Skip to content

L
linux
Switch branch/tag
  1. 14 Mar, 2020 8 commits
    • Linus Torvalds's avatar
      Merge tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc · 3086ae07
      Linus Torvalds authored 
      Pull ARC fixes from Vineet Gupta:

 - Fix __ALIGN_STR and __ALIGN to not use default junk padding

 - Misc Kconfig cleanups, header updates

* tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: define __ALIGN_STR and __ALIGN symbols for ARC
  ARC: show_regs: reduce lines of output
  ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  ARC: fpu: fix randconfig build error reported by 0-day test service
  ARC: fix some Kconfig typos
  ARC: Cleanup old Kconfig IO scheduler options
      3086ae07
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 6693075e
      Linus Torvalds authored 
      Pull kvm fixes from Paolo Bonzini:
 "Bugfixes for x86 and s390"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs
  KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect
  KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1
  KVM: s390: Also reset registers in sync regs for initial cpu reset
  KVM: fix Kconfig menu text for -Werror
  KVM: x86: remove stale comment from struct x86_emulate_ctxt
  KVM: x86: clear stale x86_emulate_ctxt->intercept value
  KVM: SVM: Fix the svm vmexit code for WRMSR
  KVM: X86: Fix dereference null cpufreq policy
      6693075e
    • Linus Torvalds's avatar
      Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux · 69a4d0ba
      Linus Torvalds authored 
      Pull clk fixes from Stephen Boyd:
 "A small collection of fixes. I'll make another sweep soon to look for
  more fixes for this -rc series.

   - Mark device node const in of_clk_get_parent APIs to ease landing
     changes in users later

   - Fix flag for Qualcomm SC7180 video clocks where we thought it would
     never turn off but actually hardware takes care of it

   - Remove disp_cc_mdss_rscc_ahb_clk on Qualcomm SC7180 SoCs because
     this clk is always on anyway

   - Correct some bad dt-binding numbers for i.MX8MN SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx8mn: Fix incorrect clock defines
  clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk
  clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk
  of: clk: Make of_clk_get_parent_{count,name}() parameter const
      69a4d0ba
    • Paolo Bonzini's avatar
      Merge branch 'kvm-null-pointer-fix' into kvm-master · 018cabb6
      Paolo Bonzini authored
      018cabb6
    • Vitaly Kuznetsov's avatar
      KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs · 95fa1010
      Vitaly Kuznetsov authored 
      When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter
with EVMCS GPA = 0 the host crashes because the

evmcs_gpa != vmx->nested.hv_evmcs_vmptr

condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to
false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will
happen on vmx->nested.hv_evmcs pointer dereference.

Another problematic EVMCS ptr value is '-1' but it only causes host crash
after nested_release_evmcs() invocation. The problem is exactly the same as
with '0', we mistakenly think that the EVMCS pointer hasn't changed and
thus nested.hv_evmcs_vmptr is valid.

Resolve the issue by adding an additional !vmx->nested.hv_evmcs
check to nested_vmx_handle_enlightened_vmptrld(), this way we will
always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL
and this is supposed to catch all invalid EVMCS GPAs.

Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs()
to be consistent with initialization where we don't currently
set hv_evmcs_vmptr to '-1'.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      95fa1010
    • Paolo Bonzini's avatar
      Merge tag 'kvm-s390-master-5.6-1' of... · 997224fe
      Paolo Bonzini authored 
      Merge tag 'kvm-s390-master-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fully do the CPU resets as intended

With 7de3f142 ("KVM: s390: Add new reset vcpu API") we clarified
the meaning of the reset ioctl to fully reset the CPU and not only the
parts that can not be handled by userspace. Turns out that we missed
some parts.
      997224fe
    • Nitesh Narayan Lal's avatar
      KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect · 0c22056f
      Nitesh Narayan Lal authored 
      Previously all fields of structure kvm_lapic_irq were not initialized
before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause
an issue when any of those fields are used for processing a request.
For example not initializing the msi_redir_hint field before passing
to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of
kvm_apic_map_get_dest_lapic(). This will specifically happen when the
kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage
value of msi_redir_hint, which should not happen as the request belongs
to APIC fixed delivery mode and we do not want to deliver the
interrupt only to the lowest priority candidate.

This patch initializes all the fields of kvm_lapic_irq based on the
values of ioapic redirect_entry object before passing it on to
kvm_bitmap_or_dest_vcpus().

Fixes: 7ee30bc1 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs")
Signed-off-by: default avatarNitesh Narayan Lal <nitesh@redhat.com>
Reviewed-by: default avatarVitaly Kuznetsov <vkuznets@redhat.com>
[Set level to false since the value doesn't really matter. Suggested
 by Vitaly Kuznetsov. - Paolo]
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      0c22056f
    • Sean Christopherson's avatar
      KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1 · 7a57c09b
      Sean Christopherson authored 
      Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if
the CPU supports SGX1.  Per Intel's SDM, all ENCLS leafs #UD if SGX1
is not supported[*], i.e. intercepting ENCLS to inject a #UD is
unnecessary.

Avoiding ENCLS-exiting even when it is reported as supported by the CPU
works around a reported issue where SGX is "hard" disabled after an S3
suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control
are enumerated as unsupported.  While the root cause of the S3 issue is
unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a
workaround for what is most likely a hardware or firmware issue.  As a
bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and
vmcs02.

Note, SGX must be disabled in BIOS to take advantage of this workaround

[*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be
    globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are
    cleared.  Soft disabled meaning disabling SGX without clearing the
    primary CPUID bit (in leaf 0x7) and without poking into non-SGX
    CPU paths, e.g. for the VMCS controls.

Fixes: 0b665d30 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest")
Reported-by: default avatarToni Spets <toni.spets@iki.fi>
Signed-off-by: default avatarSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      7a57c09b
  3. 13 Mar, 2020 13 commits
  5. 12 Mar, 2020 19 commits
    • Dave Airlie's avatar
      Merge tag 'drm-intel-fixes-2020-03-12' of... · f31d83f0
      Dave Airlie authored 
      Merge tag 'drm-intel-fixes-2020-03-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.6-rc6:
- hard lockup fix
- GVT fixes
- 32-bit alignment issue fix
- timeline wait fixes
- cacheline_retire and free
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfo6ksvw.fsf@intel.com
      f31d83f0
    • Dave Airlie's avatar
      Merge tag 'amd-drm-fixes-5.6-2020-03-11' of... · d9443265
      Dave Airlie authored 
      Merge tag 'amd-drm-fixes-5.6-2020-03-11' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.6-2020-03-11:

amdgpu:
- Update the display watermark bounding box for navi14
- Fix fetching vbios directly from rom on vega20/arcturus
- Navi and renoir watermark fixes
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312020924.4161-1-alexander.deucher@amd.com
      d9443265
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 1b51f694
      Linus Torvalds authored 
      Pull networking fixes from David Miller:
 "It looks like a decent sized set of fixes, but a lot of these are one
  liner off-by-one and similar type changes:

   1) Fix netlink header pointer to calcular bad attribute offset
      reported to user. From Pablo Neira Ayuso.

   2) Don't double clear PHY interrupts when ->did_interrupt is set,
      from Heiner Kallweit.

   3) Add missing validation of various (devlink, nl802154, fib, etc.)
      attributes, from Jakub Kicinski.

   4) Missing *pos increments in various netfilter seq_next ops, from
      Vasily Averin.

   5) Missing break in of_mdiobus_register() loop, from Dajun Jin.

   6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.

   7) Work around FMAN erratum A050385, from Madalin Bucur.

   8) Make sure ARP header is pulled early enough in bonding driver,
      from Eric Dumazet.

   9) Do a cond_resched() during multicast processing of ipvlan and
      macvlan, from Mahesh Bandewar.

  10) Don't attach cgroups to unrelated sockets when in interrupt
      context, from Shakeel Butt.

  11) Fix tpacket ring state management when encountering unknown GSO
      types. From Willem de Bruijn.

  12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
      only in the suspend context. From Heiner Kallweit"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
  net: systemport: fix index check to avoid an array out of bounds access
  tc-testing: add ETS scheduler to tdc build configuration
  net: phy: fix MDIO bus PM PHY resuming
  net: hns3: clear port base VLAN when unload PF
  net: hns3: fix RMW issue for VLAN filter switch
  net: hns3: fix VF VLAN table entries inconsistent issue
  net: hns3: fix "tc qdisc del" failed issue
  taprio: Fix sending packets without dequeueing them
  net: mvmdio: avoid error message for optional IRQ
  net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
  net: memcg: fix lockdep splat in inet_csk_accept()
  s390/qeth: implement smarter resizing of the RX buffer pool
  s390/qeth: refactor buffer pool code
  s390/qeth: use page pointers to manage RX buffer pool
  seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
  net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
  net/packet: tpacket_rcv: do not increment ring index on drop
  sxgbe: Fix off by one in samsung driver strncpy size arg
  net: caif: Add lockdep expression to RCU traversal primitive
  MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
  ...
      1b51f694
    • Lyude Paul's avatar
      drm/dp_mst: Rewrite and fix bandwidth limit checks · 047d4cd2
      Lyude Paul authored 
      Sigh, this is mostly my fault for not giving commit cd82d82c
("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
enough scrutiny during review. The way we're checking bandwidth
limitations here is mostly wrong:

For starters, drm_dp_mst_atomic_check_bw_limit() determines the
pbn_limit of a branch by simply scanning each port on the current branch
device, then uses the last non-zero full_pbn value that it finds. It
then counts the sum of the PBN used on each branch device for that
level, and compares against the full_pbn value it found before.

This is wrong because ports can and will have different PBN limitations
on many hubs, especially since a number of DisplayPort hubs out there
will be clever and only use the smallest link rate required for each
downstream sink - potentially giving every port a different full_pbn
value depending on what link rate it's trained at. This means with our
current code, which max PBN value we end up with is not well defined.

Additionally, we also need to remember when checking bandwidth
limitations that the top-most device in any MST topology is a branch
device, not a port. This means that the first level of a topology
doesn't technically have a full_pbn value that needs to be checked.
Instead, we should assume that so long as our VCPI allocations fit we're
within the bandwidth limitations of the primary MSTB.

We do however, want to check full_pbn on every port including those of
the primary MSTB. However, it's important to keep in mind that this
value represents the minimum link rate /between a port's sink or mstb,
and the mstb itself/. A quick diagram to explain:

                                MSTB #1
                               /       \
                              /         \
                           Port #1    Port #2
       full_pbn for Port #1 → |          | ← full_pbn for Port #2
                           Sink #1    MSTB #2
                                         |
                                       etc...

Note that in the above diagram, the combined PBN from all VCPI
allocations on said hub should not exceed the full_pbn value of port #2,
and the display configuration on sink #1 should not exceed the full_pbn
value of port #1. However, port #1 and port #2 can otherwise consume as
much bandwidth as they want so long as their VCPI allocations still fit.

And finally - our current bandwidth checking code also makes the mistake
of not checking whether something is an end device or not before trying
to traverse down it.

So, let's fix it by rewriting our bandwidth checking helpers. We split
the function into one part for handling branches which simply adds up
the total PBN on each branch and returns it, and one for checking each
port to ensure we're not going over its PBN limit. Phew.

This should fix regressions seen, where we erroneously reject display
configurations due to thinking they're going over our bandwidth limits
when they're not.

Changes since v1:
* Took an even closer look at how PBN limitations are supposed to be
  handled, and did some experimenting with Sean Paul. Ended up rewriting
  these helpers again, but this time they should actually be correct!
Changes since v2:
* Small indenting fix
* Fix pbn_used check in drm_dp_mst_atomic_check_port_bw_limit()
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Fixes: cd82d82c ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Sean Paul <seanpaul@google.com>
Acked-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: default avatarMikita Lipski <mikita.lipski@amd.com>
Tested-by: default avatarHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309210131.1497545-1-lyude@redhat.com
      047d4cd2
    • Lyude Paul's avatar
      drm/dp_mst: Reprobe path resources in CSN handler · 87212b51
      Lyude Paul authored 
      We used to punt off reprobing path resources to the link address probe
work, but now that we handle CSNs asynchronously from the driver's HPD
handling we can do whatever the heck we want from the CSN!

So, reprobe the path resources from drm_dp_mst_handle_conn_stat(). Also,
get rid of the path resource reprobing code in
drm_dp_check_and_send_link_address() since it's needlessly complicated
when we already reprobe path resources from
drm_dp_handle_link_address_port(). And finally, teach
drm_dp_send_enum_path_resources() to return 1 on PBN changes so we know
if we need to send another hotplug or not.

This fixes issues where we've indicated to userspace that a port has
just been connected, before we actually probed it's available PBN -
something that results in unexpected atomic check failures.
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Fixes: cd82d82c ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-4-lyude@redhat.comReviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Tested-by: default avatarHans de Goede <hdegoede@redhat.com>
      87212b51
    • Lyude Paul's avatar
      drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks · fcf46380
      Lyude Paul authored 
      DisplayPort specifications are fun. For a while, it's been really
unclear to us what available_pbn actually does. There's a somewhat vague
explanation in the DisplayPort spec (starting from 1.2) that partially
explains it:

  The minimum payload bandwidth number supported by the path. Each node
  updates this number with its available payload bandwidth number if its
  payload bandwidth number is less than that in the Message Transaction
  reply.

So, it sounds like available_pbn represents the smallest link rate in
use between the source and the branch device. Cool, so full_pbn is just
the highest possible PBN that the branch device supports right?

Well, we assumed that for quite a while until Sean Paul noticed that on
some MST hubs, available_pbn will actually get set to 0 whenever there's
any active payloads on the respective branch device. This caused quite a
bit of confusion since clearing the payload ID table would end up fixing
the available_pbn value.

So, we just went with that until commit cd82d82c ("drm/dp_mst: Add
branch bandwidth validation to MST atomic check") started breaking
people's setups due to us getting erroneous available_pbn values. So, we
did some more digging and got confused until we finally looked at the
definition for full_pbn:

  The bandwidth of the link at the trained link rate and lane count
  between the DP Source device and the DP Sink device with no time slots
  allocated to VC Payloads, represented as a Payload Bandwidth Number. As
  with the Available_Payload_Bandwidth_Number, this number is determined
  by the link with the lowest lane count and link rate.

That's what we get for not reading specs closely enough, hehe. So, since
full_pbn is definitely what we want for doing bandwidth restriction
checks - let's start using that instead and ignore available_pbn
entirely.
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Fixes: cd82d82c ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: default avatarMikita Lipski <mikita.lipski@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-3-lyude@redhat.comReviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Tested-by: default avatarHans de Goede <hdegoede@redhat.com>
      fcf46380
    • Lyude Paul's avatar
      drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant · b2feb1d6
      Lyude Paul authored 
      It's already prefixed by dp_mst, so we don't really need to repeat
ourselves here. One of the changes I should have picked up originally
when reviewing MST DSC support.

There should be no functional changes here

Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Sean Paul <seanpaul@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Tested-by: default avatarHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-2-lyude@redhat.com
      b2feb1d6
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 807f030b
      Linus Torvalds authored 
      Pull vfs fixes from Al Viro:
 "A couple of fixes for old crap in ->atomic_open() instances"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cifs_atomic_open(): fix double-put on late allocation failure
  gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache
      807f030b
    • Colin Ian King's avatar
      net: systemport: fix index check to avoid an array out of bounds access · c0368595
      Colin Ian King authored 
      Currently the bounds check on index is off by one and can lead to
an out of bounds access on array priv->filters_loc when index is
RXCHK_BRCM_TAG_MAX.

Fixes: bb9051a2 ("net: systemport: Add support for WAKE_FILTER")
Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c0368595
    • Davide Caratti's avatar
      tc-testing: add ETS scheduler to tdc build configuration · 9d0e0cd9
      Davide Caratti authored 
      add CONFIG_NET_SCH_ETS to 'config', otherwise test suites using this file
to perform a full tdc run will encounter the following warning:

  ok 645 e90e - Add ETS qdisc using bands # skipped - "-----> teardown stage" did not complete successfully

Fixes: 82c664b6 ("selftests: qdiscs: Add test coverage for ETS Qdisc")
Reported-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9d0e0cd9
    • Heiner Kallweit's avatar
      net: phy: fix MDIO bus PM PHY resuming · 611d779a
      Heiner Kallweit authored 
      So far we have the unfortunate situation that mdio_bus_phy_may_suspend()
is called in suspend AND resume path, assuming that function result is
the same. After the original change this is no longer the case,
resulting in broken resume as reported by Geert.

To fix this call mdio_bus_phy_may_suspend() in the suspend path only,
and let the phy_device store the info whether it was suspended by
MDIO bus PM.

Fixes: 503ba7c6 ("net: phy: Avoid multiple suspends")
Reported-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Tested-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      611d779a
    • Al Viro's avatar
      cifs_atomic_open(): fix double-put on late allocation failure · d9a9f484
      Al Viro authored 
      several iterations of ->atomic_open() calling conventions ago, we
used to need fput() if ->atomic_open() failed at some point after
successful finish_open().  Now (since 2016) it's not needed -
struct file carries enough state to make fput() work regardless
of the point in struct file lifecycle and discarding it on
failure exits in open() got unified.  Unfortunately, I'd missed
the fact that we had an instance of ->atomic_open() (cifs one)
that used to need that fput(), as well as the stale comment in
finish_open() demanding such late failure handling.  Trivially
fixed...

Fixes: fe9ec829 "do_last(): take fput() on error after opening to out:"
Cc: stable@kernel.org # v4.7+
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      d9a9f484
    • Al Viro's avatar
      gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache · 21039132
      Al Viro authored 
      with the way fs/namei.c:do_last() had been done, ->atomic_open()
instances needed to recognize the case when existing file got
found with O_EXCL|O_CREAT, either by falling back to finish_no_open()
or failing themselves.  gfs2 one didn't.

Fixes: 6d4ade98 (GFS2: Add atomic_open support)
Cc: stable@kernel.org # v3.11
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      21039132
    • David S. Miller's avatar
      Merge branch 'hns3-fixes' · e4792ffe
      David S. Miller authored 
      Huazhong Tan says:

====================
net: hns3: fixes for -net

This series includes several bugfixes for the HNS3 ethernet driver.

[patch 1] fixes an "tc qdisc del" failure.
[patch 2] fixes SW & HW VLAN table not consistent issue.
[patch 3] fixes a RMW issue related to VLAN filter switch.
[patch 4] clears port based VLAN when uploading PF.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4792ffe
    • Jian Shen's avatar
      net: hns3: clear port base VLAN when unload PF · 59359fc8
      Jian Shen authored 
      Currently, PF missed to clear the port base VLAN for VF when
unload. In this case, the VLAN id will remain in the VLAN
table. This patch fixes it.

Fixes: 92f11ea1 ("net: hns3: fix set port based VLAN issue for VF")
Signed-off-by: default avatarJian Shen <shenjian15@huawei.com>
Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      59359fc8
    • Jian Shen's avatar
      net: hns3: fix RMW issue for VLAN filter switch · 903b85d3
      Jian Shen authored 
      According to the user manual, the ingress and egress VLAN filter
are configured at the same time. Currently, hclge_init_vlan_config()
and hclge_set_vlan_spoofchk() will both change the VLAN filter
switch. So it's necessary to read the old configuration before
modifying it.

Fixes: 22044f95 ("net: hns3: add support for spoof check setting")
Signed-off-by: default avatarJian Shen <shenjian15@huawei.com>
Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      903b85d3
    • Jian Shen's avatar
      net: hns3: fix VF VLAN table entries inconsistent issue · 23b4201d
      Jian Shen authored 
      Currently, if VF is loaded on the host side, the host doesn't
clear the VF's VLAN table entries when VF removing. In this
case, when doing reset and disabling sriov at the same time the
VLAN device over VF will be removed, but the VLAN table entries
in hardware are remained.

This patch fixes it by asking PF to clear the VLAN table entries for
VF when VF is removing. It also clears the VLAN table full bit
after VF VLAN table entries being cleared.

Fixes: c6075b19 ("net: hns3: Record VF vlan tables")
Signed-off-by: default avatarJian Shen <shenjian15@huawei.com>
Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      23b4201d
    • Yonglong Liu's avatar
      net: hns3: fix "tc qdisc del" failed issue · 5eb01ddf
      Yonglong Liu authored 
      The HNS3 driver supports to configure TC numbers and TC to priority
map via "tc" tool. But when delete the rule, will fail, because
the HNS3 driver needs at least one TC, but the "tc" tool sets TC
number to zero when delete.

This patch makes sure that the TC number is at least one.

Fixes: 30d240df ("net: hns3: Add mqprio hardware offload support in hns3 driver")
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5eb01ddf
    • Vinicius Costa Gomes's avatar
      taprio: Fix sending packets without dequeueing them · b09fe70e
      Vinicius Costa Gomes authored 
      There was a bug that was causing packets to be sent to the driver
without first calling dequeue() on the "child" qdisc. And the KASAN
report below shows that sending a packet without calling dequeue()
leads to bad results.

The problem is that when checking the last qdisc "child" we do not set
the returned skb to NULL, which can cause it to be sent to the driver,
and so after the skb is sent, it may be freed, and in some situations a
reference to it may still be in the child qdisc, because it was never
dequeued.

The crash log looks like this:

[   19.937538] ==================================================================
[   19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780
[   19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0
[   19.939612]
[   19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97
[   19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4
[   19.941523] Call Trace:
[   19.941774]  <IRQ>
[   19.941985]  dump_stack+0x97/0xe0
[   19.942323]  print_address_description.constprop.0+0x3b/0x60
[   19.942884]  ? taprio_dequeue_soft+0x620/0x780
[   19.943325]  ? taprio_dequeue_soft+0x620/0x780
[   19.943767]  __kasan_report.cold+0x1a/0x32
[   19.944173]  ? taprio_dequeue_soft+0x620/0x780
[   19.944612]  kasan_report+0xe/0x20
[   19.944954]  taprio_dequeue_soft+0x620/0x780
[   19.945380]  __qdisc_run+0x164/0x18d0
[   19.945749]  net_tx_action+0x2c4/0x730
[   19.946124]  __do_softirq+0x268/0x7bc
[   19.946491]  irq_exit+0x17d/0x1b0
[   19.946824]  smp_apic_timer_interrupt+0xeb/0x380
[   19.947280]  apic_timer_interrupt+0xf/0x20
[   19.947687]  </IRQ>
[   19.947912] RIP: 0010:default_idle+0x2d/0x2d0
[   19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3
[   19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
[   19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e
[   19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f
[   19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1
[   19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001
[   19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
[   19.954408]  ? default_idle_call+0x2e/0x70
[   19.954816]  ? default_idle+0x1f/0x2d0
[   19.955192]  default_idle_call+0x5e/0x70
[   19.955584]  do_idle+0x3d4/0x500
[   19.955909]  ? arch_cpu_idle_exit+0x40/0x40
[   19.956325]  ? _raw_spin_unlock_irqrestore+0x23/0x30
[   19.956829]  ? trace_hardirqs_on+0x30/0x160
[   19.957242]  cpu_startup_entry+0x19/0x20
[   19.957633]  start_secondary+0x2a6/0x380
[   19.958026]  ? set_cpu_sibling_map+0x18b0/0x18b0
[   19.958486]  secondary_startup_64+0xa4/0xb0
[   19.958921]
[   19.959078] Allocated by task 33:
[   19.959412]  save_stack+0x1b/0x80
[   19.959747]  __kasan_kmalloc.constprop.0+0xc2/0xd0
[   19.960222]  kmem_cache_alloc+0xe4/0x230
[   19.960617]  __alloc_skb+0x91/0x510
[   19.960967]  ndisc_alloc_skb+0x133/0x330
[   19.961358]  ndisc_send_ns+0x134/0x810
[   19.961735]  addrconf_dad_work+0xad5/0xf80
[   19.962144]  process_one_work+0x78e/0x13a0
[   19.962551]  worker_thread+0x8f/0xfa0
[   19.962919]  kthread+0x2ba/0x3b0
[   19.963242]  ret_from_fork+0x3a/0x50
[   19.963596]
[   19.963753] Freed by task 33:
[   19.964055]  save_stack+0x1b/0x80
[   19.964386]  __kasan_slab_free+0x12f/0x180
[   19.964830]  kmem_cache_free+0x80/0x290
[   19.965231]  ip6_mc_input+0x38a/0x4d0
[   19.965617]  ipv6_rcv+0x1a4/0x1d0
[   19.965948]  __netif_receive_skb_one_core+0xf2/0x180
[   19.966437]  netif_receive_skb+0x8c/0x3c0
[   19.966846]  br_handle_frame_finish+0x779/0x1310
[   19.967302]  br_handle_frame+0x42a/0x830
[   19.967694]  __netif_receive_skb_core+0xf0e/0x2a90
[   19.968167]  __netif_receive_skb_one_core+0x96/0x180
[   19.968658]  process_backlog+0x198/0x650
[   19.969047]  net_rx_action+0x2fa/0xaa0
[   19.969420]  __do_softirq+0x268/0x7bc
[   19.969785]
[   19.969940] The buggy address belongs to the object at ffff888112862840
[   19.969940]  which belongs to the cache skbuff_head_cache of size 224
[   19.971202] The buggy address is located 140 bytes inside of
[   19.971202]  224-byte region [ffff888112862840, ffff888112862920)
[   19.972344] The buggy address belongs to the page:
[   19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0
[   19.973930] flags: 0x8000000000010200(slab|head)
[   19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0
[   19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000
[   19.975915] page dumped because: kasan: bad access detected
[   19.976461] page_owner tracks the page as allocated
[   19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO)
[   19.978332]  prep_new_page+0x24b/0x330
[   19.978707]  get_page_from_freelist+0x2057/0x2c90
[   19.979170]  __alloc_pages_nodemask+0x218/0x590
[   19.979619]  new_slab+0x9d/0x300
[   19.979948]  ___slab_alloc.constprop.0+0x2f9/0x6f0
[   19.980421]  __slab_alloc.constprop.0+0x30/0x60
[   19.980870]  kmem_cache_alloc+0x201/0x230
[   19.981269]  __alloc_skb+0x91/0x510
[   19.981620]  alloc_skb_with_frags+0x78/0x4a0
[   19.982043]  sock_alloc_send_pskb+0x5eb/0x750
[   19.982476]  unix_stream_sendmsg+0x399/0x7f0
[   19.982904]  sock_sendmsg+0xe2/0x110
[   19.983262]  ____sys_sendmsg+0x4de/0x6d0
[   19.983660]  ___sys_sendmsg+0xe4/0x160
[   19.984032]  __sys_sendmsg+0xab/0x130
[   19.984396]  do_syscall_64+0xe7/0xae0
[   19.984761] page last free stack trace:
[   19.985142]  __free_pages_ok+0x432/0xbc0
[   19.985533]  qlist_free_all+0x56/0xc0
[   19.985907]  quarantine_reduce+0x149/0x170
[   19.986315]  __kasan_kmalloc.constprop.0+0x9e/0xd0
[   19.986791]  kmem_cache_alloc+0xe4/0x230
[   19.987182]  prepare_creds+0x24/0x440
[   19.987548]  do_faccessat+0x80/0x590
[   19.987906]  do_syscall_64+0xe7/0xae0
[   19.988276]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   19.988775]
[   19.988930] Memory state around the buggy address:
[   19.989402]  ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   19.990111]  ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[   19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   19.991529]                                               ^
[   19.992081]  ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
[   19.992796]  ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler")
Reported-by: default avatarMichael Schmidt <michael.schmidt@eti.uni-siegen.de>
Signed-off-by: default avatarVinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: default avatarAndre Guedes <andre.guedes@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b09fe70e
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7