- 18 Jan, 2024 2 commits
-
-
Karthikeyan Periyasamy authored
ENOTSUPP is not a standard error code, don't use it. Replace with EOPNOTSUPP instead. No functional changes, compile tested only. Signed-off-by:
Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240117080431.2907471-3-quic_periyasa@quicinc.com
-
Karthikeyan Periyasamy authored
ENOTSUPP is not a standard error code, don't use it. Replace with EOPNOTSUPP instead. No functional changes, compile tested only. Signed-off-by:
-
- 17 Jan, 2024 2 commits
-
-
Karthikeyan Periyasamy authored
Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Karthikeyan Periyasamy authored
Currently, QMI MLO host capability parameters are specific to the WCN7850 platform. To make use of this helper function across all the platforms, move the platform specific MLO capability parameter to the HW param configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
- 16 Jan, 2024 15 commits
-
-
Jeff Johnson authored
Commit 7636c9a6 ("wifi: ath11k: Add multi TX ring support for WCN6750") added HAL_RX_BUF_RBM_SW4_BM to enum hal_rx_buf_return_buf_manager. However, as flagged by the kernel-doc script, the documentation was not updated: drivers/net/wireless/ath/ath11k/hal.h:689: warning: Enum value 'HAL_RX_BUF_RBM_SW4_BM' not described in enum 'hal_rx_buf_return_buf_manager' So update the documentation. No functional changes, compile tested only. Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, remove the mac80211 hw data dependency from the start vdev delay function. This way, this function can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback flush(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback ampdu_action(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback configure_filter(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback update_vif_offload(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback stop(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback start(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback conf_tx(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback bss_info_change(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback config(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Karthikeyan Periyasamy authored
Currently, the mac80211 hw registration procedure is tightly coupled with the handling of link/radio (ar). Define a new helper function to separate the link/radio handling from the mac80211 hw registration procedure for improved code readability. Also, it can be easy to scale these functionality to support single/multi link operation in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Karthikeyan Periyasamy authored
Currently, the MAC setup helper function is accessing the mac80211 hw data. In the future, to support single/multi link operation, need to decouple the mac80211 hw data from this helper function so that it can be easy to scale these functions to support single/multi link operations. So remove the mac80211 hw access from the ath12k_mac_setup_channels_rates() helper function. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Karthikeyan Periyasamy authored
Currently, the MAC allocation and destroy helper functions are tightly coupled with the link/radio (ar) structure. In the future, to support single/Multi link operations, need to refactor these helper functions across the core and mac sub modules, so that it can be easy to scale these functions to support single/Multi link operations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Karthikeyan Periyasamy authored
Currently, the data path pdev pre alloc and mac allocate are called separately from the core start procedure. The data path pdev pre alloc can be called from the mac allocate procedure itself since initialization related to pdev happens in the mac allocate procedure. So move the caller of DP pdev pre alloc from the core start procedure to the mac allocate procedure. This change helps in the future to easily decouple the mac allocate procedure from core start handling in order to support MLO in multi chip. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
- 14 Jan, 2024 15 commits
-
-
Jeff Johnson authored
Currently most of the QMI messaging functions use memset() to zero out the QMI message buffers. Prefer to use a {} initializer to allow the compiler to generate optimized code and avoid the function call overhead. No functional changes, compile tested only. Signed-off-by: -
Jeff Johnson authored
Per the QMI documentation "A client calling qmi_txn_init() must call either qmi_txn_wait() or qmi_txn_cancel() to free up the allocated resources." Unfortunately, in most of the ath12k messaging functions, when qmi_send_request() fails, the function returns without performing the necessary cleanup. So update those functions to call qmi_txn_cancel() when qmi_send_request() fails. No functional changes, compile tested only. Signed-off-by:
-
Jeff Johnson authored
Currently most of the ath12k QMI messaging functions define their struct qmi_txn variables with a {} initializer. However, all of these functions subsequently call qmi_txn_init(), and the very first thing that function does is zero the struct. Hence, the initializers are unnecessary. Since these consume code space and cpu cycles, remove them. No functional changes, compile tested only. Signed-off-by: -
Wen Gong authored
When station is connected to a 6 GHz AP, it has 2 ways to configure the power limit to firmware. The first way is to send 2 WMI commands WMI_PDEV_PARAM_TXPOWER_LIMIT2G/WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware, the second way is to send WMI_VDEV_SET_TPC_POWER_CMDID to firmware which include more parameters for power control. When firmware supports SERVICE_EXT_TPC_REG, it means firmware supports WMI_VDEV_SET_TPC_POWER_CMDID, then ath11k selects the second way. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
Wen Gong <quic_wgong@quicinc.com> Signed-off-by:
Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by:
-
Wen Gong authored
Add the handler for WMI_VDEV_SET_TPC_POWER_CMDID, it is for 6 GHz band. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
Wen Gong authored
Firmware advertises support for SERVICE_EXT_TPC_REG via a WMI service bit. Add the definition of this service bit so that a subsequent patch can check whether or not firmware supports this service. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
Wen Gong authored
Prepare the parameters which are needed for WMI command WMI_VDEV_SET_TPC_POWER_CMDID. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
Wen Gong authored
Save the max transmit power received in the vdev start response event from firmware. A subsequent patch will use this to calculate the final power value for WMI_VDEV_SET_TPC_POWER_CMDID. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
Wen Gong authored
The transmit power envelope element has some fields for power, ath11k should parse it according to IEEE Std 802.11ax
™ ‐2021. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: -
Wen Gong authored
Save the power spectral density (PSD) report from firmware to struct ieee80211_reg_rule. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
Wen Gong authored
When station connect to AP on 6 GHz band, it needs switch the regulatory rules according to the regulatory info sub field in HE operation element. Switch to the power type which AP used for station interface. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
Wen Gong authored
There are two power types for 6 GHz regulatory, one is AP, another is client. When firmware boots up, WMI_REG_CHAN_LIST_CC_EXT_EVENTID is sent from firmware at an early stage, the interface mode is not decided at this point, then ath11k select reg rules of AP type as default. After interface is created, it is exactly decided the interface type such as AP/mesh point/station. Then ath11k need to update reg rules to the exact power type matched to the interface type. The client power type is used for station interface, and AP power type is used for AP/mesh point interface. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
Baochen Qiang authored
spin_lock()/spin_unlock() are used in ath11k_reg_chan_list_event() to acquire/release ab->base_lock. For now this is safe because that function is only called in soft IRQ context. But ath11k_reg_chan_list_event() will be called from process context in an upcoming patch, and this can result in a deadlock if ab->base_lock is acquired in process context and then soft IRQ occurs on the same CPU and tries to acquire that lock. Fix it by using spin_lock_bh() and spin_unlock_bh() instead. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: 69a0fcf8 ("ath11k: Avoid reg rules update during firmware recovery") Signed-off-by:
-
Wen Gong authored
The regulatory info of WMI_REG_CHAN_LIST_CC_EXT_EVENTID is not saved in ath11k now, the info should be saved in ath11k. Save the info for each radio and support switch regulatory rules dynamically. As mac.c will also call ath11k_reg_handle_chan_list() in next patches move the function to reg.c. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
Wen Gong authored
There are 3 types of regulatory rules for AP mode and 6 type for station mode. Add wmi_vdev_type and ieee80211_ap_reg_power to select the exact reg rules. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by:
-
- 11 Jan, 2024 2 commits
-
-
Dmitry Antipov authored
Since 'ath12k_wmi_tlv_parse_alloc()' always operates on 'skb->data, skb->len' tuple, it may be simplified to pass the only 'skb' argument instead (which implies refactoring of 'ath12k_pull_bcn_tx_status_ev()', 'ath12k_pull_chan_info_ev()' and 'ath12k_pull_pdev_temp_ev()' in the same way). This is an ath12k counterpart of the recently submitted ath11k patch and compile tested only as well. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by:
-
Zhenghao Gu authored
virt_to_phys() doesn't work on systems with IOMMU enabled, which have non-identity physical-to-IOVA mappings. It leads to IO_PAGE_FAULTs like this: [IO_PAGE_FAULT domain=0x0023 address=0x1cce00000 flags=0x0020] And no association to the AP can be established. This patch changes that to dma_map_single(), which works correctly. Even virt_to_phys() documentation says device drivers should not use it: This function does not give bus mappings for DMA transfers. In almost all conceivable cases a device driver should not be using this function Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by:Zhenghao Gu <imguzh@gmail.com> Acked-by:
-
- 20 Dec, 2023 1 commit
-
-
Jeff Johnson authored
Commit ff6d3658 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by:
-
- 18 Dec, 2023 3 commits
-
-
Baochen Qiang authored
Sometimes board-2.bin does not have the regdb data which matches the parameters such as vendor, device, subsystem-vendor, subsystem-device etc. Add default regdb data with only 'bus=%s' into board-2.bin for WCN7850, then ath12k uses 'bus=pci' to search regdb data in board-2.bin for WCN7850. [ 46.114895] ath12k_pci 0000:03:00.0: boot using board name 'bus=pci,vendor=17cb,device=1107,subsystem-vendor=17cb,subsystem-device=3378,qmi-chip-id=2,qmi-board-id=260' [ 46.118167] ath12k_pci 0000:03:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 380280 [ 46.118173] ath12k_pci 0000:03:00.0: board name [ 46.118176] ath12k_pci 0000:03:00.0: 00000000: 62 75 73 3d 70 63 69 bus=pci [ 46.118179] ath12k_pci 0000:03:00.0: failed to fetch regdb data for bus=pci,vendor=17cb,device=1107,subsystem-vendor=17cb,subsystem-device=3378,qmi-chip-id=2,qmi-board-id=260 from ath12k/WCN7850/hw2.0/board-2.bin [ 46.118239] ath12k_pci 0000:03:00.0: boot using board name 'bus=pci' [ 46.119842] ath12k_pci 0000:03:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 380280 [ 46.119847] ath12k_pci 0000:03:00.0: board name [ 46.119849] ath12k_pci 0000:03:00.0: 00000000: 62 75 73 3d 70 63 69 bus=pci [ 46.119852] ath12k_pci 0000:03:00.0: boot found match regdb data for name 'bus=pci' [ 46.119855] ath12k_pci 0000:03:00.0: boot found regdb data for 'bus=pci' [ 46.119857] ath12k_pci 0000:03:00.0: fetched regdb Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Wen Gong authored
Currently ath12k only downloads the same regdb.bin file for all WCN7850 chips, actually ath12k needs to distinguish all different WCN7850 chips. This is to re-use the string type which includes bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN7850 to distinguish different regdb in board-2.bin. ath12k will first load board-2.bin and search in it for the regdb data with the above parameters. If matched with one regdb data, download it to firmware. And if not, download regdb.bin instead. Add enum value ATH12K_BD_IE_REGDB and enum type ath12k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. Test log: [ 3833.091948] ath12k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath12k_pci 0000:05:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 205316 [ 3833.092079] ath12k_pci 0000:05:00.0: board name [ 3833.092083] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath12k_pci 0000:05:00.0: board name [ 3833.092095] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath12k_pci 0000:05:00.0: board name [ 3833.092105] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath12k_pci 0000:05:00.0: board name [ 3833.092116] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath12k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath12k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath12k_pci 0000:05:00.0: board name [ 3833.092150] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath12k_pci 0000:05:00.0: board name [ 3833.092209] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath12k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath12k_pci 0000:05:00.0: board name [ 3833.092241] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath12k_pci 0000:05:00.0: board name [ 3833.092251] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath12k_pci 0000:05:00.0: board name [ 3833.092261] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath12k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath12k_pci 0000:05:00.0: fetched regdb Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Wen Gong authored
Currently ATH12K_BD_IE_BOARD_EXT is not used, so remove it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
