- 22 Apr, 2022 12 commits
-
-
Sebastian Reichel authored
Add compatible string for rk3588 pin controller. No other changes are required, since the new controller can use the old binding. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220422170920.401914-12-sebastian.reichel@collabora.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The MC2 MMC interface can be configured with the FBCLK (feedback clock) unconnected, leaving the pin available for reuse for something else. Add a group mc2_a_2 for this. Signed-off-by:
-
Lv Ruyi authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately.Make the code simpler without functional changes. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Link: https://lore.kernel.org/r/20220418020238.2556989-1-lv.ruyi@zte.com.cnSigned-off-by:
-
Paul Cercueil authored
By being a bit smarter about how the SoC version checks are performed, it is possible to have all the code paths that correspond to SoCs disabled in the kernel config automatically marked as dead code by the compiler, and therefore garbage-collected. With this patch, when compiling a kernel that only targets the JZ4760 for instance, the driver is now about 4.5 KiB smaller. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220412162218.32509-1-paul@crapouillou.netSigned-off-by:
-
Johan Jonker authored
Add the compatible string "rockchip,rk3036-pinctrl" in already in use in rk3036.dtsi to rockchip,pinctrl.yaml. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220330133952.1949-1-jbx6244@gmail.comSigned-off-by:
-
Alexander Stein authored
Convert the i.MX7D pinctrl binding to DT schema format using json-schema Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220303150653.1903910-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
Krzysztof Kozlowski authored
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220407202509.23228-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Qianggui Song authored
The kernel test robot reported a warning as below: >> drivers/pinctrl/meson/pinctrl-meson-s4.c:178:27: warning: unused variable 'tdm_sclk1_c_pins' [-Wunused-const-variable] static const unsigned int tdm_sclk1_c_pins[] = { GPIOC_3 }; Fix it by adding missing description about this pins Fixes: 775214d3 ("pinctrl: meson: add pinctrl driver support for Meson-S4 Soc") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Qianggui Song <qianggui.song@amlogic.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220330023720.18238-1-qianggui.song@amlogic.comSigned-off-by:
-
Fabien Parent authored
Set the pinctrl driver as built-in by default if ARM64 and ARCH_MEDIATEK are enabled. Fixes: 6cf5e9ef ("pinctrl: add pinctrl driver on mt8195") Signed-off-by:
Fabien Parent <fparent@baylibre.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20220327160813.2978637-1-fparent@baylibre.comSigned-off-by:
-
Caleb Connolly authored
Add support for deferred PIN_CONFIG_INPUT_ENABLE handling. Signed-off-by:
Caleb Connolly <kc@postmarketos.org> Acked-by:
Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220328005005.72492-4-kc@postmarketos.orgSigned-off-by:
-
Caleb Connolly authored
Handle the PIN_CONFIG_INPUT_ENABLE param for configuring GPIOs as input. Signed-off-by:
-
Caleb Connolly authored
Add support for deferring other params like PIN_CONFIG_INPUT_ENABLE. This will be used to add support for PIN_CONFIG_INPUT_ENABLE to the driver. Fixes: e7165b1d ("pinctrl/rockchip: add a queue for deferred pin output settings on probe") Fixes: 59dd178e ("gpio/rockchip: fetch deferred output settings on probe") Signed-off-by:
-
- 21 Apr, 2022 7 commits
-
-
Michael Walle authored
The SoC supports a debug clock output of its internal clocks. Depending on the clk_sel input (GPIO_31) clk_mon (GPIO_30) will output either cpu_clk/64 or sys_clk/64. This is very useful for debugging and is missing in the pinmux table. Add it. Signed-off-by:
Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220326192848.2944519-2-michael@walle.ccSigned-off-by:
-
Michael Walle authored
According to the reference manual, you can mux the PWM output on GPIO27 and GPIO51. This was missing in the pinmux table. Add it. Tested on a LAN9668 on GPIO51. Signed-off-by:
-
Michael Walle authored
Convert the ocelot-pinctrl device tree binding to the new YAML format. Additionally to the original binding documentation, add interrupt properties which are optional and already used on several SoCs like SparX-5, Luton, Ocelot and LAN966x but were not documented before. Also, on the sparx5 and the lan966x SoCs there are two items for the reg property. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220319204628.1759635-7-michael@walle.ccSigned-off-by:
-
Rohit Agarwal authored
PMX65 pmic support gpio controller so add compatible. Signed-off-by:
Rohit Agarwal <quic_rohiagar@quicinc.com> Link: https://lore.kernel.org/r/1649048650-14059-3-git-send-email-quic_rohiagar@quicinc.comSigned-off-by:
-
Rohit Agarwal authored
Add support for the PMX65 GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by:
-
Stefan Wahren authored
The commit c8013355 ("ARM: dts: gpio-ranges property is now required") fixed the GPIO probing issues caused by "pinctrl: bcm2835: Change init order for gpio hogs". This changed only the kernel DTS files. Unfortunately it isn't guaranteed that these files are shipped to all users. So implement the necessary backward compatibility for BCM2835 and BCM2711 platform. Fixes: 266423e6 ("pinctrl: bcm2835: Change init order for gpio hogs") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
-
Stefan Wahren authored
Since commit 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges") the device tree nodes of GPIO controller need the gpio-ranges property to handle gpio-hogs. Unfortunately it's impossible to guarantee that every new kernel is shipped with an updated device tree binary. In order to provide backward compatibility with those older DTB, we need a callback within of_gpiochip_add_pin_range() so the relevant platform driver can handle this case. Fixes: 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges") Signed-off-by:
-
- 19 Apr, 2022 4 commits
-
-
Nícolas F. R. A. Prado authored
Add the gpio-line-names optional property to the pinctrl-mt8192 binding to prevent dt_binding_check warnings when it is present in the pinctrl node in the Devicetree. Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Acked-by:
-
Nícolas F. R. A. Prado authored
Add the mediatek,pull-up-adv property to the pinctrl-mt8192 dt-binding to allow configuring pull-up resistors on the pins of MT8192. It is the same as in mt8183-pinctrl. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Add the mediatek,drive-strength-adv property to the pinctrl-mt8192 dt-binding to allow further drive current adjustments for I2C nodes on MT8192. It is the same as in mt8183-pinctrl. Signed-off-by:
-
Nícolas F. R. A. Prado authored
On mt8192, the pinctrl node has pinctrl groups to group pin configurations. Each pinctrl group contains one or more pinmux subnodes to list needed pins and their configurations. By supporting multiple subnodes, we can configure different pin characteristics (driving/pull-up/pull-down/etc.) in a pinctrl group. Update the mt8192 pinctrl dt-binding to add the missing pinctrl group node that wraps the pinmux subnodes and update the example at the end. While at it, also remove the example embedded in the description since it is redundant to the already supplied example at the end. This same change was done for mt8195 in commit 79dcd4e8 ("dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations"). Signed-off-by:
-
- 17 Apr, 2022 8 commits
-
-
Jae Hyun Yoo authored
Add FWQSPI function/group to support QSPI mode on the dedicated FWSPI interface. Signed-off-by:
Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Acked-by:
-
Johnny Huang authored
Add FWSPIDQ2 (AE12) and FWSPIDQ3 (AF12) function-group to support AST2600 FW SPI quad mode. These pins can be used with dedicated FW SPI pins - FWSPICS0# (AB14), FWSPICK (AF13), FWSPIMOSI (AC14) and FWSPIMISO (AB13). Signed-off-by:
Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by:
-
Jae Hyun Yoo authored
FWQSPID is not a group of FWSPID so remove it. Fixes: 7488838f ("dt-bindings: pinctrl: aspeed: Document AST2600 pinmux") Signed-off-by:
-
Jae Hyun Yoo authored
FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove FWQSPID group in pinctrl. These pins must be used with the FWSPI pins that are dedicated for boot SPI interface which provides same 3.3v logic level. Fixes: 2eda1cde ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by:
-
Chris Packham authored
This pinctrl driver supports the 98DX25xx and 98DX35xx family of chips from Marvell. It is based on the Marvell SDK with additions for various (non-gpio) pin configurations based on the datasheet. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220414233055.586962-3-chris.packham@alliedtelesis.co.nzSigned-off-by:
-
Chris Packham authored
Add JSON schema for marvell,ac5-pinctrl present on the Marvell 98DX2530 SoC. Signed-off-by:
-
Bhupesh Sharma authored
Specify the PDC mapping for SM8150, so that gpio interrupts are properly mapped to the wakeup IRQs of the PDC. Cc: Maulik Shah <quic_mkshah@quicinc.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220226184028.111566-3-bhupesh.sharma@linaro.orgSigned-off-by:
-
Bhupesh Sharma authored
Add the compatible string for SM8150 SoC from Qualcomm. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Acked-by:
-
- 03 Apr, 2022 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
-
Stephen Boyd authored
This reverts commit 7dabfa2b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reported-by:
Tony Lindgren <tony@atomide.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
-
- 02 Apr, 2022 1 commit
-
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Avoid SEGV if core.cpus isn't set in 'perf stat'. - Stop depending on .git files for building PERF-VERSION-FILE, used in 'perf --version', fixing some perf tools build scenarios. - Convert tracepoint.py example to python3. - Update UAPI header copies from the kernel sources: socket, mman-common, msr-index, KVM, i915 and cpufeatures. - Update copy of libbpf's hashmap.c. - Directly return instead of using local ret variable in evlist__create_syswide_maps(), found by coccinelle. * tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf python: Convert tracepoint.py example to python3 perf evlist: Directly return instead of using local ret variable perf cpumap: More cpu map reuse by merge. perf cpumap: Add is_subset function perf evlist: Rename cpus to user_requested_cpus perf tools: Stop depending on .git files for building PERF-VERSION-FILE tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf beauty: Update copy of linux/socket.h with the kernel sources perf tools: Update copy of libbpf's hashmap.c perf stat: Avoid SEGV if core.cpus isn't set
-
