- 04 Aug, 2023 2 commits
-
-
Horia Geanta authored
Add support for suspend and resume operation for PM in CAAM driver. When the CAAM goes in suspend, the hardware is considered to do nothing. On some platforms, the power of the CAAM is not turned off so it keeps its configuration. On other platforms, it doesn't so it is necessary to save the state of the CAAM: - JRs MID - Address of input and output rings Signed-off-by:
Horia Geanta <horia.geanta@nxp.com> Signed-off-by:
Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by:
Dan Douglass <dan.douglass@nxp.com> Signed-off-by:
Vipul Kumar <vipul_kumar@mentor.com> Signed-off-by:
Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by:
Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by:
Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Franck LENORMAND authored
The structure partid is not suitable to represent the DECO MID register. This patch replace partid by masterid which is more appropriate. Signed-off-by:
-
- 28 Jul, 2023 10 commits
-
-
Christophe JAILLET authored
On memory allocation failure, the function calling stack is already logged. So there is no need to explicitly log an extra message. Remove them, ans simplify some code accordingly. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Christophe JAILLET authored
Use struct_size() instead of hand-writing it, when allocating a structure with a flex array. This is less verbose, more robust and more informative. Signed-off-by:
-
Martin Kaiser authored
Use dev_err_probe in error paths of the probe function, making the code a tiny bit simpler. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Signed-off-by:
-
Martin Kaiser authored
The remove function is empty, we can delete it. It's ok for a PCI driver to have no remove function. Signed-off-by:
-
Martin Kaiser authored
Use dev_err_probe in error paths to make the code a bit shorter. Signed-off-by:
-
Martin Kaiser authored
cc_trng_clk_init is called only from the probe function. Merge the two functions, this saves some lines of code. Signed-off-by:
-
Martin Kaiser authored
Call devm_clk_get_optional_enabled in the cctrng driver. We don't have to disable and unprepare the clock any more in error paths or in the remove function. Signed-off-by:
-
Martin Kaiser authored
Do not open code the init and exit functions of the cctrng driver. If we move the BUILD_BUG_ON checks into the probe function, we can use module_platform_driver and make the code shorter. Signed-off-by:
-
Mahmoud Adam authored
key might contain private part of the key, so better use kfree_sensitive to free it Signed-off-by:
Mahmoud Adam <mngyadam@amazon.com> Signed-off-by:
-
Jia Jie Ho authored
Adding AES skcipher and aead support to Starfive crypto module. Skcipher modes of operation include ecb, cbc, ctr, ofb, cfb. Aead modes include ccm and gcm. v1->v2: - Add include interrupt.h to fix compile error. (Herbert) Co-developed-by:
Huan Feng <huan.feng@starfivetech.com> Signed-off-by:
Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by:
-
- 22 Jul, 2023 23 commits
-
-
Martin Kaiser authored
Don't set drvdata, there's nobody who reads it. Signed-off-by:
-
Eric Biggers authored
The 'tfm' parameter to aes_set_key_common() is never used, so remove it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Weili Qian authored
Enable sva error interrupt event. When an error occurs on the sva module, the device reports an abnormal interrupt to the driver. Signed-off-by:
Weili Qian <qianweili@huawei.com> Signed-off-by:
-
Weili Qian authored
When both the accelerator device and SMMU are busy, the processing time of the doorbell may be prolonged. As a result, the doorbell may timeout, especially in the sva scenario. Therefore, the doorbell timeout is increased. Signed-off-by:
-
Weili Qian authored
When the system is shut down, the process is killed, but the accelerator device does not stop executing the tasks. If the accelerator device still accesses the memory and writes back data to the memory after the memory is reclaimed by the system, an NFE error may occur. Therefore, before the system is shut down, the driver needs to stop the device and write data back to the memory. Signed-off-by:
-
Weili Qian authored
Before removing the driver, flush inter-function communication work, and subsequent communication work is not processed. This prevents communication threads from accessing released memory. Fixes: ("crypto: hisilicon/qm - enable PF and VFs communication") Signed-off-by: -
Thomas Bourgoin authored
Remove flag HASH_FLAGS_DMA_READY as it can put the driver in a deadlock state. If the DMA automatically set the DCAL bit, the interrupt indicating the end of a computation can be raised before the DMA complete sequence. Signed-off-by:
Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by:
-
Thomas Bourgoin authored
If IP has MDMAT support, set or reset the bit MDMAT in Control Register. Fixes: b56403a2 ("crypto: stm32/hash - Support Ux500 hash") Cc: stable@vger.kernel.org Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Bourgoin authored
When we are sending the data to HASH with the DMA, we send all the data provided in the scatterlists of the request. But in some cases (ex : tcrypt performances tests), we should only send req->nbytes When iterating through the scatterlist we verify if it is the last scatterlist or if the number of bytes sent plus the data of the current scatterlist is superior of the total number of bytes to hash. Signed-off-by:
-
Thomas Bourgoin authored
We were reading the length of the scatterlist sg after copying value of tsg inside. So we are using the size of the previous scatterlist and for the first one we are using an unitialised value. Fix this by copying tsg in sg[0] before reading the size. Fixes : 8a1012d3 ("crypto: stm32 - Support for STM32 HASH module") Cc: stable@vger.kernel.org Signed-off-by:
-
Thomas Bourgoin authored
Commit "crypto: stm32 - Fix empty message processing" remove the use of the argument bufcnt in stm32_hash_write_ctrl. Hence, we can remove it from the function prototype and simplify the function declaration. Signed-off-by:
-
Thomas Bourgoin authored
Add the all SHA-2 (up to 512) and SHA-3 algorithm support. Update compatible table to add stm32mp13. Signed-off-by:
-
Lionel Debieve authored
Add a new compatible for stm32mp13 support. Signed-off-by:
Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Martin Kaiser authored
Use dev_err_probe to print the error message after a failed hwrng registration. Signed-off-by:
-
Martin Kaiser authored
We have no device-specific data for silex-insight,ba431-rng. There's no need to set .data = NULL, this is the default. Signed-off-by:
-
Martin Kaiser authored
Do not set drvdata in the ba431 driver. Nobody is using it. Signed-off-by:
-
Martin Kaiser authored
Call devm_hwrng_register for device managed registration of the ingenic-trng driver. ingenic_trng_remove can then be deleted. Signed-off-by:
-
Martin Kaiser authored
There's no need to disable the rng in ingenic_trng_remove. The driver's init function sets the CFG_GEN_EN bit to enable the rng. The cleanup function clears CFG_GEN_EN to revert this. The remove function calls hwrng_unregister. If the ingenic-trng is not the current rng at this point, CFG_GEN_EN has already been cleared. If the ingenic-trng is the current rng, drop_current_rng will call the cleanup function. Signed-off-by:
-
Martin Kaiser authored
Use dev_err_probe in error paths to make the code a bit shorter. Signed-off-by:
-
Martin Kaiser authored
Use devm_clk_get_enabled in the ingenic-trng driver. We don't have to disable and unprepare the clock any more in error paths or in the remove function. Signed-off-by:
-
Martin Kaiser authored
Don't assign a value to ret if we're about to return from the probe function and ret's value is not used. Signed-off-by:
-
Martin Kaiser authored
Remove two defines which are not used in the ingenic-trng driver's code. Signed-off-by:
-
Martin Kaiser authored
Enable compile testing for the ingenic-trng driver. Remove the dependency on HW_RANDOM. The ingenic-trng config section is under "if HW_RANDOM". Signed-off-by:
-
- 20 Jul, 2023 5 commits
-
-
Weili Qian authored
The private key of the curve key size generated by stdrng, which maybe not less than n. Therefore, the private key with the curve key size minus 1 is generated to ensure that the private key is less than n. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Yangtao Li <frank.li@vivo.com> Reviewed-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
