One of Jakub's tests[1] shows that there may be period all ports
are down and no active slave. This makes the new_active_slave null
and the test fails. Add a check to make sure the new active is not null.

 [  189.051966] br0: port 2(s1) entered disabled state
 [  189.317881] bond0: (slave eth1): link status definitely down, disabling slave
 [  189.318487] bond0: (slave eth2): making interface the new active one
 [  190.435430] br0: port 4(s2) entered disabled state
 [  190.773786] bond0: (slave eth0): link status definitely down, disabling slave
 [  190.774204] bond0: (slave eth2): link status definitely down, disabling slave
 [  190.774715] bond0: now running without any active interface!
 [  190.877760] bond0: (slave eth0): link status definitely up
 [  190.878098] bond0: (slave eth0): making interface the new active one
 [  190.878495] bond0: active interface up!
 [  191.802872] br0: port 4(s2) entered blocking state
 [  191.803157] br0: port 4(s2) entered forwarding state
 [  191.813756] bond0: (slave eth2): link status definitely up
 [  192.847095] br0: port 2(s1) entered blocking state
 [  192.847396] br0: port 2(s1) entered forwarding state
 [  192.853740] bond0: (slave eth1): link status definitely up
 # TEST: prio (active-backup ns_ip6_target primary_reselect 1)         [FAIL]
 # Current active slave is null but not eth0

[1] https://netdev-3.bots.linux.dev/vmksft-bonding/results/464481/1-bond-options-sh/stdout

Fixes: 45bf79bc ("selftests: bonding: reduce garp_test/arp_validate test time")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code block under the "!ds->user_mii_bus && ds->ops->phy_read" check
under dsa_switch_setup() populates ds->user_mii_bus. The use of
ds->user_mii_bus is inappropriate when the MDIO bus of the switch is
described on the device tree [1].

For this reason, use this code block only for switches [with MDIO bus]
probed on platform_data, and OF which the switch MDIO bus isn't described
on the device tree. Therefore, remove OF-based MDIO bus registration as
it's useless for these cases.

These subdrivers which control switches [with MDIO bus] probed on OF, will
lose the ability to register the MDIO bus OF-based:

drivers/net/dsa/b53/b53_common.c
drivers/net/dsa/lan9303-core.c
drivers/net/dsa/vitesse-vsc73xx-core.c

These subdrivers let the DSA core driver register the bus:
- ds->ops->phy_read() and ds->ops->phy_write() are present.
- ds->user_mii_bus is not populated.

The commit fe7324b9 ("net: dsa: OF-ware slave_mii_bus") which brought
OF-based MDIO bus registration on the DSA core driver is reasonably recent
and, in this time frame, there have been no device trees in the Linux
repository that started describing the MDIO bus, or dt-bindings defining
the MDIO bus for the switches these subdrivers control. So I don't expect
any devices to be affected.

The logic we encourage is that all subdrivers should register the switch
MDIO bus on their own [2]. And, for subdrivers which control switches [with
MDIO bus] probed on OF, this logic must be followed to support all cases
properly:

No switch MDIO bus defined: Populate ds->user_mii_bus, register the MDIO
bus, set the interrupts for PHYs if "interrupt-controller" is defined at
the switch node. This case should only be covered for the switches which
their dt-bindings documentation didn't document the MDIO bus from the
start. This is to keep supporting the device trees that do not describe the
MDIO bus on the device tree but the MDIO bus is being used nonetheless.

Switch MDIO bus defined: Don't populate ds->user_mii_bus, register the MDIO
bus, set the interrupts for PHYs if ["interrupt-controller" is defined at
the switch node and "interrupts" is defined at the PHY nodes under the
switch MDIO bus node].

Switch MDIO bus defined but explicitly disabled: If the device tree says
status = "disabled" for the MDIO bus, we shouldn't need an MDIO bus at all.
Instead, just exit as early as possible and do not call any MDIO API.

After all subdrivers that control switches with MDIO buses are made to
register the MDIO buses on their own, we will be able to get rid of
dsa_switch_ops :: phy_read() and :: phy_write(), and the code block for
registering the MDIO bus on the DSA core driver.

Link: https://lore.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/ [1]
Link: https://lore.kernel.org/netdev/20240103184459.dcbh57wdnlox6w7d@skbuf/ [2]
Suggested-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240213-for-netnext-dsa-mdio-bus-v2-1-0ff6f4823a9e@arinc9.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Stanislaw Gruszka says:

====================
thermal/netlink/intel_hfi: Enable HFI feature only when required

The patchset introduces a new genetlink family bind/unbind callbacks
and thermal/netlink notifications, which allow drivers to send netlink
multicast events based on the presence of actual user-space consumers.
This functionality optimizes resource usage by allowing disabling
of features when not needed.

v1: https://lore.kernel.org/linux-pm/20240131120535.933424-1-stanislaw.gruszka@linux.intel.com//
v2: https://lore.kernel.org/linux-pm/20240206133605.1518373-1-stanislaw.gruszka@linux.intel.com/
v3: https://lore.kernel.org/linux-pm/20240209120625.1775017-1-stanislaw.gruszka@linux.intel.com/
====================

Link: https://lore.kernel.org/r/20240212161615.161935-1-stanislaw.gruszka@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add genetlink family bind()/unbind() callbacks when adding/removing
multicast group to/from netlink client socket via setsockopt() or
bind() syscall.

They can be used to track if consumers of netlink multicast messages
emerge or disappear. Thus, a client implementing callbacks, can now
send events only when there are active consumers, preventing unnecessary
work when none exist.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240212161615.161935-2-stanislaw.gruszka@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The debug.config file is really great to easily enable a bunch of
general debugging features on a CI-like setup. But it would be great to
also include core networking debugging config.

A few CI's validating features from the Net tree also enable a few other
debugging options on top of debug.config. A small selection is quite
generic for the whole net tree. They validate some assumptions in
different parts of the core net tree. As suggested by Jakub Kicinski in
[1], having them added to this debug.config file would help other CIs
using network features to find bugs in this area.

Note that the two REFCNT configs also select REF_TRACKER, which doesn't
seem to be an issue.

Link: https://lore.kernel.org/netdev/20240202093148.33bd2b14@kernel.org/T/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240212-kconfig-debug-enable-net-v1-1-fb026de8174c@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

net/core/dev.c
  9f308313 ("net: add rcu safety to rtnl_prop_list_size()")
  723de3eb ("net: free altname using an RCU callback")

net/unix/garbage.c
  11498715 ("af_unix: Remove io_uring code for GC.")
  25236c91 ("af_unix: Fix task hung while purging oob_skb in GC.")

drivers/net/ethernet/renesas/ravb_main.c
  ed4adc07 ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
  c2da9408 ("ravb: Add Rx checksum offload support for GbEth")

net/mptcp/protocol.c
  bdd70eb6 ("mptcp: drop the push_pending field")
  28e5c138 ("mptcp: annotate lockless accesses around read-mostly fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from can, wireless and netfilter.

  Current release - regressions:

   - af_unix: fix task hung while purging oob_skb in GC

   - pds_core: do not try to run health-thread in VF path

  Current release - new code bugs:

   - sched: act_mirred: don't zero blockid when net device is being
     deleted

  Previous releases - regressions:

   - netfilter:
      - nat: restore default DNAT behavior
      - nf_tables: fix bidirectional offload, broken when unidirectional
        offload support was added

   - openvswitch: limit the number of recursions from action sets

   - eth: i40e: do not allow untrusted VF to remove administratively set
     MAC address

  Previous releases - always broken:

   - tls: fix races and bugs in use of async crypto

   - mptcp: prevent data races on some of the main socket fields, fix
     races in fastopen handling

   - dpll: fix possible deadlock during netlink dump operation

   - dsa: lan966x: fix crash when adding interface under a lag when some
     of the ports are disabled

   - can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock

  Misc:

   - a handful of fixes and reliability improvements for selftests

   - fix sysfs documentation missing net/ in paths

   - finish the work of squashing the missing MODULE_DESCRIPTION()
     warnings in networking"

* tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  net: fill in MODULE_DESCRIPTION()s for missing arcnet
  net: fill in MODULE_DESCRIPTION()s for mdio_devres
  net: fill in MODULE_DESCRIPTION()s for ppp
  net: fill in MODULE_DESCRIPTION()s for fddik/skfp
  net: fill in MODULE_DESCRIPTION()s for plip
  net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb
  net: fill in MODULE_DESCRIPTION()s for xen-netback
  net: ravb: Count packets instead of descriptors in GbEth RX path
  pppoe: Fix memory leak in pppoe_sendmsg()
  net: sctp: fix skb leak in sctp_inq_free()
  net: bcmasp: Handle RX buffer allocation failure
  net-timestamp: make sk_tskey more predictable in error path
  selftests: tls: increase the wait in poll_partial_rec_async
  ice: Add check for lport extraction to LAG init
  netfilter: nf_tables: fix bidirectional offload regression
  netfilter: nat: restore default DNAT behavior
  netfilter: nft_set_pipapo: fix missing : in kdoc
  igc: Remove temporary workaround
  igb: Fix string truncation warnings in igb_set_fw_version
  can: netlink: Fix TDCO calculation using the old data bittiming
  ...

Pull xen fixes from Juergen Gross:
 "Fixes and simple cleanups:

   - use a proper flexible array instead of a one-element array in order
     to avoid array-bounds sanitizer errors

   - add NULL pointer checks after allocating memory

   - use memdup_array_user() instead of open-coding it

   - fix a rare race condition in Xen event channel allocation code

   - make struct bus_type instances const

   - make kerneldoc inline comments match reality"

* tag 'for-linus-6.8a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/events: close evtchn after mapping cleanup
  xen/gntalloc: Replace UAPI 1-element array
  xen: balloon: make balloon_subsys const
  xen: pcpu: make xen_pcpu_subsys const
  xen/privcmd: Use memdup_array_user() in alloc_ioreq()
  x86/xen: Add some null pointer checking to smp.c
  xen/xenbus: document will_handle argument for xenbus_watch_path()

In commit 4356e9f8 ("work around gcc bugs with 'asm goto' with
outputs") I did the gcc workaround unconditionally, because the cause of
the bad code generation wasn't entirely clear.

In the meantime, Jakub Jelinek debugged the issue, and has come up with
a fix in gcc [2], which also got backported to the still maintained
branches of gcc-11, gcc-12 and gcc-13.

Note that while the fix technically wasn't in the original gcc-14
branch, Jakub says:

 "while it is true that no GCC 14 snapshots until today (or whenever the
  fix will be committed) have the fix, for GCC trunk it is up to the
  distros to use the latest snapshot if they use it at all and would
  allow better testing of the kernel code without the workaround, so
  that if there are other issues they won't be discovered years later.
  Most userland code doesn't actually use asm goto with outputs..."

so we will consider gcc-14 to be fixed - if somebody is using gcc
snapshots of the gcc-14 before the fix, they should upgrade.

Note that while the bug goes back to gcc-11, in practice other gcc
changes seem to have effectively hidden it since gcc-12.1 as per a
bisect by Jakub.  So even a gcc-14 snapshot without the fix likely
doesn't show actual problems.

Also, make the default 'asm_goto_output()' macro mark the asm as
volatile by hand, because of an unrelated gcc issue [1] where it doesn't
match the documented behavior ("asm goto is always volatile").

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103979 [1]
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 [2]
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/Requested-by: Jakub Jelinek <jakub@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull devicetree fixes from Rob Herring:

 - Improve devlink dependency parsing for DT graphs

 - Fix devlink handling of io-channels dependencies

 - Fix PCI addressing in marvell,prestera example

 - A few schema fixes for property constraints

 - Improve performance of DT unprobed devices kselftest

 - Fix regression in DT_SCHEMA_FILES handling

 - Fix compile error in unittest for !OF_DYNAMIC

* tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg"
  of: property: Add in-ports/out-ports support to of_graph_get_port_parent()
  of: property: Improve finding the supplier of a remote-endpoint property
  of: property: Improve finding the consumer of a remote-endpoint property
  net: marvell,prestera: Fix example PCI bus addressing
  of: unittest: Fix compile in the non-dynamic case
  of: property: fix typo in io-channels
  dt-bindings: tpm: Drop type from "resets"
  dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints
  dt-bindings: xilinx: replace Piyush Mehta maintainership
  kselftest: dt: Stop relying on dirname to improve performance
  dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory

Pull spi fixes from Mark Brown:
 "A smallish collection of fixes for SPI, all driver specific, plus one
  device ID addition for a new Intel part.

  The ppc4xx isn't routinely covered by most of the automated testing so
  there were some errors that were missed in some of the recent API
  conversions, otherwise there's nothing super remarkable here"

* tag 'spi-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi-mxs: Fix chipselect glitch
  spi: intel-pci: Add support for Lunar Lake-M SPI serial flash
  spi: omap2-mcspi: Revert FIFO support without DMA
  spi: ppc4xx: Drop write-only variable
  spi: ppc4xx: Fix fallout from rename in struct spi_bitbang
  spi: ppc4xx: Fix fallout from include cleanup
  spi: spi-ppc4xx: include missing platform_device.h
  spi: imx: fix the burst length at DMA mode and CPU mode

Pull regmap test fixes from Mark Brown:
 "Guenter runs a lot of KUnit tests so noticed that there were a couple
  of the regmap tests, including the newly added noinc test, which could
  show spurious failures due to the use of randomly generated test
  values. These changes handle the randomly generated data properly"

* tag 'regmap-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: kunit: Ensure that changed bytes are actually different
  regmap: kunit: fix raw noinc write test wrapping

Pull HID fixes from Jiri Kosina:

 - fix for 'MSC_SERIAL = 0' corner case handling in wacom driver (Jason
   Gerecke)

 - ACPI S3 suspend/resume fix for intel-ish-hid (Even Xu)

 - race condition fix preventing Wacom driver from losing events shortly
   after initialization (Jason Gerecke)

 - fix preventing certain Logitech HID++ devices from spamming kernel
   log (Oleksandr Natalenko)

* tag 'hid-for-linus-2024021501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: generic: Avoid reporting a serial of '0' to userspace
  HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspend
  HID: multitouch: Add required quirk for Synaptics 0xcddc device
  HID: wacom: Do not register input devices until after hid_hw_start
  HID: logitech-hidpp: Do not flood kernel log

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-02-06 (igb, igc)

This series contains updates to igb and igc drivers.

Kunwu Chan adjusts firmware version string implementation to resolve
possible NULL pointer issue for igb.

Sasha removes workaround on igc.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  igc: Remove temporary workaround
  igb: Fix string truncation warnings in igb_set_fw_version
====================

Link: https://lore.kernel.org/r/20240214180347.3219650-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Breno Leitao says:

====================
Fix MODULE_DESCRIPTION() for net (p6)

There are a few network modules left that misses MODULE_DESCRIPTION(),
causing a warnning when compiling with W=1. Example:

        WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/....

This last patchset solves the problem for all the missing driver. It is
not expect to see any warning for the driver/net and net/ directory once
all these patches have landed.

v1: https://lore.kernel.org/all/20240213112122.404045-1-leitao@debian.org/
====================

Link: https://lore.kernel.org/r/20240214152741.670178-1-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the ARC modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-8-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PHY MDIO helpers.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240214152741.670178-7-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PPP modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-6-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the SysKonnect FDDI PCI module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-5-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PLIP (parallel port) network module
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-4-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IEEE 802.15.4 loopback driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-3-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Xen backend network module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240214152741.670178-2-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The units of "work done" in the RX path should be packets instead of
descriptors, as large packets can be spread over multiple descriptors.

Fixes: 1c59eb67 ("ravb: Fillup ravb_rx_gbeth() stub")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240214151204.2976-1-paul.barker.ct@bp.renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reports a memory leak in pppoe_sendmsg [1].

The problem is in the pppoe_recvmsg() function that handles errors
in the wrong order. For the skb_recv_datagram() function, check
the pointer to skb for NULL first, and then check the 'error' variable,
because the skb_recv_datagram() function can set 'error'
to -EAGAIN in a loop but return a correct pointer to socket buffer
after a number of attempts, though 'error' remains set to -EAGAIN.

skb_recv_datagram
      __skb_recv_datagram          // Loop. if (err == -EAGAIN) then
                                   // go to the next loop iteration
          __skb_try_recv_datagram  // if (skb != NULL) then return 'skb'
                                   // else if a signal is received then
                                   // return -EAGAIN

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.

Link: https://syzkaller.appspot.com/bug?extid=6bdfd184eac7709e5cc9 [1]

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+6bdfd184eac7709e5cc9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6bdfd184eac7709e5cc9Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20240214085814.3894917-1-Ilia.Gavrilov@infotecs.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In case of GSO, 'chunk->skb' pointer may point to an entry from
fraglist created in 'sctp_packet_gso_append()'. To avoid freeing
random fraglist entry (and so undefined behavior and/or memory
leak), introduce 'sctp_inq_chunk_free()' helper to ensure that
'chunk->skb' is set to 'chunk->head_skb' (i.e. fraglist head)
before calling 'sctp_chunk_free()', and use the aforementioned
helper in 'sctp_inq_pop()' as well.

Reported-by: syzbot+8bb053b5d63595ab47db@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=0d8351bbe54fd04a492c2daab0164138db008042
Fixes: 90017acc ("sctp: Add GSO support")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20240214082224.10168-1-dmantipov@yandex.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-ipv6-addrconf-ensure-that-temporary-addresses-preferred-lifetimes-are-long-enough'

Alex Henrie says:

====================
net: ipv6/addrconf: ensure that temporary addresses' preferred lifetimes are long enough

v2 corrects and updates the documentation for these features.

Changes from v1:
- Update the typical minimum lifetime stated in the documentation, and
  make it a range to emphasize the variability
- Fix spelling of "determine" in the documentation
- Mention RFC 8981's requirements in the documentation
- Arrange variables in "reverse Christmas tree"
- Update documentation of what happens if temp_prefered_lft is less
  than the minimum required lifetime

Thanks to David, Paolo, and Dan for your feedback.
====================

Link: https://lore.kernel.org/r/20240214062711.608363-1-alexhenrie24@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

If the preferred lifetime was less than the minimum required lifetime,
ipv6_create_tempaddr would error out without creating any new address.
On my machine and network, this error happened immediately with the
preferred lifetime set to 5 seconds or less, after a few minutes with
the preferred lifetime set to 6 seconds, and not at all with the
preferred lifetime set to 7 seconds. During my investigation, I found a
Stack Exchange post from another person who seems to have had the same
problem: They stopped getting new addresses if they lowered the
preferred lifetime below 3 seconds, and they didn't really know why.

The preferred lifetime is a preference, not a hard requirement. The
kernel does not strictly forbid new connections on a deprecated address,
nor does it guarantee that the address will be disposed of the instant
its total valid lifetime expires. So rather than disable IPv6 privacy
extensions altogether if the minimum required lifetime swells above the
preferred lifetime, it is more in keeping with the user's intent to
increase the temporary address's lifetime to the minimum necessary for
the current network conditions.

With these fixes, setting the preferred lifetime to 5 or 6 seconds "just
works" because the extra fraction of a second is practically
unnoticeable. It's even possible to reduce the time before deprecation
to 1 or 2 seconds by setting /proc/sys/net/ipv6/conf/*/regen_min_advance
and /proc/sys/net/ipv6/conf/*/dad_transmits to 0. I realize that that is
a pretty niche use case, but I know at least one person who would gladly
sacrifice performance and convenience to be sure that they are getting
the maximum possible level of privacy.

Link: https://serverfault.com/a/1031168/310447Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In RFC 8981, REGEN_ADVANCE cannot be less than 2 seconds, and the RFC
does not permit the creation of temporary addresses with lifetimes
shorter than that:

> When processing a Router Advertisement with a
> Prefix Information option carrying a prefix for the purposes of
> address autoconfiguration (i.e., the A bit is set), the host MUST
> perform the following steps:

> 5.  A temporary address is created only if this calculated preferred
>     lifetime is greater than REGEN_ADVANCE time units.

However, some users want to change their IPv6 address as frequently as
possible regardless of the RFC's arbitrary minimum lifetime. For the
benefit of those users, add a regen_min_advance sysctl parameter that
can be set to below or above 2 seconds.

Link: https://datatracker.ietf.org/doc/html/rfc8981Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

RFC 8981 defines REGEN_ADVANCE as follows:

REGEN_ADVANCE = 2 + (TEMP_IDGEN_RETRIES * DupAddrDetectTransmits * RetransTimer / 1000)

Thus, allowing it to be less than 2 seconds is technically a protocol
violation.

Link: https://datatracker.ietf.org/doc/html/rfc8981#name-defined-protocol-parametersSigned-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for LEDs on i225/i226. The LEDs can be controlled via sysfs
from user space using the netdev trigger. The LEDs are named as
igc-<bus><device>-<led> to be easily identified.

Offloading link speed and activity are supported. Other modes are simulated
in software by using on/off. Tested on Intel i225.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240213184138.1483968-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The buffer_pg variable needs to hold an order-5 allocation (32 x
PAGE_SIZE) which, under memory pressure may fail to be allocated. Deal
with that error condition properly to avoid doing a NULL pointer
de-reference in the subsequent call to dma_map_page().

In addition, the err_reclaim_tx error label in bcmasp_netif_init() needs
to ensure that the TX NAPI object is properly deleted, otherwise
unregister_netdev() will spin forever attempting to test and clear
the NAPI_STATE_HASHED bit.

Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/20240213173339.3438713-1-florian.fainelli@broadcom.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

IS_ERR() is already using unlikely internally.
Signed-off-by: Kamal Heib <kheib@redhat.com>
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://lore.kernel.org/r/20240213161502.2297048-1-kheib@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Since commit d492cc25 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the mdio_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240213-bus_cleanup-mdio-v1-1-f9e799da7fda@marliere.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Consolidate the error paths of tipc_nl_bearer_add() under the common label
if the function holds rtnl_lock.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20240213134058.386123-1-syoshida@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add Aquantia AQR111 and AQR111B0 PHY ID. These PHY advertise 10G speed
but actually supports up to 5G speed, hence some manual fixup is needed.

The Aquantia AQR111B0 PHY is just a variant of the AQR111 with smaller
chip size.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240213133558.1836-1-ansuelsmth@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Since tcp_conn_request() always returns zero, there is no need to
keep the dead code. Remove it then.

Link: https://lore.kernel.org/netdev/CANn89iJwx9b2dUGUKFSV3PF=kN5o+kxz3A_fHZZsOS4AnXhBNw@mail.gmail.com/Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240213131205.4309-1-kerneljasonxing@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following batch contains Netfilter fixes for net:

1) Missing : in kdoc field in nft_set_pipapo.

2) Restore default DNAT behavior When a DNAT rule is configured via
   iptables with different port ranges, from Kyle Swenson.

3) Restore flowtable hardware offload for bidirectional flows
   by setting NF_FLOW_HW_BIDIRECTIONAL flag, from Felix Fietkau.

netfilter pull request 24-02-15

* tag 'nf-24-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: fix bidirectional offload regression
  netfilter: nat: restore default DNAT behavior
  netfilter: nft_set_pipapo: fix missing : in kdoc
====================

Link: https://lore.kernel.org/r/20240214233818.7946-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2024-02-14

this is a pull request of 3 patches for net/master.

the first patch is by Ziqi Zhao and targets the CAN J1939 protocol, it
fixes a potential deadlock by replacing the spinlock by an rwlock.

Oleksij Rempel's patch adds a missing spin_lock_bh() to prevent a
potential Use-After-Free in the CAN J1939's
setsockopt(SO_J1939_FILTER).

Maxime Jayat contributes a patch to fix the transceiver delay
compensation (TDCO) calculation, which is needed for higher CAN-FD bit
rates (usually 2Mbit/s).

* tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: netlink: Fix TDCO calculation using the old data bittiming
  can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
  can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
====================

Link: https://lore.kernel.org/r/20240214140348.2412776-1-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.

Fixes: 09c2d251 ("net-timestamp: add key to disambiguate concurrent datagrams")
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240213110428.1681540-1-vadfed@meta.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, we are checking whether the PHY package mode matches the
individual PHY interface modes at PHY package probe time, but at that time
we only know the PHY package mode and not the individual PHY interface
modes as of_get_phy_mode() that populates it will only get called once the
netdev to which PHY-s are attached to is being probed and thus this check
will always fail and return -EINVAL.

So, lets move this check to .config_init_once as at that point individual
PHY interface modes should be populated.

Fixes: d1cb613e ("net: phy: qcom: add support for QCA807x PHY Family")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240212115043.1725918-1-robimarko@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>