- 02 Aug, 2006 25 commits
-
-
Wei Dong authored
When I tested Linux kernel 2.6.17.7 about statistics "ipv6IfStatsInHdrErrors", found that this counter couldn't increase correctly. The criteria is RFC2465: ipv6IfStatsInHdrErrors OBJECT-TYPE SYNTAX Counter3 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams discarded due to errors in their IPv6 headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IPv6 options, etc." ::= { ipv6IfStatsEntry 2 } When I send TTL=0 and TTL=1 a packet to a router which need to be forwarded, router just sends an ICMPv6 message to tell the sender that TIME_EXCEED and HOPLIMITS, but no increments for this counter(in the function ip6_forward). Signed-off-by: Wei Dong <weid@nanjing-fnst.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We have a more complete solution in the works, involving the seperation of CHECKSUM_HW on input vs. output, and having netfilter properly do incremental checksums. But that is a very involved patch and is thus 2.6.19 material. What we have now is infinitely better than the past, wherein all TSO packets were dropped due to corrupt checksums as soon at the NAT module was loaded. At least now, the checksums do get fixed up, it just isn't the cleanest nor most optimal solution. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
The hashlimit table name and the textsearch algorithm need to be terminated, the textsearch pattern length must not exceed the maximum size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Since we don't know in which direction the first packet will arrive, we need to create one expectation for each direction, which is currently prevented by max_expected beeing set to 1. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Add a dev_alloc_skb variant that takes a struct net_device * paramater. For now that paramater is unused, but I'll use it to allocate the skb from node-local memory in a follow-up patch. Also there have been some other plans mentioned on the list that can use it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Based upon guidance from Alexey Kuznetsov. When linger2 is active, we check to see if the fin_wait2 timeout is longer than the timewait. If it is, we schedule the keepalive timer for the difference between the timewait timeout and the fin_wait2 timeout. When this orphan socket is seen by tcp_keepalive_timer() it will try to transform this fin_wait2 socket into a fin_wait2 mini-socket, again if linger2 is active. Not all paths were setting this initial keepalive timer correctly. The tcp input path was doing it correctly, but tcp_close() wasn't, potentially making the socket linger longer than it really needs to. Signed-off-by: David S. Miller <davem@davemloft.net>
-
James Morris authored
The patch below fixes a problem in the iptables SECMARK target, where the user-supplied 'selctx' string may not be nul-terminated. From initial analysis, it seems that the strlen() called from selinux_string_to_sid() could run until it arbitrarily finds a zero, and possibly cause a kernel oops before then. The impact of this appears limited because the operation requires CAP_NET_ADMIN, which is essentially always root. Also, the module is not yet in wide use. Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Tucker authored
Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Tucker authored
Generate netevents for: - neighbour changes - routing redirects - pmtu changes Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Tucker authored
This patch uses notifier blocks to implement a network event notifier mechanism. Clients register their callback function by calling register_netevent_notifier() like this: static struct notifier_block nb = { .notifier_call = my_callback_func }; ... register_netevent_notifier(&nb); Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Refer to RFC2012, tcpAttemptFails is defined as following: tcpAttemptFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state." ::= { tcp 7 } When I lookup into RFC793, I found that the state change should occured under following condition: 1. SYN-SENT -> CLOSED a) Received ACK,RST segment when SYN-SENT state. 2. SYN-RCVD -> CLOSED b) Received SYN segment when SYN-RCVD state(came from LISTEN). c) Received RST segment when SYN-RCVD state(came from SYN-SENT). d) Received SYN segment when SYN-RCVD state(came from SYN-SENT). 3. SYN-RCVD -> LISTEN e) Received RST segment when SYN-RCVD state(came from LISTEN). In my test, those direct state transition can not be counted to tcpAttemptFails. Signed-off-by: Wei Yongjun <yjwei@nanjing-fnst.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
James Morris authored
Based upon a patch by Jesper Juhl. Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Stephen Hemminger <shemminger@osdl.org> Acked-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Otherwise we allow building appletalk drivers in-kernel when CONFIG_ATALK is modular. That doesn't work because these drivers use symbols such as "alloc_talkdev" which is exported from code built by CONFIG_ATALK. Noticed by Toralf Förster. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
When the trim point is within the head and there is no paged data, ___pskb_trim fails to drop the first element in the frag_list. This patch fixes this by moving the len <= offset case out of the page data loop. This patch also adds a missing kfree_skb on the frag that we just cloned. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Header doesn't use anything from atomic.h. It fixes headers_check warning: include/linux/netfilter_bridge.h requires asm/atomic.h, which does not exist Compile tested on alpha arm i386-up sparc sparc64-up x86_64 alpha-up i386 sparc64 sparc-up x86_64-up Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The current users of ip6_dst_lookup can be divided into two classes: 1) The caller holds no locks and is in user-context (UDP). 2) The caller does not want to lookup the dst cache at all. The second class covers everyone except UDP because most people do the cache lookup directly before calling ip6_dst_lookup. This patch adds ip6_sk_dst_lookup for the first class. Similarly ip6_dst_store users can be divded into those that need to take the socket dst lock and those that don't. This patch adds __ip6_dst_store for those (everyone except UDP/datagram) that don't need an extra lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Noriaki TAKAMIYA authored
Based on MIPL2 kernel patch. Signed-off-by: Noriaki YAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
Noriaki TAKAMIYA authored
Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
YOSHIFUJI Hideaki authored
We also do not try regenarating new temporary address corresponding to an address with infinite preferred lifetime. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
Noriaki TAKAMIYA authored
Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
YOSHIFUJI Hideaki authored
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits) V4L/DVB (4380): Bttv: Revert VBI_OFFSET to previous value, it works better V4L/DVB (4379): Videodev: Check return value of class_device_register() correctly V4L/DVB (4373): Correctly handle sysfs error leg file removal in pvrusb2 V4L/DVB (4368): Bttv: use class_device_create_file and handle errors V4L/DVB (4367): Videodev: Handle class_device related errors V4L/DVB (4365): OVERLAY flag were enabled by mistake V4L/DVB (4344): Fix broken dependencies on media Kconfig V4L/DVB (4343): Fix for compilation without V4L1 or V4L1_COMPAT V4L/DVB (4342): Fix ext_controls align on 64 bit architectures V4L/DVB (4341): VIDIOCSMICROCODE were missing on compat_ioctl32 V4L/DVB (4322): Fix dvb-pll autoprobing V4L/DVB (4311): Fix possible dvb-pll oops V4L/DVB (4337): Refine dead code elimination in pvrusb2 V4L/DVB (4323): [budget/budget-av/budget-ci/budget-patch drivers] fixed DMA start/stop code V4L/DVB (4316): Check __must_check warnings V4L/DVB (4314): Set the Auxiliary Byte when tuning LG H06xF in analog mode V4L/DVB (4313): Bugfix for keycode calculation on NPG remotes V4L/DVB (4310): Saa7134: rename dmasound_{init, exit} V4L/DVB (4306): Support non interlaced capture by default for saa713x V4L/DVB (4298): Check all __must_check warnings in bttv. ...
-
- 31 Jul, 2006 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Minor comment fix for misc_64.S [POWERPC] Use H_CEDE on non-SMT [POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs [POWERPC] PMAC_APM_EMU should depend on ADB_PMU [POWERPC] Fix new interrupt code (MPIC detection) [POWERPC] Fix new interrupt code (MPIC endianness) [POWERPC] Add cpufreq support for Xserve G5 [POWERPC] Xserve G5 thermal control fixes [POWERPC] Fix mem= handling when the memory limit is > RMO size [POWERPC] More offb/bootx fixes [POWERPC] Fix legacy_serial.c error handling on 32 bits [POWERPC] Fix default clock for udbg_16550 [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set [POWERPC] Fix 32 bits warning in prom_init.c [POWERPC] Workaround Pegasos incorrect ISA "ranges" [POWERPC] fix up front-LED Kconfig
-
Guido Guenther authored
Since we now use the generic backlight infrastructure, I think we need to call rivafb_bl_init before calling register_framebuffer since otherwise rivafb_bl_init might race with the framebuffer layer already opening the device and setting up the video mode. In this case we might end up with a not yet fully intialized backlight (info->bl_dev still NULL) when calling riva_bl_set_power via rivafb_set_par/rivafb_load_video_mode and the kernel dies without any further notice during boot. This fixes booting current git on a PB 6,1. In this case radeonfb/atyfb would be affected too - I can fix that too but don't have any hardware to test this on. Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Arthur Othieno authored
CONFIG_FB_NVIDIA already depends on CONFIG_PCI in drivers/video/Kconfig. Driver does an extra ``sanity check'' which is then redundant. Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Cc: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Hanselmann authored
This patch fixes several problems: - The legacy backlight value might be set at interrupt time. Introduced a worker to prevent it from directly calling the backlight code. - via-pmu allows the backlight to be grabbed, in which case we need to prevent other kernel code from changing the brightness. - Don't send PMU requests in via-pmu-backlight when the machine is about to sleep or waking up. - More Kconfig fixes. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Volker Braun authored
Many IBM Thinkpad T4* models and some R* and X* with radeon video cards draw too much power when suspended to RAM, reducing drastically the battery lifetime. The solution is to enable suspend-to-D2 on these machines. They are whitelisted through their subsystem vendor/device ID. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=3022 The patch introduces a framework to alter the pm_mode and reinit_func fields of the radeonfb_info structure based on a whitelist. This should facilitate future hardware-dependent workarounds. The workaround for the Samsung P35 that is already in the radeonfb code has been rewritten using this framework. The behavior can be overridden with module options: i) video=radeonfb:force_sleep=1 enable suspend-to-D2 also on non-whitelisted machines (useful for testing new notebook models), ii) video=radeonfb:ignore_devlist=1 Disable checking the whitelist and do not apply any workarounds. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Antonino A. Daplas authored
The backlight and lcd subsystems can be notified by the framebuffer layer of blanking events. However, these subsystems, as a whole, can function independently from the framebuffer layer. But in order to enable to the lcd and backlight subsystems, the framebuffer has to be compiled also, effectively sucking in a huge amount of unneeded code. To prevent dependency problems, separate out the framebuffer notification mechanism from the framebuffer layer and permanently link it to the kernel. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric Van Hensbergen authored
Based on a bug report from Russ Ross <russruss@gmail.com> According to the spec: "The remove request asks the file server both to remove the file represented by fid and to clunk the fid, even if the remove fails." but the Linux client seems to expect the fid to be valid after a failed remove attempt. Specifically, I'm getting this behavior when attempting to remove a non-empty directory. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Use preferred email address. Remove sf.net project reference. It is no longer used. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Russ Ross authored
Signed-off-by: Russ Ross <russross@gmail.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Badari Pulavarty authored
For files other than IFREG, nobh option doesn't make sense. Modifications to them are journalled and needs buffer heads to do that. Without this patch, we get kernel oops in page_buffers(). Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Josh Triplett authored
kernel/timer.c defines a (per-cpu) pointer to tvec_base_t, but initializes it using { &a_tvec_base_t }, which sparse warns about; change this to just &a_tvec_base_t. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Josh Triplett authored
Commit 7b2fd697427e73c81d5fa659efd91bd07d303b0e in the historical GIT tree stopped calling the readdir member of a file_operations struct with the big kernel lock held, and fixed up all the readdir functions to do their own locking. However, that change added calls to unlock_kernel() in vxfs_readdir, but no call to lock_kernel(). Fix this by adding a call to lock_kernel(). Signed-off-by: Josh Triplett <josh@freedesktop.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Thomas Horsley authored
I spent a long time the other day trying to examine an initrd image on a fedora core 5 system because the initrd.txt file is apparently obsolete. Here is a patch which I hope will reduce future confusion for others. Signed-off-by: Thomas Horsley <tom.horsley@ccur.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
Clean up ipc/msg.c to conform to Documentation/CodingStyle. (before it was an inconsistent hodepodge of various coding styles) Verified that the before/after .o's are identical. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Miklos Szeredi authored
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-