Skip to content

L
linux
Switch branch/tag
  1. 19 Jul, 2012 1 commit
  3. 15 Jul, 2012 8 commits
    • Theodore Ts'o's avatar
      random: add tracepoints for easier debugging and verification · 00ce1db1
      Theodore Ts'o authored 
      Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      00ce1db1
    • Theodore Ts'o's avatar
      random: add new get_random_bytes_arch() function · c2557a30
      Theodore Ts'o authored 
      Create a new function, get_random_bytes_arch() which will use the
architecture-specific hardware random number generator if it is
present.  Change get_random_bytes() to not use the HW RNG, even if it
is avaiable.

The reason for this is that the hw random number generator is fast (if
it is present), but it requires that we trust the hardware
manufacturer to have not put in a back door.  (For example, an
increasing counter encrypted by an AES key known to the NSA.)

It's unlikely that Intel (for example) was paid off by the US
Government to do this, but it's impossible for them to prove otherwise
--- especially since Bull Mountain is documented to use AES as a
whitener.  Hence, the output of an evil, trojan-horse version of
RDRAND is statistically indistinguishable from an RDRAND implemented
to the specifications claimed by Intel.  Short of using a tunnelling
electronic microscope to reverse engineer an Ivy Bridge chip and
disassembling and analyzing the CPU microcode, there's no way for us
to tell for sure.

Since users of get_random_bytes() in the Linux kernel need to be able
to support hardware systems where the HW RNG is not present, most
time-sensitive users of this interface have already created their own
cryptographic RNG interface which uses get_random_bytes() as a seed.
So it's much better to use the HW RNG to improve the existing random
number generator, by mixing in any entropy returned by the HW RNG into
/dev/random's entropy pool, but to always _use_ /dev/random's entropy
pool.

This way we get almost of the benefits of the HW RNG without any
potential liabilities.  The only benefits we forgo is the
speed/performance enhancements --- and generic kernel code can't
depend on depend on get_random_bytes() having the speed of a HW RNG
anyway.

For those places that really want access to the arch-specific HW RNG,
if it is available, we provide get_random_bytes_arch().
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
      c2557a30
    • Theodore Ts'o's avatar
      random: use the arch-specific rng in xfer_secondary_pool · e6d4947b
      Theodore Ts'o authored 
      If the CPU supports a hardware random number generator, use it in
xfer_secondary_pool(), where it will significantly improve things and
where we can afford it.

Also, remove the use of the arch-specific rng in
add_timer_randomness(), since the call is significantly slower than
get_cycles(), and we're much better off using it in
xfer_secondary_pool() anyway.
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
      e6d4947b
    • Theodore Ts'o's avatar
      net: feed /dev/random with the MAC address when registering a device · 7bf23575
      Theodore Ts'o authored 
      Cc: David Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
      7bf23575
    • Theodore Ts'o's avatar
      usb: feed USB device information to the /dev/random driver · b04b3156
      Theodore Ts'o authored 
      Send the USB device's serial, product, and manufacturer strings to the
/dev/random driver to help seed its pools.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: default avatarGreg KH <greg@kroah.com>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
      b04b3156
    • Linus Torvalds's avatar
      random: create add_device_randomness() interface · a2080a67
      Linus Torvalds authored 
      Add a new interface, add_device_randomness() for adding data to the
random pool that is likely to differ between two devices (or possibly
even per boot).  This would be things like MAC addresses or serial
numbers, or the read-out of the RTC. This does *not* add any actual
entropy to the pool, but it initializes the pool to different values
for devices that might otherwise be identical and have very little
entropy available to them (particularly common in the embedded world).

[ Modified by tytso to mix in a timestamp, since there may be some
  variability caused by the time needed to detect/configure the hardware
  in question. ]
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
      a2080a67
    • Theodore Ts'o's avatar
      random: use lockless techniques in the interrupt path · 902c098a
      Theodore Ts'o authored 
      The real-time Linux folks don't like add_interrupt_randomness() taking
a spinlock since it is called in the low-level interrupt routine.
This also allows us to reduce the overhead in the fast path, for the
random driver, which is the interrupt collection path.
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
      902c098a
    • Theodore Ts'o's avatar
      random: make 'add_interrupt_randomness()' do something sane · 775f4b29
      Theodore Ts'o authored 
      We've been moving away from add_interrupt_randomness() for various
reasons: it's too expensive to do on every interrupt, and flooding the
CPU with interrupts could theoretically cause bogus floods of entropy
from a somewhat externally controllable source.

This solves both problems by limiting the actual randomness addition
to just once a second or after 64 interrupts, whicever comes first.
During that time, the interrupt cycle data is buffered up in a per-cpu
pool.  Also, we make sure the the nonblocking pool used by urandom is
initialized before we start feeding the normal input pool.  This
assures that /dev/urandom is returning unpredictable data as soon as
possible.

(Based on an original patch by Linus, but significantly modified by
tytso.)
Tested-by: default avatarEric Wustrow <ewust@umich.edu>
Reported-by: default avatarEric Wustrow <ewust@umich.edu>
Reported-by: default avatarNadia Heninger <nadiah@cs.ucsd.edu>
Reported-by: default avatarZakir Durumeric <zakir@umich.edu>
Reported-by: J. Alex Halderman <jhalderm@umich.edu>.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
      775f4b29
  5. 06 Jul, 2012 1 commit
  7. 30 Jun, 2012 13 commits
  9. 29 Jun, 2012 13 commits
  11. 28 Jun, 2012 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7