Commit bf5e758f ("genirq/msi: Simplify sysfs handling") reworked the
creation of sysfs entries for MSI IRQs. The creation used to be in
msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs.
Then it moved into __msi_domain_alloc_irqs which is an implementation of
domain_alloc_irqs. However, Xen comes with the only other implementation
of domain_alloc_irqs and hence doesn't run the sysfs population code
anymore.

Commit 6c796996 ("x86/pci/xen: Fixup fallout from the PCI/MSI
overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info
but that doesn't actually have an effect because Xen uses it's own
domain_alloc_irqs implementation.

Fix this by making use of the fallback functions for sysfs population.

Fixes: bf5e758f ("genirq/msi: Simplify sysfs handling")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.deSigned-off-by: Juergen Gross <jgross@suse.com>

In the pvcalls_new_active_socket() function, most error paths call
pvcalls_back_release_active(fedata->dev, fedata, map) which calls
sock_release() on "sock".  The bug is that the caller also frees sock.

Fix this by making every error path in pvcalls_new_active_socket()
release the sock, and don't free it in the caller.

Fixes: 5db4d286 ("xen/pvcalls: implement connect command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/e5f98dc2-0305-491f-a860-71bbd1398a2f@kili.mountainSigned-off-by: Juergen Gross <jgross@suse.com>

The existing code silently converts read operations with the
REQ_FUA bit set into write-barrier operations. This results in data
loss as the backend scribbles zeroes over the data instead of returning
it.

While the REQ_FUA bit doesn't make sense on a read operation, at least
one well-known out-of-tree kernel module does set it and since it
results in data loss, let's be safe here and only look at REQ_FUA for
writes.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.comSigned-off-by: Juergen Gross <jgross@suse.com>

There is no need to have the functions blkif_get_x86_32_req() and
blkif_get_x86_64_req() in a header file, as they are used in one place
only.

So move them into the using source file and drop the inline qualifier.

While at it fix some style issues, and simplify the code by variable
reusing and using min() instead of open coding it.

Instead of using barrier() use READ_ONCE() for avoiding multiple reads
of nr_segments.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

The interface of free_persistent_gnts() can be simplified, as there is
only a single caller of free_persistent_gnts() and the 2nd and 3rd
parameters are easily obtainable via the ring pointer, which is passed
as the first parameter anyway.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

There is no function xen_blkif_purge_persistent(), so remove its
prototype from common.h.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

bind_evtchn_to_irqhandler() shouldn't be called under spinlock, as it
can sleep.

This requires to move the calls of create_active() out of the locked
regions. This is no problem, as the worst which could happen would be
a spurious call of the interrupt handler, causing a spurious wake_up().
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/lkml/Y+JUIl64UDmdkboh@kadam/Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20230403092711.15285-1-jgross@suse.comSigned-off-by: Juergen Gross <jgross@suse.com>

scsiback_free_translation_entry() shouldn't be called under spinlock,
as it can sleep.

This requires to split removing a translation entry from the v2p list
from actually calling kref_put() for the entry.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/lkml/Y+JUIl64UDmdkboh@kadam/Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20230328084602.20729-1-jgross@suse.comSigned-off-by: Juergen Gross <jgross@suse.com>

pcistub_device_put() shouldn't be called under spinlock, as it can
sleep.

For this reason pcistub_device_get_pci_dev() needs to be modified:
instead of always calling pcistub_device_get() just do the call of
pcistub_device_get() only if it is really needed. This removes the
need to call pcistub_device_put().
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/lkml/Y+JUIl64UDmdkboh@kadam/Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20230328084549.20695-1-jgross@suse.comSigned-off-by: Juergen Gross <jgross@suse.com>

We started disabling '-Warray-bounds' for gcc-12 originally on s390,
because it resulted in some warnings that weren't realistically fixable
(commit 8b202ee2: "s390: disable -Warray-bounds").

That s390-specific issue was then found to be less common elsewhere, but
generic (see f0be87c4: "gcc-12: disable '-Warray-bounds' universally
for now"), and then later expanded the version check was expanded to
gcc-11 (5a41237a: "gcc: disable -Warray-bounds for gcc-11 too").

And it turns out that I was much too optimistic in thinking that it's
all going to go away, and here we are with gcc-13 showing all the same
issues.  So instead of expanding this one version at a time, let's just
disable it for gcc-11+, and put an end limit to it only when we actually
find a solution.

Yes, I'm sure some of this is because the kernel just does odd things
(like our "container_of()" use, but also knowingly playing games with
things like linker tables and array layouts).

And yes, some of the warnings are likely signs of real bugs, but when
there are hundreds of false positives, that doesn't really help.

Oh well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the prefix in the kernel source tarball

 - Fix a typo in the copyright file in Debian package

* tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: use proper prefix for tarballs to fix rpm-pkg build error
  kbuild: deb-pkg: Fix a spell typo in mkdebian script

Pull irq fix from Borislav Petkov:

 - Remove an over-zealous sanity check of the array of MSI-X vectors to
   be allocated for a device

* tag 'irq_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Remove over-zealous hardware size check in pci_msix_validate_entries()

Pull x86 fix from Borislav Petkov

 - Fix for older binutils which do not support C-syntax constant
   suffixes

* tag 'x86_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Do not use integer constant suffixes in inline asm

Pull input fixes from Dmitry Torokhov:

 - a check in pegasus-notetaker driver to validate the type of pipe when
   probing a new device

 - a fix for Cypress touch controller to correctly parse maximum number
   of touches.

* tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cyttsp5 - fix sensing configuration data structure
  Input: pegasus-notetaker - check pipe type when probing

Since commit f8d94c4e ("kbuild: do not create intermediate *.tar
for source tarballs"), 'make rpm-pkg' fails because the prefix of the
source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@)
strips only '.gz' from the filename linux.tar.gz.

You need to strip two suffixes from compressed tarballs and one suffix
from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by
'make perf-tar-src-pkg').

One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/
but I think it is better to hard-code the prefix.

Fixes: f8d94c4e ("kbuild: do not create intermediate *.tar for source tarballs")
Reported-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Signed-off-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull MIPS fix from Thomas Bogendoerfer:
 "Fix for link errors"

* tag 'mips-fixes_6.3_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Define RUNTIME_DISCARD_EXIT in LD script

Pull kvm fixes from Paolo Bonzini:
 "Two serious ARM fixes:

   - Plug a buffer overflow due to the use of the user-provided register
     width for firmware regs. Outright reject accesses where the user
     register width does not match the kernel representation.

   - Protect non-atomic RMW operations on vCPU flags against preemption,
     as an update to the flags by an intervening preemption could be
     lost"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()
  KVM: arm64: Make vcpu flag updates non-preemptible

Pull cifs fixes from Steve French:
 "Three small smb3 client fixes:

   - two important fixes for unbuffered read regression with the
     iov_iter changes (e.g. read soon after mount in some multichannel
     scenarios)

   - DFS prefix path fix (also for stable)"

* tag '6.3-rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Reapply lost fix from commit 30b2b219
  cifs: Fix unbuffered read
  cifs: avoid dup prefix path in dfs_get_automount_devname()

Merge tag 'kvmarm-fixes-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.3, part #4

 - Plug a buffer overflow due to the use of the user-provided register
   width for firmware regs. Outright reject accesses where the
   user register width does not match the kernel representation.

 - Protect non-atomic RMW operations on vCPU flags against preemption,
   as an update to the flags by an intervening preemption could be lost.

MIPS's exit sections are discarded at runtime as well.

Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o

Fixes: 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This reverts commit 5c62d5aa.

This broke wake-on-lan for multiple people, and for much too long.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217069
Link: https://lore.kernel.org/all/754225a2-95a9-2c36-1886-7da1a78308c2@loongson.cn/
Link: https://github.com/acpica/acpica/pull/866
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jianmin Lv <lvjianmin@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Bob Moore <robert.moore@intel.com>
Cc: stable@kernel.org # 6.2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull btrfs fixes from David Sterba:
 "Two patches fixing the problem with aync discard.

  The default settings had a low IOPS limit and processing a large batch
  to discard would take a long time. On laptops this can cause increased
  power consumption due to disk activity.

  As async discard has been on by default since 6.2 this likely affects
  a lot of users.

  Summary:

   - increase the default IOPS limit 10x which reportedly helped

   - setting the sysfs IOPS value to 0 now does not throttle anymore
     allowing the discards to be processed at full speed. Previously
     there was an arbitrary 6 hour target for processing the pending
     batch"

* tag 'for-6.3-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: reinterpret async discard iops_limit=0 as no delay
  btrfs: set default discard iops_limit to 1000

Pull block fix from Jens Axboe:
 "Just a single revert of a patch from the 6.3 series"

* tag 'block-6.3-2023-04-21' of git://git.kernel.dk/linux:
  Revert "block: Merge bio before checking ->cached_rq"

Pull char/misc driver fixes from Greg KH:
 "Here are some last-minute tiny driver fixes for 6.3-final. They
  include fixes for some fpga and iio drivers:

   - fpga bridge driver fix

   - fpga dfl error reporting fix

   - fpga m10bmc driver fix

   - fpga xilinx driver fix

   - iio light driver fix

   - iio dac fwhandle leak fix

   - iio adc driver fix

  All of these have been in linux-next for a few weeks with no reported
  problems"

* tag 'char-misc-6.3-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  iio: light: tsl2772: fix reading proximity-diodes from device tree
  fpga: bridge: properly initialize bridge device before populating children
  iio: dac: ad5755: Add missing fwnode_handle_put()
  iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()
  fpga: xilinx-pr-decoupler: Use readl wrapper instead of pure readl
  fpga: dfl-pci: Drop redundant pci_enable_pcie_error_reporting()
  fpga: m10bmc-sec: Fix rsu_send_data() to return FW_UPLOAD_ERR_HW_ERROR

Pull gpio fixes from Bartosz Golaszewski:

 - use raw_spinlocks in regmaps that are used in interrupt context in
   gpio-104-idi-48 and gpio-104-dio-48e

* tag 'gpio-fixes-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: 104-idi-48: Enable use_raw_spinlock for idi48_regmap_config
  gpio: 104-dio-48e: Enable use_raw_spinlock for dio48e_regmap_config

Pull sound fixes from Takashi Iwai:
 "Just a few fixes: all small and device-specific (ASoC FSL, SOF, and
  HD-audio quirks), should be safe to apply at the last minute"

* tag 'sound-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
  ASoC: fsl_asrc_dma: fix potential null-ptr-deref
  ASoC: fsl_sai: Fix pins setting for i.MX8QM platform
  ALSA: hda/realtek: Remove specific patch for Dell Precision 3260
  ASoC: max98373: change power down sequence for smart amp
  ASoC: SOF: pm: Tear down pipelines only if DSP was active
  ASoC: SOF: ipc4-topology: Clarify bind failure caused by missing fw_module

It seems there is a misprint in the check of strdup() return code that
can lead to NULL pointer dereference.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4520c6a4 ("X.509: Add simple ASN.1 grammar compiler")
Signed-off-by: Ekaterina Orlova <vorobushek.ok@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Link: https://lore.kernel.org/r/20230315172130.140-1-vorobushek.ok@gmail.com/Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "This is the regular and hopefully last round of fixes for 6.3.

  Pretty small, a few amdgpu, one i915, one nouveau, one rockchip and
  one gpu scheduler fix:

  nouveau:
   - fix dma-resv timeout

  rockchip:
   - fix suspend/resume

  sched:
   - fix timeout handling

  i915:
   - Fix fast wake AUX sync len

  amdgpu:
   - GPU reset fix
   - DCN 3.1.5 line buffer fix
   - Display fix for single channel memory configs
   - Fix a possible divide by 0"

* tag 'drm-fixes-2023-04-21' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: fix a divided-by-zero error
  drm/amd/display: limit timing for single dimm memory
  drm/amd/display: set dcn315 lb bpp to 48
  drm/amdgpu: Fix desktop freezed after gpu-reset
  drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume
  drm/nouveau: fix incorrect conversion to dma_resv_wait_timeout()
  drm/rockchip: vop2: fix suspend/resume
  drm/i915: Fix fast wake AUX sync len
  drm/sched: Check scheduler ready before calling timeout handling

Merge tag 'amd-drm-fixes-6.3-2023-04-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.3-2023-04-19:

amdgpu:
- GPU reset fix
- DCN 3.1.5 line buffer fix
- Display fix for single channel memory configs
- Fix a possible divide by 0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420031717.7790-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-04-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v6.3 final:
- Fix fast wake AUX sync len
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87354w1b76.fsf@intel.com

Merge tag 'drm-misc-fixes-2023-04-20-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Short summary of fixes pull:

 * nouveau: fix dma-resv timeout
 * rockchip: fix suspend/resume
 * sched: fix timeout handling
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420083114.GA17651@linux-uq9g

Pull pci fix from Bjorn Helgaas:

 - Previously we ignored PCI devices if the DT "status" property or the
   ACPI _STA method said it was not present.

   Per spec, _STA cannot be used for that purpose, and using it that way
   caused regressions, so skip the _STA check (Rob Herring)

* tag 'pci-v6.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: Restrict device disabled status check to DT

Currently, a limit of 0 results in a hard coded metering over 6 hours.
Since the default is a set limit, I suspect no one truly depends on this
rather arbitrary setting. Repurpose it for an arguably more useful
"unlimited" mode, where the delay is 0.

Note that if block groups are too new, or go fully empty, there is still
a delay associated with those conditions. Those delays implement
heuristics for not trimming a region we are relatively likely to fully
overwrite soon.

CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Previously, the default was a relatively conservative 10. This results
in a 100ms delay, so with ~300 discards in a commit, it takes the full
30s till the next commit to finish the discards. On a workstation, this
results in the disk never going idle, wasting power/battery, etc.

Set the default to 1000, which results in using the smallest possible
delay, currently, which is 1ms. This has shown to not pathologically
keep the disk busy by the original reporter.

Link: https://lore.kernel.org/linux-btrfs/Y%2F+n1wS%2F4XAH7X1p@nz/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182228
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This partially reverts commit e161d4b6.

Turns out the channelmap variable is not actually read-only, it's modified
through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function,
so making it read-only causes page faults when that code is hit.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217183
Link: https://lore.kernel.org/r/20230413214118.153781-1-toke@toke.dk
Fixes: e161d4b6 ("wifi: ath9k: Make arrays prof_prio and channelmap static const")
Cc: stable@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Rust fixes from Miguel Ojeda:
 "Most of these are straightforward.

  The last one is more complex, but it only touches Rust + GCC builds
  which are for the moment best-effort.

   - Code: Missing 'extern "C"' fix.

   - Scripts: 'is_rust_module.sh' and 'generate_rust_analyzer.py' fixes.

   - A couple trivial fixes

   - Build: Rust + GCC build fix and 'grep' warning fix"

* tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux:
  rust: allow to use INIT_STACK_ALL_ZERO
  rust: fix regexp in scripts/is_rust_module.sh
  rust: build: Fix grep warning
  scripts: generate_rust_analyzer: Handle sub-modules with no Makefile
  rust: kernel: Mark rust_fmt_argument as extern "C"
  rust: sort uml documentation arch support table
  rust: str: fix requierments->requirements typo

Commit 6fffbc7a ("PCI: Honor firmware's device disabled status")
checked the firmware device status for both DT and ACPI devices. That
caused a regression in some ACPI systems. The exact reason isn't clear.
It's possibly a firmware bug. For now, at least, refactor the check to
be for DT based systems only.

Note that the original implementation leaked a refcount which is now
correctly handled.

[bhelgaas: Per ACPI r6.5, sec 6.3.7, for devices on an enumerable bus, _STA
must return with bit[0] ("device is present") set]

Link: https://lore.kernel.org/all/m2fs9lgndw.fsf@gmail.com/
Fixes: 6fffbc7a ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/r/20230419193513.708818-1-robh@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217317Reported-by: Donald Hunter <donald.hunter@gmail.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: Liu Peibao <liupeibao@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>