- 27 Jun, 2017 2 commits
-
-
Cao Jin authored
ACPICA commit 45eb6384fb47f4fdc5759f63c47a9b6799924972 Link: https://github.com/acpica/acpica/commit/45eb6384Signed-off-by:
Cao Jin <caoj.fnst@cn.fujitsu.com> Signed-off-by:
Erik Schmauss <erik.schmauss@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 00906ae0aff4c6b76abc232ef99700e7d7c0e325 There are enough of these strings to justify a separate file. Also, these strings are only used for the disassembler and the debugger. Thus, this change improves ACPICA modularity. Link: https://github.com/acpica/acpica/commit/00906ae0Signed-off-by:
-
- 12 Jun, 2017 36 commits
-
-
Bob Moore authored
ACPICA commit a83f7212df71d4276d0057fa31bfdc9809660560 Removed an unnecessary status check after call to ns_build_normalized_path. Link: https://bugs.acpica.org/show_bug.cgi?id=1378 Link: https://github.com/acpica/acpica/commit/a83f7212Reported-by:
Colin King <colin.king@canonical.com> Signed-off-by:
-
Bob Moore authored
ACPICA commit ff09dcf9eb69fe9318034c60c377436030e7feea These interfaces are intended to be used by device drivers. Link: https://github.com/acpica/acpica/commit/ff09dcf9Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Bob Moore authored
ACPICA commit ed0389cb11a61e63c568ac1f67948fc6a7bd1aeb An invalid opcode indicates something seriously wrong with the input AML file. The AML parser is immediately confused and lost, causing the resulting parse tree to be ill-formed. The actual disassembly can then cause numerous unrelated errors and faults. This change aborts the disassembly upon discovery of such an opcode during the AML parse phase. Link: https://github.com/acpica/acpica/commit/ed0389cbSigned-off-by:
-
Lv Zheng authored
ACPICA commit eaa455accf165fee2df26410e271aab162264f6c UBSAN reports an index out of range use in dsutils.c. acpi_db_display_argument_object( walk_state->operands[walk_state->num_operands - 1], ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ walk_state); This call was simply wrong, generated redundant debugger messages, and resulted in a -1 index into the operand stack. Linux kernel bug #120351 (link #1) and #194845 (link #2). Originally fixed by Navin P.S. (link #1, comment 8), refined by Lv Zheng (link #3). Link: https://bugzilla.kernel.org/show_bug.cgi?id=120351 [#1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=194845 [#2] Link: https://github.com/acpica/acpica/pull/245 [#3] Link: https://github.com/acpica/acpica/commit/eaa455acReported-by:
Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Reported-by:
Ronald Warsow <rwarsow@gmx.de> Original-by:
Navin P.S. <navinp1912@gmail.com> Signed-off-by:
-
Bob Moore authored
ACPICA commit 0d792c25d3bcaa857920ec009b732ec7c8942cfa Clarify some of the error messages when a method failure happens. Link: https://github.com/acpica/acpica/commit/0d792c25Signed-off-by:
-
Erik Schmauss authored
ACPICA commit 4091360d6526c8d4f1e6bccb6b1c3123bda9ac33 The runtime errors caused when acpica tools are compiled with -fsanitize=shift imply that these 1s are stored in integers. This cast insures that 1 is stored in unsigned integers. Link: https://github.com/acpica/acpica/commit/4091360dSigned-off-by:
-
Bob Moore authored
ACPICA commit 7a6b9c0b31cfb1606a6348404fee670b2d18743c Improve/clarify the problem of a field definition beyond the limit of the target buffer. Link: https://github.com/acpica/acpica/commit/7a6b9c0bSigned-off-by:
-
Lv Zheng authored
ACPICA commit 99bc3beca92c6574ea1d69de42e54f872e6373ce It is reported that on Linux, RTC driver complains wrong errors on hardware reduced platform: [ 4.085420] ACPI Warning: Could not enable fixed event - real_time_clock (4) (20160422/evxface-654) This patch fixes this by correctly adding runtime reduced hardware check. Reported by Chandan Tagore, fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/99bc3becTested-by:
Chandan Tagore <tagore.chandan@gmail.com> Signed-off-by:
-
Lv Zheng authored
ACPICA commit e2df7455a9a4301b03668e4c9c02c7a564cc841c Some hosts may choose not to include stdarg.h, implementing a configurability in acgcc.h, allowing OSen like Solaris to exclude stdarg.h. This patch also fixes acintel.h accordingly without providing builtin support as Intel compiler is similar as GCC. Reported by Dana Myers, fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/e2df7455Reported-by:
Dana Myers <dana.myers@oracle.com> Signed-off-by:
-
Mika Westerberg authored
ACPICA commit 51a92f414de7af1f7f7524de3f61daf5413cac9f Acpiexec gives this warning when resources containing GPIOs are extracted using Resource command: **** Data mismatch in descriptor [00] type 8C, Offset 00000000 **** Mismatch at byte offset 13: is 00, should be 25 **** Data mismatch in descriptor [01] type 8C, Offset 00000025 **** Mismatch at byte offset 13: is 00, should be 25 This happens because we do not set VendorOffset when doing resource to AML conversion. Fix this by always setting VendorOffset. Link: https://github.com/acpica/acpica/commit/51a92f41Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Bob Moore authored
ACPICA commit 7cb6e66982178bbc96a6f1f7969da95e9da753fa An AML opcode type field was overlapped with values used for the top-level dispatch. Did not cause an actual problem, but fixed anyway. Link: https://github.com/acpica/acpica/commit/7cb6e669Signed-off-by:
-
Mika Westerberg authored
ACPICA commit 08b83591c0db751769d61fa889f4f50f575aeffb PinGroupConfig() is analogous to PinGroupFunction() but instead of mode (muxing), it is used to apply specific fine-grained configuration to a set of referenced pins. The format of this new resource is: PinGroupConfig (Shared/Exclusive, PinConfigType, PinConfigValue, ResourceSource, ResourceSourceIndex, ResourceSourceLabel, ResourceUsage, DescriptorName, VendorData) The PinConfigType/PinConfigValue are the same used by PinConfig() resource. Here also the combination of ResourceSource and ResourceSourceLabel is used to specify the PinGroup() this resource refers to. Link: https://github.com/acpica/acpica/commit/08b83591Signed-off-by: -
Mika Westerberg authored
ACPICA commit bd9a745749eac7137cd23085e6bdeb322de14ea2 PinGroupFunction() is a new resource introduced with ACPI 6.2. It is used with PinGroup() to configure specific mode for a set of pins exposed by a GPIO controller. The format of the resource is: PinGroupFunction (Shared/Exclusive, FunctionNumber, ResourceSource, ResourceSourceIndex, ResourceSourceLabel, ResourceUsage, DescriptorName, VendorData) The resource_source and ResourceSourceLabel fields are used to specify the PinGroup() resource referenced by PinGroupFunction(). Device (GPIO) { Name (_CRS, ResourceTemplate () { PinGroup ("group1") {2, 3} PinGroup ("group2") {4, 5} ... }) } Device (I2C) { Name (_CRS, ResourceTemplate () { PinGroupFunction (Exclusive, 6, "^GPIO", 0, "mygroup2") }) } In the above example the PinGroupFunction() references the second PinGroup() resource (using label "mygroup2" and configures pins 4 and 5 into mode 6. Link: https://github.com/acpica/acpica/commit/bd9a7457Signed-off-by: -
Mika Westerberg authored
ACPICA commit 7d928e3174fb19d7dc0066b03c30bea07c001563 ACPI 6.2 introduced a new resource that is used to declare set of pins belonging to a GPIO controller. This resource is referenced by new PinGroupFunction() and PinGroupConfig() resources using ResourceSource and ResourceLabel fields. The PinGroup() resource looks like this: PinGroup (ResourceLabel, ResourceUsage, DescriptorName, VendorData) {Pin List} This resource should be listed in _CRS under the GPIO/pincontroller device providing these pins. Link: https://github.com/acpica/acpica/commit/7d928e31Signed-off-by: -
Mika Westerberg authored
ACPICA commit a06fdba686cefccd5dd5b93b52fa0f1e3f984906 ACPI 6.2 introduced a new resource that is used to specify fine-grained configuration of a pin or set of pins used by a device. The ASL syntax of this new resource looks like: PinConfig (Shared/Exclusive, PinConfigType, PinConfigValue, ResourceSource, ResourceSourceIndex, ResourceUsage, DescriptorName, Vendordata) {Pin List} PinConfigType is an integer with following accepted values: 0x00 (Default) - No configuration is applied to the pin 0x01 (Bias Pull-up) - Pin is pulled up using certain size resistor 0x02 (Bias Pull-down) - Pin is pulled down using certain size resistor 0x03 (Bias Default) - Set to default biasing 0x04 (Bias Disable) - All bias settings will be disabled 0x05 (Bias High Impedance) - Configure the pin as hi_z 0x06 (Bias Bus Hold) - Configure the pin in a weak latch state where it drives the last value on a tristate bus 0x07 (Drive Open Drain) - Configure the pin into open drain state 0x08 (Drive Open Source) - Configure the pin into open source state 0x09 (Drive Push Pull) - Configure the pin into push-pull state 0x0a (Drive Strength) - How much the pin can supply current 0x0b (Slew Rate) - Configure slew rate of the pin 0x0c (Input Debounce) - Enable input debouncer for the pin 0x0d (Input Schmitt Trigger) - Enable schmitt trigger for the pin 0x0e - 0x7f - Reserved 0x80 - 0xff - Vendor defined types The PinConfigValue depends on the type and is expressed as units suitable for that type (for example bias uses Ohms). Link: https://github.com/acpica/acpica/commit/a06fdba6Signed-off-by: -
Mika Westerberg authored
ACPICA commit 6bbc6357f7061f1243601adde0ea45f7a89274e0 ACPI 6.2 introduced a new resource that is used to describe how certain pins are muxed for a device. The ASL syntax of this new resource looks like below: PinFunction(Shared, PinConfig, FunctionNumber, ResourceSource, ResourceSourceIndex, ResourceUsage, DescriptorName, VendorData) {Pin List} Which is pretty similar to GpioIo()/GpioInt() resources. Teach ACPICA about this new resource. Link: https://github.com/acpica/acpica/commit/6bbc6357Signed-off-by: -
David E. Box authored
ACPICA commit e7b817e3c405a4fb9ae9ee7ae4992b8c1f20d284 Extended PCC Subspaces (types 3 and 4) Link: https://github.com/acpica/acpica/commit/e7b817e3Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Signed-off-by:
-
Bob Moore authored
ACPICA commit b922ecaf9053dae3b8933664e951ed1ee8f86f07 Update to new version of the TCG/ACPI spec. Does not include table compiler or disassembler support. Link: https://github.com/acpica/acpica/commit/b922ecafSigned-off-by:
-
David E. Box authored
ACPICA commit 3c36625deffdfb034378b1793e2ead9c8fdd767e Changes the resource descriptor parse tree walk to a general preprocessing walk and calls the Switch conversion code from here. Move Switch code to new dmswitch.c file. Also improves algorithm to handle multiple levels of Switch statements and perform legacy disassembly for older or otherwise non-spec compliant Switch implementations. Link: https://github.com/acpica/acpica/commit/3c36625dSigned-off-by:
-
Bob Moore authored
ACPICA commit 5bc67f63918da249bfe279ee461d152bb3e6f55b GIC ITS Affinity (ACPI 6.2) Link: https://github.com/acpica/acpica/commit/5bc67f63Signed-off-by:
-
Bob Moore authored
ACPICA commit a1f1056c9e44fd3de8cad3bde89cda5cbb2df466 IA-32 Deferred Machine Check (ACPI 6.2) Link: https://github.com/acpica/acpica/commit/a1f1056cSigned-off-by:
-
Bob Moore authored
ACPICA commit c2c3807adb8a67e6462b731dc64be35d8b8317f8 Add GHES_ASSIST flag for ACPI 6.2 Add missing GLOBAL flag for AER structures Link: https://github.com/acpica/acpica/commit/c2c3807aSigned-off-by:
-
Lv Zheng authored
ACPICA commit c27465d07fd008ba71c1f687b2715267701bc8ad This patch adds PPTT (Processor Properties Topology Table, defined in ACPI spec 6.2) support in ACPICA core, including table definitions expressed in C structures and macros. Lv Zheng. Link: https://github.com/acpica/acpica/commit/c27465d0Signed-off-by:
-
Bob Moore authored
ACPICA commit 35e06462f3186e1e6e9cb4fe97dfb43d4b3718a2 "Software Delegated Exception" - ACPI 6.2 Link: https://github.com/acpica/acpica/commit/35e06462Signed-off-by:
-
Erik Schmauss authored
ACPICA commit 223a647c72243359231865a64c1be04d208dcdbd Link: https://github.com/acpica/acpica/commit/223a647cSigned-off-by:
-
Erik Schmauss authored
ACPICA commit 8e425bdd9fa27264c217a3a449eb3c2da3769542 Link: https://github.com/acpica/acpica/commit/8e425bddSigned-off-by:
-
Erik Schmauss authored
ACPICA commit 89020347ada3f0ff5499a804178d574359e4730f Link: https://github.com/acpica/acpica/commit/89020347Signed-off-by:
-
Erik Schmauss authored
ACPICA commit f2f3813fb6b6a6ec1f406f05061c0e9270e86146 Link: https://github.com/acpica/acpica/commit/f2f3813fSigned-off-by:
-
Janosch Hildebrand authored
ACPICA commit c0292548a43bdc5d83d5be2953b663e60b6f12b4 Link: https://github.com/acpica/acpica/issues/224 Link: https://github.com/acpica/acpica/commit/c0292548Signed-off-by:
Janosch Hildebrand <jnosh+git@jnosh.com> Signed-off-by:
-
Bob Moore authored
ACPICA commit dbc6a3d5ff22df730cc81802af0422bb64b19347 Orientation flags added. ACPI 6.2 Link: https://github.com/acpica/acpica/commit/dbc6a3d5Signed-off-by:
-
Bob Moore authored
ACPICA commit 54eb9be35414847da7e2903c8d410fa806b44fb5 0x0C (Graceful shutdown) is now reverted to reserved. 0x81 takes the place of this value. Link: https://github.com/acpica/acpica/commit/54eb9be3Signed-off-by:
-
Bob Moore authored
ACPICA commit a0168a7aca421d195e1c2b609279fa4a967dd3ac Processor Properties. ACPI 6.2 Link: https://github.com/acpica/acpica/commit/a0168a7aSigned-off-by:
-
Bob Moore authored
ACPICA commit d37e878292bc9c7835b74e90d1c4c79e96ce6652 New notify value for memory attributes update for ACPI 6.2. Link: https://github.com/acpica/acpica/commit/d37e8782Signed-off-by:
-
Lv Zheng authored
ACPICA commit 3dae756631c8c2baddfa19f43a379aee42b28312 This patch adds unified HMAT table structure definitions so that ACPICA users can develop HMAT related OS features based on the ACPICA standard structures. Lv Zheng. Link: https://github.com/acpica/acpica/commit/3dae7566Signed-off-by:
-
Lv Zheng authored
ACPICA commit 4f12387029c6a561e7792f53caf2e7f1f0ab2bbe This patch adds WSMT support, the table can be found at Line [#1]. The support includes table structure definitions (ACPICA tables) and assembly/disassembly (iasl) support. Lv Zheng. Link: https://github.com/acpica/acpica/commit/4f123870 Link: https://msdn.microsoft.com/windows/hardware/drivers/bringup/acpi-system-description-tables#wsmt [1] Signed-off-by:
-
Erik Schmauss authored
ACPICA commit 51e73c1d35dd21cfe39277b3c71decd3268f669c All instances using a named parseOp's path field has a type cast from u8* to char*. Changing path's type from u8* to char* eliminates type casting and retains the previous behavior. Link: https://github.com/acpica/acpica/commit/51e73c1dSigned-off-by:
-
- 11 Jun, 2017 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull key subsystem fixes from James Morris: "Here are a bunch of fixes for Linux keyrings, including: - Fix up the refcount handling now that key structs use the refcount_t type and the refcount_t ops don't allow a 0->1 transition. - Fix a potential NULL deref after error in x509_cert_parse(). - Don't put data for the crypto algorithms to use on the stack. - Fix the handling of a null payload being passed to add_key(). - Fix incorrect cleanup an uninitialised key_preparsed_payload in key_update(). - Explicit sanitisation of potentially secure data before freeing. - Fixes for the Diffie-Helman code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) KEYS: fix refcount_inc() on zero KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API crypto : asymmetric_keys : verify_pefile:zero memory content before freeing KEYS: DH: add __user annotations to keyctl_kdf_params KEYS: DH: ensure the KDF counter is properly aligned KEYS: DH: don't feed uninitialized "otherinfo" into KDF KEYS: DH: forbid using digest_null as the KDF hash KEYS: sanitize key structs before freeing KEYS: trusted: sanitize all key material KEYS: encrypted: sanitize all key material KEYS: user_defined: sanitize key payloads KEYS: sanitize add_key() and keyctl() key payloads KEYS: fix freeing uninitialized memory in key_update() KEYS: fix dereferencing NULL payload with nonzero length KEYS: encrypted: use constant-time HMAC comparison KEYS: encrypted: fix race causing incorrect HMAC calculations KEYS: encrypted: fix buffer overread in valid_master_desc() KEYS: encrypted: avoid encrypting/decrypting stack buffers KEYS: put keyring if install_session_keyring_to_cred() fails KEYS: Delete an error message for a failed memory allocation in get_derived_key() ...
-
