- 23 Jan, 2017 16 commits
-
-
Chris Wilson authored
This w/a (WaDisableCtxRestoreArbitration) was only used for preproduction hw, which is no longer in use. Remove the workaround to simplify the code. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170123130601.2281-3-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
This w/a was only used for preproduction hw, which is no longer in use. Remove the workaround to simplify the code. Signed-off-by:
-
Chris Wilson authored
This w/a (WaEnableForceRestoreInCtxtDescForVCS) was only used for preproduction hw, which is no longer in use. Remove the workaround to simplify the code. Signed-off-by:
-
Chris Wilson authored
Since tweaking i915_vma_compare() we allowed constructors to skip clearing the ggtt_view believing that we didn't access the unused members. That, as it turns out, was not entirely true. In particular, i915_gem_fault() uses ret = remap_io_mapping(area, area->vm_start + (vma->ggtt_view.partial.offset << PAGE_SHIFT), (ggtt->mappable_base + vma->node.start) >> PAGE_SHIFT, min_t(u64, vma->size, area->vm_end - area->vm_start), &ggtt->mappable); i.e. the ggtt_view.partial for both normal and partial views. If we allowed garbage into the normal vma->ggtt_view and then try userspace tried to mmap it, we could explode in an unobvious fashion. Fixes: 7b92c047 ("drm/i915: Eliminate superfluous i915_ggtt_view_rotated") Fixes: 3bf4d575 ("drm/i915: Stop clearing i915_ggtt_view") Reported-by:Matthew Auld <matthew.william.auld@gmail.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
-
Maarten Lankhorst authored
This reverts commit 527b6abe (Revert "drm/i915: Use atomic commits for legacy page_flips") and reapplies commit ee042aa4. ("drm/i915: Use atomic commits for legacy page_flips") The reason for the revert was because legacy cursor updates were forced to wait for pending page flips and rendering after they were converted to atomic. Commit f79f2692 (drm/i915: Add a cursor hack to allow converting legacy page flip to atomic, v3) adds a fastpath to cursor updates, which fixes the stuttering issues. With these changes I feel confident enough to re-enable cursor updates. Legacy cursor update won't block in the following cases: - Moving cursor - Changing cursor fb The legacy cursor update will still block in the following cases: - Showing/hiding cursor. - Cursor size or scaling changes. - cursor update while cursor is invisible (could be fixed, if it turns out to be important). - Cursor tiling changes (Not sure we support tiled cursors.) - Last update was a modeset. Cc: Steven Newbury <steve@snewbury.org.uk> Cc: Rafael Ristovski <rafael.ristovski@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by:
Rafael Ristovski <rafael.ristovski@gmail.com> Testcase: igt/kms_cursor_legacy Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
When execlists signals the context completion, it also provides the context id for the status event. Assert that id matches the one we expect. v2: The upper dword of the context status is a duplicate of the upper dword from elsp submission (i.e. includes the group id as well as the context id). Include this check as well. v3: Only check against lrc_desc (as this contains the hw_id check) Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170123113132.18665-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
For easy recognisability, we want the kernel context to have id 0 and all user contexts to have non-zero ids. Signed-off-by:
-
Chris Wilson authored
Ensure that the hangcheck is queued even in the absence of interrupts. Signed-off-by:
-
Geliang Tang authored
To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/b08fd4be9d4c45d88c158a17b854c3fd628840ed.1484816339.git.geliangtang@gmail.comReviewed-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_csr.c: In function ‘csr_load_work_fn’: drivers/gpu/drm/i915/intel_csr.c:399:6: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable] Signed-off-by:
-
Chris Wilson authored
Move the intel_fake_agp_sizes array into the same #ifdef block as it is used to avoid instantiation when not used, and so triggering a compiler warning drivers/char/agp/intel-gtt.c:335:42: warning: ‘intel_fake_agp_sizes’ defined but not used [-Wunused-const-variable=] Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Ander Conselvan de Oliveira authored
In intel_crtc_disable_noatomic(), bail on a failure to allocate an atomic state to avoid a NULL pointer dereference. Fixes: 4a806558 ("drm/i915: Pass atomic state to crtc enable/disable functions") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484922525-6131-4-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Ander Conselvan de Oliveira authored
Parameters tile_size, tile_width and tile_height were passed in the wrong order to _intel_adjust_tile_offset() when calculating the rotated offsets. This doesn't fix any user visible bug, since for packed formats new and old offset are the same and the rotated offsets are within a tile before they are fed to _intel_adjust_tile_offset(). In that case, the offsets are unchanged. That is not true for planar formats, but those are currently not supported. Fixes: 66a2d927 ("drm/i915: Make intel_adjust_tile_offset() work for linear buffers") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
-
Ander Conselvan de Oliveira authored
An error in the condition for avoiding the call to intel_hpd_poll_init() for valleyview and cherryview from intel_runtime_suspend() caused it to be called unconditionally. Fix it. Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd") Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lyude <cpaul@redhat.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
-
Ander Conselvan de Oliveira authored
In the path where intel_crt_detect_ddc() detects a CRT, if would return true without freeing the edid. Fixes: a2bd1f54 ("drm/i915: check whether we actually received an edid in detect_ddc") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.6+ Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:
-
- 21 Jan, 2017 7 commits
-
-
Daniele Ceraolo Spurio authored
The call went away in: commit 3b16525c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Aug 4 16:32:25 2016 +0100 drm/i915: Split insertion/binding of an object into the VM It is useful to have this trace as it pairs nicely with the vma_unbind one to track vma activity. Added inside the i915_vma_bind function (was outside before) to keep a similar placement as trace_i915_vma_unbind. v2: print bind_flags instead of flags (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484949083-11430-1-git-send-email-daniele.ceraolospurio@intel.comReviewed-by:
-
Chris Wilson authored
VMA (and their objects) are supposed to composed of whole pages. Add an assert to catch any invalid construct when we create the VMA. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170119192659.31789-6-chris@chris-wilson.co.ukReviewed-by:
-
Chris Wilson authored
Before moving the vma between the VM active/inactive lists, assert that the node is still allocated. Signed-off-by:
-
Chris Wilson authored
When pinning into the global GTT, an error from creating the VMA is unlikely, so mark it so. Signed-off-by:
-
Chris Wilson authored
Disallow creation of a vma that is larger than the available address space, or triggers an overflow on fence expansion. Testcase: igt/gem_exec_reloc/gtt-32 Signed-off-by:
-
Chris Wilson authored
Now that i915_gem_object_bump_inactive_ggtt() exists, also make use of it for the LRU bumping from i915_gem_object_unpin_from_display() Signed-off-by:
-
Chris Wilson authored
Since a change in cache level is likely to trigger an unbind, avoid waiting under the mutex by preemptively doing an unlocked wait. Signed-off-by:
-
- 20 Jan, 2017 3 commits
-
-
Michał Winiarski authored
HuC firmware is mapped at GuC accessible range. Let's add an assert to verify that. Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170120192348.2049-2-michal.winiarski@intel.comSigned-off-by:
-
Michał Winiarski authored
HuC authentication is called even if HuC firmware is not present in the system, leading to NULL ptr dereference on not allocated gem_object. Let's avoid trying to authenticate HuC if its firmware is not loaded successfully. Fixes: dac84a38 ("drm/i915/huc: Support HuC authentication") v2: Check inside the auth function, split the assert (Michał) v3: Oops, hit send before compiling, s/huc_fw/huc->fw Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Sagar Arun Kamble authored
When we reach the user's RPS limits, stop requesting an adjustment. Even though we will clamp the requested frequency later, we rely on interrupt masking to disable further adjustments in the same direction. Even though it is unlikely (one scenario is a bug in the driver, another is careful manipulation through the uAPI) if we keep exponentially increasing the adjustment value, it will wrap and cause a negative adjustment. Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484884104-28134-2-git-send-email-sagar.a.kamble@intel.com
-
- 19 Jan, 2017 14 commits
-
-
Ville Syrjälä authored
We're trying to copy the flags from the adjusted mode to the passed in mode twice. Once is enough. Signed-off-by:
-
Ville Syrjälä authored
crtc->config is on its way out. Let's reduce our dependence on it a little bit by removing it from intel_modeset_readout_hw_state(). Also replace crtc->acttive checks with crtc_state->base.active checks. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Suggested-by:
-
Chris Wilson authored
After we call drm_atomic_commit() on the load-detect state, we can free our local reference. Upon restore, we only apply and free the previous state. Fixes: 0853695c ("drm: Add reference counting to drm_atomic_state") Signed-off-by:
-
Chris Wilson authored
With the last user of this convenience wrapper gone, we can kill the wrapper and in the process make the lookup function static. Signed-off-by:
-
Chris Wilson authored
With the introduce of i915_vma_instance() for obtaining the VMA singleton for a (obj, vm, view) tuple, we can remove the i915_vma_create() in favour of a single entry point. We do incur a lookup onto an empty tree, but the i915_vma_create() were being called infrequently and during initialisation, so the small overhead is negligible. v2: Drop the i915_ prefix from the now static vma_create() function Signed-off-by:
-
Chris Wilson authored
Just as added paranoia against our future-selves add another check that the lookup/created VMA instance matches the request. Signed-off-by:
-
Chris Wilson authored
Whilst writing testcases to exercise the VMA API, some oddities came to light, such as i915_gem_obj_lookup_or_create(). Joonas suggested i915_vma_instance() as a neat replacement, so rename them, move them to i915_vma.c and add some kerneldoc as a sugary bonus. s/i915_gem_obj_to_vma/i915_vma_lookup/ s/i915_gem_obj_lookup_or_create_vma/i915_vma_instance/ Suggested-by:
-
Chris Wilson authored
With atomic plane states we are able to track an allocation right from preparation, during use and through to the final free after being swapped out for a new plane. We can couple the VMA we pin for the framebuffer (and its rotation) to this lifetime and avoid all the clumsy lookups in between. v2: Remove residual vma on plane cleanup (Chris) v3: Add a description for the vma destruction in intel_plane_destroy_state (Maarten) References: https://bugs.freedesktop.org/show_bug.cgi?id=98829Signed-off-by: -
Anusha Srivatsa authored
This patch will allow for getparams to return the status of the HuC. As the HuC has to be validated by the GuC this patch uses the validated status to show when the HuC is loaded and ready for use. You cannot use the loaded status as with the GuC as the HuC is verified after it is loaded and is not usable until it is verified. v2: removed the forewakes as the registers are already force-woken. (T.Ursulin) v3: rebased on top of drm-tip. Removed any reference to intel_huc.h v4: rebased. Rename I915_PARAM_HAS_HUC to I915_PARAM_HUC_STATUS. Remove intel_is_huc_valid() since it is used only in one place. Put the case of I915_PARAM_HAS_HUC() in the right place. v5: rebased. Add a comment to specify that I915_READ(reg) does not read garbage value. The register HUC_STATUS2 is force woken and no rpm is needed. Signed-off-by:Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Peter Antoine <peter.antoine@intel.com> Reviewed-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
The HuC authentication is done by host2guc call. The HuC RSA keys are sent to GuC for authentication. v2: rebased on top of drm-tip. Changed name format and upped version 1.7. v3: changed wait_for_atomic to wait_for v4: rebased. Rename intel_huc_auh() to intel_guc_auth_huc() and place the prototype in intel_guc.h,correct the comments. v5: rebased. Moved intel_guc_auth_huc from i915_guc_submission.c to intel_uc.c.Update dev to dev_priv in intel_guc_auth_huc(). Renamed HOST2GUC_ACTION_AUTHENTICATE_HUC TO INTEL_GUC_ACTION_ AUTHENTICATE_HUC v6: rebased. Add newline on DRM_ERRORs that already dont have one. v7: rebased. Replace wait_for with intel_wait_for_register() since the latter employs sleep optimisations for quick responses- as pointed out by Chris Wilson. v8: rebased. Cleanup the intel_guc_auth_huc() by removing checks already performed in earlier functions. Make comments more descriptive. v9: rebased. Changed the bias for pinning the HuC object. Move intel_guc_auth_huc() to intel_huc.c. Change DRM_DEBUGs to DRM_ERRORs in intel_guc_auth_huc(). Add return status to DRM_ERRORs. v10: Remove message not required for the user.. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by:
Xiang Haihao <haihao.xiang@intel.com> Signed-off-by:
Alex Dai <yu.dai@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Add debugfs entry for HuC loading status check. v2: rebased on top of drm-tip. Cc: Michal wajdeczko <michal.wajdeczko@intel.com> Tested-by:
Jeff McGee <jeff.mcgee@intel.com> Reviewed-by:
-
Anusha Srivatsa authored
This patch adds the support to load HuC on KBL Version 2.0 v2: rebased on top of drm-tip. Rename KBL_FW_ to KBL_HUC_FW_ v3: rebased. Remove old checks. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Anusha Srivatsa authored
This patch adds the HuC Loading for the BXT by using the updated file construction. Version 1.7 of the HuC firmware. v2: rebased on to top drm-tip. Rename BXT_FW_MAJOR to BXT_HUC_FW_ Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Anusha Srivatsa authored
The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases. HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them. v2: rebased on-top of drm-intel-nightly. removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format. v3: rebased to drm-intel-nightly, changed the file name format to match the one in the huc package. Changed dev->dev_private to to_i915() v4: moved function back to where it was. change wait_for_atomic to wait_for. v5: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern. v6: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in- https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin> v7: Change dev to dev_priv in macro definition. Corrected comments. v8: rebased on top of drm-tip. Updated functions intel_huc_load(), intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents of intel_huc.h to intel_uc.h. v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size(). Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to simply fw to avoid redundency. v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv instead of dev like intel_huc_init() and intel_huc_load().Move definition to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable WARNs to give extra info. v11: rebased. Add proper bias for HuC and make sure there are asserts on failure by using guc_ggtt_offset_vma(). Introduce intel_huc.c and remove intel_huc_loader.c since it has functions that do more than just loading.Correct year in copyright. v12: remove invalidates that are not required anymore. Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by:
-
