- 09 Oct, 2018 9 commits
-
-
Vasily Gorbik authored
Remove STACK_ORDER and STACK_SIZE in favour of identical THREAD_SIZE_ORDER and THREAD_SIZE definitions. THREAD_SIZE and THREAD_SIZE_ORDER naming is misleading since it is used as general kernel stack size information. But both those definitions are used in the common code and throughout architectures specific code, so changing the naming is problematic. Reviewed-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
With virtually mapped kernel stacks the kernel stack overflow detection is now fault based, every stack has a guard page in the vmalloc space. The panic_stack is renamed to nodat_stack and is used for all function that need to run without DAT, e.g. memcpy_real or do_start_kdump. The main effect is a reduction in the kernel image size as with vmap stacks the old style overflow checking that adds two instructions per function is not needed anymore. Result from bloat-o-meter: add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042) In regard to performance the micro-benchmark for fork has a hit of a few microseconds, allocating 4 pages in vmalloc space is more expensive compare to an order-2 page allocation. But with real workload I could not find a noticeable difference. Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
Reviewed-by:
-
Martin Schwidefsky authored
With CONFIG_VMAP_STACK=y the kernel stack of all tasks should be allocated in the vmalloc space. The initial stack used for all the early init code is in the init_thread_union. To be able to switch from this early stack to a properly allocated stack from vmalloc the architecture needs a switch-over point. Introduce the arch_call_rest_init() function with a weak definition in init/main.c with the only purpose to call rest_init() from the end of start_kernel(). The architecture override can then do the necessary magic to switch to the new vmalloc'ed stack. Signed-off-by: -
Martin Schwidefsky authored
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space. Data structures passed to a hardware or a hypervisor interface that requires V=R can not be allocated on the stack anymore. Make the init and fini pfault parameter blocks static variables. Signed-off-by: -
Martin Schwidefsky authored
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space. Data structures passed to a hardware or a hypervisor interface that requires V=R can not be allocated on the stack anymore. Use kmalloc to get memory for the appldata_parameter_list and appldata_product_id structures. Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space. Data structures passed to a hardware or a hypervisor interface that requires V=R can not be allocated on the stack anymore. Use kmalloc to get memory for the hypsfs_diag304 structure. Signed-off-by: -
Martin Schwidefsky authored
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space. Data structures passed to a hardware or a hypervisor interface that requires V=R can not be allocated on the stack anymore. Use kmalloc to get memory for the appldata_product_id and the appldata_parameter_list structures. Reviewed-by:
-
Martin Schwidefsky authored
In preparation for CONFIG_VMAP_STACK=y move the allocation of the struct appldata_parameter_list to the caller of appldata_asm(). Reviewed-by:
-
- 08 Oct, 2018 2 commits
-
-
Julian Wiedmann authored
Provide function to find a ccwgroup device by its busid. Acked-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Harald Freudenberger authored
This patch is an extension to the zcrypt device driver to provide, support and maintain multiple zcrypt device nodes. The individual zcrypt device nodes can be restricted in terms of crypto cards, domains and available ioctls. Such a device node can be used as a base for container solutions like docker to control and restrict the access to crypto resources. The handling is done with a new sysfs subdir /sys/class/zcrypt. Echoing a name (or an empty sting) into the attribute "create" creates a new zcrypt device node. In /sys/class/zcrypt a new link will appear which points to the sysfs device tree of this new device. The attribute files "ioctlmask", "apmask" and "aqmask" in this directory are used to customize this new zcrypt device node instance. Finally the zcrypt device node can be destroyed by echoing the name into /sys/class/zcrypt/destroy. The internal structs holding the device info are reference counted - so a destroy will not hard remove a device but only marks it as removable when the reference counter drops to zero. The mask values are bitmaps in big endian order starting with bit 0. So adapter number 0 is the leftmost bit, mask is 0x8000... The sysfs attributes accept 2 different formats: * Absolute hex string starting with 0x like "0x12345678" does set the mask starting from left to right. If the given string is shorter than the mask it is padded with 0s on the right. If the string is longer than the mask an error comes back (EINVAL). * Relative format - a concatenation (done with ',') of the terms +<bitnr>[-<bitnr>] or -<bitnr>[-<bitnr>]. <bitnr> may be any valid number (hex, decimal or octal) in the range 0...255. Here are some examples: "+0-15,+32,-128,-0xFF" "-0-255,+1-16,+0x128" "+1,+2,+3,+4,-5,-7-10" A simple usage examples: # create new zcrypt device 'my_zcrypt': echo "my_zcrypt" >/sys/class/zcrypt/create # go into the device dir of this new device echo "my_zcrypt" >create cd my_zcrypt/ ls -l total 0 -rw-r--r-- 1 root root 4096 Jul 20 15:23 apmask -rw-r--r-- 1 root root 4096 Jul 20 15:23 aqmask -r--r--r-- 1 root root 4096 Jul 20 15:23 dev -rw-r--r-- 1 root root 4096 Jul 20 15:23 ioctlmask lrwxrwxrwx 1 root root 0 Jul 20 15:23 subsystem -> ../../../../class/zcrypt ... # customize this zcrypt node clone # enable only adapter 0 and 2 echo "0xa0" >apmask # enable only domain 6 echo "+6" >aqmask # enable all 256 ioctls echo "+0-255" >ioctls # now the /dev/my_zcrypt may be used # finally destroy it echo "my_zcrypt" >/sys/class/zcrypt/destroy Please note that a very similar 'filtering behavior' also applies to the parent z90crypt device. The two mask attributes apmask and aqmask in /sys/bus/ap act the very same for the z90crypt device node. However the implementation here is totally different as the ap bus acts on bind/unbind of queue devices and associated drivers but the effect is still the same. So there are two filters active for each additional zcrypt device node: The adapter/domain needs to be enabled on the ap bus level and it needs to be active on the zcrypt device node level. Signed-off-by:Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
-
- 20 Sep, 2018 14 commits
-
-
Julian Wiedmann authored
I've stumbled over this too many times now... AOBs are only ever used on Output Queues. So in qdio_kick_handler(), move the call to their handler into the Output-only path, and get rid of the convoluted contains_aobs() helper. No functional change. While at it, also remove 1. the unused sbal_state->aob field. For processing an async completion, upper-layer drivers get their AOB pointer from the CQ buffer. 2. an unused EXPORT for qdio_allocate_aob(). External users would have no way of passing an allocated AOB back into qdio.ko anyways... Signed-off-by:
-
Vasily Gorbik authored
Replace hard coded stack frame overhead values with STACK_FRAME_OVERHEAD definition. Avoid unnecessary arithmetic instructions. Signed-off-by:
-
Vasily Gorbik authored
Correct stack frame overhead for 31-bit vdso, which should be 96 rather then 160. This is done by reusing STACK_FRAME_OVERHEAD definition which contains correct value based on build flags. This fixes stack unwinding within vdso code for 31-bit processes. While at it replace all hard coded stack frame overhead values with the same definition in vdso64 as well. Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
vdso_fault used is_compat_task function (on s390 it tests "current" thread_info flags) to distinguish compat tasks and map 31-bit vdso pages. But "current" task might not correspond to mm context. When 31-bit compat inferior is executed under gdb, gdb does PTRACE_PEEKTEXT on vdso page, causing vdso_fault with "current" being 64-bit gdb process. So, 31-bit inferior ends up with 64-bit vdso mapped. To avoid this problem a new compat_mm flag has been introduced into mm context. This flag is used in vdso_fault and vdso_mremap instead of is_compat_task. Signed-off-by:
-
Halil Pasic authored
The AP bus scan is aborted before doing anything worth mentioning if ap_select_domain() fails, e.g. if the ap_rights.aqm mask is all zeros. As the result of this the ap bus fails to manage (e.g. create and register) devices like it is supposed to. Let us make ap_scan_bus() work even if ap_select_domain() can't select a default domain. Let's also make ap_select_domain() return void, as there are no more callers interested in its return value. Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Reported-by:
Michael Mueller <mimu@linux.ibm.com> Fixes: 7e0bdbe5 "s390/zcrypt: AP bus support for alternate driver(s)" [freude@linux.ibm.com: title and patch header slightly modified] Signed-off-by:
-
Martin Schwidefsky authored
To be able to start a kernel image loaded into memory with a PSW restart, place a 64-bit restart PSW at 0x1a0 in absolute lowcore. Suggested-by:
Dominik Klein <dominik.klein@linux.ibm.com> Tested-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in message text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
zhong jiang authored
Use the common code ARRAY_SIZE macro instead of a private implementation. Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
zhong jiang authored
kmemdup has implemented the function that kmalloc() + memcpy() will do. We prefer to use the kmemdup function rather than an open coded implementation. Signed-off-by:
-
Jan Höppner authored
The SCLP event 24 "Adapter Error Notification" supports three different action qualifier of which 'adapter reset' is currently not enabled in the sysfs interface. However, userspace tools might want to be able to use the reset functionality as well. Enable the 'adapter reset' qualifier. Signed-off-by:
Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by:
-
Chengguang Xu authored
kmem_cache_destroy() can handle NULL pointer correctly, so there is no need to check NULL pointer before calling kmem_cache_destroy(). Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Signed-off-by:
-
Gerald Schaefer authored
The resume code checks if the resume cpu is the same as the suspend cpu. If not, and if it is also not possible to switch to the suspend cpu, an error message should be printed and the resume process should be stopped by loading a disabled wait psw. The current logic is broken in multiple ways, the message is never printed, and the disabled wait psw never loaded because the kernel panics before that: - sam31 and SIGP_SET_ARCHITECTURE to ESA mode is wrong, this will break on the first 64bit instruction in sclp_early_printk(). - The init stack should be used, but the stack pointer is not set up correctly (missing aghi %r15,-STACK_FRAME_OVERHEAD). - __sclp_early_printk() checks the sclp_init_state. If it is not sclp_init_state_uninitialized, it simply returns w/o printing anything. In the resumed kernel however, sclp_init_state will never be uninitialized. This patch fixes those issues by removing the sam31/ESA logic, adding a correct init stack pointer, and also introducing sclp_early_printk_force() to allow using sclp_early_printk() even when sclp_init_state is not uninitialized. Reviewed-by:
-
git://git.infradead.org/linux-mtdGreg Kroah-Hartman authored
Boris writes: "- Fixes a bug in the ->read/write_reg() implementation of the m25p80 driver - Make sure of_node_get/put() calls are balanced in the partition parsing code - Fix a race in the denali NAND controller driver - Fix false positive WARN_ON() in the marvell NAND controller driver" * tag 'mtd/fixes-for-4.19-rc5' of git://git.infradead.org/linux-mtd: mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able mtd: partitions: fix unbalanced of_node_get/put() mtd: rawnand: denali: fix a race condition when DMA is kicked mtd: rawnand: marvell: prevent harmless warnings -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundGreg Kroah-Hartman authored
Takashi writes: "sound fixes for 4.19-rc5 here comes a collection of various fixes, mostly for stable-tree or regression fixes. Two relatively high LOCs are about the (rather simple) conversion of uapi integer types in topology API, and a regression fix about HDMI hotplug notification on AMD HD-audio. The rest are all small individual fixes like ASoC Intel Skylake race condition, minor uninitialized page leak in emu10k1 ioctl, Firewire audio error paths, and so on." * tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits) ALSA: fireworks: fix memory leak of response buffer at error path ALSA: oxfw: fix memory leak of discovered stream formats at error path ALSA: oxfw: fix memory leak for model-dependent data at error path ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path ALSA: hda - Enable runtime PM only for discrete GPU ALSA: oxfw: fix memory leak of private data ALSA: firewire-tascam: fix memory leak of private data ALSA: firewire-digi00x: fix memory leak of private data sound: don't call skl_init_chip() to reset intel skl soc sound: enable interrupt after dma buffer initialization Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation" ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO ASoC: cs4265: fix MMTLR Data switch control ASoC: AMD: Ensure reset bit is cleared before configuring ALSA: fireface: fix memory leak in ff400_switch_fetching_mode() ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER ASoC: rsnd: adg: care clock-frequency size ASoC: uniphier: change status to orphan ASoC: rsnd: fixup not to call clk_get/set under non-atomic ...
-
- 19 Sep, 2018 5 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'hwmon-for-linus-v4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Guenter writes: "Various bug fixes for nct6775 driver"
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiGreg Kroah-Hartman authored
James writes: "SCSI fixes on 20180919 A couple of small but important fixes, one affecting big endian and the other fixing a BUG_ON in scatterlist processing. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>"
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Greg Kroah-Hartman authored
Crypto stuff from Herbert: "This push fixes a potential boot hang in ccp and an incorrect CPU capability check in aegis/morus on x86." * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/aegis,morus - Do not require OSXSAVE for SSE2 crypto: ccp - add timeout support in the SEV command
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceGreg Kroah-Hartman authored
Steven writes: "Vaibhav Nagarnaik found that modifying the ring buffer size could cause a huge latency in the system because it does a while loop to free pages without releasing the CPU (on non preempt kernels). In a case where there are hundreds of thousands of pages to free it could actually cause a system stall. A properly place cond_resched() solves this issue."
-
git://git.infradead.org/linux-platform-drivers-x86Greg Kroah-Hartman authored
Darren writes: "platform-drivers-x86 for v4.19-2 Free allocated ACPI buffers in two drivers. The following is an automated git shortlog grouped by driver: alienware-wmi: - Correct a memory leak dell-smbios-wmi: - Correct a memory leak" * tag 'platform-drivers-x86-v4.19-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: alienware-wmi: Correct a memory leak platform/x86: dell-smbios-wmi: Correct a memory leak
-
- 18 Sep, 2018 10 commits
-
-
Boris Brezillon authored
As documented in spi-mem.h, spi_mem_op->data.buf.{in,out} must be DMA-able, and commit 4120f8d1 ("mtd: spi-nor: Use the spi_mem_xx() API") failed to follow this rule as buffers passed to ->{read,write}_reg() are usually placed on the stack. Fix that by allocating a scratch buffer and copying the data around. Fixes: 4120f8d1 ("mtd: spi-nor: Use the spi_mem_xx() API") Reported-by:Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Tested-by:
-
Greg Kroah-Hartman authored
Dave writes: "Various fixes, all over the place: 1) OOB data generation fix in bluetooth, from Matias Karhumaa. 2) BPF BTF boundary calculation fix, from Martin KaFai Lau. 3) Don't bug on excessive frags, to be compatible in situations mixing older and newer kernels on each end. From Juergen Gross. 4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger. 5) Zero keying information in TLS layer before freeing copies of them, from Sabrina Dubroca. 6) Fix NULL deref in act_sample, from Davide Caratti. 7) Orphan SKB before GRO in veth to prevent crashes with XDP, from Toshiaki Makita. 8) Fix use after free in ip6_xmit, from Eric Dumazet. 9) Fix VF mac address regression in bnxt_en, from Micahel Chan. 10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann. 11) Programming adjustments to r8169 which fix not being to enter deep sleep states on some machines, from Kai-Heng Feng and Hans de Goede. 12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter Oskolkov." * gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits) net/ipv6: do not copy dst flags on rt init qmi_wwan: set DTR for modems in forced USB2 mode clk: x86: Stop marking clocks as CLK_IS_CRITICAL r8169: Get and enable optional ether_clk clock clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail r8169: enable ASPM on RTL8106E r8169: Align ASPM/CLKREQ setting function with vendor driver Revert "kcm: remove any offset before parsing messages" kcm: remove any offset before parsing messages net: ethernet: Fix a unused function warning. net: dsa: mv88e6xxx: Fix ATU Miss Violation tls: fix currently broken MSG_PEEK behavior hv_netvsc: pair VF based on serial number PCI: hv: support reporting serial number as slot information bnxt_en: Fix VF mac address regression. ipv6: fix possible use-after-free in ip6_xmit() net: hp100: fix always-true check for link up state ARM: dts: at91: add new compatibility string for macb on sama5d3 net: macb: disable scatter-gather for macb on sama5d3 net: mvpp2: let phylink manage the carrier state ... -
Peter Oskolkov authored
DST_NOCOUNT in dst_entry::flags tracks whether the entry counts toward route cache size (net->ipv6.sysctl.ip6_rt_max_size). If the flag is NOT set, dst_ops::pcpuc_entries counter is incremented in dist_init() and decremented in dst_destroy(). This flag is tied to allocation/deallocation of dst_entry and should not be copied from another dst/route. Otherwise it can happen that dst_ops::pcpuc_entries counter grows until no new routes can be allocated because the counter reached ip6_rt_max_size due to DST_NOCOUNT not set and thus no counter decrements on gc-ed routes. Fixes: 3b6761d1 ("net/ipv6: Move dst flags to booleans in fib entries") Cc: David Ahern <dsahern@gmail.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Peter Oskolkov <posk@google.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
Recent firmware revisions have added the ability to force these modems to USB2 mode, hiding their SuperSpeed capabilities from the host. The driver has been using the SuperSpeed capability, as shown by the bcdUSB field of the device descriptor, to detect the need to enable the DTR quirk. This method fails when the modems are forced to USB2 mode by the modem firmware. Fix by unconditionally enabling the DTR quirk for the affected device IDs. Reported-by:
Fred Veldini <fred.veldini@gmail.com> Reported-by:
Deshu Wen <dwen@sierrawireless.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Reported-by:
-
David S. Miller authored
Hans de Goede says: ==================== r8169 (x86) clk fixes to fix S0ix not being reached This series adds code to the r8169 ethernet driver to get and enable an external clock if present, avoiding the need for a hack in the clk-pmc-atom driver where that clock was left on continuesly causing x86 some devices to not reach deep power saving states (S0ix) when suspended causing to them to quickly drain their battery while suspended. The 3 commits in this series need to be merged in order to avoid regressions while bisecting. The clk-pmc-atom driver does not see much changes (it was last touched over a year ago). So the clk maintainers have agreed with merging all 3 patches through the net tree. All 3 patches have Stephen Boyd's Acked-by for this purpose. This v2 of the series only had some minor tweaks done to the commit messages and is ready for merging through the net tree now. ==================== Signed-off-by: -
Hans de Goede authored
Commit d31fd43c ("clk: x86: Do not gate clocks enabled by the firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver has been modified to get and enable this clock (if present) the marking of the clocks as CLK_IS_CRITICAL is no longer necessary. This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail devices not being able to reach S0i3 greatly decreasing their battery drain when suspended. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by:
Johannes Stezenbach <js@sig21.net> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
On some boards a platform clock is used as clock for the r8169 chip, this commit adds support for getting and enabling this clock (assuming it has an "ether_clk" alias set on it). This is related to commit d31fd43c ("clk: x86: Do not gate clocks enabled by the firmware") which is a previous attempt to fix this for some x86 boards, but this causes all Cherry Trail SoC using boards to not reach there lowest power states when suspending. This commit (together with an atom-pmc-clk driver commit adding the alias) fixes things properly by making the r8169 get the clock and enable it when it needs it. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by:
-
Hans de Goede authored
Commit d31fd43c ("clk: x86: Do not gate clocks enabled by the firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i2 or S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk" alias, so that the relevant ethernet drivers can try to (optionally) use this, without needing X86 specific code / hacks, thus fixing ethernet on these devices without breaking S0i3 support. This commit uses clkdev_hw_create() to create the alias, mirroring the code for the already existing "mclk" alias for pmc_plt_clk_3. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by:
-
Kai-Heng Feng authored
The Intel SoC was prevented from entering lower idle state because of RTL8106E's ASPM was not enabled. So enable ASPM on RTL8106E (chip version 39). Now the Intel SoC can enter lower idle state, power consumption and temperature are much lower. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Kai-Heng Feng authored
There's a small delay after setting ASPM in vendor drivers, r8101 and r8168. In addition, those drivers enable ASPM before ClkReq, also change that to align with vendor driver. I haven't seen anything bad becasue of this, but I think it's better to keep in sync with vendor driver. Signed-off-by:
-
