- 16 Feb, 2018 34 commits
-
-
Eric Biggers authored
commit 794b4bc2 upstream. With the 'encrypted' key type it was possible for userspace to provide a data blob ending with a master key description shorter than expected, e.g. 'keyctl add encrypted desc "new x" @s'. When validating such a master key description, validate_master_desc() could read beyond the end of the buffer. Fix this by using strncmp() instead of memcmp(). [Also clean up the code to deduplicate some logic.] Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
Jin Qian <jinqian@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jesse Chan authored
commit 5331aec1 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
Jesse Chan <jc@linux.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 4cd87951 ] We don't stop device before reset owner, this means we could try to serve any virtqueue kick before reset dev->worker. This will result a warn since the work was pending at llist during owner resetting. Fix this by stopping device during owner reset. Reported-by: syzbot+eb17c6162478cc50632c@syzkaller.appspotmail.com Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server") Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 9b42d55a ] socket can be disconnected and gets transformed back to a listening socket, if sk_frag.page is not released, which will be cloned into a new socket by sk_clone_lock, but the reference count of this page is increased, lead to a use after free or double free issue Signed-off-by:
Li RongQing <lirongqing@baidu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Chunhao Lin authored
[ Upstream commit 086ca23d ] Driver check the wrong register bit in rtl_ocp_tx_cond() that keep driver waiting until timeout. Fix this by waiting for the right register bit. Signed-off-by:
Chunhao Lin <hau@realtek.com> Signed-off-by:
-
Junxiao Bi authored
[ Upstream commit 233ac389 ] The following soft lockup was caught. This is a deadlock caused by recusive locking. Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable bh.. [161846.962125] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/u40:1:28016] [161846.962367] Modules linked in: tun ocfs2 xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc sunrpc 8021q mrp garp bridge stp llc bonding dm_round_robin dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 shpchp lpc_ich mfd_core ioatdma ipmi_devintf ipmi_si ipmi_msghandler sg ext4 jbd2 mbcache2 sr_mod cdrom sd_mod igb i2c_algo_bit i2c_core ahci libahci megaraid_sas ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel qla2xxx scsi_transport_fc qlcnic crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod [161846.962454] [161846.962460] CPU: 1 PID: 28016 Comm: kworker/u40:1 Not tainted 4.1.12-94.5.9.el6uek.x86_64 #2 [161846.962463] Hardware name: Oracle Corporation SUN SERVER X4-2L /ASSY,MB,X4-2L , BIOS 26050100 09/19/2017 [161846.962489] Workqueue: qlcnic_mailbox qlcnic_83xx_mailbox_worker [qlcnic] [161846.962493] task: ffff8801f2e34600 ti: ffff88004ca5c000 task.ti: ffff88004ca5c000 [161846.962496] RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20 [161846.962506] RSP: e02b:ffff880202e43388 EFLAGS: 00000206 [161846.962509] RAX: 0000000000000000 RBX: ffff8801f6996b70 RCX: ffffffff810013aa [161846.962511] RDX: ffff880202e433cc RSI: ffff880202e433b0 RDI: 0000000000000003 [161846.962513] RBP: ffff880202e433d0 R08: 0000000000000000 R09: ffff8801fe893200 [161846.962516] R10: ffff8801fe400538 R11: 0000000000000206 R12: ffff880202e4b000 [161846.962518] R13: 0000000000000050 R14: 0000000000000001 R15: 000000000000020d [161846.962528] FS: 0000000000000000(0000) GS:ffff880202e40000(0000) knlGS:ffff880202e40000 [161846.962531] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [161846.962533] CR2: 0000000002612640 CR3: 00000001bb796000 CR4: 0000000000042660 [161846.962536] Stack: [161846.962538] ffff880202e43608 0000000000000000 ffffffff813f0442 ffff880202e433b0 [161846.962543] 0000000000000000 ffff880202e433cc ffffffff00000001 0000000000000000 [161846.962547] 00000009813f03d6 ffff880202e433e0 ffffffff813f0460 ffff880202e43440 [161846.962552] Call Trace: [161846.962555] <IRQ> [161846.962565] [<ffffffff813f0442>] ? xen_poll_irq_timeout+0x42/0x50 [161846.962570] [<ffffffff813f0460>] xen_poll_irq+0x10/0x20 [161846.962578] [<ffffffff81014222>] xen_lock_spinning+0xe2/0x110 [161846.962583] [<ffffffff81013f01>] __raw_callee_save_xen_lock_spinning+0x11/0x20 [161846.962592] [<ffffffff816e5c57>] ? _raw_spin_lock+0x57/0x80 [161846.962609] [<ffffffffa028acfc>] qlcnic_83xx_enqueue_mbx_cmd+0x7c/0xe0 [qlcnic] [161846.962623] [<ffffffffa028e008>] qlcnic_83xx_issue_cmd+0x58/0x210 [qlcnic] [161846.962636] [<ffffffffa028caf2>] qlcnic_83xx_sre_macaddr_change+0x162/0x1d0 [qlcnic] [161846.962649] [<ffffffffa028cb8b>] qlcnic_83xx_change_l2_filter+0x2b/0x30 [qlcnic] [161846.962657] [<ffffffff8160248b>] ? __skb_flow_dissect+0x18b/0x650 [161846.962670] [<ffffffffa02856e5>] qlcnic_send_filter+0x205/0x250 [qlcnic] [161846.962682] [<ffffffffa0285c77>] qlcnic_xmit_frame+0x547/0x7b0 [qlcnic] [161846.962691] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962696] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962701] [<ffffffff81630112>] sch_direct_xmit+0x112/0x220 [161846.962706] [<ffffffff8160b80f>] __dev_queue_xmit+0x1df/0x5e0 [161846.962710] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962721] [<ffffffffa0575bd5>] bond_dev_queue_xmit+0x35/0x80 [bonding] [161846.962729] [<ffffffffa05769fb>] __bond_start_xmit+0x1cb/0x210 [bonding] [161846.962736] [<ffffffffa0576a71>] bond_start_xmit+0x31/0x60 [bonding] [161846.962740] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962745] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962749] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962754] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962760] [<ffffffffa05cfa72>] vlan_dev_hard_start_xmit+0xb2/0x150 [8021q] [161846.962764] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962769] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962773] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962777] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962789] [<ffffffffa05adf74>] br_dev_queue_push_xmit+0x54/0xa0 [bridge] [161846.962797] [<ffffffffa05ae4ff>] br_forward_finish+0x2f/0x90 [bridge] [161846.962807] [<ffffffff810b0dad>] ? ttwu_do_wakeup+0x1d/0x100 [161846.962811] [<ffffffff815f929b>] ? __alloc_skb+0x8b/0x1f0 [161846.962818] [<ffffffffa05ae04d>] __br_forward+0x8d/0x120 [bridge] [161846.962822] [<ffffffff815f613b>] ? __kmalloc_reserve+0x3b/0xa0 [161846.962829] [<ffffffff810be55e>] ? update_rq_runnable_avg+0xee/0x230 [161846.962836] [<ffffffffa05ae176>] br_forward+0x96/0xb0 [bridge] [161846.962845] [<ffffffffa05af85e>] br_handle_frame_finish+0x1ae/0x420 [bridge] [161846.962853] [<ffffffffa05afc4f>] br_handle_frame+0x17f/0x260 [bridge] [161846.962862] [<ffffffffa05afad0>] ? br_handle_frame_finish+0x420/0x420 [bridge] [161846.962867] [<ffffffff8160d057>] __netif_receive_skb_core+0x1f7/0x870 [161846.962872] [<ffffffff8160d6f2>] __netif_receive_skb+0x22/0x70 [161846.962877] [<ffffffff8160d913>] netif_receive_skb_internal+0x23/0x90 [161846.962884] [<ffffffffa07512ea>] ? xenvif_idx_release+0xea/0x100 [xen_netback] [161846.962889] [<ffffffff816e5a10>] ? _raw_spin_unlock_irqrestore+0x20/0x50 [161846.962893] [<ffffffff8160e624>] netif_receive_skb_sk+0x24/0x90 [161846.962899] [<ffffffffa075269a>] xenvif_tx_submit+0x2ca/0x3f0 [xen_netback] [161846.962906] [<ffffffffa0753f0c>] xenvif_tx_action+0x9c/0xd0 [xen_netback] [161846.962915] [<ffffffffa07567f5>] xenvif_poll+0x35/0x70 [xen_netback] [161846.962920] [<ffffffff8160e01b>] napi_poll+0xcb/0x1e0 [161846.962925] [<ffffffff8160e1c0>] net_rx_action+0x90/0x1c0 [161846.962931] [<ffffffff8108aaba>] __do_softirq+0x10a/0x350 [161846.962938] [<ffffffff8108ae75>] irq_exit+0x125/0x130 [161846.962943] [<ffffffff813f03a9>] xen_evtchn_do_upcall+0x39/0x50 [161846.962950] [<ffffffff816e7ffe>] xen_do_hypervisor_callback+0x1e/0x40 [161846.962952] <EOI> [161846.962959] [<ffffffff816e5c4a>] ? _raw_spin_lock+0x4a/0x80 [161846.962964] [<ffffffff816e5b1e>] ? _raw_spin_lock_irqsave+0x1e/0xa0 [161846.962978] [<ffffffffa028e279>] ? qlcnic_83xx_mailbox_worker+0xb9/0x2a0 [qlcnic] [161846.962991] [<ffffffff810a14e1>] ? process_one_work+0x151/0x4b0 [161846.962995] [<ffffffff8100c3f2>] ? check_events+0x12/0x20 [161846.963001] [<ffffffff810a1960>] ? worker_thread+0x120/0x480 [161846.963005] [<ffffffff816e187b>] ? __schedule+0x30b/0x890 [161846.963010] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963015] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963021] [<ffffffff810a6b3e>] ? kthread+0xce/0xf0 [161846.963025] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963031] [<ffffffff816e6522>] ? ret_from_fork+0x42/0x70 [161846.963035] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963037] Code: cc 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e7aadb27 ] Newly added igmpv3_get_srcaddr() needs to be called under rcu lock. Timer callbacks do not ensure this locking. ============================= WARNING: suspicious RCU usage 4.15.0+ #200 Not tainted ----------------------------- ./include/linux/inetdevice.h:216 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syzkaller616973/4074: #0: (&mm->mmap_sem){++++}, at: [<00000000bfce669e>] __do_page_fault+0x32d/0xc90 arch/x86/mm/fault.c:1355 #1: ((&im->timer)){+.-.}, at: [<00000000619d2f71>] lockdep_copy_map include/linux/lockdep.h:178 [inline] #1: ((&im->timer)){+.-.}, at: [<00000000619d2f71>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1316 #2: (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] spin_lock_bh include/linux/spinlock.h:315 [inline] #2: (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] igmpv3_send_report+0x98/0x5b0 net/ipv4/igmp.c:600 stack backtrace: CPU: 0 PID: 4074 Comm: syzkaller616973 Not tainted 4.15.0+ #200 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4592 __in_dev_get_rcu include/linux/inetdevice.h:216 [inline] igmpv3_get_srcaddr net/ipv4/igmp.c:329 [inline] igmpv3_newpack+0xeef/0x12e0 net/ipv4/igmp.c:389 add_grhead.isra.27+0x235/0x300 net/ipv4/igmp.c:432 add_grec+0xbd3/0x1170 net/ipv4/igmp.c:565 igmpv3_send_report+0xd5/0x5b0 net/ipv4/igmp.c:605 igmp_send_report+0xc43/0x1050 net/ipv4/igmp.c:722 igmp_timer_expire+0x322/0x5c0 net/ipv4/igmp.c:831 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:541 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:938 Fixes: a46182b0 ("net: igmp: Use correct source address on IGMPv3 reports") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 4adfa79f ] When we dump the ip6mr mfc entries via proc, we initialize an iterator with the table to dump but we don't clear the cache pointer which might be initialized from a prior read on the same descriptor that ended. This can result in lock imbalance (an unnecessary unlock) leading to other crashes and hangs. Clear the cache pointer like ipmr does to fix the issue. Thanks for the reliable reproducer. Here's syzbot's trace: WARNING: bad unlock balance detected! 4.15.0-rc3+ #128 Not tainted syzkaller971460/3195 is trying to release lock (mrt_lock) at: [<000000006898068d>] ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 but there are no more locks to release! other info that might help us debug this: 1 lock held by syzkaller971460/3195: #0: (&p->lock){+.+.}, at: [<00000000744a6565>] seq_read+0xd5/0x13d0 fs/seq_file.c:165 stack backtrace: CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_unlock_imbalance_bug+0x12f/0x140 kernel/locking/lockdep.c:3561 __lock_release kernel/locking/lockdep.c:3775 [inline] lock_release+0x5f9/0xda0 kernel/locking/lockdep.c:4023 __raw_read_unlock include/linux/rwlock_api_smp.h:225 [inline] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 traverse+0x3bc/0xa00 fs/seq_file.c:135 seq_read+0x96a/0x13d0 fs/seq_file.c:189 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 BUG: sleeping function called from invalid context at lib/usercopy.c:25 in_atomic(): 1, irqs_disabled(): 0, pid: 3195, name: syzkaller971460 INFO: lockdep is turned off. CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6060 __might_sleep+0x95/0x190 kernel/sched/core.c:6013 __might_fault+0xab/0x1d0 mm/memory.c:4525 _copy_to_user+0x2c/0xc0 lib/usercopy.c:25 copy_to_user include/linux/uaccess.h:155 [inline] seq_read+0xcb4/0x13d0 fs/seq_file.c:279 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 WARNING: CPU: 1 PID: 3195 at lib/usercopy.c:26 _copy_to_user+0xb5/0xc0 lib/usercopy.c:26 Reported-by:
syzbot <bot+eceb3204562c41a438fa1f2335e0fe4f6886d669@syzkaller.appspotmail.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 520a13c5 upstream. The kernel test bot (run by Xiaolong Ye) reported that the following commit: f5caf621 ("x86/asm: Fix inline asm call constraints for Clang") is causing double faults in a kernel compiled with GCC 4.4. Linus subsequently diagnosed the crash pattern and the buggy commit and found that the issue is with this code: register unsigned int __asm_call_sp asm("esp"); #define ASM_CALL_CONSTRAINT "+r" (__asm_call_sp) Even on a 64-bit kernel, it's using ESP instead of RSP. That causes GCC to produce the following bogus code: ffffffff8147461d: 89 e0 mov %esp,%eax ffffffff8147461f: 4c 89 f7 mov %r14,%rdi ffffffff81474622: 4c 89 fe mov %r15,%rsi ffffffff81474625: ba 20 00 00 00 mov $0x20,%edx ffffffff8147462a: 89 c4 mov %eax,%esp ffffffff8147462c: e8 bf 52 05 00 callq ffffffff814c98f0 <copy_user_generic_unrolled> Despite the absurdity of it backing up and restoring the stack pointer for no reason, the bug is actually the fact that it's only backing up and restoring the lower 32 bits of the stack pointer. The upper 32 bits are getting cleared out, corrupting the stack pointer. So change the '__asm_call_sp' register variable to be associated with the actual full-size stack pointer. This also requires changing the __ASM_SEL() macro to be based on the actual compiled arch size, rather than the CONFIG value, because CONFIG_X86_64 compiles some files with '-m32' (e.g., realmode and vdso). Otherwise Clang fails to build the kernel because it complains about the use of a 64-bit register (RSP) in a 32-bit file. Reported-and-Bisected-and-Tested-by:
kernel test robot <xiaolong.ye@intel.com> Diagnosed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: LKP <lkp@01.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: f5caf621 ("x86/asm: Fix inline asm call constraints for Clang") Link: http://lkml.kernel.org/r/20170928215826.6sdpmwtkiydiytim@trebleSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Laurent Pinchart authored
commit 641307df upstream. When stopping the CRTC the driver must disable all planes and wait for the change to take effect at the next vblank. Merely calling drm_crtc_wait_one_vblank() is not enough, as the function doesn't include any mechanism to handle the race with vblank interrupts. Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that handles the vblank interrupt race. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
thongsyho <thong.ho.px@rvc.renesas.com> Signed-off-by:
Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by:
-
Laurent Pinchart authored
commit cbbb90b0 upstream. When implementing support for interlaced modes, the driver switched from reporting vblank events on the vertical blanking (VBK) interrupt to the frame end interrupt (FRM). This incorrectly divided the reported refresh rate by two. Fix it by moving back to the VBK interrupt. Fixes: 906eff7f ("drm: rcar-du: Implement support for interlaced modes") Signed-off-by:
-
Kuninori Morimoto authored
commit e0936c34 upstream. commit 1f8754d4 ("ASoC: rsnd: don't call free_irq() on Parent SSI") fixed Parent SSI duplicate free_irq(). But on Renesas Sound, not only Parent SSI but also Multi SSI have same issue. This patch avoid duplicate free_irq() if it was not pure SSI. Fixes: 1f8754d4 ("ASoC: rsnd: don't call free_irq() on Parent SSI") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kuninori Morimoto authored
commit 1f8754d4 upstream. If SSI uses shared pin, some SSI will be used as parent SSI. Then, normal SSI's remove and Parent SSI's remove (these are same SSI) will be called when unbind or remove timing. In this case, free_irq() will be called twice. This patch solve this issue. Signed-off-by:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Reported-by:
-
Julian Scheel authored
commit 7ac45d16 upstream. In case cpu could not be found the error message would always refer to /codec/ not being found in DT. Fix this by catching the cpu node not found case explicitly. Signed-off-by:
Julian Scheel <julian@jusst.de> Signed-off-by:
-
Matthias Hintzmann authored
ctx->drvflags is checked in the if clause before beeing initialized. Move initialization before first usage. Note, that the if clause was backported with commit 75f82a70 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") from mainline (upstream commit 2b02c20c ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices"). In mainline, the initialization is at the right place before the if clause. [mrkiko.rs@gmail.com: commit message tweaks] Fixes: 75f82a70 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Signed-off-by:
Matthias Hintzmann <matthias.dev@gmx.de> Signed-off-by:
-
Shuah Khan authored
Commit 3eee23c3ec14 ("usbip: prevent vhci_hcd driver from leaking a socket pointer address") backported the following commit from mailine. However, backport error caused the tcp_socket address to still leak. commit 2f2d0088 ("usbip: prevent vhci_hcd driver from leaking a socket pointer address") When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by:Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
Upstream commit 1c9de5bf ("usbip: vhci-hcd: Add USB3 SuperSpeed support") vhci_hcd clears all the bits port_status bits instead of clearing just the USB_PORT_STAT_POWER bit when it handles ClearPortFeature: USB_PORT_FEAT_POWER. This causes vhci_hcd attach to fail in a bad state, leaving device unusable by the client. The device is still attached and however client can't use it. The problem was fixed as part of larger change to add USB3 Super Speed support. This patch isolates the one line fix to clear the USB_PORT_STAT_POWER from the original patch. Signed-off-by:
-
Jesse Chan authored
commit 0cab20ce upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
-
Michael Ellerman authored
commit 236003e6 upstream. Expose the state of the RFI flush (enabled/disabled) via debugfs, and allow it to be enabled/disabled at runtime. eg: $ cat /sys/kernel/debug/powerpc/rfi_flush 1 $ echo 0 > /sys/kernel/debug/powerpc/rfi_flush $ cat /sys/kernel/debug/powerpc/rfi_flush 0 Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Michael Ellerman authored
commit fd6e440f upstream. The recent commit 87590ce6 ("sysfs/cpu: Add vulnerability folder") added a generic folder and set of files for reporting information on CPU vulnerabilities. One of those was for meltdown: /sys/devices/system/cpu/vulnerabilities/meltdown This commit wires up that file for 64-bit Book3S powerpc. For now we default to "Vulnerable" unless the RFI flush is enabled. That may not actually be true on all hardware, further patches will refine the reporting based on the CPU/platform etc. But for now we default to being pessimists. Signed-off-by:
-
Oliver O'Halloran authored
commit 6e032b35 upstream. New device-tree properties are available which tell the hypervisor settings related to the RFI flush. Use them to determine the appropriate flush instruction to use, and whether the flush is required. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Michael Neuling authored
commit 8989d568 upstream. A new hypervisor call is available which tells the guest settings related to the RFI flush. Use it to query the appropriate flush instruction(s), and whether the flush is required. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Michael Ellerman authored
commit bc9c9304 upstream. Because there may be some performance overhead of the RFI flush, add kernel command line options to disable it. We add a sensibly named 'no_rfi_flush' option, but we also hijack the x86 option 'nopti'. The RFI flush is not the same as KPTI, but if we see 'nopti' we can guess that the user is trying to avoid any overhead of Meltdown mitigations, and it means we don't have to educate every one about a different command line option. Signed-off-by:
-
Michael Ellerman authored
commit aa8a5e00 upstream. On some CPUs we can prevent the Meltdown vulnerability by flushing the L1-D cache on exit from kernel to user mode, and from hypervisor to guest. This is known to be the case on at least Power7, Power8 and Power9. At this time we do not know the status of the vulnerability on other CPUs such as the 970 (Apple G5), pasemi CPUs (AmigaOne X1000) or Freescale CPUs. As more information comes to light we can enable this, or other mechanisms on those CPUs. The vulnerability occurs when the load of an architecturally inaccessible memory region (eg. userspace load of kernel memory) is speculatively executed to the point where its result can influence the address of a subsequent speculatively executed load. In order for that to happen, the first load must hit in the L1, because before the load is sent to the L2 the permission check is performed. Therefore if no kernel addresses hit in the L1 the vulnerability can not occur. We can ensure that is the case by flushing the L1 whenever we return to userspace. Similarly for hypervisor vs guest. In order to flush the L1-D cache on exit, we add a section of nops at each (h)rfi location that returns to a lower privileged context, and patch that with some sequence. Newer firmwares are able to advertise to us that there is a special nop instruction that flushes the L1-D. If we do not see that advertised, we fall back to doing a displacement flush in software. For guest kernels we support migration between some CPU versions, and different CPUs may use different flush instructions. So that we are prepared to migrate to a machine with a different flush instruction activated, we may have to patch more than one flush instruction at boot if the hypervisor tells us to. In the end this patch is mostly the work of Nicholas Piggin and Michael Ellerman. However a cast of thousands contributed to analysis of the issue, earlier versions of the patch, back ports testing etc. Many thanks to all of them. Tested-by:
Jon Masters <jcm@redhat.com> Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
commit c7305645 upstream. In the SLB miss handler we may be returning to user or kernel. We need to add a check early on and save the result in the cr4 register, and then we bifurcate the return path based on that. Signed-off-by:
-
Nicholas Piggin authored
commit b8e90cb7 upstream. In the syscall exit path we may be returning to user or kernel context. We already have a test for that, because we conditionally restore r13. So use that existing test and branch, and bifurcate the return based on that. Signed-off-by:
-
Nicholas Piggin authored
commit a08f828c upstream. Similar to the syscall return path, in fast_exception_return we may be returning to user or kernel context. We already have a test for that, because we conditionally restore r13. So use that existing test and branch, and bifurcate the return based on that. Signed-off-by:
-
Nicholas Piggin authored
commit 222f20f1 upstream. This commit does simple conversions of rfi/rfid to the new macros that include the expected destination context. By simple we mean cases where there is a single well known destination context, and it's simply a matter of substituting the instruction for the appropriate macro. Signed-off-by:
-
Nicholas Piggin authored
commit 50e51c13 upstream. The rfid/hrfid ((Hypervisor) Return From Interrupt) instruction is used for switching from the kernel to userspace, and from the hypervisor to the guest kernel. However it can and is also used for other transitions, eg. from real mode kernel code to virtual mode kernel code, and it's not always clear from the code what the destination context is. To make it clearer when reading the code, add macros which encode the expected destination context. Signed-off-by:
-
Michael Neuling authored
commit 191eccb1 upstream. A new hypervisor call has been defined to communicate various characteristics of the CPU to guests. Add definitions for the hcall number, flags and a wrapper function. Signed-off-by:
-
Alan Modra authored
commit c153693d upstream. PowerPC64 uses the symbol .TOC. much as other targets use _GLOBAL_OFFSET_TABLE_. It identifies the value of the GOT pointer (or in powerpc parlance, the TOC pointer). Global offset tables are generally local to an executable or shared library, or in the kernel, module. Thus it does not make sense for a module to resolve a relocation against .TOC. to the kernel's .TOC. value. A module has its own .TOC., and indeed the powerpc64 module relocation processing ignores the kernel value of .TOC. and instead calculates a module-local value. This patch removes code involved in exporting the kernel .TOC., tweaks modpost to ignore an undefined .TOC., and the module loader to twiddle the section symbol so that .TOC. isn't seen as undefined. Note that if the kernel was compiled with -msingle-pic-base then ELFv2 would not have function global entry code setting up r2. In that case the module call stubs would need to be modified to set up r2 using the kernel .TOC. value, requiring some of this code to be reinstated. mpe: Furthermore a change in binutils master (not yet released) causes the current way we handle the TOC to no longer work when building with MODVERSIONS=y and RELOCATABLE=n. The symptom is that modules can not be loaded due to there being no version found for TOC. Signed-off-by:
Alan Modra <amodra@gmail.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 5a69aec9 upstream. VSX uses a combination of the old vector registers, the old FP registers and new "second halves" of the FP registers. Thus when we need to see the VSX state in the thread struct (flush_vsx_to_thread()) or when we'll use the VSX in the kernel (enable_kernel_vsx()) we need to ensure they are all flushed into the thread struct if either of them is individually enabled. Unfortunately we only tested if the whole VSX was enabled, not if they were individually enabled. Fixes: 72cd7b44 ("powerpc: Uncomment and make enable_kernel_vsx() routine available") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Backported due to changed context] Signed-off-by:
-
Oliver O'Halloran authored
commit 8f5f525d upstream. When the kernel is compiled to use 64bit ABIv2 the _GLOBAL() macro does not include a global entry point. A function's global entry point is used when the function is called from a different TOC context and in the kernel this typically means a call from a module into the vmlinux (or vice-versa). There are a few exported asm functions declared with _GLOBAL() and calling them from a module will likely crash the kernel since any TOC relative load will yield garbage. flush_icache_range() and flush_dcache_range() are both exported to modules, and use the TOC, so must use _GLOBAL_TOC(). Fixes: 721aeaa9 ("powerpc: Build little endian ppc64 kernel with ABIv2") Signed-off-by:
-
Naveen N. Rao authored
commit 844e3be4 upstream. Classic BPF JIT was never ported completely to work on little endian powerpc. However, it can be enabled and will crash the system when used. As such, disable use of BPF JIT on ppc64le. Fixes: 7c105b63 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.") Reported-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
- 03 Feb, 2018 6 commits
-
-
Greg Kroah-Hartman authored
-
Stefan Agner authored
commit d593574a upstream. Since clocks are disabled except during message transfer clocks are also disabled when spi_imx_remove gets called. Accessing registers leads to a freeeze at least on a i.MX 6ULL. Enable clocks before disabling accessing the MXC_CSPICTRL register. Fixes: 9e556dcc ("spi: spi-imx: only enable the clocks when we start to transfer a message") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Fabio Estevam authored
commit 38b1f0fb upstream. The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS lines, so only allow such wakeup method when the system actually has RTS/CTS support. Fixes: bc85734b ("serial: imx: allow waking up on RTSD") Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Martin Kaiser <martin@kaiser.cx> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Mark Salyzyn authored
In the absence of commit a4298e45 ("net: add SOCK_RCU_FREE socket flag") and all the associated infrastructure changes to take advantage of a RCU grace period before freeing, there is a heightened possibility that a security check is performed while an ill-timed setsockopt call races in from user space. It then is prudent to null check sk_security, and if the case, reject the permissions. Because of the nature of this problem, hard to duplicate, no clear path, this patch is a simplified band-aid for stable trees lacking the infrastructure for the series of commits leading up to providing a suitable RCU grace period. This adjustment is orthogonal to infrastructure improvements that may nullify the needed check, but could be added as good code hygiene in all trees. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14233 Comm: syz-executor2 Not tainted 4.4.112-g5f6325b #28 task: ffff8801d1095f00 task.stack: ffff8800b5950000 RIP: 0010:[<ffffffff81b69b7e>] [<ffffffff81b69b7e>] sock_has_perm+0x1fe/0x3e0 security/selinux/hooks.c:4069 RSP: 0018:ffff8800b5957ce0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff10016b2af9f RCX: ffffffff81b69b51 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000010 RBP: ffff8800b5957de0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 1ffff10016b2af68 R12: ffff8800b5957db8 R13: 0000000000000000 R14: ffff8800b7259f40 R15: 00000000000000d7 FS: 00007f72f5ae2700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000a2fa38 CR3: 00000001d7980000 CR4: 0000000000160670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffffffff81b69a1f ffff8800b5957d58 00008000b5957d30 0000000041b58ab3 ffffffff83fc82f2 ffffffff81b69980 0000000000000246 ffff8801d1096770 ffff8801d3165668 ffffffff8157844b ffff8801d1095f00 ffff880000000001 Call Trace: [<ffffffff81b6a19d>] selinux_socket_setsockopt+0x4d/0x80 security/selinux/hooks.c:4338 [<ffffffff81b4873d>] security_socket_setsockopt+0x7d/0xb0 security/security.c:1257 [<ffffffff82df1ac8>] SYSC_setsockopt net/socket.c:1757 [inline] [<ffffffff82df1ac8>] SyS_setsockopt+0xe8/0x250 net/socket.c:1746 [<ffffffff83776499>] entry_SYSCALL_64_fastpath+0x16/0x92 Code: c2 42 9b b6 81 be 01 00 00 00 48 c7 c7 a0 cb 2b 84 e8 f7 2f 6d ff 49 8d 7d 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 83 01 00 00 41 8b 75 10 31 RIP [<ffffffff81b69b7e>] sock_has_perm+0x1fe/0x3e0 security/selinux/hooks.c:4069 RSP <ffff8800b5957ce0> ---[ end trace 7b5aaf788fef6174 ]--- Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Acked-by:
Paul Moore <paul@paul-moore.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: selinux@tycho.nsa.gov Cc: linux-security-module@vger.kernel.org Cc: Eric Paris <eparis@parisplace.org> Cc: Serge E. Hallyn <serge@hallyn.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Oliver Neukum authored
commit cbeef22f upstream. Quoting Hans: If we return 1 from our post_reset handler, then our disconnect handler will be called immediately afterwards. Since pre_reset blocks all scsi requests our disconnect handler will then hang in the scsi_remove_host call. This is esp. bad because our disconnect handler hanging for ever also stops the USB subsys from enumerating any new USB devices, causes commands like lsusb to hang, etc. In practice this happens when unplugging some uas devices because the hub code may see the device as needing a warm-reset and calls usb_reset_device before seeing the disconnect. In this case uas_configure_endpoints fails with -ENODEV. We do not want to print an error for this, so this commit also silences the shost_printk for -ENODEV. ENDQUOTE However, if we do that we better drop any unconditional execution and report to the SCSI subsystem that we have undergone a reset but we are not operational now. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hemant Kumar authored
commit ce5bf9a5 upstream. Upon usb composition switch there is possibility of ep0 file release happening after gadget driver bind. In case of composition switch from adb to a non-adb composition gadget will never gets bound again resulting into failure of usb device enumeration. Fix this issue by checking FFS_FL_BOUND flag and avoid extra gadget driver unbind if it is already done as part of composition switch. This fixes adb reconnection error reported on Android running v4.4 and above kernel versions. Verified on Hikey running vanilla v4.15-rc7 + few out of tree Mali patches. Reviewed-at: https://android-review.googlesource.com/#/c/582632/ Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg KH <gregkh@linux-foundation.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Badhri <badhri@google.com> Cc: Android Kernel Team <kernel-team@android.com> Signed-off-by:
Hemant Kumar <hemantk@codeaurora.org> [AmitP: Cherry-picked it from android-4.14 and updated the commit log] Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
