- 13 Mar, 2018 40 commits
-
-
hayeswang authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 5ee3c60c upstream. When the autosuspend is enabled and occurs before system suspend, we should wake the device before running system syspend. Then, we could change the wake event for system suspend. Otherwise, the device would resume the system when receiving any packet. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Ulf Hansson authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 79c5623f upstream. The commit 7d32cdef ("usb: musb: fail with error when no DMA controller set"), caused the core platform driver to correctly return an error code when fail probing. Unfurtante it also caused bug for a NULL pointer dereference, during system suspend for the ux500 driver. The reason is a lacking validation of the corresponding ->driver_data pointer, which won't be set when the musb core driver fails to probe (or haven't yet been probed). Fixes: 7d32cdef ("usb: musb: fail with error when no DMA...") Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Oliver Neukum authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 588afcc1 upstream. This fixes the crash reported in: http://seclists.org/bugtraq/2015/Oct/35 The interface number needs a sanity check. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Davidlohr Bueso authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 1329ce6f upstream. Make use of wake-queues and enable the wakeup to occur after releasing the wait_lock. This is similar to what we do with rtmutex top waiter, slightly shortening the critical region and allow other waiters to acquire the wait_lock sooner. In low contention cases it can also help the recently woken waiter to find the wait_lock available (fastpath) when it continues execution. Reviewed-by:
Waiman Long <Waiman.Long@hpe.com> Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: Jason Low <jason.low2@hp.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Waiman Long <waiman.long@hpe.com> Cc: Will Deacon <Will.Deacon@arm.com> Link: http://lkml.kernel.org/r/20160125022343.GA3322@linux-uzut.siteSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jianyu Zhan authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 29b75eb2 upstream. Commit e91467ec ("bug in futex unqueue_me") introduced a barrier() in unqueue_me() to prevent the compiler from rereading the lock pointer which might change after a check for NULL. Replace the barrier() with a READ_ONCE() for the following reasons: 1) READ_ONCE() is a weaker form of barrier() that affects only the specific load operation, while barrier() is a general compiler level memory barrier. READ_ONCE() was not available at the time when the barrier was added. 2) Aside of that READ_ONCE() is descriptive and self explainatory while a barrier without comment is not clear to the casual reader. No functional change. [ tglx: Massaged changelog ] Signed-off-by:
Jianyu Zhan <nasa4836@gmail.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Darren Hart <dvhart@linux.intel.com> Cc: dave@stgolabs.net Cc: peterz@infradead.org Cc: linux@rasmusvillemoes.dk Cc: akpm@linux-foundation.org Cc: fengguang.wu@intel.com Cc: bigeasy@linutronix.de Link: http://lkml.kernel.org/r/1457314344-5685-1-git-send-email-nasa4836@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Jeff Layton authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 0752ba80 upstream. We don't clean out OFD locks on close(), so there's no need to check for a race with them here. They'll get cleaned out at the same time that flock locks are. Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Dan Streetman authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit fd5bb66c upstream. Change the zpool/compressor param callback function to release the zswap_pools_lock spinlock before calling param_set_charp, since that function may sleep when it calls kmalloc with GFP_KERNEL. While this problem has existed for a while, I wasn't able to trigger it using a tight loop changing either/both the zpool and compressor params; I think it's very unlikely to be an issue on the stable kernels, especially since most zswap users will change the compressor and/or zpool from sysfs only one time each boot - or zero times, if they add the params to the kernel boot. Fixes: c99b42c3 ("zswap: use charp for zswap param strings") Link: http://lkml.kernel.org/r/20170126155821.4545-1-ddstreet@ieee.orgSigned-off-by:
Dan Streetman <dan.streetman@canonical.com> Reported-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Dan Streetman authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 200867af upstream. Add a work_struct to struct zswap_pool, and change __zswap_pool_empty to use the workqueue instead of using call_rcu(). When zswap destroys a pool no longer in use, it uses call_rcu() to perform the destruction/freeing. Since that executes in softirq context, it must not sleep. However, actually destroying the pool involves freeing the per-cpu compressors (which requires locking the cpu_add_remove_lock mutex) and freeing the zpool, for which the implementation may sleep (e.g. zsmalloc calls kmem_cache_destroy, which locks the slab_mutex). So if either mutex is currently taken, or any other part of the compressor or zpool implementation sleeps, it will result in a BUG(). It's not easy to reproduce this when changing zswap's params normally. In testing with a loaded system, this does not fail: $ cd /sys/module/zswap/parameters $ echo lz4 > compressor ; echo zsmalloc > zpool nor does this: $ while true ; do > echo lzo > compressor ; echo zbud > zpool > sleep 1 > echo lz4 > compressor ; echo zsmalloc > zpool > sleep 1 > done although it's still possible either of those might fail, depending on whether anything else besides zswap has locked the mutexes. However, changing a parameter with no delay immediately causes the schedule while atomic BUG: $ while true ; do > echo lzo > compressor ; echo lz4 > compressor > done This is essentially the same as Yu Zhao's proposed patch to zsmalloc, but moved to zswap, to cover compressor and zpool freeing. Fixes: f1c54846 ("zswap: dynamic pool creation") Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Reported-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
-
Andrey Ryabinin authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit d59b1087 upstream. Calculation of dirty_ratelimit sometimes is not correct. E.g. initial values of dirty_ratelimit == INIT_BW and step == 0, lead to the following result: UBSAN: Undefined behaviour in ../mm/page-writeback.c:1286:7 shift exponent 25600 is too large for 64-bit type 'long unsigned int' The fix is straightforward - make step 0 if the shift exponent is too big. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Joonsoo Kim authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit e1409c32 upstream. pageblock_pfn_to_page() is used to check there is valid pfn and all pages in the pageblock is in a single zone. If there is a hole in the pageblock, passing arbitrary position to pageblock_pfn_to_page() could cause to skip whole pageblock scanning, instead of just skipping the hole page. For deterministic behaviour, it's better to always pass pageblock aligned range to pageblock_pfn_to_page(). It will also help further optimization on pageblock_pfn_to_page() in the following patch. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Acked-by:
-
Joonsoo Kim authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 623446e4 upstream. free_pfn and compact_cached_free_pfn are the pointer that remember restart position of freepage scanner. When they are reset or invalid, we set them to zone_end_pfn because freepage scanner works in reverse direction. But, because zone range is defined as [zone_start_pfn, zone_end_pfn), zone_end_pfn is invalid to access. Therefore, we should not store it to free_pfn and compact_cached_free_pfn. Instead, we need to store zone_end_pfn - 1 to them. There is one more thing we should consider. Freepage scanner scan reversely by pageblock unit. If free_pfn and compact_cached_free_pfn are set to middle of pageblock, it regards that sitiation as that it already scans front part of pageblock so we lose opportunity to scan there. To fix-up, this patch do round_down() to guarantee that reset position will be pageblock aligned. Note that thanks to the current pageblock_pfn_to_page() implementation, actual access to zone_end_pfn doesn't happen until now. But, following patch will change pageblock_pfn_to_page() so this patch is needed from now on. Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Vikas C Sajjan authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 4ee2ec1b upstream. The new function mp_register_ioapic_irq() is a subset of the code in mp_override_legacy_irq(). Replace the code duplication by invoking mp_register_ioapic_irq() from mp_override_legacy_irq(). Signed-off-by:
Vikas C Sajjan <vikas.cha.sajjan@hpe.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Cc: kkamagui@gmail.com Cc: linux-acpi@vger.kernel.org Link: https://lkml.kernel.org/r/1510848825-21965-3-git-send-email-vikas.cha.sajjan@hpe.com Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 898dfe46 upstream. The aloop driver tries to update the hw constraints of the connected target on the cable of the opened PCM substream. This is done by adding the extra hw constraints rules referring to the substream runtime->hw fields, while the other substream may update the runtime hw of another side on the fly. This is, however, racy and may result in the inconsistent values when both PCM streams perform the prepare concurrently. One of the reason is that it overwrites the other's runtime->hw field; which is not only racy but also broken when it's called before the open of another side finishes. And, since the reference to runtime->hw isn't protected, the concurrent write may give the partial value update and become inconsistent. This patch is an attempt to fix and clean up: - The prepare doesn't change the runtime->hw of other side any longer, but only update the cable->hw that is referred commonly. - The extra rules refer to the loopback_pcm object instead of the runtime->hw. The actual hw is deduced from cable->hw. - The extra rules take the cable_lock to protect against the race. Fixes: b1c73fc8 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit b088b53e upstream. The extra hw constraint rule for the formats the aloop driver introduced has a slight flaw, where it doesn't return a positive value when the mask got changed. It came from the fact that it's basically a copy&paste from snd_hw_constraint_mask64(). The original code is supposed to be a single-shot and it modifies the mask bits only once and never after, while what we need for aloop is the dynamic hw rule that limits the mask bits. This difference results in the inconsistent state, as the hw_refine doesn't apply the dependencies fully. The worse and surprisingly result is that it causes a crash in OSS emulation when multiple full-duplex reads/writes are performed concurrently (I leave why it triggers Oops to readers as a homework). For fixing this, replace a few open-codes with the standard snd_mask_*() macros. Reported-by: syzbot+3902b5220e8ca27889ca@syzkaller.appspotmail.com Fixes: b1c73fc8 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 9685347a upstream. The aloop runtime object and its assignment in the cable are left even when opening a substream fails. This doesn't mean any memory leak, but it still keeps the invalid pointer that may be referred by the another side of the cable spontaneously, which is a potential Oops cause. Clean up the cable assignment and the empty cable upon the error path properly. Fixes: 597603d6 ("ALSA: introduce the snd-aloop module for the PCM loopback") Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 900498a3 upstream. PCM OSS read/write loops keep taking the mutex lock for the whole read/write, and this might take very long when the exceptionally high amount of data is given. Also, since it invokes with mutex_lock(), the concurrent read/write becomes unbreakable. This patch tries to address these issues by replacing mutex_lock() with mutex_lock_interruptible(), and also splits / re-takes the lock at each read/write period chunk, so that it can switch the context more finely if requested. Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 29159a4e upstream. The loops for read and write in PCM OSS emulation have no proper check of pending signals, and they keep processing even after user tries to break. This results in a very long delay, often seen as RCU stall when a huge unprocessed bytes remain queued. The bug could be easily triggered by syzkaller. As a simple workaround, this patch adds the proper check of pending signals and aborts the loop appropriately. Reported-by: syzbot+993cb4cfcbbff3947c21@syzkaller.appspotmail.com Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 67089137 upstream. In the OSS emulation plugin builder where the frame size is parsed in the plugin chain, some places miss the possible errors returned from the plugin src_ or dst_frames callback. This patch papers over such places. Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit fe08f34d upstream. syzkaller triggered kernel warnings through PCM OSS emulation at closing a stream: WARNING: CPU: 0 PID: 3502 at sound/core/pcm_lib.c:1635 snd_pcm_hw_param_first+0x289/0x690 sound/core/pcm_lib.c:1635 Call Trace: .... snd_pcm_hw_param_near.constprop.27+0x78d/0x9a0 sound/core/oss/pcm_oss.c:457 snd_pcm_oss_change_params+0x17d3/0x3720 sound/core/oss/pcm_oss.c:969 snd_pcm_oss_make_ready+0xaa/0x130 sound/core/oss/pcm_oss.c:1128 snd_pcm_oss_sync+0x257/0x830 sound/core/oss/pcm_oss.c:1638 snd_pcm_oss_release+0x20b/0x280 sound/core/oss/pcm_oss.c:2431 __fput+0x327/0x7e0 fs/file_table.c:210 .... This happens while it tries to open and set up the aloop device concurrently. The warning above (invoked from snd_BUG_ON() macro) is to detect the unexpected logical error where snd_pcm_hw_refine() call shouldn't fail. The theory is true for the case where the hw_params config rules are static. But for an aloop device, the hw_params rule condition does vary dynamically depending on the connected target; when another device is opened and changes the parameters, the device connected in another side is also affected, and it caused the error from snd_pcm_hw_refine(). That is, the simplest "solution" for this is to remove the incorrect assumption of static rules, and treat such an error as a normal error path. As there are a couple of other places using snd_BUG_ON() incorrectly, this patch removes these spurious snd_BUG_ON() calls. Reported-by: syzbot+6f11c7e2a1b91d466432@syzkaller.appspotmail.com Signed-off-by:
-
Jean-Philippe Brucker authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 57d72e15 upstream. Kasan reports a double free when finalise_stage_fn fails: the io_pgtable ops are freed by arm_smmu_domain_finalise and then again by arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure. Fixes: 48ec83bc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Vikas C Sajjan authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 25271415 upstream. Platforms which support only IOAPIC mode, pass the SCI information above the legacy space (0-15) via the FADT mechanism and not via MADT. In such cases mp_override_legacy_irq() which is invoked from acpi_sci_ioapic_setup() to register SCI interrupts fails for interrupts greater equal 16, since it is meant to handle only the legacy space and emits error "Invalid bus_irq %u for legacy override". Add a new function to handle SCI interrupts >= 16 and invoke it conditionally in acpi_sci_ioapic_setup(). The code duplication due to this new function will be cleaned up in a separate patch. Co-developed-by:
Sunil V L <sunil.vl@hpe.com> Signed-off-by:
Abdul Lateef Attar <abdul-lateef.attar@hpe.com> Acked-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 8705d603 upstream. arch/x86/built-in.o: In function `arch_setup_additional_pages': (.text+0x587): undefined reference to `pvclock_pvti_cpu0_va' KVM_GUEST selects PARAVIRT_CLOCK, so we can make pvclock_pvti_cpu0_va depend on KVM_GUEST. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Tested-by:
Borislav Petkov <bp@alien8.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/444d38a9bcba832685740ea1401b569861d09a72.1451446564.git.luto@kernel.orgSigned-off-by:
-
Andrey Ryabinin authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 68920c97 upstream. With upcoming CONFIG_UBSAN the following BUILD_BUG_ON in net/mac80211/debugfs.c starts to trigger: BUILD_BUG_ON(hw_flag_names[NUM_IEEE80211_HW_FLAGS] != (void *)0x1); It seems, that compiler instrumentation causes some code deoptimizations. Because of that GCC is not being able to resolve condition in BUILD_BUG_ON() at compile time. We could make size of hw_flag_names array unspecified and replace the condition in BUILD_BUG_ON() with following: ARRAY_SIZE(hw_flag_names) != NUM_IEEE80211_HW_FLAGS That will have the same effect as before (adding new flag without updating array will trigger build failure) except it doesn't fail with CONFIG_UBSAN. As a bonus this patch slightly decreases size of hw_flag_names array. Signed-off-by:
Daniel Wagner <daniel.wagner@siemens.com> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit c8c5a3a2 upstream. Complement commit c23b3d1a ("MIPS: ptrace: Change GP regset to use correct core dump register layout") and also reject outsized PTRACE_SETREGSET requests to the NT_PRFPREG regset, like with the NT_PRSTATUS regset. Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Fixes: c23b3d1a ("MIPS: ptrace: Change GP regset to use correct core dump register layout") Cc: James Hogan <james.hogan@mips.com> Cc: Paul Burton <Paul.Burton@mips.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Dave Martin <Dave.Martin@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17930/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 006501e0 upstream. Complement commit d614fd58 ("mips/ptrace: Preserve previous registers for short regset write") and like with the PTRACE_GETREGSET ptrace(2) request also apply a BUILD_BUG_ON check for the size of the `elf_fpreg_t' type in the PTRACE_SETREGSET request handler. Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit be07a6a1 upstream. Fix a commit 72b22bba ("MIPS: Don't assume 64-bit FP registers for FP regset") public API regression, then activated by commit 1db1af84 ("MIPS: Basic MSA context switching support"), that caused the FCSR register not to be read or written for CONFIG_CPU_HAS_MSA kernel configurations (regardless of actual presence or absence of the MSA feature in a given processor) with ptrace(2) PTRACE_GETREGSET and PTRACE_SETREGSET requests nor recorded in core dumps. This is because with !CONFIG_CPU_HAS_MSA configurations the whole of `elf_fpregset_t' array is bulk-copied as it is, which includes the FCSR in one half of the last, 33rd slot, whereas with CONFIG_CPU_HAS_MSA configurations array elements are copied individually, and then only the leading 32 FGR slots while the remaining slot is ignored. Correct the code then such that only FGR slots are copied in the respective !MSA and MSA helpers an then the FCSR slot is handled separately in common code. Use `ptrace_setfcr31' to update the FCSR too, so that the read-only mask is respected. Retrieving a correct value of FCSR is important in debugging not only for the human to be able to get the right interpretation of the situation, but for correct operation of GDB as well. This is because the condition code bits in FSCR are used by GDB to determine the location to place a breakpoint at when single-stepping through an FPU branch instruction. If such a breakpoint is placed incorrectly (i.e. with the condition reversed), then it will be missed, likely causing the debuggee to run away from the control of GDB and consequently breaking the process of investigation. Fortunately GDB continues using the older PTRACE_GETFPREGS ptrace(2) request which is unaffected, so the regression only really hits with post-mortem debug sessions using a core dump file, in which case execution, and consequently single-stepping through branches is not possible. Of course core files created by buggy kernels out there will have the value of FCSR recorded clobbered, but such core files cannot be corrected and the person using them simply will have to be aware that the value of FCSR retrieved is not reliable. Which also means we can likely get away without defining a replacement API which would ensure a correct value of FSCR to be retrieved, or none at all. This is based on previous work by Alex Smith, extensively rewritten. Signed-off-by:
Alex Smith <alex@alex-smith.me.uk> Signed-off-by:
James Hogan <james.hogan@mips.com> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 80b3ffce upstream. Update commit d614fd58 ("mips/ptrace: Preserve previous registers for short regset write") bug and consistently consume all data supplied to `fpr_set_msa' with the ptrace(2) PTRACE_SETREGSET request, such that a zero data buffer counter is returned where insufficient data has been given to fill a whole number of FP general registers. In reality this is not going to happen, as the caller is supposed to only supply data covering a whole number of registers and it is verified in `ptrace_regset' and again asserted in `fpr_set', however structuring code such that the presence of trailing partial FP general register data causes `fpr_set_msa' to return with a non-zero data buffer counter makes it appear that this trailing data will be used if there are subsequent writes made to FP registers, which is going to be the case with the FCSR once the missing write to that register has been fixed. Fixes: d614fd58 ("mips/ptrace: Preserve previous registers for short regset write") Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit dc24d0ed upstream. Complement commit d614fd58 ("mips/ptrace: Preserve previous registers for short regset write") and ensure that no partial register write attempt is made with PTRACE_SETREGSET, as we do not preinitialize any temporaries used to hold incoming register data and consequently random data could be written. It is the responsibility of the caller, such as `ptrace_regset', to arrange for writes to span whole registers only, so here we only assert that it has indeed happened. Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit a03fe725 upstream. In preparation to fix a commit 72b22bba ("MIPS: Don't assume 64-bit FP registers for FP regset") FCSR access regression factor out NT_PRFPREG regset access helpers for the non-MSA and the MSA variants respectively, to avoid having to deal with excessive indentation in the actual fix. No functional change, however use `target->thread.fpu.fpr[0]' rather than `target->thread.fpu.fpr[i]' for FGR holding type size determination as there's no `i' variable to refer to anymore, and for the factored out `i' variable declaration use `unsigned int' rather than `unsigned' as its type, following the common style. Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit b67336ee upstream. Fix an API loophole introduced with commit 9791554b ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS"), where the caller of prctl(2) is incorrectly allowed to make a change to CP0.Status.FR or CP0.Config5.FRE register bits even if CONFIG_MIPS_O32_FP64_SUPPORT has not been enabled, despite that an executable requesting the mode requested via ELF file annotation would not be allowed to run in the first place, or for n64 and n64 ABI tasks which do not have non-default modes defined at all. Add suitable checks to `mips_set_process_fp_mode' and bail out if an invalid mode change has been requested for the ABI in effect, even if the FPU hardware or emulation would otherwise allow it. Always succeed however without taking any further action if the mode requested is the same as one already in effect, regardless of whether any mode change, should it be requested, would actually be allowed for the task concerned. Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: James Hogan <james.hogan@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17800/Signed-off-by:
-
Bart Van Assche authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit bec40c26 upstream. With the SRP protocol all RDMA operations are initiated by the target. Since no RDMA operations are initiated by the initiator, do not grant the initiator permission to submit RDMA reads or writes to the target. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Wolfgang Grandegger authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit d5b42e66 upstream. The "set_bittiming" callback treats a positive return value as error! For that reason "can_changelink()" will quit silently after setting the bittiming values without processing ctrlmode, restart-ms, etc. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Suren Baghdasaryan authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit fbc7c07e upstream. When system is under memory pressure it is observed that dm bufio shrinker often reclaims only one buffer per scan. This change fixes the following two issues in dm bufio shrinker that cause this behavior: 1. ((nr_to_scan - freed) <= retain_target) condition is used to terminate slab scan process. This assumes that nr_to_scan is equal to the LRU size, which might not be correct because do_shrink_slab() in vmscan.c calculates nr_to_scan using multiple inputs. As a result when nr_to_scan is less than retain_target (64) the scan will terminate after the first iteration, effectively reclaiming one buffer per scan and making scans very inefficient. This hurts vmscan performance especially because mutex is acquired/released every time dm_bufio_shrink_scan() is called. New implementation uses ((LRU size - freed) <= retain_target) condition for scan termination. LRU size can be safely determined inside __scan() because this function is called after dm_bufio_lock(). 2. do_shrink_slab() uses value returned by dm_bufio_shrink_count() to determine number of freeable objects in the slab. However dm_bufio always retains retain_target buffers in its LRU and will terminate a scan when this mark is reached. Therefore returning the entire LRU size from dm_bufio_shrink_count() is misleading because that does not represent the number of freeable objects that slab will reclaim during a scan. Returning (LRU size - retain_target) better represents the number of freeable objects in the slab. This way do_shrink_slab() returns 0 when (LRU size < retain_target) and vmscan will not try to scan this shrinker avoiding scans that will not reclaim any memory. Test: tested using Android device running <AOSP>/system/extras/alloc-stress that generates memory pressure and causes intensive shrinker scans Signed-off-by:
Suren Baghdasaryan <surenb@google.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1745263Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1745263 This fixes the following much-reported build issue: arch/x86/entry/vdso/vma.c: In function ‘map_vdso’: arch/x86/entry/vdso/vma.c:175:9: error: implicit declaration of function ‘pvclock_pvti_cpu0_va’ on some arches and configurations. Thanks to Guenter for being persistent enough to get it fixed :) Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Alexey Dobriyan authored
BugLink: http://bugs.launchpad.net/bugs/1745263 commit 68ba0326 upstream. Every current KDE system has process named ksysguardd polling files below once in several seconds: $ strace -e trace=open -p $(pidof ksysguardd) Process 1812 attached open("/etc/mtab", O_RDONLY|O_CLOEXEC) = 8 open("/etc/mtab", O_RDONLY|O_CLOEXEC) = 8 open("/proc/net/dev", O_RDONLY) = 8 open("/proc/net/wireless", O_RDONLY) = -1 ENOENT (No such file or directory) open("/proc/stat", O_RDONLY) = 8 open("/proc/vmstat", O_RDONLY) = 8 Hell knows what it is doing but speed up reading /proc/vmstat by 33%! Benchmark is open+read+close 1.000.000 times. BEFORE $ perf stat -r 10 taskset -c 3 ./proc-vmstat Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs): 13146.768464 task-clock (msec) # 0.960 CPUs utilized ( +- 0.60% ) 15 context-switches # 0.001 K/sec ( +- 1.41% ) 1 cpu-migrations # 0.000 K/sec ( +- 11.11% ) 104 page-faults # 0.008 K/sec ( +- 0.57% ) 45,489,799,349 cycles # 3.460 GHz ( +- 0.03% ) 9,970,175,743 stalled-cycles-frontend # 21.92% frontend cycles idle ( +- 0.10% ) 2,800,298,015 stalled-cycles-backend # 6.16% backend cycles idle ( +- 0.32% ) 79,241,190,850 instructions # 1.74 insn per cycle # 0.13 stalled cycles per insn ( +- 0.00% ) 17,616,096,146 branches # 1339.956 M/sec ( +- 0.00% ) 176,106,232 branch-misses # 1.00% of all branches ( +- 0.18% ) 13.691078109 seconds time elapsed ( +- 0.03% ) ^^^^^^^^^^^^ AFTER $ perf stat -r 10 taskset -c 3 ./proc-vmstat Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs): 8688.353749 task-clock (msec) # 0.950 CPUs utilized ( +- 1.25% ) 10 context-switches # 0.001 K/sec ( +- 2.13% ) 1 cpu-migrations # 0.000 K/sec 104 page-faults # 0.012 K/sec ( +- 0.56% ) 30,384,010,730 cycles # 3.497 GHz ( +- 0.07% ) 12,296,259,407 stalled-cycles-frontend # 40.47% frontend cycles idle ( +- 0.13% ) 3,370,668,651 stalled-cycles-backend # 11.09% backend cycles idle ( +- 0.69% ) 28,969,052,879 instructions # 0.95 insn per cycle # 0.42 stalled cycles per insn ( +- 0.01% ) 6,308,245,891 branches # 726.058 M/sec ( +- 0.00% ) 214,685,502 branch-misses # 3.40% of all branches ( +- 0.26% ) 9.146081052 seconds time elapsed ( +- 0.07% ) ^^^^^^^^^^^ vsnprintf() is slow because: 1. format_decode() is busy looking for format specifier: 2 branches per character (not in this case, but in others) 2. approximately million branches while parsing format mini language and everywhere 3. just look at what string() does /proc/vmstat is good case because most of its content are strings Link: http://lkml.kernel.org/r/20160806125455.GA1187@p183.telecom.bySigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Libor Pechacek authored
BugLink: http://bugs.launchpad.net/bugs/1745263 commit 3205c36c upstream. While most of the locations where a kernel taint bit is set are accompanied with a warning message, there are two which set their bits silently. If the tainting module gets unloaded later on, it is almost impossible to tell what was the reason for setting the flag. Signed-off-by:
Libor Pechacek <lpechacek@suse.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Michal Marek authored
BugLink: http://bugs.launchpad.net/bugs/1745263 commit a78f70e8 upstream. The reference files use spaces to separate tokens, however, we must preserve spaces inside string literals. Currently the only case in the tree is struct edac_raw_error_desc in <linux/edac.h>: $ KBUILD_SYMTYPES=1 make -s drivers/edac/amd64_edac.symtypes $ mv drivers/edac/amd64_edac.{symtypes,symref} $ KBUILD_SYMTYPES=1 make -s drivers/edac/amd64_edac.symtypes drivers/edac/amd64_edac.c:527: warning: amd64_get_dram_hole_info: modversion changed because of changes in struct edac_raw_error_desc Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Helge Deller authored
BugLink: http://bugs.launchpad.net/bugs/1745263 commit 88776c0e upstream. Qemu for PARISC reported on a 32bit SMP parisc kernel strange failures about "Not-handled unaligned insn 0x0e8011d6 and 0x0c2011c9." Those opcodes evaluate to the ldcw() assembly instruction which requires (on 32bit) an alignment of 16 bytes to ensure atomicity. As it turns out, qemu is correct and in our assembly code in entry.S and pacache.S we don't pay attention to the required alignment. This patch fixes the problem by aligning the lock offset in assembly code in the same manner as we do in our C-code. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Vineet Gupta authored
BugLink: http://bugs.launchpad.net/bugs/1745263 commit 79435ac7 upstream. This used to setup the LP_COUNT register automatically, but now has been removed. There was an earlier fix 3c7c7a2f which fixed instance in delay.h but somehow missed this one as gcc change had not made its way into production toolchains and was not pedantic as it is now ! Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
