- 03 Jan, 2006 8 commits
-
-
Eric Dumazet authored
Part of a performance problem with ip_tables is that memory allocation is not NUMA aware, but 'only' SMP aware (ie each CPU normally touch separate cache lines) Even with small iptables rules, the cost of this misplacement can be high on common workloads. Instead of using one vmalloc() area (located in the node of the iptables process), we now allocate an area for each possible CPU, using vmalloc_node() so that memory should be allocated in the CPU's node if possible. Port to arp_tables and ip6_tables by Harald Welte. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Replace existing BIC version 1.1 with new version 2.0. The main change is to replace the window growth function with a cubic function as described in: http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdfSigned-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The latest BICTCP patch at: http://www.csc.ncsu.edu:8080/faculty/rhee/export/bitcp/index_files/Page546.htm disables the low_utilization feature of BICTCP because it doesn't work in some cases. This patch removes it. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Trent Jaeger authored
This patch series implements per packet access control via the extension of the Linux Security Modules (LSM) interface by hooks in the XFRM and pfkey subsystems that leverage IPSec security associations to label packets. Extensions to the SELinux LSM are included that leverage the patch for this purpose. This patch implements the changes necessary to the SELinux LSM to create, deallocate, and use security contexts for policies (xfrm_policy) and security associations (xfrm_state) that enable control of a socket's ability to send and receive packets. Patch purpose: The patch is designed to enable the SELinux LSM to implement access control on individual packets based on the strongly authenticated IPSec security association. Such access controls augment the existing ones in SELinux based on network interface and IP address. The former are very coarse-grained, and the latter can be spoofed. By using IPSec, the SELinux can control access to remote hosts based on cryptographic keys generated using the IPSec mechanism. This enables access control on a per-machine basis or per-application if the remote machine is running the same mechanism and trusted to enforce the access control policy. Patch design approach: The patch's main function is to authorize a socket's access to a IPSec policy based on their security contexts. Since the communication is implemented by a security association, the patch ensures that the security association's negotiated and used have the same security context. The patch enables allocation and deallocation of such security contexts for policies and security associations. It also enables copying of the security context when policies are cloned. Lastly, the patch ensures that packets that are sent without using a IPSec security assocation with a security context are allowed to be sent in that manner. A presentation available at www.selinux-symposium.org/2005/presentations/session2/2-3-jaeger.pdf from the SELinux symposium describes the overall approach. Patch implementation details: The function which authorizes a socket to perform a requested operation (send/receive) on a IPSec policy (xfrm_policy) is selinux_xfrm_policy_lookup. The Netfilter and rcv_skb hooks ensure that if a IPSec SA with a securit y association has not been used, then the socket is allowed to send or receive the packet, respectively. The patch implements SELinux function for allocating security contexts when policies (xfrm_policy) are created via the pfkey or xfrm_user interfaces via selinux_xfrm_policy_alloc. When a security association is built, SELinux allocates the security context designated by the XFRM subsystem which is based on that of the authorized policy via selinux_xfrm_state_alloc. When a xfrm_policy is cloned, the security context of that policy, if any, is copied to the clone via selinux_xfrm_policy_clone. When a xfrm_policy or xfrm_state is freed, its security context, if any is also freed at selinux_xfrm_policy_free or selinux_xfrm_state_free. Testing: The SELinux authorization function is tested using ipsec-tools. We created policies and security associations with particular security contexts and added SELinux access control policy entries to verify the authorization decision. We also made sure that packets for which no security context was supplied (which either did or did not use security associations) were authorized using an unlabelled context. Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Trent Jaeger authored
This patch series implements per packet access control via the extension of the Linux Security Modules (LSM) interface by hooks in the XFRM and pfkey subsystems that leverage IPSec security associations to label packets. Extensions to the SELinux LSM are included that leverage the patch for this purpose. This patch implements the changes necessary to the XFRM subsystem, pfkey interface, ipv4/ipv6, and xfrm_user interface to restrict a socket to use only authorized security associations (or no security association) to send/receive network packets. Patch purpose: The patch is designed to enable access control per packets based on the strongly authenticated IPSec security association. Such access controls augment the existing ones based on network interface and IP address. The former are very coarse-grained, and the latter can be spoofed. By using IPSec, the system can control access to remote hosts based on cryptographic keys generated using the IPSec mechanism. This enables access control on a per-machine basis or per-application if the remote machine is running the same mechanism and trusted to enforce the access control policy. Patch design approach: The overall approach is that policy (xfrm_policy) entries set by user-level programs (e.g., setkey for ipsec-tools) are extended with a security context that is used at policy selection time in the XFRM subsystem to restrict the sockets that can send/receive packets via security associations (xfrm_states) that are built from those policies. A presentation available at www.selinux-symposium.org/2005/presentations/session2/2-3-jaeger.pdf from the SELinux symposium describes the overall approach. Patch implementation details: On output, the policy retrieved (via xfrm_policy_lookup or xfrm_sk_policy_lookup) must be authorized for the security context of the socket and the same security context is required for resultant security association (retrieved or negotiated via racoon in ipsec-tools). This is enforced in xfrm_state_find. On input, the policy retrieved must also be authorized for the socket (at __xfrm_policy_check), and the security context of the policy must also match the security association being used. The patch has virtually no impact on packets that do not use IPSec. The existing Netfilter (outgoing) and LSM rcv_skb hooks are used as before. Also, if IPSec is used without security contexts, the impact is minimal. The LSM must allow such policies to be selected for the combination of socket and remote machine, but subsequent IPSec processing proceeds as in the original case. Testing: The pfkey interface is tested using the ipsec-tools. ipsec-tools have been modified (a separate ipsec-tools patch is available for version 0.5) that supports assignment of xfrm_policy entries and security associations with security contexts via setkey and the negotiation using the security contexts via racoon. The xfrm_user interface is tested via ad hoc programs that set security contexts. These programs are also available from me, and contain programs for setting, getting, and deleting policy for testing this interface. Testing of sa functions was done by tracing kernel behavior. Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Hey, it's fifteen years today since I bought the machine that got Linux started. January 2nd is a good date.
-
Andi Kleen authored
Otherwise a bad mem policy system call can confuse the interleaving code into referencing undefined nodes. Originally reported by Doug Chapman I was told it's CVE-2005-3358 (one has to love these security people - they make everything sound important) Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 02 Jan, 2006 2 commits
-
-
Dag-Erling Smrgrav authored
In commit 3D59121003721a8fad11ee72e646fd9d3076b5679c, the x86 and x86-64 <asm/param.h> was changed to include <linux/config.h> for the configurable timer frequency. However, asm/param.h is sometimes used in userland (it is included indirectly from <sys/param.h>), so your commit pollutes the userland namespace with tons of CONFIG_FOO macros. This greatly confuses software packages (such as BusyBox) which use CONFIG_FOO macros themselves to control the inclusion of optional features. After a short exchange, Christoph approved this patch Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
Some G5s still occasionally experience shutdowns due to overtemp conditions despite the recent fix. After analyzing logs from such machines, it appears that the overtemp code is a bit too quick at shutting the machine down when reaching the critical temperature (tmax + 8) and doesn't leave the fan enough time to actually cool it down. This happens if the temperature of a CPU suddenly rises too high in a very short period of time, or occasionally on boot (that is the CPUs are already overtemp by the time the driver loads). This patches makes the code a bit more relaxed, leaving a few seconds to the fans to do their job before kicking the machine shutown. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 01 Jan, 2006 2 commits
-
-
Stas Sergeev authored
This should fix multi-threaded core-files Signed-off-by: stsp@aknet.ru Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This is a slightly more complete fix for the previous minimal sysctl string fix. It always terminates the returned string with a NUL, even if the full result wouldn't fit in the user-supplied buffer. The returned length is the full untruncated length, so that you can tell when truncation has occurred. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 31 Dec, 2005 3 commits
-
-
Linus Torvalds authored
-
Yi Yang authored
For the sysctl syscall, if the user wants to get the old value of a sysctl entry and set a new value for it in the same syscall, the old value is always overwritten by the new value if the sysctl entry is of string type and if the user sets its strategy to sysctl_string. This issue lies in the strategy being run twice if the strategy is set to sysctl_string, the general strategy sysctl_string always returns 0 if success. Such strategy routines as sysctl_jiffies and sysctl_jiffies_ms return 1 because they do read and write for the sysctl entry. The strategy routine sysctl_string return 0 although it actually read and write the sysctl entry. According to my analysis, if a strategy routine do read and write, it should return 1, if it just does some necessary check but not read and write, it should return 0, for example sysctl_intvec. Signed-off-by: Yi Yang <yang.y.yi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
If the string was too long to fit in the user-supplied buffer, the sysctl layer would zero-terminate it by writing past the end of the buffer. Don't do that. Noticed by Yi Yang <yang.y.yi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 30 Dec, 2005 5 commits
-
-
Linus Torvalds authored
The old /proc interfaces were never updated to use loff_t, and are just generally broken. Now, we should be using the seq_file interface for all of the proc files, but converting the legacy functions is more work than most people care for and has little upside.. But at least we can make the non-LFS rules explicit, rather than just insanely wrapping the offset or something. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Denny Priebe authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Erik Hovland authored
Patch from Erik Hovland This patch provides two changes. An indent is supplied for an if/else clause so that it is more readable. An acronym is incorrectly typed as UER when it should be IER. Signed-off-by: Erik Hovland <erik@hovland.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 29 Dec, 2005 14 commits
-
-
Jean Delvare authored
Thanks to Roman Zippel for the suggestion. Signed-off-by: Jean Delvare <khali@linux-fr.org> [ Short explanation: Kconfig uses ternary math: n/m/y, and !m is m ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This reverts the series of commits 67dbb4ea 281ab031 47807ce3 that changed the GART VM start offset. It fixed some machines, but seems to continually interact badly with some X versions. Quoth Ben Herrenschmidt: "So I think at this point, the best is that we keep the old bogus code that at least is consistent with the bug in the server. I'm working on a big patch to X that reworks the memory map stuff completely and fixes those issues on the server side, I'll do a DRM patch matching this X fix as well so that the memory map is only ever set in one place and with what I hope is a correct algorithm..." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Jean Delvare authored
Fix the cyclic dependency issue between CONFIG_SAA7134_ALSA and CONFIG_SAA7134_OSS (credits to Mauro Carvalho Chehab.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Blanchard authored
Sonny has noticed hotplug CPU on ppc64 is broken in 2.6.15-*. One of the problems is that htab_initialize_secondary is called when a cpu is being brought up, but it is marked __init. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ravikiran G Thirumalai authored
Currently, we do not pass the correct start_pfn to e820_hole_size, to calculate holes. Following patch fixes that. The bug results in incorrect number of node_present_pages for each pgdat and causes ugly output in /sys and probably VM inbalances. Signed-off-by: Alok N Kataria <alokk@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Sighed-off-by: Shair Fultheim <shai@scalex86.org> Sighed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Riccardo Magliocchetti authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dave Jones authored
__get_unaligned creates a typeof the var its passed, and writes to it, which on gcc4.1, spits out the following error: drivers/char/vc_screen.c: In function 'vcs_write': drivers/char/vc_screen.c:422: error: assignment of read-only variable 'val' Signed-off-by: Dave Jones <davej@redhat.com> [ The "right" fix would be to try to fix <asm-generic/unaligned.h> but that's hard to do with the tools gcc gives us. So this simpler patch is preferable -- Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Fix UML compilation when SKAS mode is disabled. Indeed, we were compiling SKAS-only object files, which failed due to some SKAS-only headers being excluded from the search path. Thanks to the bug report from Pekka J Enberg. Acked-by: Pekka J Enberg <penberg (at) cs ! helsinki ! fi> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Today, when compiling UML, I got warnings for two used unexported symbols: readdir64 and truncate64. Indeed, my glibc headers are aliasing readdir to readdir64 and truncate to truncate64 (and so on). I'm then adding additional exports. Since I've no idea if the symbols where always provided in the supported glibc's, I've added weak definitions too. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Prevent page->index << PAGE_CACHE_SHIFT from overflowing. There is a casting there, but was added without care, so it's at the wrong place. Note the extra parens around the shift - "+" is higher precedence than "<<", leading to a GCC warning which saved all us. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Trivial removal of unused variable from this file - doesn't even change the generated assembly code, in fact (gcc should trigger a warning for unused value here). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Don't use printk() where "current_thread_info()" is crap. Until when we switch to running on init_stack, current_thread_info() evaluates to crap. Printk uses "current" at times (in detail, ¤t is evaluated with CONFIG_DEBUG_SPINLOCK to check the spinlock owner task). And this leads to random segmentation faults. Exactly, what happens is that ¤t = *(current_thread_info()), i.e. round down $esp and dereference the value. I.e. access the stack below $esp, which causes SIGSEGV on a VM_GROWSDOWN vma (see arch/i386/mm/fault.c). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 28 Dec, 2005 6 commits
-
-
Linus Torvalds authored
-
David S. Miller authored
Noticed by Christophe Zimmerman, this explains the slow mouse movement with 2.6.x kernels. And checking the 2.4.x drivers/sbus/char/sunmouse.c driver shows we always used a 5-byte protocol with Sun mice in the past. I have no idea how the 3-byte thing got into the 2.6.x driver, but it's surely wrong. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chris Elmquist authored
Resubmitting after recommendation to use GET_REG32_1() instead of GET_REG32_LOOP(..., 1). Retested. Problem remains fixed. Prevent tg3_get_regs() from reading reserved and undocumented registers at RX_CPU_BASE and TX_CPU_BASE offsets which caused hostile behavior on PCIe platforms. Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Benjamin Herrenschmidt authored
As reported by Jules Villard <jvillard@ens-lyon.fr> and some others, the recent GART aperture start reconfiguration causes problems on some setups. What I _think_ might be happening is that the X server is also trying to muck around with the card memory map and is forcing it back into a wrong setting that also happens to no longer match what the DRM wants to do and blows up. There are bugs all over the place in that code (and still some bugs in the DRM as well anyway). This patch attempts to avoid that by using the largest of the 2 values, which I think will cause it to behave as it used to for you and will still fix the problem with machines that have an aperture size smaller than the video memory. Acked-by: Jules Villard <jvillard@ens-lyon.fr> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-