refill_one() should never be called on a recv struct that
doesn't need a new r_frag allocated. Add a WARN and remove
conditional around r_frag alloc code.

Also, add a comment to explain why r_ibinc may or may not
need refilling.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Instead of splitting up a page into RDS_FRAG_SIZE chunks
ourselves, ask rds_page_remainder_alloc() to do it. While it
is possible PAGE_SIZE > FRAG_SIZE, on x86en it isn't, so having
duplicate "carve up a page into buffers" code seems excessive.

The other modification this spawns is the use of a single
struct scatterlist in rds_page_frag instead of a bare page ptr.
This causes verbosity to increase in some places, and decrease
in others.

Finally, I decided to unify the lifetimes and alloc/free of
rds_page_frag and its page. This is a nice simplification in itself,
but will be extra-nice once we come to adding cmason's recycling
patch.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Currently IB device removal destroys connections which are associated with the
device.  This prevents connections from being re-established when replacement
devices are added.

Instead we'll queue shutdown work on the connections as their devices are
removed.  When we see that devices are added we triger connection attempts on
all connections that don't currently have a device.

The result is that RDS sockets can resume device-independent work (bcopy, not
RDMA) across IB device removal and restoration.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

A few paths had the same block of code to queue a connection's connect work if
it was in the right state.  Let's move this in to a helper function.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

The RDS IB client .remove callback used to free the rds_ibdev for the given
device unconditionally.  This could race other users of the struct.  This patch
adds refcounting so that we only free the rds_ibdev once all of its users are
done.

Many rds_ibdev users are tied to connections.  We give the connection a
reference and change these users to reference the device in the connection
instead of looking it up in the IB client data.  The only user of the IB client
data remaining is the first lookup of the device as connections are built up.

Incrementing the reference count of a device found in the IB client data could
race with final freeing so we use an RCU grace period to make sure that freeing
won't happen until those lookups are done.

MRs need the rds_ibdev to get at the pool that they're freed in to.  They exist
outside a connection and many MRs can reference different devices from one
socket, so it was natural to have each MR hold a reference.  MR refs can be
dropped from interrupt handlers and final device teardown can block so we push
it off to a work struct.  Pool teardown had to be fixed to cancel its pending
work instead of deadlocking waiting for all queued work, including itself, to
finish.

MRs get their reference from the global device list, which gets a reference.
It is left unprotected by locks and remains racy.  A simple global lock would
be a significant bottleneck.  More scalable (complicated) locking should be
done carefully in a later patch.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

rds_ib_xmit_rdma() was calling ib_get_client_data() to get at the rds_ibdevice
just to get the max_sge for the transmit.  This patch instead has it get it
directly off the rds_ibdev which is stored on the connection.

The current code won't free the rds_ibdev until all the IB connections that use
it are freed.  So it's safe to reference the rds_ibdev this way.  In the future
it also makes it easier to support proper reference counting of the rds_ibdev
struct.

As an additional bonus, this gets rid of the performance hit of calling in to
the IB stack to look up the rds_ibdev.  The current implementation in the IB
stack acquires an interrupt blocking spinlock to protect the registration of
client callback data.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

rds_ib_cm_handle_connect() could return without unlocking the c_conn_lock if
rds_setup_qp() failed.  Rather than adding another imbalanced mutex_unlock() to
this error path we only unlock the mutex once as we exit the function, reducing
the likelyhood of making this same mistake in the future.  We remove the
previous mulitple return sites, leaving one unambigious return path.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

This makes sure we have the proper number of references in
rds_ib_xmit_atomic and rds_ib_xmit_rdma.  We also consistently
drop references the same way for all message types as the IOs end.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The connection hash was almost entirely RCU ready, this
just makes the final couple of changes to use RCU instead
of spinlocks for everything.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

rds_conn_destroy really needs locking while it changes the
connection hash.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The RDS send_xmit code was trying to get fancy with message
counting and was dropping the final reference on the RDMA messages
too early.  This resulted in memory corruption and oopsen.

The fix here is to always add a ref as the parts of the message passes
through rds_send_xmit, and always drop a ref as the parts of the message
go through completion handling.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This is the first in a long line of patches that tries to fix races
between RDS connection shutdown and RDS traffic.

Here we are maintaining a count of active senders to make sure
the connection doesn't go away while they are using it.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The RDS bind lookups are somewhat expensive in terms of CPU
time and locking overhead.  This commit changes them into a
faster RCU based hash tree instead of the rbtrees they were using
before.

On large NUMA systems it is a significant improvement.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Allocate send/recv rings in memory that is node-local to the HCA.
This significantly helps performance.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Signed-off-by: Andy Grover <andy.grover@oracle.com>

rds_ib_get_device is called very often as we turn an
ip address into a corresponding device structure.  It currently
take a global spinlock as it walks different lists to find active
devices.

This commit changes the lists over to RCU, which isn't very complex
because they are not updated very often at all.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This removes a global waitqueue used to wait for rds messages
and replaces it with a waitqueue inside the rds_message struct.

The global waitqueue turns into a global lock and significantly
bottlenecks operations on large machines.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The bind_lock is almost entirely readonly, but it gets
hammered during normal operations and is a major bottleneck.

This commit changes it to an rwlock, which takes it from 80%
of the system time on a big numa machine down to much lower
numbers.

A better fix would involve RCU, which is done in a later commit
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Update comments to reflect changes in previous commit.

Keeping as separate commits due to different authorship.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

rds_send_xmit is required to loop around after it releases the lock
because someone else could done a trylock, found someone working on the
list and backed off.

But, once we drop our lock, it is possible that someone else does come
in and make progress on the list.  We should detect this and not loop
around if another process is actually working on the list.

This patch adds a generation counter that is bumped every time we
get the lock and do some send work.  If the retry notices someone else
has bumped the generation counter, it does not need to loop around and
continue working.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Call send_xmit() directly from pong()

Set pongs as op_active
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Can't see a reason not to allow signals to interrupt the wait.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

The purpose of the send quota was really to give fairness
when different connections were all using the same
workq thread to send backlogged msgs -- they could only send
so many before another connection could make progress.

Now that each connection is pushing the backlog from its
completion handler, they are all guaranteed to make progress
and the quota isn't needed any longer.

A thread *will* have to send all previously queued data, as well
as any further msgs placed on the queue while while c_send_lock
was held. In a pathological case a single process can get
roped into doing this for long periods while other threads
get off free. But, since it can only do this until the transport
reports full, this is a bounded scenario.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Signed-off-by: Andy Grover <andy.grover@oracle.com>

If the queue has nobody on it, then wake_up does nothing.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Do not nest m_rs_lock under c_lock

Disable interrupts in {rdma,atomic}_send_complete
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Can no longer block, so use NOWAIT.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Now that rds_send_xmit() does not block, we can call it directly
instead of going through the helper thread.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

rds_sendmsg() is calling the send worker function to
send the just-queued datagrams, presumably because it wants
the behavior where anything not sent will re-call the send
worker. We now ensure all queued datagrams are sent by retrying
from the send completion handler, so this isn't needed any more.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

rds_message_put() cannot be called with irqs off, so move it after
irqs are re-enabled.

Spinlocks throughout the function do not to use _irqsave because
the lock of c_send_lock at top already disabled irqs.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

This change allows us to call rds_send_xmit() from a tasklet,
which is crucial to our new operating model.

* Change c_send_lock to a spinlock
* Update stats fields "sem_" to "_lock"
* Remove unneeded rds_conn_is_sending()

About locking between shutdown and send -- send checks if the
connection is up. Shutdown puts the connection into
DISCONNECTING. After this, all threads entering send will exit
immediately. However, a thread could be *in* send_xmit(), so
shutdown acquires the c_send_lock to ensure everyone is out
before proceeding with connection shutdown.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Performance is better if we use allocations that don't block
to refill the receive ring. Since the whole reason we were
kicking out to the worker thread was so we could do blocking
allocs, we no longer need to do this.

Remove gfp params from rds_ib_recv_refill(); we always use
GFP_NOWAIT.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

We now ask the transport to give us a rm for the congestion
map, and then we handle it normally. Previously, the
transport defined a function that we would call to send
a congestion map.

Convert TCP and loop transports to new cong map method.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Now that we are signaling send completions much less, we are likely
to have dirty entries in the send queue when the connection is
shut down (on rmmod, for example.) These are cleaned up a little
further down in conn_shutdown, but if we wait on the ring_empty_wait
for them, it'll never happen, and we hand on unload.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Previously, RDS would wait until the final send WR had completed
and then handle cleanup. With silent ops, we do not know
if an atomic, rdma, or data op will be last. This patch
handles any of these cases by keeping a pointer to the last
op in the message in m_last_op.

When the TX completion event fires, rds dispatches to per-op-type
cleanup functions, and then does whole-message cleanup, if the
last op equalled m_last_op.

This patch also moves towards having op-specific functions take
the op struct, instead of the overall rm struct.

rds_ib_connection has a pointer to keep track of a a partially-
completed data send operation. This patch changes it from an
rds_message pointer to the narrower rm_data_op pointer, and
modifies places that use this pointer as needed.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

It hasn't cropped up in the field, but this code ensures it is
impossible to issue operations that pass an rdma cookie (DEST, MAP)
in the same sendmsg call that's actually initiating rdma or atomic
ops.

Disallowing this perverse-but-technically-allowed usage makes silent
RDMA heuristics slightly easier.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Add a flag to the API so users can indicate they want
silent operations. This is needed because silent ops
cannot be used with USE_ONCE MRs, so we can't just
assume silent.

Also, change send_xmit to do atomic op before rdma op if
both are present, and centralize the hairy logic to determine if
we want to attempt silent, or not.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Also, add a comment.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

When dropping ops in the send queue, we notify the client
of failed rdma ops they asked for notifications on, but not
atomic ops. It should be for both.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

rds_message_alloc_sgs() only works when nents is nonzero.
Signed-off-by: Andy Grover <andy.grover@oracle.com>