Set appropriate caps for DCN3.2.x.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

So we can eventaully use them in the common smu code for
accessing the SMU mailboxes without needing a lot of
per asic logic in the common code.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[How & Why]
To be enabled once PMFW supports it.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable the AGP aperture on chips with GMC v11.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check IP version rather than asic type.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY?]
If higher states have memory speed set to 0 MT/s currently they do not get set
to the highest value which can cause validation failures.

[HOW?]
Set unpopulated higher states to max value.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Drop all of the extra cases in the default case.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Rather than asic type.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VBIOS default clock value was halved, so the hardcoded dtb value should be
halved as well.

dtb clock should come from SMU eventually, but now dtb clock switching is not
fully supported yet in SMU.

Halve the dtb hardcoded value for now to have UHBR10 light up. Will rely on
SMU for dtb clock switching once available. The w/a is for DCN32 only, DCN321
should adopt the original value.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch will fix sdma doorbell issue on SDMA v6.0 and NBIO v7.7.0.
NBIO v7.7.0 uses a new reg function -- Common SDMA to allow a common
doorbell range for all SDMA queues, this is different to the old
NBIO version. This patch will add configuration for CSDMA and enable
SDMA doorbell function.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch will add CSDMA reg offsets for NBIO v7.7.0
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

APU required to issue the enable GFX IMU message after IMU reset.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GC v11_0_1 asic needs to issue the EnableGfxImu message after start IMU.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update MP v13_0_4 register macro for SMU message

v2: squash in missed case (Alex)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This adds mmhub v3_0_1 ip block support

v2: rebase (Alex)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add mmhub v3_0_1 headers, because there are many differeces with v3_0_0.

v2: squash in updates (Alex)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Switch to use the callback function to poll the reset status on IMU.
Because it will have different sequency on other ASICs.

v2: drop unused variable (Alex)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why?]
On wake from S3/S4, driver checks if DMUB is initialized. On S4 VBIOS loads
DMUB, and driver does not reload as it appears to be initialized already.

[How?]
Add a check for the DAL_FW bit to ensure that loaded FW is from driver and
not VBIOS.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Use correct clock source initialization routine for DCN32/321
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY&HOW]
Change criteria for setting DTO source value, and always set it regardless of
the signal type.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Disable idle optimizations until SMU can handle them to prevent DMUB
timeout and subsequent system freeze
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for watermark table transfers.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes to enable higher rate timings for DCN3.2.x.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY?]
DCN321 does not support FCLK DPM, and thus it should not send messages to
PMFW regarding it.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

IMU has two work mode such as debug mode and mission mode. Current GC
v11_0_0 is using the debug mode.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use DTBCLK for valid pixel clock generation
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
Need to add inst 5 for clk_src_regs because
there are 5 PHY instances in DCN32 & DCN321.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]

Add USBC connector ID to align with new VBIOS parsing.

Add seperate DCN321 link encoder due to different PHY version affecting
DP ALT related registers.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GFX11 IP introduces new tiling mode. Various combinations of DCC
settings are possible and the most preferred settings must be exposed
for optimal use of the hardware.

add_gfx11_modifiers() is based on recommendation from Marek for the
preferred tiling modifier that are most efficient for the hardware.

v2: microtiling fix noticed by Marek
v3: keep Z tiling check
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

align the cg and pg settings between gc_v11_0 and gc_v11_2
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why&How]
Add DCN32 to IP discovery to enable automatic initialization of AMDGPU
Display Manager
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add Display Manager specific changes for DCN3.2.x.  DM
handles the interaction between the core DC modesetting
code and the drm modesetting infrastructure.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fix mes11 api interface.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why&How]
This patch adds necessary changes needed in DC files outside DCN32/321
specific tree

v2: squash in updates (Alex)
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add core DC support for DCN 3.2.x.

v2: squash in fixup (Alex)
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for managing DCN3.2.x clocks.

v2: squash in smu interface updates (Alex)
v3: Drop unused SMU header (Alex)
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DML is required for display configuration modelling for things like
bandwidth management and validation.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>