Merge tag 'berlin-core-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into next/soc

berlin core changes for v4.18

* tag 'berlin-core-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
  ARM: berlin: switch to SPDX license identifier
  arm: berlin: remove non-necessary flush_cache_all()
  ARM: berlin: extend BG2CD Kconfig entry
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.18/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

SoC changes for omap variants for v4.18 merge window

This series mostly adds saving of power and clock domain registers for
am335x/am437x suspend to RTC only mode. There is also a non-urgent fix
for omap4 PM where we could end up losing GPIO interrupts if bootloader
has LOGICRETSTATE cleared for domains. And there is a clean-up patch for
omap1 to use device properties for at24 eeprom.

* tag 'omap-for-v4.18/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
  ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
  ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: Add functions to save and restore powerdomain context
  ARM: OMAP2+: clockdomain: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: Add functions to save and restore clockdomain context en-masse.
  ARM: omap1: osk: use device properties for at24 eeprom
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.18/ti-sysc-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

One ti-sysc fix for v4.18 merge window

This fixes an array access errors if there are more optional clocks
than one.

* tag 'omap-for-v4.18/ti-sysc-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Fix optional clocks array access
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-core-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc

Allwinner core changes for 4.18

The A83t, unlike the other Allwinner SoCs, cannot use PSCI because of a
silicon bug. As such, we needed to have some smp_ops in order to bringup
the various cores (and clusters) found on this SoC.

* tag 'sunxi-core-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: sun8i: smp: Add support for A83T
  ARM: sun9i: smp: Add is_a83t field
  ARM: sun9i: smp: Rename clusters's power-off
  ARM: shmobile: Convert file to use cntvoff
  ARM: sunxi: Add initialization of CNTVOFF
  ARM: smp: Add initialization of CNTVOFF
  ARM: sunxi: smp: Move assembly code into a file
  ARM: Allow this header to be included by assembly files
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-soc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

i.MX SoC update for 4.18:
 - A series from Bartosz to convert all i.MX plaform code using
   at24_platform_data to use at24 eeprom generic device properties.
 - Enable pinctrl driver support for i.MX6SLL SoC.
 - Clean up i.MX platform code using spi_imx platform data on outdated
   documentation and chip select array usage.

* tag 'imx-soc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: select imx6sll pinctrl when imx6sll enabled
  ARM: imx: pcm037: use device properties for at24 eeprom
  ARM: imx: pca100: use device properties for at24 eeprom
  ARM: imx: pcm043: use device properties for at24 eeprom
  ARM: imx: vpr200: drop at24_platform_data
  ARM: imx: Update spi_imx platform data to reflect current state
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.18-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

ARM: tegra: Core changes for v4.18-rc1

Contains a single patch that instantiates a platform device for the CPU
frequency driver.

* tag 'tegra-for-4.18-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Create platform device for tegra20-cpufreq driver
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v4.18/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

DaVinci SoC support updates for v4.18

Mainly contains patches to move NAND chipselect to platform data
(currently platform device id is being used). These patches have
been acked by NAND maintainer and because of the driver dependency
an immutable branch has been provided to Boris.

The other patch is to remove an unnecessary postcore_initcall() on
DM644x which is needed for common clock framework conversion.

* tag 'davinci-for-v4.18/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: dm644x: remove unnecessary postcore_initcall()
  ARM: davinci: aemif: stop using pdev->id as nand chipselect
  mtd: rawnand: davinci: stop using pdev->id as chipselect
  ARM: davinci: neuros-osd2: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm646x-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: mityomapl138: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm644x-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm365-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm355-leopard: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm355-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: da850-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: da830-evm: specify the chipselect in davinci_nand_pdata
  mtd: rawnand: davinci: store the core chipselect number in platform data
Signed-off-by: Olof Johansson <olof@lixom.net>

Use the appropriate SPDX license identifier and drop the previous
boilerplate license text.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

I believe the flush_cache_all() after scu_enable() is to "Ensure that
the data accessed by CPU0 before the SCU was initialised is visible
to the other CPUs." as commented in scu_enable(). So here
flush_cache_all() is a duplication, remove it.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

BG2CD SoC uses r3p0 Cortex-A9 MPCore single-CPU cluster. Autoselect
pertinent errata, the SCU and the global timer, and allow use of the
local timer on uniprocessor kernels.

PL310 L2 cache controller has revision r3p2; no errata to select.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

We should be checking ddata->clocks[i] instead of clock_names[i]
for the optional clocks. Currently this just happens to work for
the typical case of one fck and one optional clock.

Fixes: 09dfe581 ("bus: ti-sysc: Add handling for clkctrl opt clocks")
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We may have LOGICRETSTATE cleared by the bootloader or kexec boot.

Currently this means we will see lost GPIO interrupts at least for
network interfaces such as wlcore and smsc911x if PER hits retention.

Let's fix the issue by making sure LOGICRETSTATE is set. Once we have
GPIOs working with wakeirqs then we should be able to clear it.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Inroduce cpu_pm notifiers for context save/restore. This will be
needed for am43xx family in case of rtc only mode with ddr in
self-refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

There are two registers on am43x needed for IO daisy chain wake to work
properly, however currently after an RTC+DDR cycle they are lost. We
must take care to save and restore these before and after entering RTC
mode otherwise IO daisy chain wake will stop working from DeepSleep
after resuming.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Inroduce cpu_pm notifiers for context save/restore. This is
needed for am43xx family during rtc only mode with ddr in
self-refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The powerdomain control registers are stored in the WKUP powerdomain on
AM33XX/AM43XX, which is lost on RTC-only suspend and also hibernate. This
adds context save and restore functions for those registers.
Sometimes the powerdomain state does not need to change,
perhaps we only need to change memory retention states, so make
sure the restored state is different from the current state before we wait
for a transition.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Inroduce cpu_pm notifiers for context save/restore. This will be
needed for am43xx family in case of rtc only mode with ddr in
self-refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Tegra20-cpufreq driver require a platform device in order to be loaded,
instantiate a simple platform device for the driver during of the machines
late initialization.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This is used to support suspend modes like RTC-only and hibernate where
the state of the registers controlling clockdomains is lost.
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'samsung-soc-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Samsung mach/soc changes for v4.18

1. Remove at24_platform_data in S3C2440.
2. Fix invalid SPDX identifier.
3. Remove Exynos5440 entirely.
4. Cleanups.
5. Remove static mapping of SCU SFR and rely on DTS.

* tag 'samsung-soc-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos: Remove unused soc_is_exynos{4,5}
  ARM: exynos: Remove static mapping of SCU SFR
  ARM: exynos: no need to select ARCH_HAS_BANDGAP any longer
  ARM: exynos: Remove support for Exynos5440
  ARM: s3c24xx: Fix invalid SPDX identifier
  ARM: samsung: simplify getting .drvdata
  ARM: s3c24xx: mini2440: Use device properties for at24 eeprom
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM-based machine/platform files
changes for 4.18, please pull the following:

- Doug updates arch/arm/include/asm/cpuinfo.h such that this header file
can be used by both C and assembly code. This particular change will
also be included in a Sunxi pull request to support A83T SMP support.

- Doug also updates our DEBUG_LL routine to support newer chips such as
7278 which have a version 7 memory map which moves the registers from
physical address 0xf000_0000 down to 0x0800_0000. This requires us to
look up the processor MIDR and determine the base address from the
PERIPHBASE register.

- Florian updates the Brahma-B15 read-ahead cache implementation such
that it works on the Brahma-B53 CPUs, which also have an identical
read-ahead cache implementation, with a different set of offsets. He
also provides the Brahma-B15 MIDR definition such that it can be used by
other pieces of code in the future.

* tag 'arm-soc/for-4.18/soc' of https://github.com/Broadcom/stblinux:
  ARM: brcmstb: Add support for the V7 memory map
  ARM: add Broadcom Brahma-B15 main ID definition
  ARM: add Broadcom Brahma-B53 main ID definition
  ARM: Allow this header to be included by assembly files
  ARM: B15: Update to support Brahma-B53
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

ti-sysc driver related changes for omap variants

This series improves the ti-sysc interconnect target module driver to
the point where a most of SoC can be booted with interconnect target
module data configured in device tree instead of legacy platform data.
The related device tree changes need some more work though, and can
wait for v4.19. Also some drivers using nested interconnects like DSS
need more work.

We can now remove the unused pm-noop code that is not doing anything
any longer. And we can now initialize things for PM and display pdata
later to prepare things for using ti-sysc driver.

We also need to add  some more quirk handling so we can boot both with
platform data and dts data.

* tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Show module information for suspend if DEBUG is enabled
  bus: ti-sysc: Tag sdio and wdt with legacy mode for suspend
  bus: ti-sysc: Detect UARTs for SYSC_QUIRK_LEGACY_IDLE quirk on omap4
  bus: ti-sysc: Detect omap4 type timers for quirk
  bus: ti-sysc: Add initial support for external resets
  bus: ti-sysc: Improve suspend and resume handling
  bus: ti-sysc: Tag some modules resource providers for noirq suspend
  bus: ti-sysc: Add handling for clkctrl opt clocks
  bus: ti-sysc: Make child clock alias handling more generic
  bus: ti-sysc: Handle simple-bus for nested children
  ARM: OMAP2+: Make display related init into device_initcall
  ARM: OMAP2+: Initialize SoC PM later
  ARM: OMAP2+: Only probe SDMA via ti-sysc if configured in dts
  ARM: OMAP2+: Use signed value for sysc register offsets
  ARM: OMAP2+: Allow using ti-sysc for system timers
  ARM: OMAP2+: Drop unused pm-noop
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch select DMA, DMAMUX and MDMA support for STM32MP157C machine.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-machine-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc

These changes for ux500:
- Drops U8540 and U9540
- Cuts down the Kconfig options due to accumulated simplifications

* tag 'ux500-machine-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: Cut down Kconfig options
  ARM: ux500: Drop U8540/9540 support
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull x86/pti updates from Thomas Gleixner:
 "A mixed bag of fixes and updates for the ghosts which are hunting us.

  The scheduler fixes have been pulled into that branch to avoid
  conflicts.

   - A set of fixes to address a khread_parkme() race which caused lost
     wakeups and loss of state.

   - A deadlock fix for stop_machine() solved by moving the wakeups
     outside of the stopper_lock held region.

   - A set of Spectre V1 array access restrictions. The possible
     problematic spots were discuvered by Dan Carpenters new checks in
     smatch.

   - Removal of an unused file which was forgotten when the rest of that
     functionality was removed"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Remove unused file
  perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
  perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
  perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
  perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
  perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
  sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
  sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
  sched/core: Introduce set_special_state()
  kthread, sched/wait: Fix kthread_parkme() completion issue
  kthread, sched/wait: Fix kthread_parkme() wait-loop
  sched/fair: Fix the update of blocked load when newly idle
  stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock

Pull scheduler fix from Thomas Gleixner:
 "Revert the new NUMA aware placement approach which turned out to
  create more problems than it solved"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()"

Pull perf tooling fixes from Thomas Gleixner:
 "Another small set of perf tooling fixes and updates:

   - Revert "perf pmu: Fix pmu events parsing rule", as it broke Intel
     PT event description parsing (Arnaldo Carvalho de Melo)

   - Sync x86's cpufeatures.h and kvm UAPI headers with the kernel
     sources, suppressing the ABI drift warnings (Arnaldo Carvalho de
     Melo)

   - Remove duplicated entry for westmereep-dp in Intel's mapfile.csv
     (William Cohen)

   - Fix typo in 'perf bench numa' options description (Yisheng Xie)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "perf pmu: Fix pmu events parsing rule"
  tools headers kvm: Sync ARM UAPI headers with the kernel sources
  tools headers kvm: Sync uapi/linux/kvm.h with the kernel sources
  tools headers: Sync x86 cpufeatures.h with the kernel sources
  perf vendor events intel: Remove duplicated entry for westmereep-dp in mapfile.csv
  perf bench numa: Fix typo in options

Pull dma-mapping fix from Christoph Hellwig:
 "Just one little fix from Jean to avoid a harmless but very annoying
  warning, especially for the drm code"

* tag 'dma-mapping-4.17-5' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: silent unwanted warning "buffer is full"

As no more user of soc_is_exynos{4,5} we can safely remove them.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Lets remove static mapping of SCU SFR mainly used in CORTEX-A9 SoC based
boards. Instead use mapping from device tree node of SCU.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
[mszyprow: rebased, added fallback to scu_a9_get_base() when no SCU DT
 node is available, removed compatibility break warning, fixed non-SMP
 build, keep SCU base mapping to avoid issues with calls from CPUidle]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Pull cifs fixes from Steve French:
 "Some small SMB3 fixes for 4.17-rc5, some for stable"

* tag '4.17-rc4-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: directory sync should not return an error
  cifs: smb2ops: Fix listxattr() when there are no EAs
  cifs: smbd: Enable signing with smbdirect
  cifs: Allocate validate negotiation request through kmalloc

Pull thermal fixes from Zhang Rui:

 - fix NULL pointer dereference on module load/probe for int3403_thermal
   driver

 - fix an emergency shutdown issue on exynos thermal driver

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: exynos: Propagate error value from tmu_read()
  thermal: exynos: Reading temperature makes sense only when TMU is turned on
  thermal: int3403_thermal: Fix NULL pointer deref on module load / probe

Pull block fixes from Jens Axboe:
 "Just a few NVMe fixes this round - one fixing a use-after-free, one
  fixes the return value after controller reset, and the last one fixes
  an issue where some drives will spuriously EIO. We should get these
  into 4.17"

* tag 'for-linus-20180511' of git://git.kernel.dk/linux-block:
  nvme: add quirk to force medium priority for SQ creation
  nvme: Fix sync controller reset return
  nvme: fix use-after-free in nvme_free_ns_head

If DMA_ATTR_NO_WARN is passed to swiotlb_alloc_buffer(), it should be
passed further down to swiotlb_tbl_map_single(). Otherwise we escape
half of the warnings but still log the other half.

This is one of the multiple causes of spurious warnings reported at:
https://bugs.freedesktop.org/show_bug.cgi?id=104082Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 0176adb0 ("swiotlb: refactor coherent buffer allocation")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org # v4.16

This reverts commit 7347fc87.

Srikar Dronamra pointed out that while the commit in question did show
a performance improvement on ppc64, it did so at the cost of disabling
active CPU migration by automatic NUMA balancing which was not the intent.
The issue was that a serious flaw in the logic failed to ever active balance
if SD_WAKE_AFFINE was disabled on scheduler domains. Even when it's enabled,
the logic is still bizarre and against the original intent.

Investigation showed that fixing the patch in either the way he suggested,
using the correct comparison for jiffies values or introducing a new
numa_migrate_deferred variable in task_struct all perform similarly to a
revert with a mix of gains and losses depending on the workload, machine
and socket count.

The original intent of the commit was to handle a problem whereby
wake_affine, idle balancing and automatic NUMA balancing disagree on the
appropriate placement for a task. This was particularly true for cases where
a single task was a massive waker of tasks but where wake_wide logic did
not apply.  This was particularly noticeable when a futex (a barrier) woke
all worker threads and tried pulling the wakees to the waker nodes. In that
specific case, it could be handled by tuning MPI or openMP appropriately,
but the behavior is not illogical and was worth attempting to fix. However,
the approach was wrong. Given that we're at rc4 and a fix is not obvious,
it's better to play safe, revert this commit and retry later.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: efault@gmx.de
Cc: ggherdovich@suse.cz
Cc: hpa@zytor.com
Cc: matt@codeblueprint.co.uk
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/20180509163115.6fnnyeg4vdm2ct4v@techsingularity.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge misc fixes from Andrew Morton:
 "13 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  rbtree: include rcu.h
  scripts/faddr2line: fix error when addr2line output contains discriminator
  ocfs2: take inode cluster lock before moving reflinked inode from orphan dir
  mm, oom: fix concurrent munlock and oom reaper unmap, v3
  mm: migrate: fix double call of radix_tree_replace_slot()
  proc/kcore: don't bounds check against address 0
  mm: don't show nr_indirectly_reclaimable in /proc/vmstat
  mm: sections are not offlined during memory hotremove
  z3fold: fix reclaim lock-ups
  init: fix false positives in W+X checking
  lib/find_bit_benchmark.c: avoid soft lockup in test_find_first_bit()
  KASAN: prohibit KASAN+STRUCTLEAK combination
  MAINTAINERS: update Shuah's email address

Since commit c1adf200 ("Introduce rb_replace_node_rcu()")
rbtree_augmented.h uses RCU related data structures but does not include
the header file.  It works as long as it gets somehow included before
that and fails otherwise.

Link: http://lkml.kernel.org/r/20180504103159.19938-1-bigeasy@linutronix.deSigned-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When addr2line output contains discriminator, the current awk script
cannot parse it.  This patch fixes it by extracting key words using
regex which is more reliable.

  $ scripts/faddr2line vmlinux tlb_flush_mmu_free+0x26
  tlb_flush_mmu_free+0x26/0x50:
  tlb_flush_mmu_free at mm/memory.c:258 (discriminator 3)
  scripts/faddr2line: eval: line 173: unexpected EOF while looking for matching `)'

Link: http://lkml.kernel.org/r/1525323379-25193-1-git-send-email-changbin.du@intel.com
Fixes: 6870c016 ("scripts/faddr2line: show the code context")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>