This patch adds audio routing for both playback and capture and
Makefile and Kconfigs changes for wcd937x.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-8-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds required dapm widgets for capture path.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-7-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds required dapm widgets for playback.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-6-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds basic controls found in WCD9370/WCD9375 codec.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-5-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds basic SoundWire codec driver to support for
WCD9370/WCD9375 TX and RX devices.

The WCD9370/WCD9375 has Multi Button Headset Control hardware to
support Headset insertion, type detection, 8 headset buttons detection,
Over Current detection and Impedence measurements.
This patch adds support for this using wcd-mbhc apis.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-4-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to SoundWire devices on WCD9370/WCD9375 Codec.

The WCD9370/WCD9375 Soundwire devices will be used by the
main WCD9370/WCD9375 Audio Codec driver to access registers
and configure Soundwire RX and TX ports.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-3-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Document the Qualcomm WCD9370/WCD9375 Audio Codec and the
Soundwire devices than can be found on Qualcomm QCM6490 based platforms.

The Qualcomm WCD9370/WCD9375 Audio Codec communicates
with the host SoC over 2 Soundwire links to provide:
- 3 TX ADC paths with 4 differential AMIC inputs
- 6 DMIC inputs that are shared with AMIC input
- 4 Microphone BIAS
- RX paths with 4 PAs – HPHL/R, EAR and AUX
- Stereo Headphone output
- MBHC engine for Headset Detection
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240524035535.3119208-2-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert text bindings to dt-schema format for the Amlogic TX HDMI
control glue.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20240606-topic-amlogic-upstream-bindings-convert-g12a-tohdmitx-v2-1-70d44fa30790@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

We have simple-card / audio-graph / audio-graph2, basically these supports
same feature but is using different DT style.

Because we are using 3 drivers, some feature was added to one driver,
but other drivers doesn't have it. This patch set try to sync it on these
3 drivers.

Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:

On i.MX95 wakeup domain, there is one instance of Audio XCVR
supporting SPDIF mode with a connection to the Audio XCVR physical
interface.

Merge series from linux@treblig.org:

Clean out a bunch of old structs in sound/soc/codecs.
Build tested only.

Fix the description for the ti,dmdin-gpio1 and ti,dmclk-gpio2
properties to correctly describe that when configured as general
purpose outputs (ADC3XXX_GPIO_GPO), the pins are available via
the GPIO framework.
Signed-off-by: Ricard Wanderlof <ricard.wanderlof@axis.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://msgid.link/r/20240528-tlv320adc3xxx-dt-gpio-fix-v1-1-209fb2c2f86f@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

On i.MX95, the XCVR uses a new PLL in the PHY, which is
General Purpose (GP) PLL. Add GP PLL configuration support
in the driver and add the 'pll_ver' flag to distinguish
different PLL on different platforms.

The XCVR also use PHY but limited for SPDIF only case
Add 'use_phy' flag to distinguish these platforms.

When there are 'pll8k' and 'pll11k' clock existing, the clock
source of 'phy_clk' can be changed for different sample rate
requirement.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/1716972002-2315-3-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.

The difference between each platform is in below table.

+---------+--------+----------+--------+
|  SOC	  |  PHY   | eARC/ARC | SPDIF  |
+---------+--------+----------+--------+
| i.MX8MP |  V1    |  Yes     |  Yes   |
+---------+--------+----------+--------+
| i.MX93  |  N/A   |  N/A     |  Yes   |
+---------+--------+----------+--------+
| i.MX95  |  V2    |  N/A     |  Yes   |
+---------+--------+----------+--------+

On i.MX95, there are two PLL clock sources, they are the parent
clocks of the XCVR root clock. one is for 8kHz series rates, named
as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'.
They are optional clocks, if there are such clocks, then the driver
can switch between them to support more accurate sample rates.

As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for
clocks and clock-names properties.

On i.MX95, the 'interrupts' configuration has the same constraint
as i.MX93.

Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93
there is no such hardware setting.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://msgid.link/r/1716972002-2315-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Follow the convention already in use by other platforms on naming the
sof_dev_desc struct by dropping the underscore between adl and n
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240603072544.5215-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The "ADC2_BCS Disable Switch" control does basically nothing: sets field
in driver's private data structure which is never read again to
configure hardware.  Drop the control as it has no effect.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523124808.42923-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

All four microphone bias registers have similar layout: VOUT control
mask is exactly the same.  Use one define, just like older driver
wcd938x is doing, to make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523125049.43713-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Now graph_link_init() is parsing dai_link related property.
Let's handle mclk_fs on it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87v82yfrv0.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Audio Graph Card2 is supporting playback/capture_only property,
let's follow Simple Audio Card, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87wmnefrv4.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now graph_link_init() is parsing dai_link related property.
Let's handle mclk_fs on it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87y17ufrv8.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Audio Graph Card2 is supporting playback/capture_only property,
let's follow Audio Graph Card, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87zfsafrvb.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current audio-graph-card is checking if the node name was "ports" or
not when parsing the property.

	if (of_node_name_eq(ports, "ports"))
		of_xxx(ports, ...);

Now, it is using new port_to_ports() which will be NULL if the node
doesn't have "ports", and each of_xxx functions will do nothing if
node was NULL.
Now we don't need to check ports node name. Let's remove and cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/871q5mh6fv.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current audio-graph-card is using of_get_parent() to get "port" from
"ep", or get "ports" from "port". But it is difficlut to understand,
and "ports" might not exist.
This patch adds ep_to_port() to get "port" from "ep", and port_to_ports()
to get "ports" from "port". "ports" will be NULL if not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/8734q2h6fz.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now graph_link_init() is parsing dai_link related property.
Let's handle mclk_fs on it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/874jaih6g3.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current dai_link related property are parsed and enabled only on CPU
port node (A)(b)(c). OTOH, Audio Graph Card2 supports many connections
like Multi-CPU, DPCM, Codec2Codec today. For example in Multi-CPU case,
it will be checked via (X) -> (B) -> (b) process, but (X) / (B) part
property is not parsed.

>From dai_link related settings point of view, (B) (C) part and Codec
port also enabled is more viscerally understandable, and useful.

	card2 {
(X)		links = <&snd-cpu	(A)
			 &snd-multi	(B)
			 &snd-dpcm	(C)
			 ...>

		multi {
			ports {
(B)				snd-multi: port { ... };
				...
			};
		};
		dpcm {
			ports {
(C)				snd-dpcm: port { ... };
				...
			};
		};
		codec2codec {
			...
		};
	};

	cpu_device {
		ports {
(A)			snd-cpu: port { ... };
(b)			mcpu:    port { ... };
(c)			dcpu:    port { ... };
		}
	};

One note here is that if it was Multi-CPU/Codec case, 1st port only
enabled to have property it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/875xuyh6g7.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current audio-graph-card2 is checking if the node name was "ports" or
not when parsing the property.

	if (of_node_name_eq(ports, "ports"))
		of_xxx(ports, ...);

Now, it is using new port_to_ports() which will be NULL if the node
doesn't have "ports", and each of_xxx functions will do nothing if
node was NULL.
Now we don't need to check ports node name. Let's remove and cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/877cfeh6gb.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current audio-graph-card2 is using of_get_parent() to get "port" from
"ep", or get "ports" from "port". But it is difficlut to understand,
and "ports" might not exist.
This patch adds ep_to_port() to get "port" from "ep", and port_to_ports()
to get "ports" from "port". "ports" will be NULL if not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/878qzuh6gf.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

soc-pcm.c :: soc_get_playback_capture() will indicate error
if both playback_only / capture_only were true.

Thus, graph_util_parse_link_direction() which setup playback_only /
capture_only don't need to check it.
And, its return value is not used on existing driver. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87a5kah6gm.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

'cx2072x_eq_ctrl' has been unused since the original
commit a497a436 ("ASoC: Add support for Conexant CX2072X CODEC").

Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://msgid.link/r/20240601225446.183505-4-linux@treblig.orgSigned-off-by: Mark Brown <broonie@kernel.org>

'wm0010_spi_msg' has been unused since the original
commit e3523e01 ("ASoC: wm0010: Add initial wm0010 DSP driver").

Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240601225446.183505-3-linux@treblig.orgSigned-off-by: Mark Brown <broonie@kernel.org>

'rx_macro_reg_mask_val' is unused since the original
commit af3d54b9 ("ASoC: codecs: lpass-rx-macro: add support for
lpass rx macro").

Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://msgid.link/r/20240601225446.183505-2-linux@treblig.orgSigned-off-by: Mark Brown <broonie@kernel.org>

We need this to get the i.MX platforms working in CI again.

Pull ata fixes from Niklas Cassel:

 - Add a quirk for three different devices that have shown issues with
   LPM (link power management). These devices appear to not implement
   LPM properly, since we see command timeouts when enabling LPM. The
   quirk disables LPM for these problematic devices. (Me)

 - Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
   needed and was originally added by mistake when LPM support was
   enabled for this AHCI controller. Enabling the quirk when not needed
   causes the the controller to not be able to detect the connected
   devices on some platforms.

* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
  ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
  ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
  ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous topology parsing fixes:

   - Fix topology parsing regression on older CPUs in the new AMD/Hygon
     parser

   - Fix boot crash on odd Intel Quark and similar CPUs that do not fill
     out cpuinfo_x86::x86_clflush_size and zero out
     cpuinfo_x86::x86_cache_alignment as a result.

     Provide 32 bytes as a general fallback value.

   - Fix topology enumeration on certain rare CPUs where the BIOS locks
     certain CPUID leaves and the kernel unlocked them late, which broke
     with the new topology parsing code. Factor out this unlocking logic
     and move it earlier in the parsing sequence"

* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology/intel: Unlock CPUID before evaluating anything
  x86/cpu: Provide default cache line size if not enumerated
  x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater

Pull scheduler fix from Ingo Molnar:
 "Export a symbol to make life easier for instrumentation/debugging"

* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/x86: Export 'percpu arch_freq_scale'

Pull perf events fix from Ingo Molnar:
 "Add missing MODULE_DESCRIPTION() lines"

* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
  perf/x86/rapl: Add missing MODULE_DESCRIPTION() line

Pull hardening fixes from Kees Cook:

 - scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
   strings

 - mailmap: update entry for Kees Cook

 - kunit/fortify: Remove __kmalloc_node() test

* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kunit/fortify: Remove __kmalloc_node() test
  mailmap: update entry for Kees Cook
  scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings

Pull powerpc fixes from Michael Ellerman:

 - Enforce full ordering for ATOMIC operations with BPF_FETCH

 - Fix uaccess build errors seen with GCC 13/14

 - Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT

 - Drop error message from lparcfg guest name lookup

Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.

* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
  powerpc/uaccess: Use YZ asm constraint for ld
  powerpc/uaccess: Fix build errors seen with GCC 13/14
  powerpc/pseries/lparcfg: drop error message from guest name lookup
  powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH

Merge tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fix from Takashi Sakamoto:
 "After merging a commit 1fffe7a3 ("script: modpost: emit a warning
  when the description is missing"), MODULE_DESCRIPTOR seems to be
  mandatory for kernel modules. In FireWire subsystem, the most of
  practical kernel modules have the field, while KUnit test modules do
  not. A single patch is applied to fix them"

* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: add missing MODULE_DESCRIPTION() to test modules