If function dbg_check_idx_size() failed by loading znode in mounting
process, there are two problems:
  1. Allocated znodes won't be freed, which causes kmemleak in kernel:
     ubifs_mount
      dbg_check_idx_size
       dbg_walk_index
        c->zroot.znode = ubifs_load_znode
	child = ubifs_load_znode // failed
	// Loaded znodes won't be freed in error handling path.
  2. Global variable ubifs_clean_zn_cnt is not decreased, because
     ubifs_tnc_close() is not invoked in error handling path, which
     triggers a warning in ubifs_exit():
      WARNING: CPU: 1 PID: 1576 at fs/ubifs/super.c:2486 ubifs_exit
      Modules linked in: zstd ubifs(-) ubi nandsim
      CPU: 1 PID: 1576 Comm: rmmod Not tainted 6.7.0-rc6
      Call Trace:
	ubifs_exit+0xca/0xc70 [ubifs]
	__do_sys_delete_module+0x29a/0x4a0
	do_syscall_64+0x6f/0x140

Fix it by adding error handling path in dbg_check_idx_size() to release
tnc tree.

Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>

In the error handling path `out_acc` of `ubi_resize_volume()`,
when `pebs < 0`, it indicates that the volume table record failed to
update when the volume was shrunk. In this case, the number of `ubi->avail_pebs`
and `ubi->rsvd_pebs` should be restored to their previous values to prevent
the UBI layer from reporting an incorrect number of available PEBs.
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

When using the ioctl interface to resize a UBI volume, `ubi_resize_volume`
resizes the EBA table first but does not change `vol->reserved_pebs` in
the same atomic context, which may cause concurrent access to the EBA table.

For example, when a user shrinks UBI volume A by calling `ubi_resize_volume`,
while another thread is writing to volume B and triggering wear-leveling,
which may call `ubi_write_fastmap`, under these circumstances, KASAN may
report a slab-out-of-bounds error in `ubi_eba_get_ldesc+0xfb/0x130`.

This patch fixes race conditions in `ubi_resize_volume` and
`ubi_update_fastmap` to avoid out-of-bounds reads of `eba_tbl`. First,
it ensures that updates to `eba_tbl` and `reserved_pebs` are protected
by `vol->volumes_lock`. Second, it implements a rollback mechanism in case
of resize failure. It is also worth mentioning that for volume shrinkage
failures, since part of the volume has already been shrunk and unmapped,
there is no need to recover `{rsvd/avail}_pebs`.

==================================================================
BUG: KASAN: slab-out-of-bounds in ubi_eba_get_ldesc+0xfb/0x130 [ubi]
Read of size 4 at addr ffff88800f43f570 by task kworker/u16:0/7
CPU: 0 PID: 7 Comm: kworker/u16:0 Not tainted 5.16.0-rc7 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
 <TASK>
 dump_stack_lvl+0x4d/0x66
 print_address_description.constprop.0+0x41/0x60
 kasan_report.cold+0x83/0xdf
 ubi_eba_get_ldesc+0xfb/0x130 [ubi]
 ubi_update_fastmap.cold+0x60f/0xc7d [ubi]
 ubi_wl_get_peb+0x25b/0x4f0 [ubi]
 try_write_vid_and_data+0x9a/0x4d0 [ubi]
 ubi_eba_write_leb+0x7e4/0x17d0 [ubi]
 ubi_leb_map+0x1a0/0x2c0 [ubi]
 ubifs_leb_map+0x139/0x270 [ubifs]
 ubifs_add_bud_to_log+0xb40/0xf30 [ubifs]
 make_reservation+0x86e/0xb00 [ubifs]
 ubifs_jnl_write_data+0x430/0x9d0 [ubifs]
 do_writepage+0x1d1/0x550 [ubifs]
 ubifs_writepage+0x37c/0x670 [ubifs]
 __writepage+0x67/0x170
 write_cache_pages+0x259/0xa90
 do_writepages+0x277/0x5d0
 __writeback_single_inode+0xb8/0x850
 writeback_sb_inodes+0x4b3/0xb20
 __writeback_inodes_wb+0xc1/0x220
 wb_writeback+0x59f/0x740
 wb_workfn+0x6d0/0xca0
 process_one_work+0x711/0xfc0
 worker_thread+0x95/0xd00
 kthread+0x3a6/0x490
 ret_from_fork+0x1f/0x30
 </TASK>

Allocated by task 711:
 kasan_save_stack+0x1e/0x50
 __kasan_kmalloc+0x81/0xa0
 ubi_eba_create_table+0x88/0x1a0 [ubi]
 ubi_resize_volume.cold+0x175/0xae7 [ubi]
 ubi_cdev_ioctl+0x57f/0x1a60 [ubi]
 __x64_sys_ioctl+0x13a/0x1c0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Last potentially related work creation:
 kasan_save_stack+0x1e/0x50
 __kasan_record_aux_stack+0xb7/0xc0
 call_rcu+0xd6/0x1000
 blk_stat_free_callback+0x28/0x30
 blk_release_queue+0x8a/0x2e0
 kobject_put+0x186/0x4c0
 scsi_device_dev_release_usercontext+0x620/0xbd0
 execute_in_process_context+0x2f/0x120
 device_release+0xa4/0x240
 kobject_put+0x186/0x4c0
 put_device+0x20/0x30
 __scsi_remove_device+0x1c3/0x300
 scsi_probe_and_add_lun+0x2140/0x2eb0
 __scsi_scan_target+0x1f2/0xbb0
 scsi_scan_channel+0x11b/0x1a0
 scsi_scan_host_selected+0x24c/0x310
 do_scsi_scan_host+0x1e0/0x250
 do_scan_async+0x45/0x490
 async_run_entry_fn+0xa2/0x530
 process_one_work+0x711/0xfc0
 worker_thread+0x95/0xd00
 kthread+0x3a6/0x490
 ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff88800f43f500
 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 112 bytes inside of
 128-byte region [ffff88800f43f500, ffff88800f43f580)
The buggy address belongs to the page:
page:ffffea00003d0f00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xf43c
head:ffffea00003d0f00 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
raw: 001fffff80010200 ffffea000046ba08 ffffea0000457208 ffff88810004d1c0
raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
 ffff88800f43f400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88800f43f480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> ffff88800f43f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc
                                                             ^
 ffff88800f43f580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88800f43f600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

The following steps can used to reproduce:
Process 1: write and trigger ubi wear-leveling
    ubimkvol /dev/ubi0 -s 5000MiB -N v1
    ubimkvol /dev/ubi0 -s 2000MiB -N v2
    ubimkvol /dev/ubi0 -s 10MiB -N v3
    mount -t ubifs /dev/ubi0_0 /mnt/ubifs
    while true;
    do
        filename=/mnt/ubifs/$((RANDOM))
        dd if=/dev/random of=${filename} bs=1M count=$((RANDOM % 1000))
        rm -rf ${filename}
        sync /mnt/ubifs/
    done

Process 2: do random resize
    struct ubi_rsvol_req req;
    req.vol_id = 1;
    req.bytes = (rand() % 50) * 512KB;
    ioctl(fd, UBI_IOCRSVOL, &req);

V3:
 - Fix the commit message error.

V2:
 - Add volumes_lock in ubi_eba_copy_leb() to avoid race caused by
   updating eba_tbl.

V1:
 - Rebase the patch on the latest mainline.
Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Now that the calculation of fastmap size in ubi_calc_fm_size() is
incorrect since it miss each user volume's ubi_fm_eba structure and the
Internal UBI volume info. Let's correct the calculation.

Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Because there is no break statement in the dead loop above,it is
impossible to execute the 'err=0' statement.Delete the code that
will never execute.

Fixes: 6fb324a4 ("UBIFS: allocate ltab checking buffer on demand")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Cc: Kunwu Chan <kunwu.chan@hotmail.com>
Suggested-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

ubifs has a number of callback functions for ubifs_lpt_scan_nolock() using
two different prototypes, either passing a struct scan_data or
a struct ubifs_lp_stats, but the caller expects a void pointer instead.

clang-16 now warns about this:

fs/ubifs/find.c:170:9: error: cast from 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, struct scan_data *)' to 'ubifs_lpt_scan_callback' (aka 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  170 |                                     (ubifs_lpt_scan_callback)scan_for_dirty_cb,
      |                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ubifs/find.c:449:9: error: cast from 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, struct scan_data *)' to 'ubifs_lpt_scan_callback' (aka 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
  449 |                                     (ubifs_lpt_scan_callback)scan_for_free_cb,
      |                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Change all of these callback functions to actually take the void * argument
that is passed by their caller.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

The global sort() function expects a callback pointer to a function with two
void* arguments, but ubifs has a function with specific object types, which
causes a warning in clang-16 and higher:

fs/ubifs/lprops.c:1272:9: error: cast from 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, struct ubifs_lp_stats *)' to 'ubifs_lpt_scan_callback' (aka 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
 1272 |                                     (ubifs_lpt_scan_callback)scan_check_cb,
      |                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Change the prototype to the regular one and cast the object pointers
locally instead.

Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

If the LEB size is smaller than a volume table record we cannot
have volumes.
In this case abort attaching.

Cc: Chenyuan Yang <cy54@illinois.edu>
Cc: stable@vger.kernel.org
Fixes: 801c135c ("UBI: Unsorted Block Images")
Reported-by: Chenyuan Yang <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-mtd/1433EB7A-FC89-47D6-8F47-23BE41B263B3@illinois.edu/Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>

Recognizing Zhihao Cheng's valuable contributions,
let's officially appoint him as a UBI/UBIFS reviewer.
His demonstrated expertise and assistance make him a valuable
addition to the MTD community.

Cc: Zhihao Cheng <chengzhihao1@huawei.com>
Acked-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Both callers now have a folio, so pass it in.  This function contains
several assumptions that folios are not large.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

When looking in the page cache, retrieve a folio instead of a page.
This would need some work to make it safe for large folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

This saves a single call to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

The one caller already has a folio, so pass it in instead of the page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

The one caller has a folio, so pass it in instead of the page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

All the callers now have a folio, so pass it in, and convert do_readpage()
to us folios directly.  Includes unifying the exit paths from this
function and using kmap_local instead of plain kmap.  This function
should now work with large folios, but this is not tested.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Convert the incoming page pointer to a folio and use it throughout,
saving several calls to compound_head().  Also remove some PAGE_SIZE
assumptions.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Save eight calls to compound_head() by using the new folio API.
Remove a few assumptions that would break with large folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Update to new APIs, removing several calls to compound_head() and
including support for large folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Replace six implicit calls to compound_head() with one.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Replace the call to SetPageError() with a call to mapping_set_error().
Support large folios by using kmap_local_folio() and remapping each time
we cross a page boundary.  Saves a lot of hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Convert from the old page APIs to the new folio APIs which saves
a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

We still pass the page down to do_writepage(), but ubifs_writepage()
itself is now large folio safe.  It also contains far fewer hidden calls
to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

This is a simplistic conversion to separate out any effects of
no longer having a writepage method.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Page cache reads are lockless, so setting the freshly allocated page
uptodate before we've overwritten it with the data it's supposed to have
in it will allow a simultaneous reader to see old data.  Move the call
to SetPageUptodate into ubifs_write_end(), which is after we copied the
new data into the page.

Fixes: 1e51764a ("UBIFS: add new flash file system")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Reformat nested if-conditionals in Makefiles with 4 spaces

 - Fix CONFIG_DEBUG_INFO_BTF builds for big endian

 - Fix modpost for module srcversion

 - Fix an escape sequence warning in gen_compile_commands.py

 - Fix kallsyms to ignore ARMv4 thunk symbols

* tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kallsyms: ignore ARMv4 thunks along with others
  modpost: trim leading spaces when processing source files list
  gen_compile_commands: fix invalid escape sequence warning
  kbuild: Fix changing ELF file type for output of gen_btf for big endian
  docs: kconfig: Fix grammar and formatting
  kbuild: use 4-space indentation when followed by conditionals

Pull x86 fix from Borislav Petkov:

 - Use a GB page for identity mapping only when memory of this size is
   requested so that mapping of reserved regions is prevented which
   would otherwise lead to system crashes on UV machines

* tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/ident_map: Use gbpages only where full GB page should be mapped.

Pull irq fixes from Borislav Petkov:

 - Fix GICv4.1 affinity update

 - Restore a quirk for ACPI-based GICv4 systems

 - Handle non-coherent GICv4 redistributors properly

 - Prevent spurious interrupts on Broadcom devices using GIC v3
   architecture

 - Other minor fixes

* tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update
  irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems
  irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors
  irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init()
  irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc()
  irqchip/irq-brcmstb-l2: Add write memory barrier before exit

Pull i2c fixes from Wolfram Sang:
 "Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd
  addresses a compilation error encountered during compile test on
  powerpc"

* tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix block process call transactions
  i2c: pasemi: split driver into two separate modules
  i2c: qcom-geni: Correct I2C TRE sequence

Pull powerpc fixes from Michael Ellerman:
 "This is a bit of a big batch for rc4, but just due to holiday hangover
  and because I didn't send any fixes last week due to a late revert
  request. I think next week should be back to normal.

   - Fix ftrace bug on boot caused by exit text sections with
     '-fpatchable-function-entry'

   - Fix accuracy of stolen time on pseries since the switch to
     VIRT_CPU_ACCOUNTING_GEN

   - Fix a crash in the IOMMU code when doing DLPAR remove

   - Set pt_regs->link on scv entry to fix BPF stack unwinding

   - Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke
     gdb

   - Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled

   - Fix build failures with KASAN enabled and 32KB stack size

   - Some other minor fixes

  Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David
  Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias
  Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A,
  R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy,
  Srikar Dronamraju, and Venkat Rao Bagalkote"

* tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
  powerpc/pseries: fix accuracy of stolen time
  powerpc/ftrace: Ignore ftrace locations in exit text sections
  powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E
  powerpc/kasan: Limit KASAN thread size increase to 32KB
  Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add"
  powerpc: 85xx: mark local functions static
  powerpc: udbg_memcons: mark functions static
  powerpc/kasan: Fix addr error caused by page alignment
  powerpc/6xx: set High BAT Enable flag on G2_LE cores
  selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code()
  powerpc/64: Set task pt_regs->link to the LR value on scv entry
  powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add
  powerpc/pseries/papr-sysparm: use u8 arrays for payloads

Pull bcachefs fixes from Kent Overstreet:
 "Mostly pretty trivial, the user visible ones are:

   - don't barf when replicas_required > replicas

   - fix check_version_upgrade() so it doesn't do something nonsensical
     when we're downgrading"

* tag 'bcachefs-2024-02-17' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix missing va_end()
  bcachefs: Fix check_version_upgrade()
  bcachefs: Clamp replicas_required to replicas
  bcachefs: fix missing endiannes conversion in sb_members
  bcachefs: fix kmemleak in __bch2_read_super error handling path
  bcachefs: Fix missing bch2_err_class() calls

Pull driver core fixes from Greg KH:
 "Here are some driver core fixes, a kobject fix, and a documentation
  update for 6.8-rc5. In detail these changes are:

   - devlink fixes for reported issues with 6.8-rc1

   - topology scheduling regression fix that has been reported by many

   - kobject loosening of checks change in -rc1 is now reverted as some
     codepaths seemed to need the checks

   - documentation update for the CVE process. Has been reviewed by
     many, the last minute change to the document was to bring the .rst
     format back into the the new style rules, the contents did not
     change.

  All of these, except for the documentation update, have been in
  linux-next for over a week. The documentation update has been reviewed
  for weeks by a group of developers, and in public for a week and the
  wording has stabilized for now. If future changes are needed, we can
  do so before 6.8-final is out (or anytime after that)"

* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: Document the Linux Kernel CVE process
  Revert "kobject: Remove redundant checks for whether ktype is NULL"
  driver core: fw_devlink: Improve logs for cycle detection
  driver core: fw_devlink: Improve detection of overlapping cycles
  driver core: Fix device_link_flag_is_sync_state_only()
  topology: Set capacity_freq_ref in all cases

Pull char / miscdriver fixes from Greg KH:
 "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.

  Included in here are:

   - lots of iio driver fixes for reported issues

   - nvmem device naming fixup for reported problem

   - interconnect driver fixes for reported issues

  All of these have been in linux-next for a while with no reported the
  issues (the nvmem patch was included in a different branch in
  linux-next before sent to me for inclusion here)"

* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  nvmem: include bit index in cell sysfs file name
  iio: adc: ad4130: only set GPIO_CTRL if pin is unused
  iio: adc: ad4130: zero-initialize clock init data
  interconnect: qcom: x1e80100: Add missing ACV enable_mask
  interconnect: qcom: sm8650: Use correct ACV enable_mask
  iio: accel: bma400: Fix a compilation problem
  iio: commom: st_sensors: ensure proper DMA alignment
  iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
  iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
  staging: iio: ad5933: fix type mismatch regression
  iio: humidity: hdc3020: fix temperature offset
  iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
  iio: adc: ad_sigma_delta: ensure proper DMA alignment
  iio: imu: adis: ensure proper DMA alignment
  iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
  iio: imu: bno055: serdev requires REGMAP
  iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
  iio: pressure: bmp280: Add missing bmp085 to SPI id table
  iio: core: fix memleak in iio_device_register_sysfs
  interconnect: qcom: sm8550: Enable sync_state
  ...

Pull tty / serial fixes from Greg KH:
 "Here are three small tty and serial driver fixes for 6.8-rc5:

   - revert a 8250_pci1xxxx off-by-one change that was incorrect

   - two changes to fix the transmit path of the mxs-auart driver,
     fixing a regression in the 6.2 release

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: mxs-auart: fix tx
  serial: core: introduce uart_port_tx_flags()
  serial: 8250_pci1xxxx: partially revert off by one patch

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are two small fixes for 6.8-rc5:

   - thunderbolt to fix a reported issue on many platforms

   - dwc3 driver revert of a commit that caused problems in -rc1

  Both of these changes have been in linux-next for over a week with no
  reported issues"

* tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "usb: dwc3: Support EBC feature of DWC_usb31"
  thunderbolt: Fix setting the CNS bit in ROUTER_CS_5

Pull media fixes from Mauro Carvalho Chehab:

 - regression fix for rkisp1 shared IRQ logic

 - fix atomisp breakage due to a kAPI change

 - permission fix for remote controller BPF support

 - memleak fix in ir_toy driver

 - Kconfig dependency fix for pwm-ir-rx

* tag 'media/v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: pwm-ir-tx: Depend on CONFIG_HIGH_RES_TIMERS
  media: ir_toy: fix a memleak in irtoy_tx
  media: rc: bpf attach/detach requires write permission
  media: atomisp: Adjust for v4l2_subdev_state handling changes in 6.8
  media: rkisp1: Fix IRQ handling due to shared interrupts
  media: Revert "media: rkisp1: Drop IRQF_SHARED"

Pull pci fixes from Bjorn Helgaas:

 - Keep bridges in D0 if we need to poll downstream devices for PME to
   resolve a v6.6 regression where we failed to enumerate devices below
   bridges put in D3hot by runtime PM, e.g., NVMe drives connected via
   Thunderbolt or USB4 docks (Alex Williamson)

 - Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer

* tag 'pci-v6.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
  PCI: Fix active state requirement in PME polling

Merge tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fix from Masami Hiramatsu:

 - tracing/probes: Fix BTF structure member finder to find the members
   which are placed after any anonymous union member correctly.

* tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix to search structure fields correctly

Pull smb client fixes from Steve French:
 "Five smb3 client fixes, most also for stable:

   - Two multichannel fixes (one to fix potential handle leak on retry)

   - Work around possible serious data corruption (due to change in
     folios in 6.3, for cases when non standard maximum write size
     negotiated)

   - Symlink creation fix

   - Multiuser automount fix"

* tag '6.8-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: Fix regression in writes when non-standard maximum write size negotiated
  smb: client: handle path separator of created SMB symlinks
  smb: client: set correct id, uid and cruid for multiuser automounts
  cifs: update the same create_guid on replay
  cifs: fix underflow in parse_server_interfaces()

The Linux kernel project now has the ability to assign CVEs to fixed
issues, so document the process and how individual developers can get a
CVE if one is not automatically assigned for their fixes.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/2024021731-essence-sadness-28fd@gregkhSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>