- 28 Jun, 2017 1 commit
-
-
Darrick J. Wong authored
Remove the xfs_etest structure in favor of a per-mountpoint structure. This will give us the flexibility to set as many error injection points as we want, and later enable us to set up sysfs knobs to set the trigger frequency as we wish. This comes at a cost of higher memory use, but unti we hit 1024 injection points (we're at 29) or a lot of mounts this shouldn't be a huge issue. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Carlos Maiolino <cmaiolino@redhat.com>
-
- 24 Jun, 2017 1 commit
-
-
Brian Foster authored
Log recovery allocates in-core transaction and member item data structures on-demand as it processes the on-disk log. Transactions are allocated on first encounter on-disk and stored in a hash table structure where they are easily accessible for subsequent lookups. Transaction items are also allocated on demand and are attached to the associated transactions. When a commit record is encountered in the log, the transaction is committed to the fs and the in-core structures are freed. If a filesystem crashes or shuts down before all in-core log buffers are flushed to the log, however, not all transactions may have commit records in the log. As expected, the modifications in such an incomplete transaction are not replayed to the fs. The in-core data structures for the partial transaction are never freed, however, resulting in a memory leak. Update xlog_do_recovery_pass() to first correctly initialize the hash table array so empty lists can be distinguished from populated lists on function exit. Update xlog_recover_free_trans() to always remove the transaction from the list prior to freeing the associated memory. Finally, walk the hash table of transaction lists as the last step before it goes out of scope and free any transactions that may remain on the lists. This prevents a memory leak of partial transactions in the log. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
- 20 Jun, 2017 7 commits
-
-
Darrick J. Wong authored
bmap returns a dumb LBA address but not the block device that goes with that LBA. Swapfiles don't care about this and will blindly assume that the data volume is the correct blockdev, which is totally bogus for files on the rt subvolume. This results in the swap code doing IOs to arbitrary locations on the data device(!) if the passed in mapping is a realtime file, so just turn off bmap for rt files. Signed-off-by:
-
Darrick J. Wong authored
Expose the readlink variant that doesn't take the inode lock so that the scrubber can inspect symlink contents. Signed-off-by:
-
Darrick J. Wong authored
Teach the extended attribute reading functions to pass along a transaction context if one was supplied. The extended attribute scrub code will use transactions to lock buffers and avoid deadlocking with itself in the case of loops; since it will already have the inode locked, also create xattr get/list helpers that don't take locks. Signed-off-by:
-
Darrick J. Wong authored
Teach the directory reading functions to pass along a transaction context if one was supplied. The directory scrub code will use transactions to lock buffers and avoid deadlocking with itself in the case of loops. Signed-off-by:
-
Darrick J. Wong authored
Modify the existing dir leafn lasthash function to enable us to calculate the highest hash value of a leaf1 block. This will be used by the directory scrubbing code to check the sanity of hashes in leaf1 directory blocks. Signed-off-by:
-
Darrick J. Wong authored
Refactor the inode fork block counting function to count extents for us at the same time. This will be used by the bmbt scrubber function. Signed-off-by:
-
Darrick J. Wong authored
There is an inconsistency in the way that _bmap_count_blocks deals with delalloc reservations -- if the specified fork is in extents format, *count is set to the total number of blocks referenced by the in-core fork, including delalloc extents. However, if the fork is in btree format, *count is set to the number of blocks referenced by the on-disk fork, which does /not/ include delalloc extents. For the lone existing caller of _bmap_count_blocks this hasn't been an issue because the function is only used to count xattr fork blocks (where there aren't any delalloc reservations). However, when scrub comes along it will use this same function to check di_nblocks against both on-disk extent maps, so we need this behavior to be consistent. Therefore, fix _bmap_count_leaves not to include delalloc extents and remove unnecessary parameters. Signed-off-by:
-
- 19 Jun, 2017 30 commits
-
-
Darrick J. Wong authored
Separate the "clear reflink flag" function into one function that checks if the flag is needed, and a second function that checks and clears the flag. The inode scrub code will want to check the necessity of the flag without clearing it. Signed-off-by:
-
Darrick J. Wong authored
Adapt _reflink_find_shared to take an optional transaction pointer. The inode scrubber code will need to decide (within transaction context) if a file has shared blocks. To avoid buffer deadlocks, we must pass the tp through to this function's utility calls. Signed-off-by:
-
Darrick J. Wong authored
Check the inode cache for a particular inode number. If it's in the cache, check that it's not currently being reclaimed. If it's not being reclaimed, return zero if the inode is allocated. This function will be used by various scrubbers to decide if the cache is more up to date than the disk in terms of checking if an inode is allocated. Signed-off-by:
-
Darrick J. Wong authored
Create a function to extract an in-core inobt record from a generic btree_rec union so that scrub will be able to check inobt records and check inode block alignment. Signed-off-by:
-
Darrick J. Wong authored
Plumb in the pieces (init_high_key, diff_two_keys) necessary to call query_range on the inode space and block mapping btrees and to extract raw btree records. This will eventually be used by the inobt and bmbt scrubbers. Signed-off-by:
-
Darrick J. Wong authored
Export various internal functions so that the online scrubber can use them to check the state of metadata. Signed-off-by:
-
Darrick J. Wong authored
The btree record and key inorder check functions will be used by the btree scrubber code, so make sure they're always built. Signed-off-by:
-
Darrick J. Wong authored
This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: -
Darrick J. Wong authored
Don't bother wandering our way through the leaf nodes when the caller issues a query_all; just zoom down the left side of the tree and walk rightwards along level zero. Signed-off-by:
-
Brian Foster authored
When a buffer is modified, logged and committed, it ultimately ends up sitting on the AIL with a dirty bli waiting for metadata writeback. If another transaction locks and invalidates the buffer (freeing an inode chunk, for example) in the meantime, the bli is flagged as stale, the dirty state is cleared and the bli remains in the AIL. If a shutdown occurs before the transaction that has invalidated the buffer is committed, the transaction is ultimately aborted. The log items are flagged as such and ->iop_unlock() handles the aborted items. Because the bli is clean (due to the invalidation), ->iop_unlock() unconditionally releases it. The log item may still reside in the AIL, however, which means the I/O completion handler may still run and attempt to access it. This results in assert failure due to the release of the bli while still present in the AIL and a subsequent NULL dereference and panic in the buffer I/O completion handling. This can be reproduced by running generic/388 in repetition. To avoid this problem, update xfs_buf_item_unlock() to first check whether the bli is aborted and if so, remove it from the AIL before it is released. This ensures that the bli is no longer accessed during the shutdown sequence after it has been freed. Signed-off-by:
-
Brian Foster authored
If a filesystem shutdown occurs with a buffer log item in the CIL and a log force occurs, the ->iop_unpin() handler is generally expected to tear down the bli properly. This entails freeing the bli memory and releasing the associated hold on the buffer so it can be released and the filesystem unmounted. If this sequence occurs while ->bli_refcount is elevated (i.e., another transaction is open and attempting to modify the buffer), however, ->iop_unpin() may not be responsible for releasing the bli. Instead, the transaction may release the final ->bli_refcount reference and thus xfs_trans_brelse() is responsible for tearing down the bli. While xfs_trans_brelse() does drop the reference count, it only attempts to release the bli if it is clean (i.e., not in the CIL/AIL). If the filesystem is shutdown and the bli is sitting dirty in the CIL as noted above, this ends up skipping the last opportunity to release the bli. In turn, this leaves the hold on the buffer and causes an unmount hang. This can be reproduced by running generic/388 in repetition. Update xfs_trans_brelse() to handle this shutdown corner case correctly. If the final bli reference is dropped and the filesystem is shutdown, remove the bli from the AIL (if necessary) and release the bli to drop the buffer hold and ensure an unmount does not hang. Signed-off-by:
-
Arnd Bergmann authored
gcc-7 flags the use of integer math inside of a condition as a potential bug: fs/xfs/xfs_bmap_util.c: In function 'xfs_swap_extents_check_format': fs/xfs/xfs_bmap_util.c:1619:8: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context] fs/xfs/xfs_bmap_util.c:1629:8: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context] There is already a helper function for testing the di_forkoff field for zero, so let's use that instead to shut up the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Shan Hai authored
The t_lsn is not used anymore and the t_commit_lsn is used as a tmp storage for the checkpoint sequence number only in the current code. And the start/commit lsn are tracked as a transaction group tag in the xfs_cil_ctx instead of a single transaction, so remove them from the xfs_trans structure and their users to match with the design. Signed-off-by:
Shan Hai <shan.hai@oracle.com> Reviewed-by:
-
Christoph Hellwig authored
XFS_HSIZE is an extremly confusing way to calculate the size of handle_t. Given that handle_t always only had two sizes, and one of them isn't even covered by XFS_HSIZE to start with just remove the macro and use a constant sizeof expression. Note that XFS_HSIZE isn't used in xfsprogs, xfsdump or xfstests either. Signed-off-by:
Eric Sandeen <sandeen@sandeen.net> Reviewed-by:
-
Brian Foster authored
If a transaction log reservation overrun occurs, the ticket data associated with the reservation is dumped in xfs_log_commit_cil(). This occurs long after the transaction items and details have been removed from the transaction and effectively lost. This limited set of ticket data provides very little information to support debugging transaction overruns based on the typical report. To improve transaction log reservation overrun reporting, create a helper to dump transaction details such as log items, log vector data, etc., as well as the underlying ticket data for the transaction. Move the overrun detection from xfs_log_commit_cil() to xlog_cil_insert_items() so it occurs prior to migration of the logged items to the CIL. Call the new helper such that it is able to dump this transaction data before it is lost. Also, warn on overrun to provide callstack context for the offending transaction and include a few additional messages from xlog_cil_insert_items() to display the reservation consumed locally for overhead such as log vector headers, split region headers and the context ticket. This provides a complete general breakdown of the reservation consumption of a transaction when/if it happens to overrun the reservation. Signed-off-by:
-
Brian Foster authored
Transaction reservation overrun detection currently occurs too late to print useful information about the offending transaction. Ideally, the transaction data is printed before the associated log items are moved from the transaction to the CIL, which occurs in xlog_cil_insert_items(), such that details of the items logged by the transaction are available for analysis. Refactor xlog_cil_insert_items() to facilitate moving tx overrun detection to this function. Update the function to track each bit of extra log reservation stolen from the transaction (i.e., such as for the CIL context ticket) and perform the log item migration as the last operation before the CIL lock is released. This creates a context where the transaction reservation consumption has been fully calculated when the log items are moved to the CIL. This patch makes no functional changes. Signed-off-by:
-
Brian Foster authored
xlog_print_tic_res() pre-dates delayed logging and the committed items list (CIL) and thus retains some factoring warts, such as hard coded function names in the output and the fact that it induces a shutdown. In preparation for more detailed logging of regular transaction overrun situations, refactor xlog_print_tic_res() to be slightly more generic. Reword some of the warning messages and pull the shutdown into the callers. Signed-off-by:
-
Brian Foster authored
While configurable at runtime, the DEBUG mode assert failure behavior is usually either desired or not for a particular situation. For example, developers using kernel modules may prefer for fatal asserts to remain disabled across module reloads while QE engineers doing broad regression testing may prefer to have fatal asserts enabled on boot to facilitate data collection for bug reports. To provide a compromise/convenience for developers, create a Kconfig option that sets the default value of the DEBUG mode 'bug_on_assert' sysfs tunable. The default behavior remains to trigger kernel BUGs on assert failures to preserve existing behavior across kernel configuration updates with DEBUG mode enabled. Signed-off-by:
-
Brian Foster authored
In DEBUG mode, assert failures unconditionally trigger a kernel BUG. This is useful in diagnostic situations to panic a system and collect detailed state information at the time of a failure. This can also cause problems in cases where DEBUG mode code is desired but it is preferable not trigger kernel BUGs on assert failure. For example, during development of new code or during certain xfstests tests that intentionally cause corruption and test the kernel for survival (but otherwise may expect to trigger assert failures). To provide additional flexibility, create the <sysfs>/fs/xfs/debug/bug_on_assert tunable to configure assert failure behavior at runtime. This tunable is only available in DEBUG mode and is enabled by default to preserve existing default behavior. When disabled, assert failures in DEBUG mode result in kernel warnings. Signed-off-by:
-
Darrick J. Wong authored
In a pathological scenario where we are trying to bunmapi a single extent in which every other block is shared, it's possible that trying to unmap the entire large extent in a single transaction can generate so many EFIs that we overflow the transaction reservation. Therefore, use a heuristic to guess at the number of blocks we can safely unmap from a reflink file's data fork in an single transaction. This should prevent problems such as the log head slamming into the tail and ASSERTs that trigger because we've exceeded the transaction reservation. Note that since bunmapi can fail to unmap the entire range, we must also teach the deferred unmap code to roll into a new transaction whenever we get low on reservation. Signed-off-by:
-
Darrick J. Wong authored
Currently, the dir2 leaf block getdents function uses a complex state tracking mechanism to create a shadow copy of the block mappings and then uses the shadow copy to schedule readahead. Since the read and readahead functions are perfectly capable of reading the mappings themselves, we can tear all that out in favor of a simpler function that simply keeps pushing the readahead window further out. Signed-off-by:
-
Brian Foster authored
Reclaim during quotacheck can lead to deadlocks on the dquot flush lock: - Quotacheck populates a local delwri queue with the physical dquot buffers. - Quotacheck performs the xfs_qm_dqusage_adjust() bulkstat and dirties all of the dquots. - Reclaim kicks in and attempts to flush a dquot whose buffer is already queud on the quotacheck queue. The flush succeeds but queueing to the reclaim delwri queue fails as the backing buffer is already queued. The flush unlock is now deferred to I/O completion of the buffer from the quotacheck queue. - The dqadjust bulkstat continues and dirties the recently flushed dquot once again. - Quotacheck proceeds to the xfs_qm_flush_one() walk which requires the flush lock to update the backing buffers with the in-core recalculated values. It deadlocks on the redirtied dquot as the flush lock was already acquired by reclaim, but the buffer resides on the local delwri queue which isn't submitted until the end of quotacheck. This is reproduced by running quotacheck on a filesystem with a couple million inodes in low memory (512MB-1GB) situations. This is a regression as of commit 43ff2122 ("xfs: on-stack delayed write buffer lists"), which removed a trylock and buffer I/O submission from the quotacheck dquot flush sequence. Quotacheck first resets and collects the physical dquot buffers in a delwri queue. Then, it traverses the filesystem inodes via bulkstat, updates the in-core dquots, flushes the corrected dquots to the backing buffers and finally submits the delwri queue for I/O. Since the backing buffers are queued across the entire quotacheck operation, dquot reclaim cannot possibly complete a dquot flush before quotacheck completes. Therefore, quotacheck must submit the buffer for I/O in order to cycle the flush lock and flush the dirty in-core dquot to the buffer. Add a delwri queue buffer push mechanism to submit an individual buffer for I/O without losing the delwri queue status and use it from quotacheck to avoid the deadlock. This restores quotacheck behavior to as before the regression was introduced. Reported-by:
Martin Svec <martin.svec@zoner.cz> Signed-off-by:
-
Linus Torvalds authored
-
Hugh Dickins authored
Stack guard page is a useful feature to reduce a risk of stack smashing into a different mapping. We have been using a single page gap which is sufficient to prevent having stack adjacent to a different mapping. But this seems to be insufficient in the light of the stack usage in userspace. E.g. glibc uses as large as 64kB alloca() in many commonly used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX] which is 256kB or stack strings with MAX_ARG_STRLEN. This will become especially dangerous for suid binaries and the default no limit for the stack size limit because those applications can be tricked to consume a large portion of the stack and a single glibc call could jump over the guard page. These attacks are not theoretical, unfortunatelly. Make those attacks less probable by increasing the stack guard gap to 1MB (on systems with 4k pages; but make it depend on the page size because systems with larger base pages might cap stack allocations in the PAGE_SIZE units) which should cover larger alloca() and VLA stack allocations. It is obviously not a full fix because the problem is somehow inherent, but it should reduce attack space a lot. One could argue that the gap size should be configurable from userspace, but that can be done later when somebody finds that the new 1MB is wrong for some special case applications. For now, add a kernel command line option (stack_guard_gap) to specify the stack gap size (in page units). Implementation wise, first delete all the old code for stack guard page: because although we could get away with accounting one extra page in a stack vma, accounting a larger gap can break userspace - case in point, a program run with "ulimit -S -v 20000" failed when the 1MB gap was counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK and strict non-overcommit mode. Instead of keeping gap inside the stack vma, maintain the stack guard gap as a gap between vmas: using vm_start_gap() in place of vm_start (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few places which need to respect the gap - mainly arch_get_unmapped_area(), and and the vma tree's subtree_gap support for that. Original-patch-by:
Oleg Nesterov <oleg@redhat.com> Original-patch-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Stream of fixes has slowed down, only a few this week: - Some DT fixes for Allwinner platforms, and addition of a clock to the R_CCU clock controller that had been missed. - A couple of small DT fixes for am335x-sl50" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0 ARM: dts: am335x-sl50: Fix card detect pin for mmc1 arm64: allwinner: h5: Remove syslink to shared DTSI ARM: sunxi: h3/h5: fix the compatible of R_CCU -
Olof Johansson authored
Merge tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 4.12 A few fixes around the PRCM support that got in 4.12 with a wrong compatible, and a missing clock in the binding. * tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU arm64: allwinner: h5: Remove syslink to shared DTSI ARM: sunxi: h3/h5: fix the compatible of R_CCU Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Two fixes for am335x-sl50 to fix a boot time error for claiming SPI pins, and to fix a SDIO card detect pin for production version of the device. * tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0 ARM: dts: am335x-sl50: Fix card detect pin for mmc1 Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio bugfix from Michael Tsirkin: "It turns out balloon does not handle IOMMUs correctly. We should fix that at some point, for now let's just disable this configuration" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: disable VIOMMU support
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Two driver bugfixes" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: ismt: fix wrong device address when unmap the data buffer i2c: rcar: use correct length when unmapping DMA
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: - Three highmem fixes: + Fixed mapping initialization + Adjust the pkmap location + Ensure we use at most one page for PTEs - Fix makefile dependencies for .its targets to depend on vmlinux - Fix reversed condition in BNEZC and JIALC software branch emulation - Only flush initialized flush_insn_slot to avoid NULL pointer dereference - perf: Remove incorrect odd/even counter handling for I6400 - ftrace: Fix init functions tracing * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: .its targets depend on vmlinux MIPS: Fix bnezc/jialc return address calculation MIPS: kprobes: flush_insn_slot should flush only if probe initialised MIPS: ftrace: fix init functions tracing MIPS: mm: adjust PKMAP location MIPS: highmem: ensure that we don't use more than one page for PTEs MIPS: mm: fixed mappings: correct initialisation MIPS: perf: Remove incorrect odd/even counter handling for I6400
-
- 18 Jun, 2017 1 commit
-
-
Michael S. Tsirkin authored
virtio balloon bypasses the DMA API entirely so does not support the VIOMMU right now. It's not clear we need that support, for now let's just make sure we don't pretend to support it. Cc: stable@vger.kernel.org Cc: Wei Wang <wei.w.wang@intel.com> Fixes: 1a937693 ("virtio: new feature to detect IOMMU device quirk") Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com>
-
