- 06 Aug, 2018 5 commits
-
-
Anton Vasilyev authored
[ Upstream commit b0753408 ] mdio_mux_iproc_probe() uses platform_set_drvdata() to store md pointer in device, whereas mdio_mux_iproc_remove() restores md pointer by dev_get_platdata(&pdev->dev). This leads to wrong resources release. The patch replaces getter to platform_get_drvdata. Fixes: 98bc865a ("net: mdio-mux: Add MDIO mux driver for iProc SoCs") Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Wahren authored
[ Upstream commit 136f55f6 ] As long the bh tasklet isn't scheduled once, no packet from the rx path will be handled. Since the tx path also schedule the same tasklet this situation only persits until the first packet transmission. So fix this issue by scheduling the tasklet after link reset. Link: https://github.com/raspberrypi/linux/issues/2617 Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Suggested-by: Floris Bos <bos@je-eigen-domein.nl> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
tangpengpeng authored
[ Upstream commit 7f3fc7dd ] If we enable or disable xgbe flow-control by ethtool , it does't work.Because the parameter is not properly assigned,so we need to adjust the assignment order of the parameters. Fixes: c1ce2f77 ("amd-xgbe: Fix flow control setting logic") Signed-off-by: tangpengpeng <tangpengpeng@higon.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gal Pressman authored
[ Upstream commit 101f0cd4 ] UBSAN triggers the following undefined behaviour warnings: [...] [ 13.236124] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:468:22 [ 13.240043] shift exponent 64 is too large for 64-bit type 'long long unsigned int' [...] [ 13.744769] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:373:4 [ 13.748694] shift exponent 64 is too large for 64-bit type 'long long unsigned int' [...] When splitting the address to high and low, GENMASK_ULL is used to generate a bitmask with dma_addr_bits field from io_sq (in ena_com_prepare_tx and ena_com_add_single_rx_desc). The problem is that dma_addr_bits is not initialized with a proper value (besides being cleared in ena_com_create_io_queue). Assign dma_addr_bits the correct value that is stored in ena_dev when initializing the SQ. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Gal Pressman <pressmangal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lorenzo Bianconi authored
[ Upstream commit 9fc12023 ] Remove BUG_ON() from fib_compute_spec_dst routine and check in_dev pointer during flowi4 data structure initialization. fib_compute_spec_dst routine can be run concurrently with device removal where ip_ptr net_device pointer is set to NULL. This can happen if userspace enables pkt info on UDP rx socket and the device is removed while traffic is flowing Fixes: 35ebf65e ("ipv4: Create and use fib_compute_spec_dst() helper") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 03 Aug, 2018 35 commits
-
-
Greg Kroah-Hartman authored
-
Michal Vokáč authored
commit 9bb2289f upstream. Implement adjust_link function that allows to overwrite default CPU port setting using fixed-link device tree subnode. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Vokáč authored
commit 218bbea1 upstream. Add support for the four-port variant of the Qualcomm QCA833x switch. The CPU port default link settings can be reconfigured using a fixed-link sub-node. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Vokáč authored
commit eee1fe64 upstream. When a port is brought up/down do not enable/disable only the TXMAC but the RXMAC as well. This is essential for the CPU port to work. Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Vokáč authored
commit 79a4ed4f upstream. By default autonegotiation is enabled to configure MAC on all ports. For the CPU port autonegotiation can not be used so we need to set some sensible defaults manually. This patch forces the default setting of the CPU port to 1000Mbps/full duplex which is the chip maximum capability. Also correct size of the bit field used to configure link speed. Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leon Romanovsky authored
commit 940efcc8 upstream. Flows can be created on UD and RAW_PACKET QP types. Attempts to provide other QP types as an input causes to various unpredictable failures. The reason is that in order to support all various types (e.g. XRC), we are supposed to use real_qp handle and not qp handle and expect to driver/FW to fail such (XRC) flows. The simpler and safer variant is to ban all QP types except UD and RAW_PACKET, instead of relying on driver/FW. Cc: <stable@vger.kernel.org> # 3.11 Fixes: 436f2ad0 ("IB/core: Export ib_create/destroy_flow through uverbs") Cc: syzkaller <syzkaller@googlegroups.com> Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit 8d5a803c upstream. With commit 044e6e3d: "ext4: don't update checksum of new initialized bitmaps" the buffer valid bit will get set without actually setting up the checksum for the allocation bitmap, since the checksum will get calculated once we actually allocate an inode or block. If we are doing this, then we need to (re-)check the verified bit after we take the block group lock. Otherwise, we could race with another process reading and verifying the bitmap, which would then complain about the checksum being invalid. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit 362eca70 upstream. The inline data code was updating the raw inode directly; this is problematic since if metadata checksums are enabled, ext4_mark_inode_dirty() must be called to update the inode's checksum. In addition, the jbd2 layer requires that get_write_access() be called before the metadata buffer is modified. Fix both of these problems. https://bugzilla.kernel.org/show_bug.cgi?id=200443Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit 01cfb793 upstream. Anatoly Trosinenko reports that a corrupted squashfs image can cause a kernel oops. It turns out that squashfs can end up being confused about negative fragment lengths. The regular squashfs_read_data() does check for negative lengths, but squashfs_read_metadata() did not, and the fragment size code just blindly trusted the on-disk value. Fix both the fragment parsing and the metadata reading code. Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit 81e69df3 upstream. Fedora has integrated the jitter entropy daemon to work around slow boot problems, especially on VM's that don't support virtio-rng: https://bugzilla.redhat.com/show_bug.cgi?id=1572944 It's understandable why they did this, but the Jitter entropy daemon works fundamentally on the principle: "the CPU microarchitecture is **so** complicated and we can't figure it out, so it *must* be random". Yes, it uses statistical tests to "prove" it is secure, but AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with flying colors. So if RDRAND is available, mix it into entropy submitted from userspace. It can't hurt, and if you believe the NSA has backdoored RDRAND, then they probably have enough details about the Intel microarchitecture that they can reverse engineer how the Jitter entropy daemon affects the microarchitecture, and attack its output stream. And if RDRAND is in fact an honest DRNG, it will immeasurably improve on what the Jitter entropy daemon might produce. This also provides some protection against someone who is able to read or set the entropy seed file. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
José Roberto de Souza authored
[ Upstream commit 4f212e40 ] To comply with eDP1.4a this bit should be set when enabling PSR2. Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-1-jose.souza@intel.comSigned-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mauro Carvalho Chehab authored
[ Upstream commit 90db5c82 ] The annotations there are wrong as warned: drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: warning: incorrect type in assignment (different base types) drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: expected unsigned short [unsigned] [short] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: got restricted __be16 [usertype] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shivasharan S authored
[ Upstream commit 3239b8cd ] Hardware could time out Fastpath IOs one second earlier than the timeout provided by the host. For non-RAID devices, driver provides timeout value based on OS provided timeout value. Under certain scenarios, if the OS provides a timeout value of 1 second, due to above behavior hardware will timeout immediately. Increase timeout value for non-RAID fastpath IOs by 1 second. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xose Vazquez Perez authored
[ Upstream commit 37b37d26 ] SGI/TP9100 is not an RDAC array: ^^^ https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=blob;f=libmultipath/hwtable.c;h=88b4700beb1d8940008020fbe4c3cd97d62f4a56;hb=HEAD#l235 This partially reverts commit 35204772 ("[SCSI] scsi_dh_rdac : Consolidate rdac strings together") [mkp: fixed up the new entries to align with rest of struct] Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: DM ML <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Suman Anna authored
[ Upstream commit b7e1e685 ] The OMAP3 ISP driver manages its MMU mappings through the IOMMU-aware ARM DMA backend. The current code creates a dma_iommu_mapping and attaches this to the ISP device, but never detaches the mapping in either the probe failure paths or the driver remove path resulting in an unbalanced mapping refcount and a memory leak. Fix this properly. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Suman Anna <s-anna@ti.com> Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tudor-Dan Ambarus authored
[ Upstream commit ad2fdcdf ] In crypto_authenc_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tudor-Dan Ambarus authored
[ Upstream commit 31545df3 ] In crypto_authenc_esn_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dominik Bozek authored
[ Upstream commit 5d111f51 ] wait_for_connected() wait till a port change status to USB_PORT_STAT_CONNECTION, but this is not possible if the port is unpowered. The loop will only exit at timeout. Such case take place if an over-current incident happen while system is in S3. Then during resume wait_for_connected() will wait 2s, which may be noticeable by the user. Signed-off-by: Dominik Bozek <dominikx.bozek@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Simek authored
[ Upstream commit ece97f3a ] simpleImage generation was broken for some time. This patch is fixing steps how simpleImage.*.ub file is generated. Steps are objdump of vmlinux and create .ub. Also make sure that there is striped elf version with .strip suffix. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Douglas Anderson authored
[ Upstream commit c1c734cb ] As part of bringup I ended up wanting to call an earlycon driver by a name that was exactly 16-bytes big, specifically "qcom_geni_serial". Unfortunately, when I tried this I found that things compiled just fine. They just didn't work. Specifically the compiler felt perfectly justified in initting the ".name" field of "struct earlycon_id" with the full 16-bytes and just skipping the '\0'. Needless to say, that behavior didn't seem ideal, but I guess someone must have allowed it for a reason. One way to fix this is to shorten the name field to 15 bytes and then add an extra byte after that nobody touches. This should always be initted to 0 and we're golden. There are, of course, other ways to fix this too. We could audit all the users of the "name" field and make them stop at both null termination or at 16 bytes. We could also just make the name field much bigger so that we're not likely to run into this. ...but both seem like we'll just hit the bug again. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
NeilBrown authored
[ Upstream commit d8caf662 ] ldlm_lock_create() gets a resource, but don't put it on all failure paths. It should. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Simmons authored
[ Upstream commit 1b60f6df ] In ll_xattr_set_common() detect the removexattr() case correctly by testing for a NULL value as well as XATTR_REPLACE. Signed-off-by: John L. Hammond <john.hammond@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10787 Reviewed-on: https://review.whamcloud.com/Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by: James Simmons <uja.ornl@yahoo.com> Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ondrej Mosnáček authored
[ Upstream commit 23bcc480 ] Current implementation of auditing by executable name only implements the 'equal' operator. This patch extends it to also support the 'not equal' operator. See: https://github.com/linux-audit/audit-kernel/issues/53Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Siva Rebbagondla authored
[ Upstream commit 78e45071 ] While performing cleanup, driver is messing with card->ocr value by not masking rocr against ocr_avail. Below panic is observed with some of the SDIO host controllers due to this. Issue is resolved by reverting incorrect modifications to vdd. [ 927.423821] mmc1: Invalid vdd 0x1f [ 927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic [ 927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000-caracalla #1 [ 927.424075] Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.06 01/22/2018 [ 927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci] [ 927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS: 00010282 [ 927.424107] Call Trace: [ 927.424118] sdhci_set_power+0x5a/0x60 [sdhci] [ 927.424125] sdhci_set_ios+0x360/0x3b0 [sdhci] [ 927.424133] mmc_set_initial_state+0x92/0x120 [ 927.424137] mmc_power_up.part.34+0x33/0x1d0 [ 927.424141] mmc_power_up+0x17/0x20 [ 927.424147] mmc_sdio_runtime_resume+0x2d/0x50 [ 927.424151] mmc_runtime_resume+0x17/0x20 [ 927.424156] __rpm_callback+0xc4/0x200 [ 927.424161] ? idr_alloc_cyclic+0x57/0xd0 [ 927.424165] ? mmc_runtime_suspend+0x20/0x20 [ 927.424169] rpm_callback+0x24/0x80 [ 927.424172] ? mmc_runtime_suspend+0x20/0x20 [ 927.424176] rpm_resume+0x4b3/0x6c0 [ 927.424181] __pm_runtime_resume+0x4e/0x80 [ 927.424188] driver_probe_device+0x41/0x490 [ 927.424192] __driver_attach+0xdf/0xf0 [ 927.424196] ? driver_probe_device+0x490/0x490 [ 927.424201] bus_for_each_dev+0x6c/0xc0 [ 927.424205] driver_attach+0x1e/0x20 [ 927.424209] bus_add_driver+0x1f4/0x270 [ 927.424217] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424221] driver_register+0x60/0xe0 [ 927.424227] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.424231] sdio_register_driver+0x20/0x30 [ 927.424237] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Novakovic authored
[ Upstream commit 300eec7c ] ic_nameservers, which stores the list of name servers discovered by ipconfig, is initialised (i.e. has all of its elements set to NONE, or 0xffffffff) by ic_nameservers_predef() in the following scenarios: - before the "ip=" and "nfsaddrs=" kernel command line parameters are parsed (in ip_auto_config_setup()); - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in order to clear any values that may have been set after parsing "ip=" or "nfsaddrs=" and are no longer needed. This means that ic_nameservers_predef() is not called when neither "ip=" nor "nfsaddrs=" is specified on the kernel command line. In this scenario, every element in ic_nameservers remains set to 0x00000000, which is indistinguishable from ANY and causes pnp_seq_show() to write the following (bogus) information to /proc/net/pnp: #MANUAL nameserver 0.0.0.0 nameserver 0.0.0.0 nameserver 0.0.0.0 This is potentially problematic for systems that blindly link /etc/resolv.conf to /proc/net/pnp. Ensure that ic_nameservers is also initialised when neither "ip=" nor "nfsaddrs=" are specified by calling ic_nameservers_predef() in ip_auto_config(), but only when ip_auto_config_setup() was not called earlier. This causes the following to be written to /proc/net/pnp, and is consistent with what gets written when ipconfig is configured manually but no name servers are specified on the kernel command line: #MANUAL Signed-off-by: Chris Novakovic <chris@chrisn.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luc Van Oostenryck authored
[ Upstream commit 2ea00909 ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it. Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid(). Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.comSigned-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Enric Balletbo i Serra authored
[ Upstream commit 7c8b77f8 ] Heiko Stübner justified pretty well the change in commit e330eb86 ("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This change is also needed for arm64 rockchip boards, so, do the same for arm64. The io-domain driver is necessary to notify the soc about voltages changes happening on supplying regulators. Probably the most important user right now is the mmc tuning code, where the soc needs to get notified when the voltage is dropped to the 1.8V point. As this option is necessary to successfully tune UHS cards etc, it should get built in. Otherwise, tuning will fail with, dwmmc_rockchip fe320000.dwmmc: All phases bad! mmc0: tuning execution failed: -5 Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Osipenko authored
[ Upstream commit 1c74d5c0 ] Currently we are enabling handling of interrupts specific to Tegra124+ which happen to overlap with previous generations. Let's specify interrupts mask per SoC generation for consistency and in a preparation of squashing of Tegra20 driver into the common one that will enable handling of GART faults which may be undesirable by newer generations. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Osipenko authored
[ Upstream commit bf3fbdfb ] The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the mask to the interrupt status and don't handle interrupts that MC driver haven't asked for. Kernel would disable spurious MC IRQ and report the error. This would happen only in a case of a very severe bug. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
[ Upstream commit de5b55c1 ] Use raw-locks in stop_machine() to allow locking in irq-off and preempt-disabled regions on -RT. This also documents the possible locking context in general. [bigeasy: update patch description.] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/20180423191635.6014-1-bigeasy@linutronix.deSigned-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yixun Lan authored
[ Upstream commit 7e5d05e1 ] We need to introduce a new compatible name for the Meson-AXG SoC in order to support the RMII 100M ethernet PHY, since the PRG_ETH0 register of the dwmac glue layer is changed from previous old SoC. Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Blumenstingl authored
[ Upstream commit 03d9fbc3 ] The Meson8m2 SoC is a variant of Meson8 with some updates from Meson8b (such as the Gigabit capable DesignWare MAC). It is mostly pin compatible with Meson8, only 10 (existing) CBUS pins get an additional function (four of these are Ethernet RXD2, RXD3, TXD2 and TXD3 which are required when the board uses an RGMII PHY). The AOBUS pins seem to be identical on Meson8 and Meson8m2. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tobin C. Harding authored
[ Upstream commit 486e6661 ] The use of stack Variable Length Arrays needs to be avoided, as they can be a vector for stack exhaustion, which can be both a runtime bug (kernel Oops) or a security flaw (overwriting memory beyond the stack). Also, in general, as code evolves it is easy to lose track of how big a VLA can get. Thus, we can end up having runtime failures that are hard to debug. As part of the directive[1] to remove all VLAs from the kernel, and build with -Wvla. Currently driver is using a VLA declared using the number of descriptors. This array is used to store integer values and is later used as an argument to `gpiod_set_array_value_cansleep()` This can be avoided by using `kmalloc_array()` to allocate memory for the array of integer values. Memory is free'd before return from function. >From the code it appears that it is safe to sleep so we can use GFP_KERNEL (based _cansleep() suffix of function `gpiod_set_array_value_cansleep()`. It can be expected that this patch will result in a small increase in overhead due to the use of `kmalloc_array()` [1] https://lkml.org/lkml/2018/3/7/621Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shawn Lin authored
[ Upstream commit ff178981 ] Respect the actual clock for mmc debugfs to help better debug the hardware. mmc_host mmc0: Bus speed (slot 0) = 135475200Hz (slot req 150000000Hz, actual 135475200HZ div = 0) cat /sys/kernel/debug/mmc0/ios clock: 150000000 Hz actual clock: 135475200 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 3 (8 bits) timing spec: 9 (mmc HS200) signal voltage: 0 (1.80 V) driver type: 0 (driver type B) Cc: Xiao Yao <xiaoyao@rock-chips.com> Cc: Ziyuan <xzy.xu@rock-chips.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Sakamoto authored
[ Upstream commit 8e142e9e ] DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but tlv.h is not included. This causes build failure when local macro is defined by comment-out. This commit fixes the bug. At the same time, the alias macro is replaced with a destination macro added at a commit 46e860f7 ("ALSA: rename TLV-related macros so that they're friendly to user applications") Reported-by: Connor McAdams <conmanx360@gmail.com> Fixes: 44f0c978 ('ALSA: hda/ca0132: Add tuning controls') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-