We were miscalculating the pipe CSC post offset for the full->limited
range conversion. The resulting post offset was double what it was
supposed to be, which caused blacks to come out grey when using
limited range output on HSW+.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71769
Cc: stable@vger.kernel.org
Tested-by: Lauri Mylläri <lauri.myllari@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Reduce the eDP detection to just checking if it's port A, or if
the VBT tells us that the port is eDP for the other ports.
Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

VLV can have eDP on either port B or C, or even both. Based on the
VBT spec, intel_dpd_is_edp() should work on VLV too, assuming we
check the correct ports.

So instead of hardcoding port D, rename the function to
intel_dp_is_edp() and pass the port as a parameter, and use it
on VLV ports B and C.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71051Tested-by: Robert Hooker <robert.hooker@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Wrestle the patch to apply and compile properly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This value is more correct, and matches what we read out in the fastboot
code.  Without this, the watermark code will panic after the first mode
setting activity after a fastboot.

v2: fix up HSW ->clock usage too (Ville)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

As the execbuffer dispatch grows ever more complex and involves multiple
stages of moving objects into the aperture, we need to take greater care
that we do not evict our execbuffer objects prior to dispatch. This is
relatively simple as we can just keep the objects pinned for not just
the relocation but until we are finished.

One such example is the possibility of the context switch causing an
eviction or hitting the shrinker in order to fit its object into the
aperture.

Link: http://lists.freedesktop.org/archives/intel-gfx/2013-November/036166.htmlReported-by: "Siluvery, Arun" <arun.siluvery@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Add the additional explanations from Chris to the commit
message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This is just a theoretical issue, but we need to do this to prevent the
WARN in pipe_from_connector at suspend time.

This regression has been introduce in

commit 7bd688cd
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Fri Nov 8 16:48:56 2013 +0200

    drm/i915: handle backlight through chip specific functions

https://bugs.freedesktop.org/show_bug.cgi?id=71978Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We have conflicting benchmark data that suggest either age 0 or age 3 is
better. However, the earlier benchmark on which we based the switch to
age 0

(commit 0d8ff15e
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Thu Jul 4 11:02:03 2013 -0700

    drm/i915/hsw: Set correct Haswell PTE encodings)

actually seems to prefer the default PTE encoding as age 3. Presumably,
this is in part due to the use of MOCS to override the PTE encodings
when appropriate.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69870
Tested-by: mengmeng.meng@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Eric Anholt <eric@anholt.net
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Similar to
commit fdbc3b1f
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Tue Nov 12 17:10:13 2013 +0200

    drm/i915/dp: set sink to power down mode on dp disable

but for DDI, where we've never done this.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This regression has been introduced in

commit 4fe8590a
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Wed Sep 4 18:25:22 2013 +0300

    drm/i915: Use adjusted_mode appropriately when computing watermarks

I guess we should renable the enabled local variable into something a
notch more descriptive, but that's something for -next.

The effect on my i945gme netbook is pretty severe amounts of underruns
- usually the very first pixel gets used for the entire screeen.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Haswell's DDI encoders have their own ->get_config callback and in

commit c6cd2ee2
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Mon Oct 21 10:52:07 2013 +0300

    drm/i915/dp: workaround BIOS eDP bpp clamping issue

we've forgotten to replicate this hack. So let's do it that.

Note for backporters: The above commit and all it's depencies need to
be backported first.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71049
Cc: stable@vger.kernel.org
Tested-by: Gökçen Eraslan <gokcen.eraslan@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

If the hardware does not support package C8, then do not even schedule
work to enable it. Thereby we can eliminate a bunch of dangerous work.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We need to hold the pc8 lock around toggling the value of gpu_idle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We must have one to fill out the adjusted_mode.crtc_clock. And with
the tv encoder fixed up every encoder we have has a ->get_config
callback. So we can drop the checks.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We need this to properly fill in adjusted_mode.crtc_clock, otherwise
the state checker gets unhappy. This seems to have been forgotten in
the big clock rework in

commit 18442d08
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Fri Sep 13 16:00:08 2013 +0300

    drm/i915: Fix port_clock and adjusted_mode.clock readout all over

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Some BIOS just leak the forcewak bits, which we clean up.
Unfortunately this has been broken in

commit 521198a2
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Fri Aug 23 16:52:30 2013 +0300

    drm/i915: sanitize forcewake registers on reset

To make this work both for resets and for BIOS takeover just add the
forcewake clearing call back to intel_uncore_early_sanitize.

We need to clear the forcewake in early sanitize so that the forcewak
dance in intel_uncore_init (to figure out whether we have mt or legacy
forcewake on ivb) works. That cleanup fits in nicely with the general
topic of early_sanitize to prepare for the very first mmio ops.

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Jörg Otte <jrg.otte@gmail.com>
References: https://lkml.org/lkml/2013/11/16/40
Cc: stable@vger.kernel.org (for 3.12 only)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 351aa566.

It breaks rc6 on at least one snb machine. Since we don't yet have a
report for ivb let's keep it there for now.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71656
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: erik@vontaene.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Apparently they need the same treatment as primary planes. This fixes
modesetting failures because of stuck cursors (!) on Thomas' i830M
machine.

I've figured while at it I'll also roll it out for the ivb 3 pipe
version of this function. I didn't do this for i845/i865 since Bspec
says the update mechanism works differently, and there's some
additional rules about what can be updated in which order.
Tested-by: Thomas Richter <thor@math.tu-berlin.de>
Cc: stable@vger.kernel.org
Cc:  Thomas Richter <thor@math.tu-berlin.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We had been using a DMI table workaround to select the right
frequency for devices, but this is fragile and must be updated
with every new platform.

Instead the default case when VBT is missing is changed to use
120MHz clock for LVDS SSC for these generations.

The docs for 2010-Core, SandyBridge, and IvyBridge all indicate
that the reference frequency for LVDS is 120MHz:

"2010 Core"
http://intellinuxgraphics.org/IHD_OS_Vol3_Part3r2.pdf
page 38
Reference Frequency: 120MHz for CRT and LVDS.  100MHz for the FDI.

"2011 SandyBridge"
http://intellinuxgraphics.org/documentation/SNB/IHD_OS_Vol3_Part3.pdf
page 33
Reference Frequency: 120MHz for CRT, HDMI, LVDS.  100MHz for the FDI.

"2012 IvyBridge"
http://intellinuxgraphics.org/documentation/IVB/IHD_OS_Vol3_Part4.pdf
page 27
Reference Frequency: 120 MHz for CRT, HDMI, LVDS, 100MHz for the FDI.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
[olof: Fixup for recent base, switched from if/else to single call]
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We've always been able to use either method on VLV, but it appears more
recent BIOSes only support the gen6 method, so switch over to that.

References: https://bugs.freedesktop.org/show_bug.cgi?id=71370Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We used to put the local sink and any downstream sinks to power down
mode at disable or dpms off using the DPCD SET_POWER register, until
this was broken by

commit e8cb4558
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jul 1 13:05:48 2012 +0200

    drm/i915/dp: convert to encoder disable/enable

Fix it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

One last patch I keep forgetting to include.  Fix for EDID quirk
handling.  Been on the list and reviewed for several months now,
I just keep forgetting about it.

* 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux:
  drm/edid: compare actual vrefresh for all modes for quirks

Merge tag 'drm-intel-fixes-2013-11-12' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Just one patch to fix compile fail for CONFIG_ACPI=n. Figured I better
send this out quickly to minimize the broken build span. Otherwise no
bugfixes (besides some bdw stuff) anywhere in sight.

* tag 'drm-intel-fixes-2013-11-12' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915/opregion: fix build error on CONFIG_ACPI=n

The page-prot bit fix.

* 'ttm-next-3.13' of git://people.freedesktop.org/~thomash/linux:
  drm/ttm: Fix vma page_prot bit manipulation

A resource eviction fix, and a fix for compilation / sparse problems
from the previous pull.

* 'vmwgfx-next-3.13' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Fix a couple of compile / sparse warnings and errors
  drm/vmwgfx: Resource evict fixes

Fix a long-standing TTM issue where we manipulated the vma page_prot
bits while mmap_sem was taken in read mode only. We now make a local
copy of the vma structure which we pass when we set the ptes.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>

Fixes
 *) an implicit function declaration on mips,
 *) a defined but not used label on !CONFIG_INTEL_IOMMU
 *) Hopefully a couple of sparse warnings where we implicitly typecast
    integer to __le32 and vice versa.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

Fix an error message that was incorrectly blaming device resource id
shortage.

Also make sure we correctly catch resource eviction errors, that
could otherwise lead to evictable resources temporarily not being on the
LRU list.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org

The vrefresh field of the mode is 0 for most modes
fetched from the EDID (e.g., established timings).
When dealing with monitors that have a bogus preferred
mode, we may not always select the mode we want because
we compare the target refresh to the mode's vrefresh which
is 0 in a lot of cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

SDVO support for minnowboard

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500/mrst: Add SDVO to output init
  drm/gma500/mrst: Don't blindly guess a mode for LVDS
  drm/gma500/mrst: Setup GMBUS for oaktrail/mrst
  drm/gma500/mrst: Replace WMs and chickenbits with values from EMGD
  drm/gma500/mrst: Add aux register writes to SDVO
  drm/gma500/mrst: Properly route oaktrail hdmi hooks
  drm/gma500/mrst: Add aux register writes when programming pipe
  drm/gma500/mrst: Add SDVO clock calculation
  drm/gma500: Add aux device support for gmbus
  drm/gma500: Add support for aux pci vdc device
  drm/gma500: Add chip specific sdvo masks
  drm/gma500: Add Minnowboard to the IS_MRST() macro

Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.

Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

So here's the Broadwell pull request. From a kernel driver pov there's
two areas with big changes in Broadwell:
- Completely new enumerated interrupt bits. On the plus side it now looks
  fairly unform and sane.
- Completely new pagetable layout.

To ensure minimal impact on existing platforms we've refactored both the
irq and low-level gtt handling code a lot in anticipation of the bdw push.
So now bdw enabling in these areas just plugs in a bunch of vfuncs.

Otherwise it's all fairly harmless adjusting of switch cases and
if-ladders to shovel bdw into the right blocks. So minimized impact on
existing platforms. I've also merged the bdw-stage1 branch into our
-nightly integration branch for the past week to make sure we don't break
anything.

Note that there's still quite a flurry or patches floating around, but
I've figured I'll push this out. I plan to keep the bdw fixes separate
from my usual -fixes stream so that you can reject them easily in case it
still looks like too much churn. Also, bdw is for now hidden behind the
preliminary hw enabling module option. So there's no real pressure to get
follow-up patches all into 3.13.

* tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits)
  drm/i915: Mask the vblank interrupt on bdw by default
  drm/i915: Wire up cpu fifo underrun reporting support for bdw
  drm/i915: Optimize gen8_enable|disable_vblank functions
  drm/i915: Wire up pipe CRC support for bdw
  drm/i915: Wire up PCH interrupts for bdw
  drm/i915: Wire up port A aux channel
  drm/i915: Fix up the bdw pipe interrupt enable lists
  drm/i915: Optimize pipe irq handling on bdw
  drm/i915/bdw: Take render error interrupt out of the mask
  drm/i915/bdw: Add BDW PCH check first
  drm/i915: Use hsw_crt_get_config on BDW
  drm/i915/bdw: Change dp aux timeout to 600us on DDIA
  drm/i915/bdw: Enable trickle feed on Broadwell
  drm/i915/bdw: WaSingleSubspanDispatchOnAALinesAndPoints
  drm/i915/bdw: conservative SBE VUE cache mode
  drm/i915/bdw: Limit SDE poly depth FIFO to 2
  drm/i915/bdw: Sampler power bypass disable
  ddrm/i915/bdw: Disable centroid pixel perf optimization
  drm/i915/bdw: BWGTLB clock gate disable
  drm/i915/bdw: Implement edp PSR workarounds
  ...

A few more patches for 3.13.  The big one here is Hawaii support.
I wanted to get that out sooner, but was sick earlier this week.  That
said, it's mostly self contained, so it shouldn't impact other asics.
The rest are just bug fixes and a merge fix.

* 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
  Revert "drm/radeon/audio: don't set speaker allocation on DCE4+"
  drm/radeon/audio: improve ACR calculation
  drm/radeon/audio: correct ACR table
  drm/radeon: fix mismerge of drm-next with 3.12
  drm/radeon: add pci ids for hawaii
  drm/radeon: fill in radeon_asic_init for hawaii
  drm/radeon: modesetting updates for hawaii
  drm/radeon: atombios.h updates for hawaii
  drm/radeon: update cik_get_csb_buffer for hawaii
  drm/radeon: add hawaii dpm support
  drm/radeon/cik: add hawaii UVD support
  drm/radeon: update firmware loading for hawaii
  drm/radeon: update rb setup for hawaii
  drm/radeon: add golden register settings for hawaii
  drm/radeon: update cik_tiling_mode_table_init() for hawaii
  drm/radeon: minor updates to cik.c for hawaii
  drm/radeon: update cik_gpu_init() for hawaii
  drm/radeon: add Hawaii chip family
  drm/radeon: fix-up some float to fixed conversion thinkos
  drm/radeon: use HDP_MEM_COHERENCY_FLUSH_CNTL for sdma as well
  ...

prime support, inactive rework, render nodes
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/msm/mdp4: page_flip cleanups/fixes
  drm/msm: EBUSY status handling in msm_gem_fault()
  drm/msm: rework inactive-work
  drm/msm: add plane support
  drm/msm: resync generated headers
  drm/msm: support render nodes
  drm/msm: prime support

This uses the proper div macro.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fix CONFIG_ACPI=n build fail

  CC      drivers/gpu/drm/i915/intel_opregion.o
drivers/gpu/drm/i915/intel_opregion.c: In function ‘intel_opregion_setup’:
drivers/gpu/drm/i915/intel_opregion.c:879:2: error: ‘asle_work’ undeclared (first use in this function)
drivers/gpu/drm/i915/intel_opregion.c:879:2: note: each undeclared identifier is reported only once for each function it appears in
make[4]: *** [drivers/gpu/drm/i915/intel_opregion.o] Error 1

introduced in
commit 91a60f20
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Thu Oct 31 18:55:48 2013 +0200

    drm/i915: move opregion asle request handling to a work queue
Reported-by: Jim Davis <jim.epost@gmail.com>
Reference: http://lkml.kernel.org/r/CA+r1ZhjcFpr5KKVX0pLCOP8cAyZoiYO=UyqYMJtNSV-Kt_p7xQ@mail.gmail.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 555b1b65.

Let's try this again for 3.13.  It's required for proper
interaction with alsa.  Was disabled previously in 3.12
to be on the safe side since it caused problems on older
asics.

In order to have any realistic chance of calculating proper
ACR values, we need to be able to calculate both N and CTS,
not just CTS. We still aim for the ideal N as specified in
the HDMI spec though.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The values were taken from the HDMI spec, but they assumed
exact x/1.001 clocks. Since we round the clocks, we also need
to calculate different N and CTS values.

Note that the N for 25.2/1.001 MHz at 44.1 kHz audio is out of
spec. Hopefully this mode is rarely used and/or HDMI sinks
tolerate overly large values of N.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Audio is enabled by default now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This adds the pci ids for hawaii.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>