- 26 Mar, 2015 40 commits
-
-
Julian Anastasov authored
commit 528c943f upstream. ip_vs_conn_fill_param_sync() gets in param.pe a module reference for persistence engine from __ip_vs_pe_getbyname() but forgets to put it. Problem occurs in backup for sync protocol v1 (2.6.39). Also, pe_data usually comes in sync messages for connection templates and ip_vs_conn_new() copies the pointer only in this case. Make sure pe_data is not leaked if it comes unexpectedly for normal connections. Leak can happen only if bogus messages are sent to backup server. Fixes: fe5e7a1e ("IPVS: Backup, Adding Version 1 receive capability") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit 875ebe94 upstream. Anton has a busy ppc64le KVM box where guests sometimes hit the infamous "kernel BUG at kernel/smpboot.c:134!" issue during boot: BUG_ON(td->cpu != smp_processor_id()); Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops output confirms it: CPU: 0 Comm: watchdog/130 The problem is that we aren't ensuring the CPU active bit is set for the secondary before allowing the master to continue on. The master unparks the secondary CPU's kthreads and the scheduler looks for a CPU to run on. It calls select_task_rq() and realises the suggested CPU is not in the cpus_allowed mask. It then ends up in select_fallback_rq(), and since the active bit isnt't set we choose some other CPU to run on. This seems to have been introduced by 6acbfb96 "sched: Fix hotplug vs. set_cpus_allowed_ptr()", which changed from setting active before online to setting active after online. However that was in turn fixing a bug where other code assumed an active CPU was also online, so we can't just revert that fix. The simplest fix is just to spin waiting for both active & online to be set. We already have a barrier prior to set_cpu_online() (which also sets active), to ensure all other setup is completed before online & active are set. Fixes: 6acbfb96 ("sched: Fix hotplug vs. set_cpus_allowed_ptr()") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Jiri Slaby authored
commit e8932869 upstream. On gcc5 the kernel does not link: ld: .eh_frame_hdr table[4] FDE at 0000000000000648 overlaps table[5] FDE at 0000000000000670. Because prior GCC versions always emitted NOPs on ALIGN directives, but gcc5 started omitting them. .LSTARTFDEDLSI1 says: /* HACK: The dwarf2 unwind routines will subtract 1 from the return address to get an address in the middle of the presumed call instruction. Since we didn't get here via a call, we need to include the nop before the real start to make up for it. */ .long .LSTART_sigreturn-1-. /* PC-relative start address */ But commit 69d0627a ("x86 vDSO: reorder vdso32 code") from 2.6.25 replaced .org __kernel_vsyscall+32,0x90 by ALIGN right before __kernel_sigreturn. Of course, ALIGN need not generate any NOP in there. Esp. gcc5 collapses vclock_gettime.o and int80.o together with no generated NOPs as "ALIGN". So fix this by adding to that point at least a single NOP and make the function ALIGN possibly with more NOPs then. Kudos for reporting and diagnosing should go to Richard. Reported-by:
Richard Biener <rguenther@suse.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1425543211-12542-1-git-send-email-jslaby@suse.czSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Oleg Nesterov authored
commit f4c36863 upstream. drop_fpu() does clear_used_math() and usually this is correct because tsk == current. However switch_fpu_finish()->restore_fpu_checking() is called before __switch_to() updates the "current_task" variable. If it fails, we will wrongly clear the PF_USED_MATH flag of the previous task. So use clear_stopped_child_used_math() instead. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pekka Riikonen <priikone@iki.fi> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150309171041.GB11388@redhat.comSigned-off-by:
-
Oleg Nesterov authored
commit a7c80ebc upstream. math_state_restore() assumes it is called with irqs disabled, but this is not true if the caller is __restore_xstate_sig(). This means that if ia32_fxstate == T and __copy_from_user() fails, __restore_xstate_sig() returns with irqs disabled too. This triggers: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:41 dump_stack ___might_sleep ? _raw_spin_unlock_irqrestore __might_sleep down_read ? _raw_spin_unlock_irqrestore print_vma_addr signal_fault sys32_rt_sigreturn Change __restore_xstate_sig() to call set_used_math() unconditionally. This avoids enabling and disabling interrupts in math_state_restore(). If copy_from_user() fails, we can simply do fpu_finit() by hand. [ Note: this is only the first step. math_state_restore() should not check used_math(), it should set this flag. While init_fpu() should simply die. ] Signed-off-by:
-
Stephan Mueller authored
commit ccfe8c3f upstream. The kernel crypto API logic requires the caller to provide the length of (ciphertext || authentication tag) as cryptlen for the AEAD decryption operation. Thus, the cipher implementation must calculate the size of the plaintext output itself and cannot simply use cryptlen. The RFC4106 GCM decryption operation tries to overwrite cryptlen memory in req->dst. As the destination buffer for decryption only needs to hold the plaintext memory but cryptlen references the input buffer holding (ciphertext || authentication tag), the assumption of the destination buffer length in RFC4106 GCM operation leads to a too large size. This patch simply uses the already calculated plaintext size. In addition, this patch fixes the offset calculation of the AAD buffer pointer: as mentioned before, cryptlen already includes the size of the tag. Thus, the tag does not need to be added. With the addition, the AAD will be written beyond the already allocated buffer. Note, this fixes a kernel crash that can be triggered from user space via AF_ALG(aead) -- simply use the libkcapi test application from [1] and update it to use rfc4106-gcm-aes. Using [1], the changes were tested using CAVS vectors to demonstrate that the crypto operation still delivers the right results. [1] http://www.chronox.de/libkcapi.html CC: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
James Bottomley authored
commit 6302ce4d upstream. This crash was reported: [ 366.947370] sd 3:0:1:0: [sdb] Spinning up disk.... [ 368.804046] BUG: unable to handle kernel NULL pointer dereference at (null) [ 368.804072] IP: [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804098] PGD 0 [ 368.804114] Oops: 0002 [#1] SMP [ 368.804143] CPU 1 [ 368.804151] Modules linked in: sg netconsole s3g(PO) uinput joydev hid_multitouch usbhid hid snd_hda_codec_via cpufreq_userspace cpufreq_powersave cpufreq_stats uhci_hcd cpufreq_conservative snd_hda_intel snd_hda_codec snd_hwdep snd_pcm sdhci_pci snd_page_alloc sdhci snd_timer snd psmouse evdev serio_raw pcspkr soundcore xhci_hcd shpchp s3g_drm(O) mvsas mmc_core ahci libahci drm i2c_core acpi_cpufreq mperf video processor button thermal_sys dm_dmirror exfat_fs exfat_core dm_zcache dm_mod padlock_aes aes_generic padlock_sha iscsi_target_mod target_core_mod configfs sswipe libsas libata scsi_transport_sas picdev via_cputemp hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif usb_storage scsi_mod ehci_hcd usbcore usb_common [ 368.804749] [ 368.804764] Pid: 392, comm: kworker/u:3 Tainted: P W O 3.4.87-logicube-ng.22 #1 To be filled by O.E.M. To be filled by O.E.M./EPIA-M920 [ 368.804802] RIP: 0010:[<ffffffff81358457>] [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804827] RSP: 0018:ffff880117001cc0 EFLAGS: 00010246 [ 368.804842] RAX: 0000000000000000 RBX: ffff8801185030d0 RCX: ffff88008edcb420 [ 368.804857] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8801185030d4 [ 368.804873] RBP: ffff8801181531c0 R08: 0000000000000020 R09: 00000000fffffffe [ 368.804885] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801185030d4 [ 368.804899] R13: 0000000000000002 R14: ffff880117001fd8 R15: ffff8801185030d8 [ 368.804916] FS: 0000000000000000(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000 [ 368.804931] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 368.804946] CR2: 0000000000000000 CR3: 000000000160b000 CR4: 00000000000006e0 [ 368.804962] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 368.804978] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 368.804995] Process kworker/u:3 (pid: 392, threadinfo ffff880117000000, task ffff8801181531c0) [ 368.805009] Stack: [ 368.805017] ffff8801185030d8 0000000000000000 ffffffff8161ddf0 ffffffff81056f7c [ 368.805062] 000000000000b503 ffff8801185030d0 ffff880118503000 0000000000000000 [ 368.805100] ffff8801185030d0 ffff8801188b8000 ffff88008edcb420 ffffffff813583ac [ 368.805135] Call Trace: [ 368.805153] [<ffffffff81056f7c>] ? up+0xb/0x33 [ 368.805168] [<ffffffff813583ac>] ? mutex_lock+0x16/0x25 [ 368.805194] [<ffffffffa018c414>] ? smp_execute_task+0x4e/0x222 [libsas] [ 368.805217] [<ffffffffa018ce1c>] ? sas_find_bcast_dev+0x3c/0x15d [libsas] [ 368.805240] [<ffffffffa018ce4f>] ? sas_find_bcast_dev+0x6f/0x15d [libsas] [ 368.805264] [<ffffffffa018e989>] ? sas_ex_revalidate_domain+0x37/0x2ec [libsas] [ 368.805280] [<ffffffff81355a2a>] ? printk+0x43/0x48 [ 368.805296] [<ffffffff81359a65>] ? _raw_spin_unlock_irqrestore+0xc/0xd [ 368.805318] [<ffffffffa018b767>] ? sas_revalidate_domain+0x85/0xb6 [libsas] [ 368.805336] [<ffffffff8104e5d9>] ? process_one_work+0x151/0x27c [ 368.805351] [<ffffffff8104f6cd>] ? worker_thread+0xbb/0x152 [ 368.805366] [<ffffffff8104f612>] ? manage_workers.isra.29+0x163/0x163 [ 368.805382] [<ffffffff81052c4e>] ? kthread+0x79/0x81 [ 368.805399] [<ffffffff8135fea4>] ? kernel_thread_helper+0x4/0x10 [ 368.805416] [<ffffffff81052bd5>] ? kthread_flush_work_fn+0x9/0x9 [ 368.805431] [<ffffffff8135fea0>] ? gs_change+0x13/0x13 [ 368.805442] Code: 83 7d 30 63 7e 04 f3 90 eb ab 4c 8d 63 04 4c 8d 7b 08 4c 89 e7 e8 fa 15 00 00 48 8b 43 10 4c 89 3c 24 48 89 63 10 48 89 44 24 08 <48> 89 20 83 c8 ff 48 89 6c 24 10 87 03 ff c8 74 35 4d 89 ee 41 [ 368.805851] RIP [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.805877] RSP <ffff880117001cc0> [ 368.805886] CR2: 0000000000000000 [ 368.805899] ---[ end trace b720682065d8f4cc ]--- It's directly caused by 89d3cf6a [SCSI] libsas: add mutex for SMP task execution, but shows a deeper cause: expander functions expect to be able to cast to and treat domain devices as expanders. The correct fix is to only do expander discover when we know we've got an expander device to avoid wrongly casting a non-expander device. Reported-by:
Praveen Murali <pmurali@logicube.com> Tested-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Jan Beulich authored
commit af6fc858 upstream. Otherwise the guest can abuse that control to cause e.g. PCIe Unsupported Request responses by disabling memory and/or I/O decoding and subsequently causing (CPU side) accesses to the respective address ranges, which (depending on system configuration) may be fatal to the host. Note that to alter any of the bits collected together as PCI_COMMAND_GUEST permissive mode is now required to be enabled globally or on the specific device. This is CVE-2015-2150 / XSA-120. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Ryusuke Konishi authored
commit 283ee148 upstream. According to a report from Yuxuan Shui, nilfs2 in kernel 3.19 got stuck during recovery at mount time. The code path that caused the deadlock was as follows: nilfs_fill_super() load_nilfs() nilfs_salvage_orphan_logs() * Do roll-forwarding, attach segment constructor for recovery, and kick it. nilfs_segctor_thread() nilfs_segctor_thread_construct() * A lock is held with nilfs_transaction_lock() nilfs_segctor_do_construct() nilfs_segctor_drop_written_files() iput() iput_final() write_inode_now() writeback_single_inode() __writeback_single_inode() do_writepages() nilfs_writepage() nilfs_construct_dsync_segment() nilfs_transaction_lock() --> deadlock This can happen if commit 7ef3ff2f ("nilfs2: fix deadlock of segment constructor over I_SYNC flag") is applied and roll-forward recovery was performed at mount time. The roll-forward recovery can happen if datasync write is done and the file system crashes immediately after that. For instance, we can reproduce the issue with the following steps: < nilfs2 is mounted on /nilfs (device: /dev/sdb1) > # dd if=/dev/zero of=/nilfs/test bs=4k count=1 && sync # dd if=/dev/zero of=/nilfs/test conv=notrunc oflag=dsync bs=4k count=1 && reboot -nfh < the system will immediately reboot > # mount -t nilfs2 /dev/sdb1 /nilfs The deadlock occurs because iput() can run segment constructor through writeback_single_inode() if MS_ACTIVE flag is not set on sb->s_flags. The above commit changed segment constructor so that it calls iput() asynchronously for inodes with i_nlink == 0, but that change was imperfect. This fixes the another deadlock by deferring iput() in segment constructor even for the case that mount is not finished, that is, for the case that MS_ACTIVE flag is not set. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by:
Yuxuan Shui <yshuiv7@gmail.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Doug Anderson authored
commit 29d62ec5 upstream. Normally _regulator_do_enable() isn't called on an already-enabled rdev. That's because the main caller, _regulator_enable() always calls _regulator_is_enabled() and only calls _regulator_do_enable() if the rdev was not already enabled. However, there is one caller of _regulator_do_enable() that doesn't check: regulator_suspend_finish(). While we might want to make regulator_suspend_finish() behave more like _regulator_enable(), it's probably also a good idea to make _regulator_do_enable() robust if it is called on an already enabled rdev. At the moment, _regulator_do_enable() is _not_ robust for already enabled rdevs if we're using an ena_pin. Each time _regulator_do_enable() is called for an rdev using an ena_pin the reference count of the ena_pin is incremented even if the rdev was already enabled. This is not as intended because the ena_pin is for something else: for keeping track of how many active rdevs there are sharing the same ena_pin. Here's how the reference counting works here: * Each time _regulator_enable() is called we increment rdev->use_count, so _regulator_enable() calls need to be balanced with _regulator_disable() calls. * There is no explicit reference counting in _regulator_do_enable() which is normally just a warapper around rdev->desc->ops->enable() with code for supporting delays. It's not expected that the "ops->enable()" call do reference counting. * Since regulator_ena_gpio_ctrl() does have reference counting (handling the sharing of the pin amongst multiple rdevs), we shouldn't call it if the current rdev is already enabled. Note that as part of this we cleanup (remove) the initting of ena_gpio_state in regulator_register(). In _regulator_do_enable(), _regulator_do_disable() and _regulator_is_enabled() is is clear that ena_gpio_state should be the state of whether this particular rdev has requested the GPIO be enabled. regulator_register() was initting it as the actual state of the pin. Fixes: 967cfb18 ("regulator: core: manage enable GPIO list") Signed-off-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Javier Martinez Canillas authored
commit 0548bf4f upstream. The _regulator_do_enable() call ought to be a no-op when called on an already-enabled regulator. However, as an optimization _regulator_enable() doesn't call _regulator_do_enable() on an already enabled regulator. That means we never test the case of calling _regulator_do_enable() during normal usage and there may be hidden bugs or warnings. We have seen warnings issued by the tps65090 driver and bugs when using the GPIO enable pin. Let's match the same optimization that _regulator_enable() in regulator_suspend_finish(). That may speed up suspend/resume and also avoids exposing hidden bugs. [Use much clearer commit message from Doug Anderson] Signed-off-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by:
-
Takashi Iwai authored
commit cc261738 upstream. The commit [ef403edb: ALSA: hda - Don't access stereo amps for mono channel widgets] fixed the handling of mono widgets in general, but it still misses an exceptional case: namely, a mono mixer widget taking a single stereo input. In this case, it has stereo volumes although it's a mono widget, and thus we have to take care of both left and right input channels, as stated in HD-audio spec ("7.1.3 Widget Interconnection Rules"). This patch covers this missing piece by adding proper checks of stereo amps in both the generic parser and the proc output codes. Reported-by:
Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 2ddee91a upstream. MacBook Air 5,2 has the same problem as MacBook Pro 8,1 where the built-in mic records only the right channel. Apply the same workaround as MBP8,1 to spread the mono channel via a Cirrus codec vendor-specific COEF setup. Reported-and-tested-by:
Vasil Zlatanov <vasil.zlatanov@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit bad994f5 upstream. CS420x codecs seem to deal only the single amps of ADC nodes even though the nodes receive multiple inputs. This leads to the inconsistent amp value after S3/S4 resume, for example. The fix is just to set codec->single_adc_amp flag. Then the driver handles these ADC amps as if single connections. Reported-and-tested-by:
-
Takashi Iwai authored
commit ef403edb upstream. The current HDA generic parser initializes / modifies the amp values always in stereo, but this seems causing the problem on ALC3229 codec that has a few mono channel widgets: namely, these mono widgets react to actions for both channels equally. In the driver code, we do care the mono channel and create a control only for the left channel (as defined in HD-audio spec) for such a node. When the control is updated, only the left channel value is changed. However, in the resume, the right channel value is also restored from the initial value we took as stereo, and this overwrites the left channel value. This ends up being the silent output as the right channel has been never touched and remains muted. This patch covers the places where unconditional stereo amp accesses are done and converts to the conditional accesses. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94581Signed-off-by:
-
Takashi Iwai authored
commit ddb6ca75 upstream. Compaq Presario CQ60 laptop with CX20561 gives a wrong pin for the built-in mic NID 0x17 instead of NID 0x1d, and it results in the non-working mic. This patch just remaps the pin correctly via fixup. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=920604Signed-off-by:
-
Takashi Iwai authored
commit be3bb823 upstream. There was no check about the id string of user control elements, so we accepted even a control element with an empty string, which is obviously bogus. This patch adds more sanity checks of id strings. Signed-off-by:
-
Alexander Sverdlin authored
commit cd6fa8d2 upstream. Commit fd316941 ("spi/pl022: disable port when unused") introduced a race, which leads to possible driver lock up (easily reproducible on SMP). The problem happens in giveback() function where the completion of the transfer is signalled to SPI subsystem and then the HW SPI controller is disabled. Another transfer might be setup in between, which brings driver in locked-up state. Exact event sequence on SMP: core0 core1 => pump_transfers() /* message->state == STATE_DONE */ => giveback() => spi_finalize_current_message() => pl022_unprepare_transfer_hardware() => pl022_transfer_one_message => flush() => do_interrupt_dma_transfer() => set_up_next_transfer() /* Enable SSP, turn on interrupts */ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase)); ... => pl022_interrupt_handler() => readwriter() /* disable the SPI/SSP operation */ => writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); Lockup! SPI controller is disabled and the data will never be received. Whole SPI subsystem is waiting for transfer ACK and blocked. So, only signal transfer completion after disabling the controller. Fixes: fd316941 (spi/pl022: disable port when unused) Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
jmlatten@linux.vnet.ibm.com authored
commit 62dfd912 upstream. Problem: When IMA and VTPM are both enabled in kernel config, kernel hangs during bootup on LE OS. Why?: IMA calls tpm_pcr_read() which results in tpm_ibmvtpm_send and tpm_ibmtpm_recv getting called. A trace showed that tpm_ibmtpm_recv was hanging. Resolution: tpm_ibmtpm_recv was hanging because tpm_ibmvtpm_send was sending CRQ message that probably did not make much sense to phype because of Endianness. The fix below sends correctly converted CRQ for LE. This was not caught before because it seems IMA is not enabled by default in kernel config and IMA exercises this particular code path in vtpm. Tested with IMA and VTPM enabled in kernel config and VTPM enabled on both a BE OS and a LE OS ppc64 lpar. This exercised CRQ and TPM command code paths in vtpm. Patch is against Peter's tpmdd tree on github which included Vicky's previous vtpm le patches. Signed-off-by:
Joy Latten <jmlatten@linux.vnet.ibm.com> Reviewed-by:
Ashley Lai <ashley@ahsleylai.com> Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Tejun Heo authored
commit 8603e1b3 upstream. cancel[_delayed]_work_sync() are implemented using __cancel_work_timer() which grabs the PENDING bit using try_to_grab_pending() and then flushes the work item with PENDING set to prevent the on-going execution of the work item from requeueing itself. try_to_grab_pending() can always grab PENDING bit without blocking except when someone else is doing the above flushing during cancelation. In that case, try_to_grab_pending() returns -ENOENT. In this case, __cancel_work_timer() currently invokes flush_work(). The assumption is that the completion of the work item is what the other canceling task would be waiting for too and thus waiting for the same condition and retrying should allow forward progress without excessive busy looping Unfortunately, this doesn't work if preemption is disabled or the latter task has real time priority. Let's say task A just got woken up from flush_work() by the completion of the target work item. If, before task A starts executing, task B gets scheduled and invokes __cancel_work_timer() on the same work item, its try_to_grab_pending() will return -ENOENT as the work item is still being canceled by task A and flush_work() will also immediately return false as the work item is no longer executing. This puts task B in a busy loop possibly preventing task A from executing and clearing the canceling state on the work item leading to a hang. task A task B worker executing work __cancel_work_timer() try_to_grab_pending() set work CANCELING flush_work() block for work completion completion, wakes up A __cancel_work_timer() while (forever) { try_to_grab_pending() -ENOENT as work is being canceled flush_work() false as work is no longer executing } This patch removes the possible hang by updating __cancel_work_timer() to explicitly wait for clearing of CANCELING rather than invoking flush_work() after try_to_grab_pending() fails with -ENOENT. Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com v3: bit_waitqueue() can't be used for work items defined in vmalloc area. Switched to custom wake function which matches the target work item and exclusive wait and wakeup. v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if the target bit waitqueue has wait_bit_queue's on it. Use DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu Vizoso. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Rabin Vincent <rabin.vincent@axis.com> Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com> Tested-by:
Jesper Nilsson <jesper.nilsson@axis.com> Tested-by:
-
Oliver Hartkopp authored
commit 96943901 upstream. When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient this can lead to a skb_under_panic due to missing skb initialisations. Add the missing initialisations at the CAN skbuff creation times on driver level (rx path) and in the network layer (tx path). Reported-by:
Austin Schuh <austin@peloton-tech.com> Reported-by:
Daniel Steer <daniel.steer@mclaren.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Russell King authored
commit f2e0ea86 upstream. I'm still receiving reports to my email address, so let's point this at the linux-serial mailing list instead. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Michael S. Tsirkin authored
commit 4f6e24ed upstream. when multiport is off, we don't initialize config work, but we then cancel uninitialized control_work on freeze. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Miklos Szeredi authored
commit 0d278362 upstream. fuse_try_move_page() is not prepared for replacing pages that have already been read. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Miklos Szeredi authored
commit aa991b3b upstream. Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set PG_uptodate. Don't warn on this condition, just set the uptodate flag. Signed-off-by:
-
Christian König authored
commit a17d4996 upstream. Just keep it working, seems to fix some PLL problems. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73378Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 54acf107 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit 0586915e upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit 9d1393f2 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit f957063f upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit c320bb5f upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Tommi Rantala authored
commit a28b2a47 upstream. Passing zeroed drm_radeon_cs struct to DRM_IOCTL_RADEON_CS produces the following oops. Fix by always calling INIT_LIST_HEAD() to avoid the crash in list_sort(). ---------------------------------- #include <stdint.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <drm/radeon_drm.h> static const struct drm_radeon_cs cs; int main(int argc, char **argv) { return ioctl(open(argv[1], O_RDWR), DRM_IOCTL_RADEON_CS, &cs); } ---------------------------------- [ttrantal@test2 ~]$ ./main /dev/dri/card0 [ 46.904650] BUG: unable to handle kernel NULL pointer dereference at (null) [ 46.905022] IP: [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] PGD 68f29067 PUD 688b5067 PMD 0 [ 46.905022] Oops: 0002 [#1] SMP [ 46.905022] CPU: 0 PID: 2413 Comm: main Not tainted 4.0.0-rc1+ #58 [ 46.905022] Hardware name: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v02.10 01/25/2007 [ 46.905022] task: ffff880058e2bcc0 ti: ffff880058e64000 task.ti: ffff880058e64000 [ 46.905022] RIP: 0010:[<ffffffff814d6df2>] [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP: 0018:ffff880058e67998 EFLAGS: 00010246 [ 46.905022] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 46.905022] RDX: ffffffff81644410 RSI: ffff880058e67b40 RDI: ffff880058e67a58 [ 46.905022] RBP: ffff880058e67a88 R08: 0000000000000000 R09: 0000000000000000 [ 46.905022] R10: ffff880058e2bcc0 R11: ffffffff828e6ca0 R12: ffffffff81644410 [ 46.905022] R13: ffff8800694b8018 R14: 0000000000000000 R15: ffff880058e679b0 [ 46.905022] FS: 00007fdc65a65700(0000) GS:ffff88006d600000(0000) knlGS:0000000000000000 [ 46.905022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.905022] CR2: 0000000000000000 CR3: 0000000058dd9000 CR4: 00000000000006f0 [ 46.905022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 46.905022] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 46.905022] Stack: [ 46.905022] ffff880058e67b40 ffff880058e2bcc0 ffff880058e67a78 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] Call Trace: [ 46.905022] [<ffffffff81644a65>] radeon_cs_parser_fini+0x195/0x220 [ 46.905022] [<ffffffff81645069>] radeon_cs_ioctl+0xa9/0x960 [ 46.905022] [<ffffffff815e1f7c>] drm_ioctl+0x19c/0x640 [ 46.905022] [<ffffffff810f8fdd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 46.905022] [<ffffffff810f90ad>] ? trace_hardirqs_on+0xd/0x10 [ 46.905022] [<ffffffff8160c066>] radeon_drm_ioctl+0x46/0x80 [ 46.905022] [<ffffffff81211868>] do_vfs_ioctl+0x318/0x570 [ 46.905022] [<ffffffff81462ef6>] ? selinux_file_ioctl+0x56/0x110 [ 46.905022] [<ffffffff81211b41>] SyS_ioctl+0x81/0xa0 [ 46.905022] [<ffffffff81dc6312>] system_call_fastpath+0x12/0x17 [ 46.905022] Code: 48 89 b5 10 ff ff ff 0f 84 03 01 00 00 4c 8d bd 28 ff ff ff 31 c0 48 89 fb b9 15 00 00 00 49 89 d4 4c 89 ff f3 48 ab 48 8b 46 08 <48> c7 00 00 00 00 00 48 8b 0e 48 85 c9 0f 84 7d 00 00 00 c7 85 [ 46.905022] RIP [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP <ffff880058e67998> [ 46.905022] CR2: 0000000000000000 [ 47.149253] ---[ end trace 09576b4e8b2c20b8 ]--- Reviewed-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 355a901e ] While working on sk_forward_alloc problems reported by Denys Fedoryshchenko, we found that tcp connect() (and fastopen) do not call sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so sk_forward_alloc is negative while connect is in progress. We can fix this by calling regular sk_stream_alloc_skb() both for the SYN packet (in tcp_connect()) and the syn_data packet in tcp_send_syn_data() Then, tcp_send_syn_data() can avoid copying syn_data as we simply can manipulate syn_data->cb[] to remove SYN flag (and increment seq) Instead of open coding memcpy_fromiovecend(), simply use this helper. This leaves in socket write queue clean fast clone skbs. This was tested against our fastopen packetdrill tests. Reported-by:
Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Catalin Marinas authored
[ Upstream commit 91edd096 ] Commit db31c55a (net: clamp ->msg_namelen instead of returning an error) introduced the clamping of msg_namelen when the unsigned value was larger than sizeof(struct sockaddr_storage). This caused a msg_namelen of -1 to be valid. The native code was subsequently fixed by commit dbb490b9 (net: socket: error on a negative msg_namelen). In addition, the native code sets msg_namelen to 0 when msg_name is NULL. This was done in commit (6a2a2b3a net:socket: set msg_namelen to 0 if msg_name is passed as NULL in msghdr struct from userland) and subsequently updated by 08adb7da (fold verify_iovec() into copy_msghdr_from_user()). This patch brings the get_compat_msghdr() in line with copy_msghdr_from_user(). Fixes: db31c55a (net: clamp ->msg_namelen instead of returning an error) Cc: David S. Miller <davem@davemloft.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Josh Hunt authored
[ Upstream commit d22e1537 ] tcp_send_fin() does not account for the memory it allocates properly, so sk_forward_alloc can be negative in cases where we've sent a FIN: ss example output (ss -amn | grep -B1 f4294): tcp FIN-WAIT-1 0 1 192.168.0.1:45520 192.0.2.1:8080 skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0) Acked-by:
-
Ondrej Zary authored
[ Upstream commit 8d006e01 ] This reverts commit 11ad714b because it breaks cx82310_eth. The custom USB_DEVICE_CLASS macro matches bDeviceClass, bDeviceSubClass and bDeviceProtocol but the common USB_DEVICE_AND_INTERFACE_INFO matches bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are not specified. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Al Viro authored
[ Upstream commit 7d985ed1 ] [I would really like an ACK on that one from dhowells; it appears to be quite straightforward, but...] MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit in there. It gets passed via flags; in fact, another such check in the same function is done correctly - as flags & MSG_PEEK. It had been that way (effectively disabled) for 8 years, though, so the patch needs beating up - that case had never been tested. If it is correct, it's -stable fodder. Signed-off-by:
-
Al Viro authored
[ Upstream commit 3eeff778 ] It should be checking flags, not msg->msg_flags. It's ->sendmsg() instances that need to look for that in ->msg_flags, ->recvmsg() ones (including the other ->recvmsg() instance in that file, as well as unix_dgram_recvmsg() this one claims to be imitating) check in flags. Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC in receive") back in 2010, so it goes quite a while back. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c8e2c80d ] inet_diag_dump_one_icsk() allocates too small skb. Add inet_sk_attr_size() helper right before inet_sk_diag_fill() so that it can be updated if/when new attributes are added. iproute2/ss currently does not use this dump_one() interface, this might explain nobody noticed this problem yet. Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit f862e07c ] The rds_iw_update_cm_id function stores a large 'struct rds_sock' object on the stack in order to pass a pair of addresses. This happens to just fit withint the 1024 byte stack size warning limit on x86, but just exceed that limit on ARM, which gives us this warning: net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] As the use of this large variable is basically bogus, we can rearrange the code to not do that. Instead of passing an rds socket into rds_iw_get_device, we now just pass the two addresses that we have available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly, to create two address structures on the stack there. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
