- 20 Oct, 2020 1 commit
-
-
Ulf Hansson authored
The __raw_notifier_call_chain() was recently removed and replaced with raw_notifier_call_chain_robust(). Recent changes to genpd didn't take that into account, which causes a build error. Let's fix this by converting to the raw_notifier_call_chain_robust() in genpd. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Lina Iyer <ilina@codeaurora.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 16 Oct, 2020 3 commits
-
-
Lina Iyer authored
To enable better debug of PM domains, keep a track of successful and failing attempts to enter each domain idle state. This statistics are exported in debugfs when reading the idle_states node associated with each PM domain. Signed-off-by:
-
Geert Uytterhoeven authored
There is not strict need to group a comment and a single statement in an if block, as comments are stripped by the pre-processor. However, adding curly braces does make the code easier to read, and may avoid mistakes when changing the code later. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
Ulf Hansson authored
A device may have specific HW constraints that must be obeyed to, before its corresponding PM domain (genpd) can be powered off - and vice verse at power on. These constraints can't be managed through the regular runtime PM based deployment for a device, because the access pattern for it, isn't always request based. In other words, using the runtime PM callbacks to deal with the constraints doesn't work for these cases. For these reasons, let's instead add a PM domain power on/off notification mechanism to genpd. To add/remove a notifier for a device, the device must already have been attached to the genpd, which also means that it needs to be a part of the PM domain topology. To add/remove a notifier, let's introduce two genpd specific functions: - dev_pm_genpd_add|remove_notifier() Note that, to further clarify when genpd power on/off notifiers may be used, one can compare with the existing CPU_CLUSTER_PM_ENTER|EXIT notifiers. In the long run, the genpd power on/off notifiers should be able to replace them, but that requires additional genpd based platform support for the current users. Signed-off-by:
-
- 14 Oct, 2020 36 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull PNP updates from Rafael Wysocki: "These clean the PNP code somewhat: - Remove the now unused pnp_find_card() function (Christoph Hellwig) - Drop duplicate pci.h include from the quirks code and add an "internal.h" include to acpi_pnp.c to fix a compiler warning (Tian Tao)" * tag 'pnp-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PNP: remove the now unused pnp_find_card() function PNP: ACPI: Fix missing-prototypes in acpi_pnp.c PNP: quirks: Fix duplicate included pci.h -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "These rework the collection of cpufreq statistics to allow it to take place if fast frequency switching is enabled in the governor, rework the frequency invariance handling in the cpufreq core and drivers, add new hardware support to a couple of cpufreq drivers, fix a number of assorted issues and clean up the code all over. Specifics: - Rework cpufreq statistics collection to allow it to take place when fast frequency switching is enabled in the governor (Viresh Kumar). - Make the cpufreq core set the frequency scale on behalf of the driver and update several cpufreq drivers accordingly (Ionela Voinescu, Valentin Schneider). - Add new hardware support to the STI and qcom cpufreq drivers and improve them (Alain Volmat, Manivannan Sadhasivam). - Fix multiple assorted issues in cpufreq drivers (Jon Hunter, Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan Gerhold, Viresh Kumar). - Fix several assorted issues in the operating performance points (OPP) framework (Stephan Gerhold, Viresh Kumar). - Allow devfreq drivers to fetch devfreq instances by DT enumeration instead of using explicit phandles and modify the devfreq core code to support driver-specific devfreq DT bindings (Leonard Crestez, Chanwoo Choi). - Improve initial hardware resetting in the tegra30 devfreq driver and clean up the tegra cpuidle driver (Dmitry Osipenko). - Update the cpuidle core to collect state entry rejection statistics and expose them via sysfs (Lina Iyer). - Improve the ACPI _CST code handling diagnostics (Chen Yu). - Update the PSCI cpuidle driver to allow the PM domain initialization to occur in the OSI mode as well as in the PC mode (Ulf Hansson). - Rework the generic power domains (genpd) core code to allow domain power off transition to be aborted in the absence of the "power off" domain callback (Ulf Hansson). - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael Wysocki). - Fix the handling of timer_expires in the PM-runtime framework on 32-bit systems and the handling of device links in it (Grygorii Strashko, Xiang Chen). - Add IO requests batching support to the hibernate image saving and reading code and drop a bogus get_gendisk() from there (Xiaoyi Chen, Christoph Hellwig). - Allow PCIe ports to be put into the D3cold power state if they are power-manageable via ACPI (Lukas Wunner). - Add missing header file include to a power capping driver (Pujin Shi). - Clean up the qcom-cpr AVS driver a bit (Liu Shixin). - Kevin Hilman steps down as designated reviwer of adaptive voltage scaling (AVS) drivers (Kevin Hilman)" * tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) cpufreq: stats: Fix string format specifier mismatch arm: disable frequency invariance for CONFIG_BL_SWITCHER cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale() cpufreq: stats: Add memory barrier to store_reset() cpufreq: schedutil: Simplify sugov_fast_switch() ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe() ACPI: EC: PM: Flush EC work unconditionally after wakeup PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI PM: hibernate: remove the bogus call to get_gendisk() in software_resume() cpufreq: Move traces and update to policy->cur to cpufreq core cpufreq: stats: Enable stats for fast-switch as well cpufreq: stats: Mark few conditionals with unlikely() cpufreq: stats: Remove locking cpufreq: stats: Defer stats update to cpufreq_stats_record_transition() PM: domains: Allow to abort power off when no ->power_off() callback PM: domains: Rename power state enums for genpd PM / devfreq: tegra30: Improve initial hardware resetting PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function PM / devfreq: Add devfreq_get_devfreq_by_node function ... -
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Rather calm cycle for x86 platform drivers, all these have been in for-next for a couple of days with no bot complaints. Highlights: - PMC TigerLake fixes and new RocketLake support - various small fixes / updates in other drivers/tools" * tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: MAINTAINERS: update X86 PLATFORM DRIVERS entry with new kernel.org git repo platform/x86: mlx-platform: Add capability field to platform FAN description platform_data/mlxreg: Extend core platform structure platform_data/mlxreg: Update module license platform/x86: mlx-platform: Remove PSU EEPROM configuration MAINTAINERS: Update maintainers for pmc_core driver platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info() platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) support platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and reorganize platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed value platform/x86: intel_pmc_core: Fix TigerLake power gating status map platform/x86: pmc_core: Use descriptive names for LPM registers tools/power/x86/intel-speed-select: Update version for v5.10 tools/power/x86/intel-speed-select: Fix missing base-freq core IDs platform/x86: hp-wmi: add support for thermal policy
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen updates from Juergen Gross: - two small cleanup patches - avoid error messages when initializing MCA banks in a Xen dom0 - a small series for converting the Xen gntdev driver to use pin_user_pages*() instead of get_user_pages*() - intermediate fix for running as a Xen guest on Arm with KPTI enabled (the final solution will need new Xen functionality) * tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Fix typo in xen_pagetable_p2m_free() x86/xen: disable Firmware First mode for correctable memory errors xen/arm: do not setup the runstate info page if kpti is enabled xen: remove redundant initialization of variable ret xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*() xen/gntdev.c: Mark pages as dirty
-
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds authored
Pull Hyper-V updates from Wei Liu: - a series from Boqun Feng to support page size larger than 4K - a few miscellaneous clean-ups * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions x86/hyperv: Remove aliases with X64 in their name PCI: hv: Document missing hv_pci_protocol_negotiation() parameter scsi: storvsc: Support PAGE_SIZE larger than 4K Driver: hv: util: Use VMBUS_RING_SIZE() for ringbuffer sizes HID: hyperv: Use VMBUS_RING_SIZE() for ringbuffer sizes Input: hyperv-keyboard: Use VMBUS_RING_SIZE() for ringbuffer sizes hv_netvsc: Use HV_HYP_PAGE_SIZE for Hyper-V communication hv: hyperv.h: Introduce some hvpfn helper functions Drivers: hv: vmbus: Move virt_to_hvpfn() to hyperv header Drivers: hv: Use HV_HYP_PAGE in hv_synic_enable_regs() Drivers: hv: vmbus: Introduce types of GPADL Drivers: hv: vmbus: Move __vmbus_open() Drivers: hv: vmbus: Always use HV_HYP_PAGE_SIZE for gpadl drivers: hv: remove cast from hyperv_die_event
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SEV-ES support from Borislav Petkov: "SEV-ES enhances the current guest memory encryption support called SEV by also encrypting the guest register state, making the registers inaccessible to the hypervisor by en-/decrypting them on world switches. Thus, it adds additional protection to Linux guests against exfiltration, control flow and rollback attacks. With SEV-ES, the guest is in full control of what registers the hypervisor can access. This is provided by a guest-host exchange mechanism based on a new exception vector called VMM Communication Exception (#VC), a new instruction called VMGEXIT and a shared Guest-Host Communication Block which is a decrypted page shared between the guest and the hypervisor. Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest so in order for that exception mechanism to work, the early x86 init code needed to be made able to handle exceptions, which, in itself, brings a bunch of very nice cleanups and improvements to the early boot code like an early page fault handler, allowing for on-demand building of the identity mapping. With that, !KASLR configurations do not use the EFI page table anymore but switch to a kernel-controlled one. The main part of this series adds the support for that new exchange mechanism. The goal has been to keep this as much as possibly separate from the core x86 code by concentrating the machinery in two SEV-ES-specific files: arch/x86/kernel/sev-es-shared.c arch/x86/kernel/sev-es.c Other interaction with core x86 code has been kept at minimum and behind static keys to minimize the performance impact on !SEV-ES setups. Work by Joerg Roedel and Thomas Lendacky and others" * tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits) x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer x86/sev-es: Check required CPU features for SEV-ES x86/efi: Add GHCB mappings when SEV-ES is active x86/sev-es: Handle NMI State x86/sev-es: Support CPU offline/online x86/head/64: Don't call verify_cpu() on starting APs x86/smpboot: Load TSS and getcpu GDT entry before loading IDT x86/realmode: Setup AP jump table x86/realmode: Add SEV-ES specific trampoline entry point x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES x86/sev-es: Handle #DB Events x86/sev-es: Handle #AC Events x86/sev-es: Handle VMMCALL Events x86/sev-es: Handle MWAIT/MWAITX Events x86/sev-es: Handle MONITOR/MONITORX Events x86/sev-es: Handle INVD Events x86/sev-es: Handle RDPMC Events x86/sev-es: Handle RDTSC(P) Events ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool updates from Ingo Molnar: "Most of the changes are cleanups and reorganization to make the objtool code more arch-agnostic. This is in preparation for non-x86 support. Other changes: - KASAN fixes - Handle unreachable trap after call to noreturn functions better - Ignore unreachable fake jumps - Misc smaller fixes & cleanups" * tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf build: Allow nested externs to enable BUILD_BUG() usage objtool: Allow nested externs to enable BUILD_BUG() objtool: Permit __kasan_check_{read,write} under UACCESS objtool: Ignore unreachable trap after call to noreturn functions objtool: Handle calling non-function symbols in other sections objtool: Ignore unreachable fake jumps objtool: Remove useless tests before save_reg() objtool: Decode unwind hint register depending on architecture objtool: Make unwind hint definitions available to other architectures objtool: Only include valid definitions depending on source file type objtool: Rename frame.h -> objtool.h objtool: Refactor jump table code to support other architectures objtool: Make relocation in alternative handling arch dependent objtool: Abstract alternative special case handling objtool: Move macros describing structures to arch-dependent code objtool: Make sync-check consider the target architecture objtool: Group headers to check in a single list objtool: Define 'struct orc_entry' only when needed objtool: Skip ORC entry creation for non-text sections objtool: Move ORC logic out of check() ...
-
Linus Torvalds authored
Merge misc updates from Andrew Morton: "181 patches. Subsystems affected by this patch series: kbuild, scripts, ntfs, ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise, gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma, memory-failure, vmallo and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits) mm/migrate: remove obsolete comment about device public mm/migrate: remove cpages-- in migrate_vma_finalize() mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary memblock: use separate iterators for memory and reserved regions memblock: implement for_each_reserved_mem_region() using __next_mem_region() memblock: remove unused memblock_mem_size() x86/setup: simplify reserve_crashkernel() x86/setup: simplify initrd relocation and reservation arch, drivers: replace for_each_membock() with for_each_mem_range() arch, mm: replace for_each_memblock() with for_each_mem_pfn_range() memblock: reduce number of parameters in for_each_mem_range() memblock: make memblock_debug and related functionality private memblock: make for_each_memblock_type() iterator private mircoblaze: drop unneeded NUMA and sparsemem initializations riscv: drop unneeded node initialization h8300, nds32, openrisc: simplify detection of memory extents arm64: numa: simplify dummy_numa_init() arm, xtensa: simplify initialization of high memory pages dma-contiguous: simplify cma_early_percent_memory() KVM: PPC: Book3S HV: simplify kvm_cma_reserve() ...
-
Ralph Campbell authored
Device public memory never had an in tree consumer and was removed in commit 25b2995a ("mm: remove MEMORY_DEVICE_PUBLIC support"). Delete the obsolete comment. Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20200827190735.12752-2-rcampbell@nvidia.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ralph Campbell authored
The variable struct migrate_vma->cpages is only used in migrate_vma_setup(). There is no need to decrement it in migrate_vma_finalize() since it is never checked. Signed-off-by:
-
Suren Baghdasaryan authored
Currently __set_oom_adj loops through all processes in the system to keep oom_score_adj and oom_score_adj_min in sync between processes sharing their mm. This is done for any task with more that one mm_users, which includes processes with multiple threads (sharing mm and signals). However for such processes the loop is unnecessary because their signal structure is shared as well. Android updates oom_score_adj whenever a tasks changes its role (background/foreground/...) or binds to/unbinds from a service, making it more/less important. Such operation can happen frequently. We noticed that updates to oom_score_adj became more expensive and after further investigation found out that the patch mentioned in "Fixes" introduced a regression. Using Pixel 4 with a typical Android workload, write time to oom_score_adj increased from ~3.57us to ~362us. Moreover this regression linearly depends on the number of multi-threaded processes running on the system. Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj update should be synchronized between multiple processes. To prevent races between clone() and __set_oom_adj(), when oom_score_adj of the process being cloned might be modified from userspace, we use oom_adj_mutex. Its scope is changed to global. The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for the case of vfork(). To prevent performance regressions of vfork(), we skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is specified. Clearing the MMF_MULTIPROCESS flag (when the last process sharing the mm exits) is left out of this patch to keep it simple and because it is believed that this threading model is rare. Should there ever be a need for optimizing that case as well, it can be done by hooking into the exit path, likely following the mm_update_next_owner pattern. With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being quite rare, the regression is gone after the change is applied. [surenb@google.com: v3] Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com Fixes: 44a70ade ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") Reported-by:
Tim Murray <timmurray@google.com> Suggested-by:
Michal Hocko <mhocko@kernel.org> Signed-off-by:
Suren Baghdasaryan <surenb@google.com> Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Christian Kellner <christian@kellner.me> Cc: Adrian Reber <areber@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: John Johansen <john.johansen@canonical.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.comDebugged-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Mike Rapoport authored
for_each_memblock() is used to iterate over memblock.memory in a few places that use data from memblock_region rather than the memory ranges. Introduce separate for_each_mem_region() and for_each_reserved_mem_region() to improve encapsulation of memblock internals from its users. Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
Baoquan He <bhe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> [x86] Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS] Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
Iteration over memblock.reserved with for_each_reserved_mem_region() used __next_reserved_mem_region() that implemented a subset of __next_mem_region(). Use __for_each_mem_range() and, essentially, __next_mem_region() with appropriate parameters to reduce code duplication. While on it, rename for_each_reserved_mem_region() to for_each_reserved_mem_range() for consistency. Signed-off-by:
-
Mike Rapoport authored
The only user of memblock_mem_size() was x86 setup code, it is gone now and memblock_mem_size() funciton can be removed. Signed-off-by:
-
Mike Rapoport authored
* Replace magic numbers with defines * Replace memblock_find_in_range() + memblock_reserve() with memblock_phys_alloc_range() * Stop checking for low memory size in reserve_crashkernel_low(). The allocation from limited range will anyway fail if there is no enough memory, so there is no need for extra traversal of memblock.memory Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-15-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
Currently, initrd image is reserved very early during setup and then it might be relocated and re-reserved after the initial physical memory mapping is created. The "late" reservation of memblock verifies that mapped memory size exceeds the size of initrd, then checks whether the relocation required and, if yes, relocates inirtd to a new memory allocated from memblock and frees the old location. The check for memory size is excessive as memblock allocation will anyway fail if there is not enough memory. Besides, there is no point to allocate memory from memblock using memblock_find_in_range() + memblock_reserve() when there exists memblock_phys_alloc_range() with required functionality. Remove the redundant check and simplify memblock allocation. Signed-off-by:
-
Mike Rapoport authored
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.comSigned-off-by: -
Mike Rapoport authored
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start_pfn = memblock_region_memory_base_pfn(reg); end_pfn = memblock_region_memory_end_pfn(reg); /* do something with start_pfn and end_pfn */ } Rather than iterate over all memblock.memory regions and each time query for their start and end PFNs, use for_each_mem_pfn_range() iterator to get simpler and clearer code. Signed-off-by: -
Mike Rapoport authored
Currently for_each_mem_range() and for_each_mem_range_rev() iterators are the most generic way to traverse memblock regions. As such, they have 8 parameters and they are hardly convenient to users. Most users choose to utilize one of their wrappers and the only user that actually needs most of the parameters is memblock itself. To avoid yet another naming for memblock iterators, rename the existing for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new for_each_mem_range[_rev]() wrappers with only index, start and end parameters. The new wrapper nicely fits into init_unavailable_mem() and will be used in upcoming changes to simplify memblock traversals. Signed-off-by:
-
Mike Rapoport authored
The only user of memblock_dbg() outside memblock was s390 setup code and it is converted to use pr_debug() instead. This allows to stop exposing memblock_debug and memblock_dbg() to the rest of the kernel. [akpm@linux-foundation.org: make memblock_dbg() safer and neater] Signed-off-by:
-
Mike Rapoport authored
for_each_memblock_type() is not used outside mm/memblock.c, move it there from include/linux/memblock.h Signed-off-by:
-
Mike Rapoport authored
microblaze does not support neither NUMA not SPARSMEM, so there is no point to call memblock_set_node() and sparse_memory_present_with_active_regions() functions during microblaze memory initialization. Remove these calls and the surrounding code. Signed-off-by:
-
Mike Rapoport authored
RISC-V does not (yet) support NUMA and for UMA architectures node 0 is used implicitly during early memory initialization. There is no need to call memblock_set_node(), remove this call and the surrounding code. Signed-off-by:
-
Mike Rapoport authored
Instead of traversing memblock.memory regions to find memory_start and memory_end, simply query memblock_{start,end}_of_DRAM(). Signed-off-by:Stafford Horne <shorne@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-6-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
dummy_numa_init() loops over memblock.memory and passes nid=0 to numa_add_memblk() which essentially wraps memblock_set_node(). However, memblock_set_node() can cope with entire memory span itself, so the loop over memblock.memory regions is redundant. Using a single call to memblock_set_node() rather than a loop also fixes an issue with a buggy ACPI firmware in which the SRAT table covers some but not all of the memory in the EFI memory map. Jonathan Cameron says: This issue can be easily triggered by having an SRAT table which fails to cover all elements of the EFI memory map. This firmware error is detected and a warning printed. e.g. "NUMA: Warning: invalid memblk node 64 [mem 0x240000000-0x27fffffff]" At that point we fall back to dummy_numa_init(). However, the failed ACPI init has left us with our memblocks all broken up as we split them when trying to assign them to NUMA nodes. We then iterate over the memblocks and add them to node 0. numa_add_memblk() calls memblock_set_node() which merges regions that were previously split up during the earlier attempt to add them to different nodes during parsing of SRAT. This means elements are moved in the memblock array and we can end up in a different memblock after the call to numa_add_memblk(). Result is: Unable to handle kernel paging request at virtual address 0000000000003a40 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000003a40] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP ... Call trace: sparse_init_nid+0x5c/0x2b0 sparse_init+0x138/0x170 bootmem_init+0x80/0xe0 setup_arch+0x2a0/0x5fc start_kernel+0x8c/0x648 Replace the loop with a single call to memblock_set_node() to the entire memory. Signed-off-by:Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-5-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
free_highpages() in both arm and xtensa essentially open-code for_each_free_mem_range() loop to detect high memory pages that were not reserved and that should be initialized and passed to the buddy allocator. Replace open-coded implementation of for_each_free_mem_range() with usage of memblock API to simplify the code. Signed-off-by:
-
Mike Rapoport authored
The memory size calculation in cma_early_percent_memory() traverses memblock.memory rather than simply call memblock_phys_mem_size(). The comment in that function suggests that at some point there should have been call to memblock_analyze() before memblock_phys_mem_size() could be used. As of now, there is no memblock_analyze() at all and memblock_phys_mem_size() can be used as soon as cold-plug memory is registered with memblock. Replace loop over memblock.memory with a call to memblock_phys_mem_size(). Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Mike Rapoport authored
Patch series "memblock: seasonal cleaning^w cleanup", v3. These patches simplify several uses of memblock iterators and hide some of the memblock implementation details from the rest of the system. This patch (of 17): The memory size calculation in kvm_cma_reserve() traverses memblock.memory rather than simply call memblock_phys_mem_size(). The comment in that function suggests that at some point there should have been call to memblock_analyze() before memblock_phys_mem_size() could be used. As of now, there is no memblock_analyze() at all and memblock_phys_mem_size() can be used as soon as cold-plug memory is registered with memblock. Replace loop over memblock.memory with a call to memblock_phys_mem_size(). Signed-off-by:
-
Miaohe Lin authored
Add else to split mutually exclusive case and avoid some unnecessary check. It doesn't seem to change code generation (compiler is smart), but I think it helps readability. [akpm@linux-foundation.org: fix comment location] Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Wei Yang authored
No one use this macro anymore. Also fix code style of policy_node(). Signed-off-by:
Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by:
-
Wei Yang authored
It is not necessary to hold the lock of current when setting nodemask of a new policy. Signed-off-by:
-
John Hubbard authored
This patch reduces the running time for compaction_test from about 27 sec, to 3.3 sec, which is about an 8x speedup. These numbers are for an Intel x86_64 system with 32 GB of DRAM. The compaction_test.c program was spending most of its time doing mmap(), 1 MB at a time, on about 25 GB of memory. Instead, do the mmaps 100 MB at a time. (Going past 100 MB doesn't make things go much faster, because other parts of the program are using the remaining time.) Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
Sri Jayaramappa <sjayaram@akamai.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Link: https://lkml.kernel.org/r/20201002080621.551044-2-jhubbard@nvidia.comSigned-off-by:
-
Mateusz Nosek authored
The enum value 'COMPACT_INACTIVE' is never used so can be removed. Signed-off-by:
Mateusz Nosek <mateusznosek0@gmail.com> Signed-off-by:
-
Mateusz Nosek authored
The same code can work both for 'zone->compact_considered > defer_limit' and 'zone->compact_considered >= defer_limit'. In the latter there is one branch less which is more effective considering performance. Signed-off-by:
-
Xiang Chen authored
zhdr is already initialized in the front of the function, so remove redundant initialization here. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Link: https://lkml.kernel.org/r/1600419885-191907-1-git-send-email-chenxiang66@hisilicon.comSigned-off-by:
-
