For a while, we've had the problem of i2c bus access not grabbing
a runtime PM ref when it's being used in userspace by i2c-dev, resulting
in nouveau spamming the kernel log with errors if anything attempts to
access the i2c bus while the GPU is in runtime suspend. An example:

[  130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff

Since the GPU is in runtime suspend, the MMIO region that the i2c bus is
on isn't accessible. On x86, the standard behavior for accessing an
unavailable MMIO region is to just return ~0.

Except, that turned out to be a lie. While computers with a clean
concious will return ~0 in this scenario, some machines will actually
completely hang a CPU on certian bad MMIO accesses. This was witnessed
with someone's Lenovo ThinkPad P50, where sensors-detect attempting to
access the i2c bus while the GPU was suspended would result in a CPU
hang:

  CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1
  Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017
  RIP: 0010:ioread32+0x2b/0x30
  Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3
  48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f
  40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48
  RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13
  RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186
  RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4
  RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7
  R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000
  R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000
  FS:  00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   g94_i2c_aux_xfer+0x326/0x850 [nouveau]
   nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau]
   __i2c_transfer+0x14b/0x620
   i2c_smbus_xfer_emulated+0x159/0x680
   ? _raw_spin_unlock_irqrestore+0x1/0x60
   ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0
   ? __lock_is_held+0x59/0xa0
   __i2c_smbus_xfer+0x138/0x5a0
   i2c_smbus_xfer+0x4f/0x80
   i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev]
   i2cdev_ioctl+0x1db/0x2c0 [i2c_dev]
   do_vfs_ioctl+0x408/0x750
   ksys_ioctl+0x5e/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x60/0x1e0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f25317f546b
  Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
  ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
  f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b
  RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003
  RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0
  R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80
  R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0
  watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438]

Yikes! While I wanted to try to make it so that accessing an i2c bus on
nouveau would wake up the GPU as needed, airlied pointed out that pretty
much any usecase for userspace accessing an i2c bus on a GPU (mainly for
the DDC brightness control that some displays have) is going to only be
useful while there's at least one display enabled on the GPU anyway, and
the GPU never sleeps while there's displays running.

Since teaching the i2c bus to wake up the GPU on userspace accesses is a
good deal more difficult than it might seem, mostly due to the fact that
we have to use the i2c bus during runtime resume of the GPU, we instead
opt for the easiest solution: don't let userspace access i2c busses on
the GPU at all while it's in runtime suspend.

Changes since v1:
* Also disable i2c busses that run over DP AUX
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Commit 3a6536c5 ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE")
added a definition of ACPI_VIDEO_NOTIFY_PROBE because <acpi/video.h> didn't
supply one.  Later, commit eff4a751 ("ACPI / video: Move
ACPI_VIDEO_NOTIFY_* defines to acpi/video.h") moved ACPI_VIDEO_NOTIFY_PROBE
and other definitions to <acpi/video.h>, so the copy in nouveau_display.c
is now unnecessary.

Remove the unnecessary definition from nouveau_display.c.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

If the BAR initialization failed it may leave the vmm structure in an
unitialized state, leading to a null-pointer-dereference when the vmm is
dereferenced during teardown.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Check bar1's new vmm creation return value for errors.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Merge tag 'drm-intel-next-fixes-2019-04-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Use after free fix during GEM_CREATE when reporting back object size
- Icelake DP register programming order fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425061312.GA2919@jlahtine-desk.ger.corp.intel.com

Merge tag 'drm-misc-next-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

- fb_helper: Fix NULL deref in legacy drivers (Noralf)
- leases: Ensure lessees can't connect to objects outside their perview (Daniel)
- leases: Enforce that lessees hold the lease for implicitly set planes (Daniel)
- leases: A few non-functional cleanups (Daniel)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424210604.GA32581@art_vandelay

Non-atomic drivers like ast doesn't have connector->state set resulting
in a NULL pointer deref:

[   29.609593] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[   29.609619] Call Trace:
[   29.609630]  ? drm_helper_probe_single_connector_modes+0x27f/0x680
[   29.609640]  drm_setup_crtcs+0x431/0xd80 [drm_kms_helper]
[   29.753065]  __drm_fb_helper_initial_config_and_unlock+0x6f/0x6a0
[   29.753160]  ? drm_modeset_unlock_all+0x31/0x50 [drm]
[   29.765758]  ast_fbdev_init+0xa8/0xc0 [ast]
[   29.765762]  ast_driver_load.cold.7+0x2b3/0xe11 [ast]
[   29.765775]  drm_dev_register+0x111/0x150 [drm]

Fix by bailing out if the driver does not support atomic modesetting.

Fixes: 09ded8af ("drm/i915/fbdev: Move intel_fb_initial_config() to fbdev helper")
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423145353.30158-1-noralf@tronnes.org

With the previous patch drm_crtc_find will return NULL when the crtc
isn't in our lease, which will then disable the plane/connector. No
longer an issue since the lessor can't escape their lease terms
anymore, but not quite great semantics yet either.

Catch this and return -EACCES, so that at least evil test cases have a
better chance of making sure the kernel works correctly.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-8-daniel.vetter@ffwll.ch

We need this to make sure lessees can only connect their
plane/connectors to crtc objects they own. And note that this is
irrespective of whether the lessor is atomic or not, lessor cannot
prevent lessees from enabling atomic.

Cc: stable@vger.kernel.org
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-7-daniel.vetter@ffwll.ch

If userspace doesn't enable universal planes, then we automatically
add the primary and cursor planes. But for universal userspace there's
no such check (and maybe we only want to give the lessee one plane,
maybe not even the primary one), hence we need to check for the
implied plane.

v2: don't forget setcrtc ioctl.

v3: Still allow disabling of the crtc in SETCRTC.

Cc: stable@vger.kernel.org
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-6-daniel.vetter@ffwll.ch

The lessor is invariant over a lifetime of a lease, we don't have to
grab any locks for that. Speeds up the common case of not being a lease.

Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-5-daniel.vetter@ffwll.ch

We kzalloc.

Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-4-daniel.vetter@ffwll.ch

We disallow subleasing, so no point checking whether the master holds
all the leases - it will.

Spotted while typing exhaustive igt coverage for all these corner
cases.

Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-3-daniel.vetter@ffwll.ch

Not exactly sure what's the aim here, but the canonical nil object has
id == 0, we don't use negative object ids for anything. Plus all
object_id are valided by the object_idr, there's nothing we need to do
on top of that ENOENT check a bit further down.

Spotted while typing exhaustive igt coverage for all these
corner-cases.

Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-2-daniel.vetter@ffwll.ch

Pull legacy cleanups from Dave.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAPM=9tztr1GoR0gr1CXPv8FsAXE4iuoRZDWKYovtnb6oDGF-Lg@mail.gmail.com

This code moved in here in master, so revert it the same way.

This is the same revert as 9fa24625 ("Revert "drm/i915/fbdev:
Actually configure untiled displays"") in drm-fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fix the order of lane, port parameters passed to the register macro.

Note that this was already partly fixed by commit
37fc7845 ("drm/i915: Call MG_DP_MODE() macro with the right parameters order")

While at it simplify things by using the macro directly instead of an
unnecessary redirection via an array.

v2:
- Add a note the commit message about simplifying things. (José)

Fixes: 58106b7d ("drm/i915: Make MG PHY macros semantically consistent")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419071026.32370-1-imre.deak@intel.com
(cherry picked from commit 9c11b121)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

We have to avoid chasing after a userspace race!

<3>[  473.114328] BUG: KASAN: use-after-free in i915_gem_create+0x1d2/0x1f0 [i915]
<3>[  473.114389] Read of size 8 at addr ffff88815bf1d840 by task gem_flink_race/1541

<4>[  473.114464] CPU: 1 PID: 1541 Comm: gem_flink_race Tainted: G     U            5.1.0-rc4-g7d07e025e786-kasan_88+ #1
<4>[  473.114469] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.10 09/29/2016
<4>[  473.114474] Call Trace:
<4>[  473.114488]  dump_stack+0x7c/0xbb
<4>[  473.114612]  ? i915_gem_create+0x1d2/0x1f0 [i915]
<4>[  473.114621]  print_address_description+0x65/0x270
<4>[  473.114728]  ? i915_gem_create+0x1d2/0x1f0 [i915]
<4>[  473.114839]  ? i915_gem_create+0x1d2/0x1f0 [i915]
<4>[  473.114848]  kasan_report+0x149/0x18d
<4>[  473.114962]  ? i915_gem_create+0x1d2/0x1f0 [i915]
<4>[  473.115069]  i915_gem_create+0x1d2/0x1f0 [i915]
<4>[  473.115176]  ? i915_gem_object_create.part.28+0x4b0/0x4b0 [i915]
<4>[  473.115289]  ? i915_gem_dumb_create+0x1a0/0x1a0 [i915]
<4>[  473.115297]  drm_ioctl_kernel+0x192/0x260
<4>[  473.115306]  ? drm_ioctl_permit+0x280/0x280
<4>[  473.115326]  drm_ioctl+0x67c/0x960
<4>[  473.115438]  ? i915_gem_dumb_create+0x1a0/0x1a0 [i915]
<4>[  473.115448]  ? drm_getstats+0x20/0x20
<4>[  473.115459]  ? __lock_acquire+0xa66/0x3fe0
<4>[  473.115474]  ? _raw_spin_unlock_irqrestore+0x39/0x60
<4>[  473.115485]  ? debug_object_active_state+0x2ea/0x4e0
<4>[  473.115496]  ? debug_show_all_locks+0x2d0/0x2d0
<4>[  473.115513]  do_vfs_ioctl+0x18d/0xfa0
<4>[  473.115522]  ? check_flags.part.27+0x440/0x440
<4>[  473.115532]  ? ioctl_preallocate+0x1a0/0x1a0
<4>[  473.115547]  ? __fget+0x2ac/0x410
<4>[  473.115561]  ? __ia32_sys_dup3+0xb0/0xb0
<4>[  473.115569]  ? rwlock_bug.part.0+0x90/0x90
<4>[  473.115590]  ksys_ioctl+0x35/0x70
<4>[  473.115597]  ? lockdep_hardirqs_off+0x1cb/0x2b0
<4>[  473.115608]  __x64_sys_ioctl+0x6a/0xb0
<4>[  473.115614]  ? lockdep_hardirqs_on+0x342/0x590
<4>[  473.115623]  do_syscall_64+0x97/0x400
<4>[  473.115633]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  473.115641] RIP: 0033:0x7fce590d55d7
<4>[  473.115649] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48
<4>[  473.115655] RSP: 002b:00007fce4d525ba8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
<4>[  473.115662] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fce590d55d7
<4>[  473.115667] RDX: 00007fce4d525c10 RSI: 00000000c010645b RDI: 0000000000000007
<4>[  473.115672] RBP: 00007fce4d525c10 R08: 00007fce4d526700 R09: 00007fce4d526700
<4>[  473.115677] R10: 0000000000000054 R11: 0000000000000246 R12: 00000000c010645b
<4>[  473.115682] R13: 0000000000000007 R14: 0000000000000000 R15: 00007ffe0e4a7450

<3>[  473.115731] Allocated by task 1541:
<4>[  473.115766]  kmem_cache_alloc+0xce/0x290
<4>[  473.115895]  i915_gem_object_create.part.28+0x1c/0x4b0 [i915]
<4>[  473.116000]  i915_gem_create+0xe3/0x1f0 [i915]
<4>[  473.116008]  drm_ioctl_kernel+0x192/0x260
<4>[  473.116013]  drm_ioctl+0x67c/0x960
<4>[  473.116020]  do_vfs_ioctl+0x18d/0xfa0
<4>[  473.116026]  ksys_ioctl+0x35/0x70
<4>[  473.116032]  __x64_sys_ioctl+0x6a/0xb0
<4>[  473.116038]  do_syscall_64+0x97/0x400
<4>[  473.116044]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

<3>[  473.116071] Freed by task 1542:
<4>[  473.116101]  kmem_cache_free+0xb7/0x2f0
<4>[  473.116205]  __i915_gem_free_objects+0x7d4/0xe10 [i915]
<4>[  473.116311]  i915_gem_create_ioctl+0xaa/0xd0 [i915]
<4>[  473.116318]  drm_ioctl_kernel+0x192/0x260
<4>[  473.116323]  drm_ioctl+0x67c/0x960
<4>[  473.116330]  do_vfs_ioctl+0x18d/0xfa0
<4>[  473.116335]  ksys_ioctl+0x35/0x70
<4>[  473.116341]  __x64_sys_ioctl+0x6a/0xb0
<4>[  473.116347]  do_syscall_64+0x97/0x400
<4>[  473.116354]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Testcase: igt/gem_flink_race/flink_close
Fixes: e163484a ("drm/i915: Update size upon return from GEM_CREATE")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190417132507.27133-1-chris@chris-wilson.co.uk
(cherry picked from commit 99534023)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

This should help with some of the lifetime issues, and move us away
from load/unload.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-4-airlied@gmail.com

This just makes it easier to later embed drm into udl.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-3-airlied@gmail.com

Merge tag 'exynos-drm-next-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Log cleanups
- Correct the use of log macro in error case.
- Drop unnecessary messages.
- Replace DRM_ERROR/DEBUG with DRM_DEV_ERROR/DEBUG.
- Print out debug messages with correct device name in vidi and ipp drivers.

One trivial cleanup
- Just fix checkpatch error, "foo* bar" to "foo *bar" in g2d driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1556073313-9923-1-git-send-email-inki.dae@samsung.com

This removes these unless legacy is enabled.

The lock count init is unneeded anyways since it's kzalloc.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This places a bunch of the legacy members of drm_device into
only being there when legacy is enabled.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

If you don't want the legacy drivers, then lets get rid of all the
legacy codepaths from the core module.

This drop the size of drm.ko for me by about 10%.
 380515    7422    4192  392129   5fbc1 ../../drm-next-build/drivers/gpu/drm/drm.ko
 351736	   7298	   4192	 363226	  58ada	../../drm-next-build/drivers/gpu/drm/drm.ko

v2: drop drm_lock as well, fix some DMA->DRM typos
v3: avoid ifdefs in mainline code
v4: rework ioctl defs
v4.1: fix nouveau Kconfig
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This could probably be done with Kconfig somehow, but I failed in my
first 2 minute attempt.

v2: use Kconfig better.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This moves the legacy dev reinit into the legacy misc file.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This introduces drm_legacy_misc.c as a place for some misc legacy code,
eventually I want to give the option to remove this from the build.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This allows them to be removed later.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This makes it easier to remove legacy code later.

v2: move check into lock file as well.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This makes it easier to clean this up later.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This isn't used by drivers, and won't be in the future.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There was a nouveau DDX that relied on legacy context ioctls to work,
but we fixed it years ago, give distros that have a modern DDX the
option to break the uAPI and close the mess of holes that legacy
context support is.

Full context of the story:

commit 0e975980
Author: Peter Antoine <peter.antoine@intel.com>
Date:   Tue Jun 23 08:18:49 2015 +0100

    drm: Turn off Legacy Context Functions

    The context functions are not used by the i915 driver and should not
    be used by modeset drivers. These driver functions contain several bugs
    and security holes. This change makes these functions optional can be
    turned on by a setting, they are turned off by default for modeset
    driver with the exception of the nouvea driver that may require them with
    an old version of libdrm.

    The previous attempt was

    commit 7c510133
    Author: Daniel Vetter <daniel.vetter@ffwll.ch>
    Date:   Thu Aug 8 15:41:21 2013 +0200

        drm: mark context support as a legacy subsystem

    but this had to be reverted

    commit c21eb21c
    Author: Dave Airlie <airlied@redhat.com>
    Date:   Fri Sep 20 08:32:59 2013 +1000

        Revert "drm: mark context support as a legacy subsystem"

    v2: remove returns from void function, and formatting (Daniel Vetter)

    v3:
    - s/Nova/nouveau/ in the commit message, and add references to the
      previous attempts
    - drop the part touching the drm hw lock, that should be a separate
      patch.

    Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2)
    Cc: Peter Antoine <peter.antoine@intel.com> (v2)
Reviewed-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

v2: move DRM_VM dependency into legacy config.
v3: fix missing dep (kbuild robot)

Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Print out debug messages with correct device name.

As for this, this patch adds device pointer to exynos_drm_ipp structure,
and in case of exynos_drm_ipp_task structure, replace drm_device pointer
with device one. This will make each ipp driver to print out debug
messages with correct device name.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Add device pointer to vidi_context and remove platform_device pointer.

It doesn't need for vidi_context to contain platform_device object.
Instead, this patch makes this driver more simply by replacing platform_device
pointer with device one.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Use DRM_DEV_DEBUG* instead of DRM_DEBUG macro to print out
debug messages.

This patch just cleans up the use of debug log macro, which changes
the log macro to DRM_DEV_DEBUG*.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch just cleans up the use of error log macro, which changes
the log macro to DRM_DEV_ERROR.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch removes unnecessary messages from fimd_clear_channels
and decon_clear_channels functions which print out just function
name.
Signed-off-by: Inki Dae <inki.dae@samsung.com>