- 29 Jun, 2011 5 commits
-
-
Tony Lindgren authored
-
Jarkko Nikula authored
We haven't seen either use for in-driver transfer API in McBSP driver over the years so it looks they can be removed too. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Jarkko Nikula authored
We haven't seen any use for the SPI API in McBSP driver over the years. More over, Peter Ujfalusi <peter.ujfalusi@ti.com> noticed that SPI mode is not even supported since OMAP2430 so it's very unlikely that we'll see any use for it in the future either. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
Fix compilation error introduced with 786b01a8 (cleanup regulator supply definitions in mach-omap2). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Grazvydas Ignotas authored
omap_nand_platform_data fields 'options', 'gpio_irq', 'nand_setup' and 'dma_channel' are never referenced by the NAND driver, yet various board files are initializing those fields. This is both incorrect and confusing, so remove them. This allows to get rid of a global variable in gpmc-nand.c. This also corrects an issue where some boards are trying to pass NAND 16bit flag through .options, but the driver is using .devsize instead and ignoring .options. Finally, .dev_ready is treated as a flag by the driver, so make it bool instead of a function pointer. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 27 Jun, 2011 4 commits
-
-
Tony Lindgren authored
We can keep everything sys_timer and gptimer.c related code in timer.c as the code will be very minimal. Later on we can also remove timer-mpu.c, as it can be called from omap4_timer_init function. This allows us to get rid of confusing existing files. We currently have timer-gp.c, timer-mpu.c, and patches have been posted to add dmtimer.c. There's no need to have these multiple files, we can put everything into timer.c. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
This is no longer needed as we now just set the desired .timer in MACHINE_START. We can now also remove timer-gp.h. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
-
Tony Lindgren authored
Use dmtimer macros for clocksource. As with the clockevent, this allows us to initialize the rest of dmtimer code later on. Note that eventually we will be initializing the timesource from init_early so sched_clock will work properly for CONFIG_PRINTK_TIME. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
-
Tony Lindgren authored
There's no need to initialize the dmtimer framework early. Just mark the clocksource and timesource as reserved, and initialize dmtimer with an arch_initcall. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
-
- 20 Jun, 2011 5 commits
-
-
Tony Lindgren authored
This removes the support for setting the wake-up timer for debugging. Later on we can reserve gptimer1 for PM code only and have similar functionality. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
-
Tony Lindgren authored
This patch makes timer-gp.c to use only a subset of dmtimer functions without the need to initialize dmtimer code early. Also note that now with the inline functions, timer_set_next_event becomes more efficient in the lines of assembly code. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
-
Tony Lindgren authored
This will allow us to share the code between system timer and dmtimer device driver code without having to initialize all the dmtimers early. This change will also make the timer_set_next_event more efficient as the inline functions will optimize the code better for the timer reprogramming. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
-
Tony Lindgren authored
These will be needed when dmtimer platform init code gets split for omap1 and omap2+. These will also be needed for separate sys_timer init and driver init for the rest of the hardware timers in the following patches. No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
-
Tony Lindgren authored
This is needed for the following patches so we can initialize the rest of the hardware timers later on. As with the init_irq calls, there's no need to do cpu_is_omap calls during the timer init as we only care about the major omap generation. This means that we can initialize the sys_timer with the .timer entries alone. Note that for now we just set stubs for the various sys_timer entries that will get populated in a later patch. The following patches will also remove the omap_dm_timer_init calls and change the init for the rest of the hardware timers to happen with an arch_initcall. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
-
- 16 Jun, 2011 1 commit
-
-
Tony Lindgren authored
This allows us to remove cpu_is_omap calls from init_irq functions. There should not be any need for cpu_is_omap calls as at this point. During the timer init we only care about SoC generation, and not about subrevisions. The main reason for the patch is that we want to initialize only minimal omap specific code from the init_early call. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
-
- 14 Jun, 2011 2 commits
-
-
Oleg Drokin authored
CC: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: Mike Rapoport <mike@compulab.co.il> CC: Nishant Kamat <nskamat@ti.com> CC: Steve Sakoman <steve@sakoman.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Oleg Drokin authored
to use REGULATOR_SUPPLY arrays. CC: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: Mike Rapoport <mike@compulab.co.il> CC: Nishant Kamat <nskamat@ti.com> CC: Steve Sakoman <steve@sakoman.com> CC: Felipe Balbi <balbi@ti.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: peter.barada@logicpd.com Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 13 Jun, 2011 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: SLAB: Record actual last user of freed objects. slub: always align cpu_slab to honor cmpxchg_double requirement
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: unwind canceled flock state ceph: fix ENOENT logic in striped_read ceph: fix short sync reads from the OSD ceph: fix sync vs canceled write ceph: use ihold when we already have an inode ref
-
Linus Torvalds authored
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rtc: Staticize non-exported __rtc_set_alarm() rtc: Fix ioctl error path return ptp: Fix some locking bugs in ptp_read() ptp: Return -EFAULT on copy_to_user() errors
-
Linus Torvalds authored
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ftrace: Revert 8ab2b7ef ftrace: Remove unnecessary disabling of irqs kprobes/trace: Fix kprobe selftest for gcc 4.6 ftrace: Fix possible undefined return code oprofile, dcookies: Fix possible circular locking dependency oprofile: Fix locking dependency in sync_start() oprofile: Free potentially owned tasks in case of errors oprofile, x86: Add comments to IBS LVT offset initialization
-
Linus Torvalds authored
Merge branches 'x86-urgent-for-linus' and 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: devicetree: Add missing early_init_dt_setup_initrd_arch stub x86: cpu-hotplug: Prevent softirq wakeup on wrong CPU * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Prevent potential NULL dereference in irq_set_irq_wake()
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi-pl022: Add missing return value update
-
Linus Torvalds authored
Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C2410: remove the now empty mach-s3c2410/irq.c ARM: S3C24XX: Move s3c24xx_irq_syscore_ops to plat-s3c24xx/irq.c ARM: S3C24xx: Fix missing struct for s3c2410_dma_chan ARM: SAMSUNG: Remove unused onenand plat functions ARM: EXYNOS4: Remove compiler warning on exynos4_pwm4_resume ARM: S5P: Fix compilation error for exynos4_defconfig ARM: S5P: Should be S3C_VA_USB_HSPHY instead of S5P_VA_XX ARM: S5P64X0: Fix SPI platform device name ARM: S5PV210: Fix possible null pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix problem in setting checkpoint interval nilfs2: fix missing block address termination in btree node shrinking nilfs2: fix incorrect block address termination in node concatenation
-
Virupax Sadashivpetimath authored
Return error on out of range cpsdvsr value. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
- 12 Jun, 2011 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: use join_transaction in btrfs_evict_inode() Btrfs - use %pU to print fsid Btrfs: fix extent state leak on failed nodatasum reads btrfs: fix unlocked access of delalloc_inodes Btrfs: avoid stack bloat in btrfs_ioctl_fs_info() btrfs: remove 64bit alignment padding to allow extent_buffer to fit into one fewer cacheline Btrfs: clear current->journal_info on async transaction commit Btrfs: make sure to recheck for bitmaps in clusters btrfs: remove unneeded includes from scrub.c btrfs: reinitialize scrub workers btrfs: scrub: errors in tree enumeration Btrfs: don't map extent buffer if path->skip_locking is set Btrfs: unlock the trans lock properly Btrfs: don't map extent buffer if path->skip_locking is set Btrfs: fix duplicate checking logic Btrfs: fix the allocator loop logic Btrfs: fix bitmap regression Btrfs: don't commit the transaction if we dont have enough pinned bytes Btrfs: noinline the cluster searching functions Btrfs: cache bitmaps when searching for a cluster
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda: Fix inaudible internal speakers on CyberpowerPC Gamer Xplorer N57001 laptop ALSA: Use %pV for snd_printk() ALSA: hda - Fix initialization of hp pins with master_mute in Realtek ALSA: hda - Fix invalid unsol tag for some alc262 model quirks ASoC: SAMSUNG: Fix the incorrect referencing of I2SCON register ASoC: snd_soc_new_{mixer,mux,pga} make sure to use right DAPM context ASoC: fsl: fix initialization of DMA buffers ASoC: WM8804 does not support sample rates below 32kHz ASoC: Fix WM8962 headphone volume update for use of advanced caches ASoC: Blackfin: bf5xx-ad1836: Fix codec device name ALSA: hda: Fix quirk for Dell Inspiron 910 ASoC: AD1836: Fix setting the PCM format ASoC: Check for NULL register bank in snd_soc_get_cache_val() ASoC: Add missing break in WM8915 FLL source selection ASoC: Only update SYSCLK_ENA when pausing WM8915 SYSCLK ASoC: atmel_ssc: Don't try to free ssc if request failed
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide-cd: signedness warning fix again
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio/basic_mmio: add missing include of spinlock_types.h gpio/nomadik: fix sleepmode for elder Nomadik
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (55 commits) ISDN, hfcsusb: Don't leak in hfcsusb_ph_info() netpoll: call dev_put() on error in netpoll_setup() net: ep93xx_eth: fix DMA API violations net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent() net: ep93xx_eth: allocate buffers using kmalloc() net: ep93xx_eth: pass struct device to DMA API functions ep93xx: set DMA masks for the ep93xx_eth vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check dl2k: EEPROM CRC calculation wrong endianess on bigendian machine NET: am79c961: fix assembler warnings NET: am79c961: ensure multicast filter is correctly set at open NET: am79c961: ensure asm() statements are marked volatile ethtool.h: fix typos ep93xx_eth: Update MAINTAINERS ipv4: Fix packet size calculation for raw IPsec packets in __ip_append_data netpoll: prevent netpoll setup on slave devices net: pmtu_expires fixes gianfar:localized filer table iwlegacy: fix channel switch locking mac80211: fix IBSS teardown race ...
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: AppArmor: Fix sleep in invalid context from task_setrlimit
-
Jesper Juhl authored
We leak the memory allocated to 'phi' when the variable goes out of scope in hfcsusb_ph_info(). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There is a dev_put(ndev) missing on an error path. This was introduced in 0c1ad04a "netpoll: prevent netpoll setup on slave devices". Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Jun, 2011 5 commits
-
-
Mika Westerberg authored
Russell King said: > > So, to summarize what its doing: > > 1. It allocates buffers for rx and tx. > 2. It maps them with dma_map_single(). > This transfers ownership of the buffer to the DMA device. > 3. In ep93xx_xmit, > 3a. It copies the data into the buffer with skb_copy_and_csum_dev() > This violates the DMA buffer ownership rules - the CPU should > not be writing to this buffer while it is (in principle) owned > by the DMA device. > 3b. It then calls dma_sync_single_for_cpu() for the buffer. > This transfers ownership of the buffer to the CPU, which surely > is the wrong direction. > 4. In ep93xx_rx, > 4a. It calls dma_sync_single_for_cpu() for the buffer. > This at least transfers the DMA buffer ownership to the CPU > before the CPU reads the buffer > 4b. It then uses skb_copy_to_linear_data() to copy the data out. > At no point does it transfer ownership back to the DMA device. > 5. When the driver is removed, it dma_unmap_single()'s the buffer. > This transfers ownership of the buffer to the CPU. > 6. It frees the buffer. > > While it may work on ep93xx, it's not respecting the DMA API rules, > and with DMA debugging enabled it will probably encounter quite a few > warnings. This patch fixes these violations. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Petr Stetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
Commit a197b59a (mm: fail GFP_DMA allocations when ZONE_DMA is not configured) made page allocator to return NULL if GFP_DMA is set but CONFIG_ZONE_DMA is disabled. This causes ep93xx_eth to fail: WARNING: at mm/page_alloc.c:2251 __alloc_pages_nodemask+0x11c/0x638() Modules linked in: [<c0035498>] (unwind_backtrace+0x0/0xf4) from [<c0043da4>] (warn_slowpath_common+0x48/0x60) [<c0043da4>] (warn_slowpath_common+0x48/0x60) from [<c0043dd8>] (warn_slowpath_null+0x1c/0x24) [<c0043dd8>] (warn_slowpath_null+0x1c/0x24) from [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638) [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638) from [<c00366fc>] (__dma_alloc+0x8c/0x3ec) [<c00366fc>] (__dma_alloc+0x8c/0x3ec) from [<c0036adc>] (dma_alloc_coherent+0x54/0x60) [<c0036adc>] (dma_alloc_coherent+0x54/0x60) from [<c0227808>] (ep93xx_open+0x20/0x864) [<c0227808>] (ep93xx_open+0x20/0x864) from [<c0283144>] (__dev_open+0xb8/0x108) [<c0283144>] (__dev_open+0xb8/0x108) from [<c0280528>] (__dev_change_flags+0x70/0x128) [<c0280528>] (__dev_change_flags+0x70/0x128) from [<c0283054>] (dev_change_flags+0x10/0x48) [<c0283054>] (dev_change_flags+0x10/0x48) from [<c001a720>] (ip_auto_config+0x190/0xf68) [<c001a720>] (ip_auto_config+0x190/0xf68) from [<c00233b0>] (do_one_initcall+0x34/0x18c) [<c00233b0>] (do_one_initcall+0x34/0x18c) from [<c0008400>] (kernel_init+0x94/0x134) [<c0008400>] (kernel_init+0x94/0x134) from [<c0030858>] (kernel_thread_exit+0x0/0x8) Since there is no restrictions for DMA on ep93xx, we can fix this by just removing the GFP_DMA flag from the call. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Petr Stetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
We can use simply kmalloc() to allocate the buffers. This also simplifies the code and allows us to perform DMA sync operations more easily. Memory is allocated with only GFP_KERNEL since there are no DMA allocation restrictions on this platform. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Petr Stetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
We shouldn't use NULL for any DMA API functions, unless we are dealing with ISA or EISA device. So pass correct struct dev pointer to these functions. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
Since the driver uses the DMA API, we should pass it valid DMA masks. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Petr Stetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-