- 24 Dec, 2019 2 commits
-
-
Chris Wilson authored
Our goal in wait_for_idle (intel_gt_retire_requests) is to the current workload *and* their idle barriers. This requires us to notice the late arrival of those, which is done by inspecting the list of active timelines. However, if a concurrent retirer is running that new timeline may not be added until after we drop the lock -- so flush concurrent retirers before we take the lock and inspect the list. Closes: https://gitlab.freedesktop.org/drm/intel/issues/878Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191223211008.2371613-1-chris@chris-wilson.co.uk
-
Pankaj Bharadiya authored
intel_bw_state allocated memory is not getting freed even after module removal. kmemleak reported backtrace: [<0000000079019739>] kmemdup+0x17/0x40 [<00000000d58c1b9d>] intel_bw_duplicate_state+0x1b/0x40 [i915] [<000000007423ed0c>] drm_atomic_get_private_obj_state+0xca/0x140 [<00000000100e3533>] intel_bw_atomic_check+0x133/0x350 [i915] [<00000000126d0e0c>] intel_atomic_check+0x1ab7/0x20d0 [i915] [<00000000d5dfc004>] drm_atomic_check_only+0x563/0x810 [<00000000c9379611>] drm_atomic_commit+0xe/0x50 [<00000000ec82b765>] drm_atomic_helper_disable_all+0x133/0x160 [<000000003c44760c>] drm_atomic_helper_shutdown+0x65/0xc0 [<00000000414e3e5c>] i915_driver_remove+0xcb/0x130 [i915] [<00000000f8544c2a>] i915_pci_remove+0x19/0x40 [i915] [<000000002dcbd148>] pci_device_remove+0x36/0xb0 [<000000003c8c6b0a>] device_release_driver_internal+0xe0/0x1c0 [<00000000580e9566>] unbind_store+0xc3/0x120 [<00000000869d0df5>] kernfs_fop_write+0x104/0x190 [<000000004dc1a355>] vfs_write+0xb9/0x1d0 Call the drm_atomic_private_obj_fini(), which inturn calls the intel_bw_destroy_state() to make sure the intel_bw_state memory is freed properly. Reviewed-by:Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191209143921.9240-1-pankaj.laxminarayan.bharadiya@intel.com
-
- 23 Dec, 2019 25 commits
-
-
Chris Wilson authored
Use the status of the timeline request list as we retire it to determine if the timeline is still active. Signed-off-by:
-
José Roberto de Souza authored
This function is only called from port sync and it is identical to what will be executed again in intel_update_crtc() over port sync pipes. If it is really necessary at least it deserves a better name and a comment, leaving it to people working on port sync. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191223010654.67037-7-jose.souza@intel.com
-
José Roberto de Souza authored
MST master can not be disabled while it have attached MST slaves, so it is necessary force a modeset in all of its slaves. v3: - moved handling to intel_atomic_check() this way is guarantee that all pipes will have its state computed v4: - added a function to return if MST master neeeds modeset to simply code in intel_atomic_check() v5: - fixed and moved code to check if MST master needs a modeset v6: - previons version of this patch was split into two patches Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
MST and port sync have master and slaves pipes and it brings dependencies between pipes to allow fastset. For example if only MST master needs a modeset all of its slaves also needs to do a modeset. This patch adds the base for external dependencies check, the MST and port sync bits will be added in another patches. v3: - moved handling to intel_atomic_check() this way is guarantee that all pipes will have its state computed v4: - added a function to return if MST master neeeds modeset to simply code in intel_atomic_check() v5: - fixed and moved code to check if MST master needs a modeset v6: - previons version of this patch was split into two patches Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
José Roberto de Souza authored
The disable sequence after wait for transcoder off was not correctly implemented. The MST disable sequence is basically the same for HSW, SKL, ICL and TGL, with just minor changes for TGL. With this last patch we finally fixed the hotplugs triggered by MST sinks during the disable/enable sequence, those were causing source to try to do a link training while it was not ready causing CPU pipe FIFO underrrus on TGL. v2: Only unsetting TGL_TRANS_DDI_PORT_MASK for TGL on the post disable sequence v4: Rebased, moved MST sequences to intel_mst_post_disable_dp() BSpec: 4231 BSpec: 4163 BSpec: 22243 BSpec: 49190 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Due to DDB overlaps the pipe enabling sequence is not always crescent. As the previous patch selects the smallest pipe/transcoder in the MST stream to be master and it needs to be enabled first, this changes were needed to guarantee that. So first lets enable all pipes that do not need a fullmodeset as those don't have any external dependency and those are the ones that can overlap with each other. Then on the second loop it will enable all the pipes that needs a modeset and don't depends on other pipes like MST master pipe/transcoder. Then finally all the pipes that needs a modeset and have dependency on other pipes, that at this point are alread enabled. v3: rebased v4: - added check for modeset_pipes too to decide if is necessary for a wait a vblank - added DDB allocation overlap check for pipes that needs a modeset Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
José Roberto de Souza authored
On TGL the blending of all the streams have moved from DDI to transcoder, so now every transcoder working over the same MST port must send its stream to a master transcoder and master will send to DDI respecting the time slots. So here adding all the CRTCs that shares the same MST stream if needed and computing their state again, it will pick the lowest pipe/transcoder among the ones in the same stream to be master. Most of the time skl_commit_modeset_enables() enables pipes in a crescent order but due DDB overlapping it might not happen, this scenarios will be handled in the next patch. v2: - Using recently added intel_crtc_state_reset() to set mst_master_transcoder to invalid transcoder for all non gen12 & MST code paths - Setting lowest pipe/transcoder as master, previously it was the first one but setting a predictable one will help in future MST e port sync integration - Moving to intel type as much as we can v3: - Now intel_dp_mst_master_trans_compute() returns the MST master transcoder - Replaced stdbool.h by linux/types.h - Skip the connector being checked in intel_dp_mst_atomic_master_trans_check() - Using pipe instead of transcoder to compute MST master v4: - renamed connector_state to conn_state v5: - Improved the parameters of intel_dp_mst_master_trans_compute() to simply code - Added call drm_atomic_add_affected_planes() in intel_dp_mst_atomic_master_trans_check() as helper could not do it for us - Removed "if (ret)" left over from v3 changes v6: - handled ret == I915_MAX_PIPES case in compute BSpec: 50493 BSpec: 49190 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
intel_connector_needs_modeset() will be used outside of intel_display.c in a future patch so it would only be necessary to remove the state and add the prototype to the header file. But while at it, I simplified the arguments and moved it to a better place intel_atomic.c. No behavior changes intended here. v3: - removed digital from exported version of intel_connector_needs_modeset - rollback connector to drm type v4: - Renamed new_connector_state to new_conn_state - Going back to drm_connector_state in intel_encoders_update_prepare/complete as we also have intel_tv_connector_state Reviewed-by:
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
The only protection for intel_context.gem_cotext is granted by RCU, so annotate it as a rcu protected pointer and carefully dereference it in the few occasions we need to use it. Fixes: 9f3ccd40 ("drm/i915: Drop GEM context as a direct link from i915_request") Signed-off-by:
-
Chris Wilson authored
Start introducing a kref on i915_vma in order to protect the vma unbind (i915_gem_object_unbind) from a parallel destruction (i915_vma_parked). Later, we will use the refcount to manage all access and turn i915_vma into a first class container. Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191222210256.2066451-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Only acquire the various atomic references required to unbind the vma if we do need to unbind the vma. Signed-off-by:
-
Imre Deak authored
For CCS formats, the current DRM core check for YUV semiplanar formats doesn't work; use an i915 specific function for that. v2: Fix checkpatch warnings. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-11-imre.deak@intel.com
-
Imre Deak authored
Y planes program the offset and stride of the AUX plane, so make sure we copy the required info for this into their plane state. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
During framebuffer creation, we pre-compute offsets for 90/270 plane rotation. However, only Y and Yf modifiers support 90/270 rotation. So, skip the calculations for other modifiers. To keep the gem buffer size check still working for tiled planes, factor out the logic needed for rotation setup and skip only this part for tiled planes other than Y/Yf. v2: Add a bounds check WARN for the rotation info array. v3: Keep the gem buffer size check working for tiled planes. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Imre Deak authored
The CCS plane stride must be fixed on TGL, as it's not configurable for the display. Instead the HW has a hardwired logic to determine it from the main plane stride. Make sure userspace passes in the correct stride. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
Gen-12 display decompression operates on Y-tiled compressed main surface. The CCS is linear and has 4 bits of metadata for each main surface cache line pair, a size ratio of 1:256. Gen-12 display decompression is incompatible with buffers compressed by earlier GPUs, so make use of a new modifier to identify gen-12 compression. Another notable change is that render decompression is supported on all planes except cursor and on all pipes. Start by adding render decompression support for [A,X]BGR888 pixel formats. v2: Fix checkpatch warnings (Lucas) v3: Rebase, disable color clear, styling changes and modify intel_tile_width_bytes and intel_tile_height to handle linear CCS v4: - Use format block descriptors and the i915 specific func to get the subsampling for each color plane. - Use helpers to convert between CCS and main planes. v5: - Fix subsampling returned by intel_fb_plane_get_subsampling() for the CCS plane of the first plane. v6: - Rebased on v2 of patch 4. v7: - Fix plane dimensions during FB check. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Nanley G Chery <nanley.g.chery@intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
Gen-12 has a new compression format, add a new modifier to indicate that. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Nanley G Chery <nanley.g.chery@intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Mika Kahola <mika.kahola@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Imre Deak authored
Using helpers instead of open coding this to select a CCS plane for a main plane makes the code cleaner and less error-prone when the location of CCS plane can be different based on the format (packed vs. YUV semiplanar). The same applies to selecting an AUX plane which can be a UV plane (for an uncompressed YUV semiplanar format), or a CCS plane. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191221120543.22816-5-imre.deak@intel.com
-
Dhinakaran Pandiyan authored
intel_fill_fb_info() has grown quite large and wrapping the offset checks into a separate function makes the loop a bit easier to follow. v2: Skip the check for non-CCS planes. (Mika) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
Easier to read if all the alignment changes are in one place and contained within a function. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
intel_tile_dims() computes tile height using size and width, when there is already a function to do just that - intel_tile_height() Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Jani Nikula authored
Needs i915_drv.h because i915 gets dereferenced. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
-
Jani Nikula authored
Fix the forward declaration. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
-
Jani Nikula authored
The power domain covers VDSC for DSI transcoder on ICL, and it's pedantically about pipe, not transcoder, on TGL. Reported-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by:
-
- 22 Dec, 2019 4 commits
-
-
Andi Shyti authored
The GT system is becoming more and more a stand-alone system in i915 and it's fair to assign it its own debugfs directory. rc6, rps and llc debugfs files are gt related, move them into the gt debugfs directory. Signed-off-by:
-
Chris Wilson authored
Now that we don't need to create GEM contexts in the middle of engine construction, we can pull the engine init/setup loops together. Signed-off-by:
-
Chris Wilson authored
Since intel_gt_resume() is always immediately proceeded by init_hw, pull the call into intel_gt_resume, where we have the rpm and fw already held. Signed-off-by:
-
Chris Wilson authored
Begin pulling the GT setup underneath a single GT umbrella; let intel_gt take ownership of its engines! As hinted, the complication is the lifetime of the probed engine versus the active lifetime of the GT backends. We need to detect the engine layout early and keep it until the end so that we can sanitize state on takeover and release. Signed-off-by:
-
- 21 Dec, 2019 4 commits
-
-
Chris Wilson authored
As the GEM global context setup is now independent of the GT state (although GT does currently still depend upon the global i915->kernel_context), we can move its init earlier, leaving the gt init ready to be extracted. Signed-off-by:
-
Chris Wilson authored
Since we may retire timelines from secondary workers, intel_gt_retire_requests() is not always a reliable indicator that all pending retirements are complete. If we do detect secondary workers are in progress, recommend intel_gt_wait_for_idle() to repeat the retirement check. Signed-off-by:
-
Chris Wilson authored
Allocate only an internal intel_context for the kernel_context, forgoing a global GEM context for internal use as we only require a separate address space (for our own protection). Now having weaned GT from requiring ce->gem_context, we can stop referencing it entirely. This also means we no longer have to create random and unnecessary GEM contexts for internal use. GEM contexts are now entirely for tracking GEM clients, and intel_context the execution environment on the GPU. Signed-off-by:
-
Chris Wilson authored
Enable and cleanup the engine->retire for the mock engine. Fixes: dc93c9b6 ("drm/i915/gt: Schedule request retirement when signaler idles") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191221001136.720154-1-chris@chris-wilson.co.uk
-
- 20 Dec, 2019 5 commits
-
-
Ville Syrjälä authored
We have several places where we want to allocate a pristine crtc state. Some of those currently call intel_crtc_state_reset() to properly initialize all the non-zero defaults in the state, but some places do not. Let's add intel_crtc_state_alloc() to do both the alloc and the reset, and call that everywhere we need a fresh crtc state. v2: s/kzalloc/kmalloc/ since we memset() anyway (José) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Chris Wilson authored
Decide whether or not we need to disable arbitration within user batches based on our intel_engine_has_preemption() flag. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191213151331.1788371-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Instead of rummaging through the intel_context to peek at the GEM context in the middle of request submission to decide whether to use semaphores, store that information on the intel_context itself. Signed-off-by:
-
Chris Wilson authored
Keep the intel_context as being the primary state for i915_request, with the GEM context a backpointer from the low level state for the rarer cases we need client information. Our goal is to remove such references to clients from the backend, and leave the HW submission agnostic to client interfaces and self-contained. Signed-off-by:
-
Chris Wilson authored
Since we added the context_alloc callback to intel_context_ops, we can safely install a custom hook for the deferred virtual context allocation. This means that all new contexts behave the same upon creation, simplifying later code. Signed-off-by:
-
