- 10 Sep, 2020 4 commits
-
-
Geliang Tang authored
This patch set the init remote_id to zero, otherwise it will be a random number. Then it added the missing subflow's remote_id setting code both in __mptcp_subflow_connect and in subflow_ulp_clone. Fixes: 01cacb00 ("mptcp: add netlink-based PM") Fixes: ec3edaa7 ("mptcp: Add handling of outgoing MP_JOIN requests") Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
In mptcp_pm_nl_get_local_id, skc_local is the same as msk_local, so it always return 0. Thus every subflow's local_id is 0. It's incorrect. This patch fixed this issue. Also, we need to ignore the zero address here, like 0.0.0.0 in IPv4. When we use the zero address as a local address, it means that we can use any one of the local addresses. The zero address is not a new address, we don't need to add it to PM, so this patch added a new function address_zero to check whether an address is the zero address, if it is, we ignore this address. Fixes: 01cacb00 ("mptcp: add netlink-based PM") Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Tetsuo Handa authored
I confirmed that the problem fixed by commit 2a63866c ("tipc: fix shutdown() of connectionless socket") also applies to stream socket. ---------- #include <sys/socket.h> #include <unistd.h> #include <sys/wait.h> int main(int argc, char *argv[]) { int fds[2] = { -1, -1 }; socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds); if (fork() == 0) _exit(read(fds[0], NULL, 1)); shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */ wait(NULL); /* To be woken up by _exit(). */ return 0; } ---------- Since shutdown(SHUT_RDWR) should affect all processes sharing that socket, unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right behavior. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
David S. Miller authored
Evgeniy does not have the time nor capacity to maintain the connector subsystem any longer, so just move it under networking as that is effectively what has been happening lately. Signed-off-by:
-
- 09 Sep, 2020 19 commits
-
-
David S. Miller authored
Igor Russkikh says: ==================== net: qed disable aRFS in NPAR and 100G This patchset fixes some recent issues found by customers. v3: resending on Dmitry's behalf v2: correct hash in Fixes tag ==================== Signed-off-by: -
Dmitry Bogdanov authored
Fix the assert during VF driver installation when the personality is iWARP Fixes: 1fe614d1 ("qed: Relax VF firmware requirements") Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
-
Dmitry Bogdanov authored
In some configurations ARFS cannot be used, so disable it if device is not capable. Fixes: e4917d46 ("qede: Add aRFS support") Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
-
Dmitry Bogdanov authored
In CMT and NPAR the PF is unknown when the GFS block processes the packet. Therefore cannot use searcher as it has a per PF database, and thus ARFS must be disabled. Fixes: d51e4af5 ("qed: aRFS infrastructure support") Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-2020-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.9 First set of fixes for v5.9, small but important. brcmfmac * fix a throughput regression on bcm4329 mt76 * fix a regression with stations reconnecting on mt7616 * properly free tx skbs, it was working by accident before mwifiex * fix a regression with 256 bit encryption keys wlcore * revert AES CMAC support as it caused a regression ==================== Signed-off-by:
-
David S. Miller authored
Jason A. Donenfeld says: ==================== wireguard fixes for 5.9-rc5 Yesterday, Eric reported a race condition found by syzbot. This series contains two commits, one that fixes the direct issue, and another that addresses the more general issue, as a defense in depth. 1) The basic problem syzbot unearthed was that one particular mutation of handshake->entry was not protected by the handshake mutex like the other cases, so this patch basically just reorders a line to make sure the mutex is actually taken at the right point. Most of the work here went into making sure the race was fully understood and making a reproducer (which syzbot was unable to do itself, due to the rarity of the race). 2) Eric's initial suggestion for fixing this was taking a spinlock around the hash table replace function where the null ptr deref was happening. This doesn't address the main problem in the most precise possible way like (1) does, but it is a good suggestion for defense-in-depth, in case related issues come up in the future, and basically costs nothing from a performance perspective. I thought it aided in implementing a good general rule: all mutators of that hash table take the table lock. So that's part of this series as a companion. Both of these contain Fixes: tags and are good candidates for stable. ==================== Signed-off-by: -
Jason A. Donenfeld authored
Eric's suggested fix for the previous commit's mentioned race condition was to simply take the table->lock in wg_index_hashtable_replace(). The table->lock of the hash table is supposed to protect the bucket heads, not the entires, but actually, since all the mutator functions are already taking it, it makes sense to take it too for the test to hlist_unhashed, as a defense in depth measure, so that it no longer races with deletions, regardless of what other locks are protecting individual entries. This is sensible from a performance perspective because, as Eric pointed out, the case of being unhashed is already the unlikely case, so this won't add common contention. And comparing instructions, this basically doesn't make much of a difference other than pushing and popping %r13, used by the new `bool ret`. More generally, I like the idea of locking consistency across table mutator functions, and this might let me rest slightly easier at night. Suggested-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/wireguard/20200908145911.4090480-1-edumazet@google.com/ Fixes: e7096c13 ("net: WireGuard secure network tunnel") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Jason A. Donenfeld authored
Eric reported that syzkaller found a race of this variety: CPU 1 CPU 2 -------------------------------------------|--------------------------------------- wg_index_hashtable_replace(old, ...) | if (hlist_unhashed(&old->index_hash)) | | wg_index_hashtable_remove(old) | hlist_del_init_rcu(&old->index_hash) | old->index_hash.pprev = NULL hlist_replace_rcu(&old->index_hash, ...) | *old->index_hash.pprev | Syzbot wasn't actually able to reproduce this more than once or create a reproducer, because the race window between checking "hlist_unhashed" and calling "hlist_replace_rcu" is just so small. Adding an mdelay(5) or similar there helps make this demonstrable using this simple script: #!/bin/bash set -ex trap 'kill $pid1; kill $pid2; ip link del wg0; ip link del wg1' EXIT ip link add wg0 type wireguard ip link add wg1 type wireguard wg set wg0 private-key <(wg genkey) listen-port 9999 wg set wg1 private-key <(wg genkey) peer $(wg show wg0 public-key) endpoint 127.0.0.1:9999 persistent-keepalive 1 wg set wg0 peer $(wg show wg1 public-key) ip link set wg0 up yes link set wg1 up | ip -force -batch - & pid1=$! yes link set wg1 down | ip -force -batch - & pid2=$! wait The fundumental underlying problem is that we permit calls to wg_index_ hashtable_remove(handshake.entry) without requiring the caller to take the handshake mutex that is intended to protect members of handshake during mutations. This is consistently the case with calls to wg_index_ hashtable_insert(handshake.entry) and wg_index_hashtable_replace( handshake.entry), but it's missing from a pertinent callsite of wg_ index_hashtable_remove(handshake.entry). So, this patch makes sure that mutex is taken. The original code was a little bit funky though, in the form of: remove(handshake.entry) lock(), memzero(handshake.some_members), unlock() remove(handshake.entry) The original intention of that double removal pattern outside the lock appears to be some attempt to prevent insertions that might happen while locks are dropped during expensive crypto operations, but actually, all callers of wg_index_hashtable_insert(handshake.entry) take the write lock and then explicitly check handshake.state, as they should, which the aforementioned memzero clears, which means an insertion should already be impossible. And regardless, the original intention was necessarily racy, since it wasn't guaranteed that something else would run after the unlock() instead of after the remove(). So, from a soundness perspective, it seems positive to remove what looks like a hack at best. The crash from both syzbot and from the script above is as follows: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 7395 Comm: kworker/0:3 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-kex-wg1 wg_packet_handshake_receive_worker RIP: 0010:hlist_replace_rcu include/linux/rculist.h:505 [inline] RIP: 0010:wg_index_hashtable_replace+0x176/0x330 drivers/net/wireguard/peerlookup.c:174 Code: 00 fc ff df 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 44 01 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 10 48 89 c6 48 c1 ee 03 <80> 3c 0e 00 0f 85 06 01 00 00 48 85 d2 4c 89 28 74 47 e8 a3 4f b5 RSP: 0018:ffffc90006a97bf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888050ffc4f8 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88808e04e010 RBP: ffff88808e04e000 R08: 0000000000000001 R09: ffff8880543d0000 R10: ffffed100a87a000 R11: 000000000000016e R12: ffff8880543d0000 R13: ffff88808e04e008 R14: ffff888050ffc508 R15: ffff888050ffc500 FS: 0000000000000000(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f5505db0 CR3: 0000000097cf7000 CR4: 00000000001526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: wg_noise_handshake_begin_session+0x752/0xc9a drivers/net/wireguard/noise.c:820 wg_receive_handshake_packet drivers/net/wireguard/receive.c:183 [inline] wg_packet_handshake_receive_worker+0x33b/0x730 drivers/net/wireguard/receive.c:220 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Reported-by:syzbot <syzkaller@googlegroups.com> Reported-by:
-
Ye Bin authored
clean follow coccicheck warning: net//hsr/hsr_netlink.c:94:8-42: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:87:30-57: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:79:29-53: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net: skb_put_padto() fixes sysbot reported a bug in qrtr leading to use-after-free. First patch fixes the issue. Second patch addes __must_check attribute to avoid similar issues in the future. ==================== Signed-off-by: -
Eric Dumazet authored
skb_put_padto() and __skb_put_padto() callers must check return values or risk use-after-free. Signed-off-by:
-
Eric Dumazet authored
If skb_put_padto() returns an error, skb has been freed. Better not touch it anymore, as reported by syzbot [1] Note to qrtr maintainers : this suggests qrtr_sendmsg() should adjust sock_alloc_send_skb() second parameter to account for the potential added alignment to avoid reallocation. [1] BUG: KASAN: use-after-free in __skb_insert include/linux/skbuff.h:1907 [inline] BUG: KASAN: use-after-free in __skb_queue_before include/linux/skbuff.h:2016 [inline] BUG: KASAN: use-after-free in __skb_queue_tail include/linux/skbuff.h:2049 [inline] BUG: KASAN: use-after-free in skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 Write of size 8 at addr ffff88804d8ab3c0 by task syz-executor.4/4316 CPU: 1 PID: 4316 Comm: syz-executor.4 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1d6/0x29e lib/dump_stack.c:118 print_address_description+0x66/0x620 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 __skb_insert include/linux/skbuff.h:1907 [inline] __skb_queue_before include/linux/skbuff.h:2016 [inline] __skb_queue_tail include/linux/skbuff.h:2049 [inline] skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 qrtr_tun_send+0x1a/0x40 net/qrtr/tun.c:23 qrtr_node_enqueue+0x44f/0xc00 net/qrtr/qrtr.c:364 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f84b5b81c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000038b40 RCX: 000000000045d5b9 RDX: 0000000000000055 RSI: 0000000020001240 RDI: 0000000000000003 RBP: 00007f84b5b81ca0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000f R13: 00007ffcbbf86daf R14: 00007f84b5b829c0 R15: 000000000118cf4c Allocated by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461 slab_post_alloc_hook+0x3e/0x290 mm/slab.h:518 slab_alloc mm/slab.c:3312 [inline] kmem_cache_alloc+0x1c1/0x2d0 mm/slab.c:3482 skb_clone+0x1b2/0x370 net/core/skbuff.c:1449 qrtr_bcast_enqueue+0x6d/0x140 net/qrtr/qrtr.c:857 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free+0x82/0xf0 mm/slab.c:3693 __skb_pad+0x3f5/0x5a0 net/core/skbuff.c:1823 __skb_put_padto include/linux/skbuff.h:3233 [inline] skb_put_padto include/linux/skbuff.h:3252 [inline] qrtr_node_enqueue+0x62f/0xc00 net/qrtr/qrtr.c:360 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88804d8ab3c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 0 bytes inside of 224-byte region [ffff88804d8ab3c0, ffff88804d8ab4a0) The buggy address belongs to the page: page:00000000ea8cccfb refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804d8abb40 pfn:0x4d8ab flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002237ec8 ffffea00029b3388 ffff88821bb66800 raw: ffff88804d8abb40 ffff88804d8ab000 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Fixes: ce57785b ("net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue") Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Wei Wang authored
Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we echo the TOS value of the received packets in the response. However, we do not want to echo the lower 2 ECN bits in accordance with RFC 3168 6.1.5 robustness principles. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'ieee802154-for-davem-2020-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2020-09-08 An update from ieee802154 for your *net* tree. A potential memory leak fix for ca8210 from Liu Jian, a check on the return for a register read in adf7242 and finally a user after free fix in the softmac tx function from Eric found by syzkaller. ==================== Signed-off-by:
-
Jakub Kicinski authored
John's email has bounced and Thomas confirms he no longer works on ibmvnic. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Brian Vazquez authored
If CONFIG_IPV6=m, the IPV6 functions won't be found by the linker: ld: net/core/fib_rules.o: in function `fib_rules_lookup': fib_rules.c:(.text+0x606): undefined reference to `fib6_rule_match' ld: fib_rules.c:(.text+0x611): undefined reference to `fib6_rule_match' ld: fib_rules.c:(.text+0x68c): undefined reference to `fib6_rule_action' ld: fib_rules.c:(.text+0x693): undefined reference to `fib6_rule_action' ld: fib_rules.c:(.text+0x6aa): undefined reference to `fib6_rule_suppress' ld: fib_rules.c:(.text+0x6bc): undefined reference to `fib6_rule_suppress' make: *** [Makefile:1166: vmlinux] Error 1 Reported-by:
Sven Joachim <svenjoac@gmx.de> Fixes: b9aaec8f ("fib: use indirect call wrappers in the most common fib_rules_ops") Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
Brian Vazquez <brianvv@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: =================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Allow conntrack entries with l3num == NFPROTO_IPV4 or == NFPROTO_IPV6 only via ctnetlink, from Will McVicker. 2) Batch notifications to userspace to improve netlink socket receive utilization. 3) Restore mark based dump filtering via ctnetlink, from Martin Willi. 4) nf_conncount_init() fails with -EPROTO with CONFIG_IPV6, from Eelco Chaudron. 5) Containers fail to match on meta skuid and skgid, use socket user_ns to retrieve meta skuid and skgid. =================== Signed-off-by: -
Eric Dumazet authored
syzbot reported twice a lockdep issue in fib6_del() [1] which I think is caused by net->ipv6.fib6_null_entry having a NULL fib6_table pointer. fib6_del() already checks for fib6_null_entry special case, we only need to return earlier. Bug seems to occur very rarely, I have thus chosen a 'bug origin' that makes backports not too complex. [1] WARNING: suspicious RCU usage 5.9.0-rc4-syzkaller #0 Not tainted ----------------------------- net/ipv6/ip6_fib.c:1996 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.5/8095: #0: ffffffff8a7ea708 (rtnl_mutex){+.+.}-{3:3}, at: ppp_release+0x178/0x240 drivers/net/ppp/ppp_generic.c:401 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: spin_trylock_bh include/linux/spinlock.h:414 [inline] #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: fib6_run_gc+0x21b/0x2d0 net/ipv6/ip6_fib.c:2312 #2: ffffffff89bd6a40 (rcu_read_lock){....}-{1:2}, at: __fib6_clean_all+0x0/0x290 net/ipv6/ip6_fib.c:2613 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:359 [inline] #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: __fib6_clean_all+0x107/0x290 net/ipv6/ip6_fib.c:2245 stack backtrace: CPU: 1 PID: 8095 Comm: syz-executor.5 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 fib6_del+0x12b4/0x1630 net/ipv6/ip6_fib.c:1996 fib6_clean_node+0x39b/0x570 net/ipv6/ip6_fib.c:2180 fib6_walk_continue+0x4aa/0x8e0 net/ipv6/ip6_fib.c:2102 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2150 fib6_clean_tree+0xdb/0x120 net/ipv6/ip6_fib.c:2230 __fib6_clean_all+0x120/0x290 net/ipv6/ip6_fib.c:2246 fib6_clean_all net/ipv6/ip6_fib.c:2257 [inline] fib6_run_gc+0x113/0x2d0 net/ipv6/ip6_fib.c:2320 ndisc_netdev_event+0x217/0x350 net/ipv6/ndisc.c:1805 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2033 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline] call_netdevice_notifiers net/core/dev.c:2059 [inline] dev_close_many+0x30b/0x650 net/core/dev.c:1634 rollback_registered_many+0x3a8/0x1210 net/core/dev.c:9261 rollback_registered net/core/dev.c:9329 [inline] unregister_netdevice_queue+0x2dd/0x570 net/core/dev.c:10410 unregister_netdevice include/linux/netdevice.h:2774 [inline] ppp_release+0x216/0x240 drivers/net/ppp/ppp_generic.c:403 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 421842ed ("net/ipv6: Add fib6_null_entry") Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Since commit 845e0ebb ("net: change addr_list_lock back to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning: ============================================ WARNING: possible recursive locking detected 5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted -------------------------------------------- dhcpcd/323 is trying to acquire lock: ffff000066dd4268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 but task is already holding lock: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dsa_master_addr_list_lock_key/1); lock(&dsa_master_addr_list_lock_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by dhcpcd/323: #0: ffffdbd1381dda18 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff00006614b268 (_xmit_ETHER){+...}-{2:2}, at: dev_set_rx_mode+0x28/0x48 #2: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 stack backtrace: Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x20/0x30 dump_stack+0xec/0x158 __lock_acquire+0xca0/0x2398 lock_acquire+0xe8/0x440 _raw_spin_lock_nested+0x64/0x90 dev_mc_sync+0x44/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_mc_sync+0x84/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_set_rx_mode+0x30/0x48 __dev_open+0x10c/0x180 __dev_change_flags+0x170/0x1c8 dev_change_flags+0x2c/0x70 devinet_ioctl+0x774/0x878 inet_ioctl+0x348/0x3b0 sock_do_ioctl+0x50/0x310 sock_ioctl+0x1f8/0x580 ksys_ioctl+0xb0/0xf0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x180 do_el0_svc+0x2c/0x98 el0_sync_handler+0x9c/0x1b8 el0_sync+0x158/0x180 Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the dev->lower_level value of a DSA switch interface would be 1, which would warn when it is a DSA master. We can use netdev_upper_dev_link() to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses. There might be a chance that somebody will try to take hold of this interface and use it immediately after register_netdev() and before netdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin of register_netdev(), which is register_netdevice(). Since this warning was not there when lockdep was using dynamic keys for addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions. Fixes: 845e0ebb ("net: change addr_list_lock back to static key") Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 08 Sep, 2020 7 commits
-
-
Eric Dumazet authored
syzbot reported a bug in ieee802154_tx() [1] A similar issue in ieee802154_xmit_worker() is also fixed in this patch. [1] BUG: KASAN: use-after-free in ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 Read of size 4 at addr ffff8880251a8c70 by task syz-executor.3/928 CPU: 0 PID: 928 Comm: syz-executor.3 Not tainted 5.9.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc98e749c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000002ccc0 RCX: 000000000045d5b9 RDX: 0000000000000000 RSI: 0000000020007780 RDI: 000000000000000b RBP: 000000000118d020 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cfec R13: 00007fff690c720f R14: 00007fc98e74a9c0 R15: 000000000118cfec Allocated by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 slab_post_alloc_hook mm/slab.h:518 [inline] slab_alloc_node mm/slab.c:3254 [inline] kmem_cache_alloc_node+0x136/0x3e0 mm/slab.c:3574 __alloc_skb+0x71/0x550 net/core/skbuff.c:198 alloc_skb include/linux/skbuff.h:1094 [inline] alloc_skb_with_frags+0x92/0x570 net/core/skbuff.c:5771 sock_alloc_send_pskb+0x72a/0x880 net/core/sock.c:2348 packet_alloc_skb net/packet/af_packet.c:2837 [inline] packet_snd net/packet/af_packet.c:2932 [inline] packet_sendmsg+0x19fb/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free.part.0+0x74/0x1e0 mm/slab.c:3693 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:838 [inline] consume_skb+0xcf/0x160 net/core/skbuff.c:832 __dev_kfree_skb_any+0x9c/0xc0 net/core/dev.c:3107 fakelb_hw_xmit+0x20e/0x2a0 drivers/net/ieee802154/fakelb.c:81 drv_xmit_async net/mac802154/driver-ops.h:16 [inline] ieee802154_tx+0x282/0x480 net/mac802154/tx.c:81 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8880251a8c00 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 112 bytes inside of 224-byte region [ffff8880251a8c00, ffff8880251a8ce0) The buggy address belongs to the page: page:0000000062b6a4f1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x251a8 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0000435c88 ffffea00028b6c08 ffff8880a9055d00 raw: 0000000000000000 ffff8880251a80c0 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880251a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880251a8b80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880251a8c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880251a8c80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff8880251a8d00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: 409c3b0c ("mac802154: tx: move stats tx increment") Signed-off-by:Stefan Schmidt <stefan@datenfreihafen.org>
-
Pablo Neira Ayuso authored
... instead of using init_user_ns. Fixes: 96518518 ("netfilter: add nftables") Tested-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Eelco Chaudron authored
The openvswitch module fails initialization when used in a kernel without IPv6 enabled. nf_conncount_init() fails because the ct code unconditionally tries to initialize the netns IPv6 related bit, regardless of the build option. The change below ignores the IPv6 part if not enabled. Note that the corresponding _put() function already has this IPv6 configuration check. Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit") Signed-off-by:
Eelco Chaudron <echaudro@redhat.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Martin Willi authored
conntrack mark based dump filtering may falsely skip entries if a mask is given: If the mask-based check does not filter out the entry, the else-if check is always true and compares the mark without considering the mask. The if/else-if logic seems wrong. Given that the mask during filter setup is implicitly set to 0xffffffff if not specified explicitly, the mark filtering flags seem to just complicate things. Restore the previously used approach by always matching against a zero mask is no filter mark is given. Fixes: cb8aa9a3 ("netfilter: ctnetlink: add kernel side filtering for dump") Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
-
Pablo Neira Ayuso authored
On x86_64, each notification results in one skbuff allocation which consumes at least 768 bytes due to the skbuff overhead. This patch coalesces several notifications into one single skbuff, so each notification consumes at least ~211 bytes, that ~3.5 times less memory consumption. As a result, this is reducing the chances to exhaust the netlink socket receive buffer. Rule of thumb is that each notification batch only contains netlink messages whose report flag is the same, nfnetlink_send() requires this to do appropriate delivery to userspace, either via unicast (echo mode) or multicast (monitor mode). The skbuff control buffer is used to annotate the report flag for later handling at the new coalescing routine. The batch skbuff notification size is NLMSG_GOODSIZE, using a larger skbuff would allow for more socket receiver buffer savings (to amortize the cost of the skbuff even more), however, going over that size might break userspace applications, so let's be conservative and stick to NLMSG_GOODSIZE. Reported-by:
-
Will McVicker authored
The indexes to the nf_nat_l[34]protos arrays come from userspace. So check the tuple's family, e.g. l3num, when creating the conntrack in order to prevent an OOB memory access during setup. Here is an example kernel panic on 4.14.180 when userspace passes in an index greater than NFPROTO_NUMPROTO. Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in:... Process poc (pid: 5614, stack limit = 0x00000000a3933121) CPU: 4 PID: 5614 Comm: poc Tainted: G S W O 4.14.180-g051355490483 Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM task: 000000002a3dfffe task.stack: 00000000a3933121 pc : __cfi_check_fail+0x1c/0x24 lr : __cfi_check_fail+0x1c/0x24 ... Call trace: __cfi_check_fail+0x1c/0x24 name_to_dev_t+0x0/0x468 nfnetlink_parse_nat_setup+0x234/0x258 ctnetlink_parse_nat_setup+0x4c/0x228 ctnetlink_new_conntrack+0x590/0xc40 nfnetlink_rcv_msg+0x31c/0x4d4 netlink_rcv_skb+0x100/0x184 nfnetlink_rcv+0xf4/0x180 netlink_unicast+0x360/0x770 netlink_sendmsg+0x5a0/0x6a4 ___sys_sendmsg+0x314/0x46c SyS_sendmsg+0xb4/0x108 el0_svc_naked+0x34/0x38 This crash is not happening since 5.4+, however, ctnetlink still allows for creating entries with unsupported layer 3 protocol number. Fixes: c1d10adb ("[NETFILTER]: Add ctnetlink port for nf_conntrack") Signed-off-by:
Will McVicker <willmcvicker@google.com> [pablo@netfilter.org: rebased original patch on top of nf.git] Signed-off-by:
-
Dexuan Cui authored
mlx5_suspend()/resume() keep the network interface, so during hibernation netvsc_unregister_vf() and netvsc_register_vf() are not called, and hence netvsc_resume() should call netvsc_vf_changed() to switch the data path back to the VF after hibernation. Note: after we close and re-open the vmbus channel of the netvsc NIC in netvsc_suspend() and netvsc_resume(), the data path is implicitly switched to the netvsc NIC. Similarly, netvsc_suspend() should not call netvsc_unregister_vf(), otherwise the VF can no longer be used after hibernation. For mlx4, since the VF network interafce is explicitly destroyed and re-created during hibernation (see mlx4_suspend()/resume()), hv_netvsc already explicitly switches the data path from and to the VF automatically via netvsc_register_vf() and netvsc_unregister_vf(), so mlx4 doesn't need this fix. Note: mlx4 can still work with the fix because in netvsc_suspend()/resume() ndev_ctx->vf_netdev is NULL for mlx4. Fixes: 0efeea5f ("hv_netvsc: Add the support of hibernation") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
- 07 Sep, 2020 8 commits
-
-
Taehee Yoo authored
This reverts commit 8d7e5dee. To protect netns id, the nsid_lock is used when netns id is being allocated and removed by peernet2id_alloc() and unhash_nsid(). The nsid_lock can be used in BH context but only spin_lock() is used in this code. Using spin_lock() instead of spin_lock_bh() can result in a deadlock in the following scenario reported by the lockdep. In order to avoid a deadlock, the spin_lock_bh() should be used instead of spin_lock() to acquire nsid_lock. Test commands: ip netns del nst ip netns add nst ip link add veth1 type veth peer name veth2 ip link set veth1 netns nst ip netns exec nst ip link add name br1 type bridge vlan_filtering 1 ip netns exec nst ip link set dev br1 up ip netns exec nst ip link set dev veth1 master br1 ip netns exec nst ip link set dev veth1 up ip netns exec nst ip link add macvlan0 link br1 up type macvlan Splat looks like: [ 33.615860][ T607] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 33.617194][ T607] 5.9.0-rc1+ #665 Not tainted [ ... ] [ 33.670615][ T607] Chain exists of: [ 33.670615][ T607] &mc->mca_lock --> &bridge_netdev_addr_lock_key --> &net->nsid_lock [ 33.670615][ T607] [ 33.673118][ T607] Possible interrupt unsafe locking scenario: [ 33.673118][ T607] [ 33.674599][ T607] CPU0 CPU1 [ 33.675557][ T607] ---- ---- [ 33.676516][ T607] lock(&net->nsid_lock); [ 33.677306][ T607] local_irq_disable(); [ 33.678517][ T607] lock(&mc->mca_lock); [ 33.679725][ T607] lock(&bridge_netdev_addr_lock_key); [ 33.681166][ T607] <Interrupt> [ 33.681791][ T607] lock(&mc->mca_lock); [ 33.682579][ T607] [ 33.682579][ T607] *** DEADLOCK *** [ ... ] [ 33.922046][ T607] stack backtrace: [ 33.922999][ T607] CPU: 3 PID: 607 Comm: ip Not tainted 5.9.0-rc1+ #665 [ 33.924099][ T607] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 33.925714][ T607] Call Trace: [ 33.926238][ T607] dump_stack+0x78/0xab [ 33.926905][ T607] check_irq_usage+0x70b/0x720 [ 33.927708][ T607] ? iterate_chain_key+0x60/0x60 [ 33.928507][ T607] ? check_path+0x22/0x40 [ 33.929201][ T607] ? check_noncircular+0xcf/0x180 [ 33.930024][ T607] ? __lock_acquire+0x1952/0x1f20 [ 33.930860][ T607] __lock_acquire+0x1952/0x1f20 [ 33.931667][ T607] lock_acquire+0xaf/0x3a0 [ 33.932366][ T607] ? peernet2id_alloc+0x3a/0x170 [ 33.933147][ T607] ? br_port_fill_attrs+0x54c/0x6b0 [bridge] [ 33.934140][ T607] ? br_port_fill_attrs+0x5de/0x6b0 [bridge] [ 33.935113][ T607] ? kvm_sched_clock_read+0x14/0x30 [ 33.935974][ T607] _raw_spin_lock+0x30/0x70 [ 33.936728][ T607] ? peernet2id_alloc+0x3a/0x170 [ 33.937523][ T607] peernet2id_alloc+0x3a/0x170 [ 33.938313][ T607] rtnl_fill_ifinfo+0xb5e/0x1400 [ 33.939091][ T607] rtmsg_ifinfo_build_skb+0x8a/0xf0 [ 33.939953][ T607] rtmsg_ifinfo_event.part.39+0x17/0x50 [ 33.940863][ T607] rtmsg_ifinfo+0x1f/0x30 [ 33.941571][ T607] __dev_notify_flags+0xa5/0xf0 [ 33.942376][ T607] ? __irq_work_queue_local+0x49/0x50 [ 33.943249][ T607] ? irq_work_queue+0x1d/0x30 [ 33.943993][ T607] ? __dev_set_promiscuity+0x7b/0x1a0 [ 33.944878][ T607] __dev_set_promiscuity+0x7b/0x1a0 [ 33.945758][ T607] dev_set_promiscuity+0x1e/0x50 [ 33.946582][ T607] br_port_set_promisc+0x1f/0x40 [bridge] [ 33.947487][ T607] br_manage_promisc+0x8b/0xe0 [bridge] [ 33.948388][ T607] __dev_set_promiscuity+0x123/0x1a0 [ 33.949244][ T607] __dev_set_rx_mode+0x68/0x90 [ 33.950021][ T607] dev_uc_add+0x50/0x60 [ 33.950720][ T607] macvlan_open+0x18e/0x1f0 [macvlan] [ 33.951601][ T607] __dev_open+0xd6/0x170 [ 33.952269][ T607] __dev_change_flags+0x181/0x1d0 [ 33.953056][ T607] rtnl_configure_link+0x2f/0xa0 [ 33.953884][ T607] __rtnl_newlink+0x6b9/0x8e0 [ 33.954665][ T607] ? __lock_acquire+0x95d/0x1f20 [ 33.955450][ T607] ? lock_acquire+0xaf/0x3a0 [ 33.956193][ T607] ? is_bpf_text_address+0x5/0xe0 [ 33.956999][ T607] rtnl_newlink+0x47/0x70 Acked-by:
Guillaume Nault <gnault@redhat.com> Fixes: 8d7e5dee ("netns: don't disable BHs when locking "nsid_lock"") Reported-by: syzbot+3f960c64a104eaa2c813@syzkaller.appspotmail.com Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Indentation and logic clearly show that this code is missing parenthesis. Fixes: 9f134573 ("ibmvnic fix NULL tx_pools and rx_tools issue at do_reset") Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning in <linux/netdevice.h>: ../include/linux/netdevice.h:2158: warning: Function parameter or member 'xdp_state' not described in 'net_device' Fixes: 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning in <linux/netdevice.h>: ../include/linux/netdevice.h:2158: warning: Function parameter or member 'proto_down_reason' not described in 'net_device' Fixes: 829eb208 ("rtnetlink: add support for protodown reason") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Two bug fixes. The first patch fixes AER recovery by reducing the time from several minutes to a more reasonable 20 - 30 seconds. The second patch fixes a possible NULL pointer crash during firmware reset. ==================== Signed-off-by: -
Vasundhara Volam authored
bnxt_fw_reset_task() which runs from a workqueue can race with bnxt_remove_one(). For example, if firmware reset and VF FLR are happening at about the same time. bnxt_remove_one() already cancels the workqueue and waits for it to finish, but we need to do this earlier before the devlink reporters are destroyed. This will guarantee that the devlink reporters will always be valid when bnxt_fw_reset_task() is still running. Fixes: b148bb23 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
When the driver goes through PCIe AER reset in error state, all firmware messages will timeout because the PCIe bus is no longer accessible. This can lead to AER reset taking many minutes to complete as each firmware command takes time to timeout. Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages when either firmware is in fatal error state or when pci_channel_offline() is true. It now takes a more reasonable 20 to 30 seconds to complete AER recovery. Fixes: b4fff207 ("bnxt_en: Do not send firmware messages if firmware is in error state.") Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch causes a regression betwen Kernel 5.7 and 5.8 at wlcore: with it applied, WiFi stops working, and the Kernel starts printing this message every second: wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 133 at drivers/net/wireless/ti/wlcore/main.c:795 wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] Modules linked in: wl18xx wlcore mac80211 libarc4 cfg80211 rfkill snd_soc_hdmi_codec crct10dif_ce wlcore_sdio adv7511 cec kirin9xx_drm(C) kirin9xx_dw_drm_dsi(C) drm_kms_helper drm ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 0 PID: 133 Comm: kworker/0:1 Tainted: G WC 5.8.0+ #186 Hardware name: HiKey970 (DT) Workqueue: events_freezable ieee80211_restart_work [mac80211] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) pc : wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] lr : wl12xx_queue_recovery_work+0x24/0x30 [wlcore] sp : ffff8000126c3a60 x29: ffff8000126c3a60 x28: 00000000000025de x27: 0000000000000010 x26: 0000000000000005 x25: ffff0001a5d49e80 x24: ffff8000092cf580 x23: ffff0001b7c12623 x22: ffff0001b6fcf2e8 x21: ffff0001b7e46200 x20: 00000000fffffffb x19: ffff0001a78e6400 x18: 0000000000000030 x17: 0000000000000001 x16: 0000000000000001 x15: ffff0001b7e46670 x14: ffffffffffffffff x13: ffff8000926c37d7 x12: ffff8000126c37e0 x11: ffff800011e01000 x10: ffff8000120526d0 x9 : 0000000000000000 x8 : 3431206572756c69 x7 : 6166206574756365 x6 : 0000000000000c2c x5 : 0000000000000000 x4 : ffff0001bf1361e8 x3 : ffff0001bf1790b0 x2 : 0000000000000000 x1 : ffff0001a5d49e80 x0 : 0000000000000001 Call trace: wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] wl12xx_queue_recovery_work+0x24/0x30 [wlcore] wl1271_cmd_set_sta_key+0x258/0x25c [wlcore] wl1271_set_key+0x7c/0x2dc [wlcore] wlcore_set_key+0xe4/0x360 [wlcore] wl18xx_set_key+0x48/0x1d0 [wl18xx] wlcore_op_set_key+0xa4/0x180 [wlcore] ieee80211_key_enable_hw_accel+0xb0/0x2d0 [mac80211] ieee80211_reenable_keys+0x70/0x110 [mac80211] ieee80211_reconfig+0xa00/0xca0 [mac80211] ieee80211_restart_work+0xc4/0xfc [mac80211] process_one_work+0x1cc/0x350 worker_thread+0x13c/0x470 kthread+0x154/0x160 ret_from_fork+0x10/0x30 ---[ end trace b1f722abf9af5919 ]--- wlcore: WARNING could not set keys wlcore: ERROR Could not add or replace key wlan0: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-5) wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.79 wlcore: pc: 0x0, hint_sts: 0x00000040 count: 39 wlcore: down wlcore: down ieee80211 phy0: Hardware restart was requested mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ Tested on Hikey 970. This reverts commit 2b7aadd3. Signed-off-by:Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org
-
- 06 Sep, 2020 2 commits
-
-
Linus Walleij authored
When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Parshuram Thombare authored
PAE bit of NCFGR register, when set, pauses transmission if a non-zero 802.3 classic pause frame is received. Fixes: 7897b071 ("net: macb: convert to phylink") Signed-off-by:
Parshuram Thombare <pthombar@cadence.com> Signed-off-by:
-
