- 08 Dec, 2021 20 commits
-
-
Colin Foster authored
Move these to a separate file will allow them to be shared to other drivers. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Colin Foster authored
Add an interface so that non-mmio regmaps can be used Signed-off-by:
-
Colin Foster authored
Existing felix devices all have an initialized pcs array. Future devices might not, so running a NULL check on the array before dereferencing it will allow those future drivers to not crash at this point Signed-off-by:
-
Colin Foster authored
The pci_bar variables for the switch and imdio don't make sense for the generic felix driver. Moving them to felix_vsc9959 to limit scope and simplify the felix_info struct. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211206091207.113648-1-colin.i.king@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.17 First set of patches for v5.17. The biggest change is the iwlmei driver for Intel's AMT devices. Also now WCN6855 support in ath11k should be usable. Major changes: ath10k * fetch (pre-)calibration data via nvmem subsystem ath11k * enable 802.11 power save mode in station mode for qca6390 and wcn6855 * trace log support * proper board file detection for WCN6855 based on PCI ids * BSS color change support rtw88 * add debugfs file to force lowest basic rate * add quirk to disable PCI ASPM on HP 250 G7 Notebook PC mwifiex * add quirk to disable deep sleep with certain hardware revision in Surface Book 2 devices iwlwifi * add iwlmei driver for co-operating with Intel's Active Management Technology (AMT) devices * tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (87 commits) iwlwifi: mei: fix linking when tracing is not enabled rtlwifi: rtl8192de: Style clean-ups mwl8k: Use named struct for memcpy() region intersil: Use struct_group() for memcpy() region libertas_tf: Use struct_group() for memcpy() region libertas: Use struct_group() for memcpy() region wlcore: no need to initialise statics to false rsi: Fix out-of-bounds read in rsi_read_pkt() rsi: Fix use-after-free in rsi_rx_done_handler() brcmfmac: Configure keep-alive packet on suspend wilc1000: remove '-Wunused-but-set-variable' warning in chip_wakeup() iwlwifi: mvm: read the rfkill state and feed it to iwlmei iwlwifi: mvm: add vendor commands needed for iwlmei iwlwifi: integrate with iwlmei iwlwifi: mei: add debugfs hooks iwlwifi: mei: add the driver to allow cooperation with CSME mei: bus: add client dma interface mwifiex: Ignore BTCOEX events from the 88W8897 firmware mwifiex: Ensure the version string from the firmware is 0-terminated mwifiex: Add quirk to disable deep sleep with certain hardware revision ... ==================== Link: https://lore.kernel.org/r/20211207144211.A9949C341C1@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: second round of netdevice refcount tracking The most interesting part of this series is probably ("inet: add net device refcount tracker to struct fib_nh_common") but only future reports will confirm this guess. ==================== Link: https://lore.kernel.org/r/20211207013039.1868645-1-eric.dumazet@gmail.comSigned-off-by: -
Eric Dumazet authored
Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Add a netdevice_tracker inside struct net_device, to track the self reference when a device has an active watchdog timer. Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
- 07 Dec, 2021 20 commits
-
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: New features for MPTCP sockets and netlink PM This collection of patches adds MPTCP socket support for a few socket options, ioctls, and one ancillary data type (specifics for each are listed below). There's also a patch modifying the netlink MPTCP path manager API to allow setting the backup flag on a configured interface using the endpoint ID instead of the full IP address. Patches 1 & 2: TCP_INQ cmsg and selftests. Patches 2 & 3: SIOCINQ, OUTQ, and OUTQNSD ioctls and selftests. Patch 5: Change backup flag using endpoint ID. Patches 6 & 7: IP_TOS socket option and selftests. Patches 8-10: TCP_CORK and TCP_NODELAY socket options. Includes a tcp change to expose __tcp_sock_set_cork() and __tcp_sock_set_nodelay() for use by MPTCP. ==================== Link: https://lore.kernel.org/r/20211203223541.69364-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Maxim Galaganov authored
First, add cork and nodelay fields to the mptcp_sock structure so they can be used in sync_socket_options(), and fill them on setsockopt while holding the msk socket lock. Then, on setsockopt set proper tcp_sk(ssk)->nonagle values for subflows by calling __tcp_sock_set_cork() or __tcp_sock_set_nodelay() on the ssk while holding the ssk socket lock. tcp_push_pending_frames() will be invoked on the ssk if a cork was cleared or nodelay was set. Also set MPTCP_PUSH_PENDING bit by calling mptcp_check_and_set_pending(). This will lead to __mptcp_push_pending() being called inside mptcp_release_cb() with new tcp_sk(ssk)->nonagle. Also add getsockopt support for TCP_CORK and TCP_NODELAY. Acked-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Maxim Galaganov <max@internet.ru> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Maxim Galaganov authored
Expose the mptcp_check_and_set_pending() function for use inside MPTCP sockopt code. The next patch will call it when TCP_CORK is cleared or TCP_NODELAY is set on the MPTCP socket in order to push pending data from mptcp_release_cb(). Acked-by:
-
Maxim Galaganov authored
Expose __tcp_sock_set_cork() and __tcp_sock_set_nodelay() for use in MPTCP setsockopt code -- namely for syncing MPTCP socket options with subflows inside sync_socket_options() while already holding the subflow socket lock. Acked-by:
-
Florian Westphal authored
Check that getsockopt(IP_TOS) returns what setsockopt(IP_TOS) did set right before. Also check that socklen_t == 0 and -1 input values match those of normal tcp sockets. Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
earlier patch added IP_TOS setsockopt support, this allows to get the value set by earlier setsockopt. Extends mptcp_put_int_option to handle u8 input/output by adding required cast. Reviewed-by:
-
Davide Caratti authored
a non-zero 'id' is sufficient to identify MPTCP endpoints: allow changing the value of 'backup' bit by simply specifying the endpoint id. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Florian Westphal authored
client & server use a unix socket connection to communicate outside of the mptcp connection. This allows the consumer to know in advance how many bytes have been (or will be) sent by the peer. This allows stricter checks on the bytecounts reported by TCP_INQ cmsg. Suggested-by:
-
Florian Westphal authored
Allows to query in-sequence data ready for read(), total bytes in write queue and total bytes in write queue that have not yet been sent. v2: remove unneeded READ_ONCE() (Paolo Abeni) v3: check for new data unconditionally in SIOCINQ ioctl (Mat Martineau) Signed-off-by:
-
Florian Westphal authored
Do checks on the returned inq counter. Fail on: 1. Huge value (> 1 kbyte, test case files are 1 kb) 2. last hint larger than returned bytes when read was short 3. erronenous indication of EOF. 3) happens when a hint of X bytes reads X-1 on next call but next recvmsg returns more data (instead of EOF). Signed-off-by:
-
Florian Westphal authored
Support the TCP_INQ setsockopt. This is a boolean that tells recvmsg path to include the remaining in-sequence bytes in the cmsg data. v2: do not use CB(skb)->offset, increment map_seq instead (Paolo Abeni) v3: adjust CB(skb)->map_seq when taking skb from ofo queue (Paolo Abeni) Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/224Signed-off-by:
-
Eric Dumazet authored
vrf_rt6_release() and vrf_rtable_release() changes dst->dev Instead of dev_hold(ndev); dev_put(odev); We should use dev_replace_track(odev, ndev, &dst->dev_tracker, GFP_KERNEL); If we do not transfer dst->dev_tracker to the new device, we will get warnings from ref_tracker_dir_exit() when odev is finally dismantled. Fixes: 9038c320 ("net: dst: add net device refcount tracking to dst_entry") Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211207055603.1926372-1-eric.dumazet@gmail.comSigned-off-by:
-
Tony Lu authored
Currently, buffers are cleared when smc connections are created and buffers are reused. This slows down the speed of establishing new connections. In most cases, the applications want to establish connections as quickly as possible. This patch moves memset() from connection creation path to release and buffer unuse path, this trades off between speed of establishing and release. Test environments: - CPU Intel Xeon Platinum 8 core, mem 32 GiB, nic Mellanox CX4 - socket sndbuf / rcvbuf: 16384 / 131072 bytes - w/o first round, 5 rounds, avg, 100 conns batch per round - smc_buf_create() use bpftrace kprobe, introduces extra latency Latency benchmarks for smc_buf_create(): w/o patch : 19040.0 ns w/ patch : 1932.6 ns ratio : 10.2% (-89.8%) Latency benchmarks for socket create and connect: w/o patch : 143.3 us w/ patch : 102.2 us ratio : 71.3% (-28.7%) The latency of establishing connections is reduced by 28.7%. Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Reviewed-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20211203113331.2818873-1-kgraul@linux.ibm.comSigned-off-by:
-
Guangbin Huang authored
This reverts commit 5ac4f180. Sorry for taking no notice that the function devlink_register() has been already declared as void, so it is needs to revert this patch. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/20211204012448.51360-1-huangguangbin2@huawei.comSigned-off-by:
-
José Expósito authored
One-element and zero-length arrays are deprecated and should be replaced with flexible-array members: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays Replace zero-length array with flexible-array member and make use of the struct_size() helper. Link: https://github.com/KSPP/linux/issues/78Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Reviewed-by:
Volodymyr Mytnyk <vmytnyk@marvell.com> Tested-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20211204171349.22776-1-jose.exposito89@gmail.comSigned-off-by:
-
Arnd Bergmann authored
The iosm driver started using relayfs, but is missing the Kconfig logic to ensure it's built into the kernel: x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_create_buf_file_handler': iosm_ipc_trace.c:(.text+0x16): undefined reference to `relay_file_operations' x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_subbuf_start_handler': iosm_ipc_trace.c:(.text+0x31): undefined reference to `relay_buf_full' x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_ctrl_file_write': iosm_ipc_trace.c:(.text+0xd5): undefined reference to `relay_flush' x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_port_rx': Fixes: 00ef3256 ("net: wwan: iosm: device trace collection using relayfs") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Link: https://lore.kernel.org/r/20211204174033.950528-1-arnd@kernel.orgSigned-off-by:
-
Eric Dumazet authored
Vladimir reported csum issues after my recent change in skb_postpull_rcsum() Issue here is the following: initial skb->csum is the csum of [part to be pulled][rest of packet] Old code: skb->csum = csum_sub(skb->csum, csum_partial(pull, pull_length, 0)); New code: skb->csum = ~csum_partial(pull, pull_length, ~skb->csum); This is broken if the csum of [pulled part] happens to be equal to skb->csum, because end result of skb->csum is 0 in new code, instead of being 0xffffffff David Laight suggested to use skb->csum = -csum_partial(pull, pull_length, -skb->csum); I based my patches on existing code present in include/net/seg6.h, update_csum_diff4() and update_csum_diff16() which might need a similar fix. I guess that my tests, mostly pulling 40 bytes of IPv6 header were not providing enough entropy to hit this bug. v2: added wsum_negate() to make sparse happy. Fixes: 29c30026 ("net: optimize skb_postpull_rcsum()") Fixes: 0bd28476 ("gro: optimize skb_gro_postpull_rcsum()") Signed-off-by:
David Laight <David.Laight@ACULAB.COM> Cc: David Lebrun <dlebrun@google.com> Tested-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: add preliminary netdev refcount tracking Two first patches add a generic infrastructure, that will be used to get tracking of refcount increments/decrements. The general idea is to be able to precisely pair each decrement with a corresponding prior increment. Both share a cookie, basically a pointer to private data storing stack traces. The third patch adds dev_hold_track() and dev_put_track() helpers (CONFIG_NET_DEV_REFCNT_TRACKER) Then a series of 20 patches converts some dev_hold()/dev_put() pairs to new hepers : dev_hold_track() and dev_put_track(). Hopefully this will be used by developpers and syzbot to root cause bugs that cause netdevice dismantles freezes. With CONFIG_PCPU_DEV_REFCNT=n option, we were able to detect some class of bugs, but too late (when too many dev_put() were happening). Another series will be sent after this one is merged. v3: moved NET_DEV_REFCNT_TRACKER to net/Kconfig.debug added "depends on DEBUG_KERNEL && STACKTRACE_SUPPORT" to hopefully get rid of kbuild reports for ARCH=nios2 Reworded patch 3 changelog. Added missing htmldocs (Jakub) v2: added four additional patches, added netdev_tracker_alloc() and netdev_tracker_free() addressed build error (kernel bots), use GFP_ATOMIC in test_ref_tracker_timer_func() ==================== Link: https://lore.kernel.org/r/20211205042217.982127-1-eric.dumazet@gmail.comSigned-off-by: -
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
