <prabhakar.csengg@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit dd6e2a98 ] The "b->index" is a u32 the comes from the user in the ioctl. It hasn't been checked. We aren't supposed to use it but we're instead supposed to use the value that gets written to it when we call videobuf_dqbuf(). The videobuf_dqbuf() first memsets it to zero and then re-initializes it inside the videobuf_status() function. It's this final value which we want. Hans Verkuil pointed out that we need to check the return from videobuf_dqbuf(). I ended up doing a little cleanup related to that as well. Fixes: 72915e85 ("[media] V4L2: OMAP: VOUT: dma map and unmap v4l2 buffers in qbuf and dqbuf") Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 534420c6 ] The build of aica sound driver has been broken since the timer API conversion and some code rewrite. This patch fixes the breakage by using the common substream field, as well as a bit cleaning up wrt the timer handling in the code. Fixes: d522bb6a ("ALSA: sh: aica: Convert timers to use timer_setup()") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 638a3a1e ] BUG: unable to handle kernel NULL pointer dereference at 0000000000000128 PGD 0 P4D 0 Oops: 0000 [#1 CPU: 0 PID: 5697 Comm: modprobe Tainted: G W 5.1.0-rc7+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__lock_acquire+0x53/0x10b0 Code: 8b 1c 25 40 5e 01 00 4c 8b 6d 10 45 85 e4 0f 84 bd 06 00 00 44 8b 1d 7c d2 09 02 49 89 fe 41 89 d2 45 85 db 0f 84 47 02 00 00 <48> 81 3f a0 05 70 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f 86 3a RSP: 0018:ffffc90001c07a28 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88822f038440 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000128 RBP: ffffc90001c07a88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000000 R14: 0000000000000128 R15: 0000000000000000 FS: 00007fead0811540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000128 CR3: 00000002310da000 CR4: 00000000000006f0 Call Trace: ? __lock_acquire+0x24e/0x10b0 lock_acquire+0xdf/0x230 ? flush_workqueue+0x71/0x530 flush_workqueue+0x97/0x530 ? flush_workqueue+0x71/0x530 l2tp_exit_net+0x170/0x2b0 [l2tp_core ? l2tp_exit_net+0x93/0x2b0 [l2tp_core ops_exit_list.isra.6+0x36/0x60 unregister_pernet_operations+0xb8/0x110 unregister_pernet_device+0x25/0x40 l2tp_init+0x55/0x1000 [l2tp_core ? 0xffffffffa018d000 do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fead031a839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe8d9acca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000560078398b80 RCX: 00007fead031a839 RDX: 0000000000000000 RSI: 000056007659dc2e RDI: 0000000000000003 RBP: 000056007659dc2e R08: 0000000000000000 R09: 0000560078398b80 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005600783a04a0 R14: 0000000000040000 R15: 0000560078398b80 Modules linked in: l2tp_core(+) e1000 ip_tables ipv6 [last unloaded: l2tp_core CR2: 0000000000000128 ---[ end trace 8322b2b8bf83f8e1 If alloc_workqueue fails in l2tp_init, l2tp_net_ops is unregistered on failure path. Then l2tp_exit_net is called which will flush NULL workqueue, this patch add a NULL check to fix it. Fixes: 67e04c29 ("l2tp: unregister l2tp_net_ops on failure path") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 6093e348 ] device_for_each_child() stops executing callback function for remaining child devices, if callback hits an error. Each child mdev device is independent of each other. While unregistering parent device, mdev core must remove all child mdev devices. Therefore, mdev_device_remove_cb() always returns success so that device_for_each_child doesn't abort if one child removal hits error. While at it, improve remove and unregister functions for below simplicity. There isn't need to pass forced flag pointer during mdev parent removal which invokes mdev_device_remove(). So simplify the flow. mdev_device_remove() is called from two paths. 1. mdev_unregister_driver() mdev_device_remove_cb() mdev_device_remove() 2. remove_store() mdev_device_remove() Fixes: 7b96953b ("vfio: Mediated device Core driver") Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit a6d6f4f1 ] mdev_remove_sysfs_files() should follow exact mirror sequence of a create, similar to what is followed in error unwinding path of mdev_create_sysfs_files(). Fixes: 6a62c1df ("vfio/mdev: Re-order sysfs attribute creation") Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
-
Parav Pandit authored
[ Upstream commit 60e7f2c3 ] During mdev parent registration in mdev_register_device(), if parent device is duplicate, it releases the reference of existing parent device. This is incorrect. Existing parent device should not be touched. Fixes: 7b96953b ("vfio: Mediated device Core driver") Reviewed-by:
Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by:
-
David Howells authored
[ Upstream commit c73aa410 ] Fix the ->get handlers for the afs.cell and afs.volume xattrs to pass the source data size to memcpy() rather than target buffer size. Overcopying the source data occasionally causes the kernel to oops. Fixes: d3e3b7ea ("afs: Add metadata xattrs") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Rakesh Pillai authored
[ Upstream commit 42f1bc43 ] Currently the protected management frames are not appended with the MIC_LEN which results in the protected management frames being encoded incorrectly. Add the extra space at the end of the protected management frames to fix this encoding error for the protected management frames. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: 1807da49 ("ath10k: wmi: add management tx by reference support over wmi") Signed-off-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Igor Konopko authored
[ Upstream commit 486b5aac ] In pblk_rb_tear_down_check() the spinlock functions are not called in proper order. Fixes: a4bd217b ("lightnvm: physical block device (pblk) target") Signed-off-by:
Igor Konopko <igor.j.konopko@intel.com> Reviewed-by:
Javier González <javier@javigon.com> Reviewed-by:
Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 8e1943af ] In the function mmc_alloc_host, the function put_device is called to release allocated resources when mmc_gpio_alloc fails. Finally, the function pointed by host->class_dev.class->dev_release (i.e., mmc_host_classdev_release) is used to release resources including the host structure. However, after put_device, host is used and released again. Resulting in a use-after-free bug. Fixes: 1ed21719 ("mmc: core: fix error path in mmc_host_alloc") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 8dd29f19 ] The driver registers the watchdog with devm_watchdog_register_device() but still calls watchdog_unregister_device() on remove. Since clocks have to be stopped when removing the driver, after the watchdog device has been unregistered, we can not drop the call to watchdog_unregister_device(). Use watchdog_register_device() to register the watchdog. Fixes: 2bdf6acb ("watchdog: Add Realtek RTD1295") Cc: Andreas Färber <afaerber@suse.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Sameer Pujar authored
[ Upstream commit f33e7bb3 ] Status of ADMA channel registers is not saved and restored during system suspend. During active playback if system enters suspend, this results in wrong state of channel registers during system resume and playback fails to resume properly. Fix this by saving following channel registers in runtime suspend and restore during runtime resume. * ADMA_CH_LOWER_SRC_ADDR * ADMA_CH_LOWER_TRG_ADDR * ADMA_CH_FIFO_CTRL * ADMA_CH_CONFIG * ADMA_CH_CTRL * ADMA_CH_CMD * ADMA_CH_TC Runtime PM calls will be inovked during system resume path if a playback or capture needs to be resumed. Hence above changes work fine for system suspend case. Fixes: f46b1957 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA") Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Reviewed-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Sameeh Jubran authored
[ Upstream commit 11bd7a00 ] ena_com_fill_hash_function() didn't configure the rss->hash_func. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Netanel Belgazal <netanel@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
-
Sameeh Jubran authored
[ Upstream commit d3cfe7dd ] ena_com_set_hash_function() tests if a hash function is supported by the device before setting it. The test returns the opposite result than needed. Reverse the condition to return the correct value. Also use the BIT macro instead of inline shift. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Sameeh Jubran authored
[ Upstream commit b287cdbd ] ena_up() calls ena_init_napi() but does not call ena_del_napi() in case of failure. This causes a segmentation fault upon rmmod when netif_napi_del() is called. Fix this bug by calling ena_del_napi() before returning error from ena_up(). Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
-
Sameeh Jubran authored
[ Upstream commit 3c6eeff2 ] second parameter should be the index of the table rather than the value. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Saeed Bshara <saeedb@amazon.com> Signed-off-by:
-
Lu Baolu authored
[ Upstream commit 5daab580 ] The kernel parameter igfx_off is used by users to disable DMA remapping for the Intel integrated graphic device. It was designed for bare metal cases where a dedicated IOMMU is used for graphic. This doesn't apply to virtual IOMMU case where an include-all IOMMU is used. This makes the kernel parameter work with virtual IOMMU as well. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Suggested-by:
Kevin Tian <kevin.tian@intel.com> Fixes: c0771df8 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Tested-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 3bf3e2b8 ] Always consider the skb reserve space based on netdevice of the GID attribute, regardless of vlan or non vlan netdevice. Fixes: 43c9fc50 ("rdma_rxe: make rxe work over 802.1q VLAN devices") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 8f4426aa ] The QP transition optional parameters for the various transition for XRC QPs are identical to those for RC QPs. Many of the XRC QP transition optional parameter bits are missing from the QP optional mask table. These omissions caused failures when doing XRC QP state transitions. For example, when trying to change the response timer of an XRC receive QP via the RTS2RTS transition, the new timer value was ignored because MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask for XRC qps for the RTS2RTS transition. Fix this by adding the missing XRC optional parameters for all QP transitions to the opt_mask table. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Fixes: a4774e90 ("IB/mlx5: Fix opt param mask according to firmware spec") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Minas Harutyunyan authored
[ Upstream commit 5acb4b97 ] Fix calculation of transfer size on completion in function dwc2_gadget_get_xfersize_ddma(). Added increment of descriptor pointer to move to next descriptor in the loop. Fixes: aa3e8bc8 ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 2100e3ca ] The dependency to ensure this driver links correctly fails since it can not be a loadable module: drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_set_peripheral': phy-fsl-usb.c:(.text+0x2224): undefined reference to `usb_gadget_vbus_disconnect' Make the option 'tristate' so it can work correctly. Fixes: 5a8d651a ("usb: gadget: move gadget API functions to udc-core") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit 6a7c59c6 ] A stream may specify a rate range using 'rate_min' and 'rate_max', so a stream may be valid and not specify any rates. However, as stream cannot be valid and not have any channel. Let's use this condition instead to determine if a stream is valid or not. Fixes: cde79035 ("ASoC: Handle multiple codecs with split playback / capture") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit b2cf86e1 ] Packet send checks that msg_name is at least sizeof sockaddr_ll. Packet recv must return at least this length, so that its output can be passed unmodified to packet send. This ceased to be true since adding support for lladdr longer than sll_addr. Since, the return value uses true address length. Always return at least sizeof sockaddr_ll, even if address length is shorter. Zero the padding bytes. Change v1->v2: do not overwrite zeroed padding again. use copy_len. Fixes: 0fb375fb ("[AF_PACKET]: Allow for > 8 byte hardware addresses.") Suggested-by:
David Laight <David.Laight@aculab.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Adam Ford authored
[ Upstream commit 6a38df67 ] The card detect pin was incorrectly using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW when reading the state of the CD pin. This was previosly fixed on Torpedo, but missed on the SOM-LV Fixes: 5cb8b0fa ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi") Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Srinath Mannam authored
[ Upstream commit 8cff9954 ] iProc config read flag has to be enabled for PAXBv2 instead of PAXB. Fixes: f78e60a2 ("PCI: iproc: Reject unconfigured physical functions from PAXC") Signed-off-by:
Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 270a8a29 ] This is fixing flow offload for UDP traffic where packets only follow one single direction. The flow_offload_fixup_tcp() mechanism works fine in case that the offloaded entry remains in SYN_RECV state, given sequence tracking is reset and that conntrack handles syn+ack packets as a retransmission, ie. sES + synack => sIG for reply traffic. Fixes: a3c90f7a ("netfilter: nf_tables: flow offload expression") Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit 3309bec8 ] The trace_hardirqs_on() sets current->hardirqs_enabled and from here the lockdep assumes interrupts are enabled although they are remain disabled until the context switches to the guest. Consequent srcu_read_lock() checks the flags in rcu_lock_acquire(), observes disabled interrupts and prints a warning (see below). This moves trace_hardirqs_on/off closer to __kvmppc_vcore_entry to prevent lockdep from being confused. DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) WARNING: CPU: 16 PID: 8038 at kernel/locking/lockdep.c:4128 check_flags.part.25+0x224/0x280 [...] NIP [c000000000185b84] check_flags.part.25+0x224/0x280 LR [c000000000185b80] check_flags.part.25+0x220/0x280 Call Trace: [c000003fec253710] [c000000000185b80] check_flags.part.25+0x220/0x280 (unreliable) [c000003fec253780] [c000000000187ea4] lock_acquire+0x94/0x260 [c000003fec253840] [c00800001a1e9768] kvmppc_run_core+0xa60/0x1ab0 [kvm_hv] [c000003fec253a10] [c00800001a1ed944] kvmppc_vcpu_run_hv+0x73c/0xec0 [kvm_hv] [c000003fec253ae0] [c00800001a1095dc] kvmppc_vcpu_run+0x34/0x48 [kvm] [c000003fec253b00] [c00800001a1056bc] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm] [c000003fec253b90] [c00800001a0f3618] kvm_vcpu_ioctl+0x460/0x850 [kvm] [c000003fec253d00] [c00000000041c4f4] do_vfs_ioctl+0xe4/0x930 [c000003fec253db0] [c00000000041ce04] ksys_ioctl+0xc4/0x110 [c000003fec253e00] [c00000000041ce78] sys_ioctl+0x28/0x80 [c000003fec253e20] [c00000000000b5a4] system_call+0x5c/0x70 Instruction dump: 419e0034 3d220004 39291730 81290000 2f890000 409e0020 3c82ffc6 3c62ffc5 3884be70 386329c0 4bf6ea71 60000000 <0fe00000> 3c62ffc6 3863be90 4801273d irq event stamp: 1025 hardirqs last enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv] hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv] softirqs last enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00 softirqs last disabled at (0): [<0000000000000000>] (null) ---[ end trace 31180adcc848993e ]--- possible reason: unannotated irqs-off. irq event stamp: 1025 hardirqs last enabled at (1025): [<c00800001a1e9728>] kvmppc_run_core+0xa20/0x1ab0 [kvm_hv] hardirqs last disabled at (1024): [<c00800001a1e9358>] kvmppc_run_core+0x650/0x1ab0 [kvm_hv] softirqs last enabled at (0): [<c0000000000f1210>] copy_process.isra.4.part.5+0x5f0/0x1d00 softirqs last disabled at (0): [<0000000000000000>] (null) Fixes: 8b24e69f ("KVM: PPC: Book3S HV: Close race with testing for signals on guest entry", 2017-06-26) Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit a861b492 ] The "(&ctio->u.status1.sense_data)[i]" where i >= 0 expressions in qlt_send_resp_ctio() are probably typos and should have been "(&ctio->u.status1.sense_data[4 * i])" instead. Instead of only fixing these typos, modify the code for storing sense data such that it becomes easy to read. This patch fixes a Coverity complaint about accessing an array outside its bounds. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: be25152c ("qla2xxx: Improve T10-DIF/PI handling in driver.") # v4.11. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
