- 03 Aug, 2018 40 commits
-
-
Chris Novakovic authored
[ Upstream commit 300eec7c ] ic_nameservers, which stores the list of name servers discovered by ipconfig, is initialised (i.e. has all of its elements set to NONE, or 0xffffffff) by ic_nameservers_predef() in the following scenarios: - before the "ip=" and "nfsaddrs=" kernel command line parameters are parsed (in ip_auto_config_setup()); - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in order to clear any values that may have been set after parsing "ip=" or "nfsaddrs=" and are no longer needed. This means that ic_nameservers_predef() is not called when neither "ip=" nor "nfsaddrs=" is specified on the kernel command line. In this scenario, every element in ic_nameservers remains set to 0x00000000, which is indistinguishable from ANY and causes pnp_seq_show() to write the following (bogus) information to /proc/net/pnp: #MANUAL nameserver 0.0.0.0 nameserver 0.0.0.0 nameserver 0.0.0.0 This is potentially problematic for systems that blindly link /etc/resolv.conf to /proc/net/pnp. Ensure that ic_nameservers is also initialised when neither "ip=" nor "nfsaddrs=" are specified by calling ic_nameservers_predef() in ip_auto_config(), but only when ip_auto_config_setup() was not called earlier. This causes the following to be written to /proc/net/pnp, and is consistent with what gets written when ipconfig is configured manually but no name servers are specified on the kernel command line: #MANUAL Signed-off-by:
Chris Novakovic <chris@chrisn.me.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luc Van Oostenryck authored
[ Upstream commit 2ea00909 ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it. Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid(). Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.comSigned-off-by:
-
Enric Balletbo i Serra authored
[ Upstream commit 7c8b77f8 ] Heiko Stübner justified pretty well the change in commit e330eb86 ("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This change is also needed for arm64 rockchip boards, so, do the same for arm64. The io-domain driver is necessary to notify the soc about voltages changes happening on supplying regulators. Probably the most important user right now is the mmc tuning code, where the soc needs to get notified when the voltage is dropped to the 1.8V point. As this option is necessary to successfully tune UHS cards etc, it should get built in. Otherwise, tuning will fail with, dwmmc_rockchip fe320000.dwmmc: All phases bad! mmc0: tuning execution failed: -5 Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 1c74d5c0 ] Currently we are enabling handling of interrupts specific to Tegra124+ which happen to overlap with previous generations. Let's specify interrupts mask per SoC generation for consistency and in a preparation of squashing of Tegra20 driver into the common one that will enable handling of GART faults which may be undesirable by newer generations. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit bf3fbdfb ] The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the mask to the interrupt status and don't handle interrupts that MC driver haven't asked for. Kernel would disable spurious MC IRQ and report the error. This would happen only in a case of a very severe bug. Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit de5b55c1 ] Use raw-locks in stop_machine() to allow locking in irq-off and preempt-disabled regions on -RT. This also documents the possible locking context in general. [bigeasy: update patch description.] Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/20180423191635.6014-1-bigeasy@linutronix.deSigned-off-by:
-
Yixun Lan authored
[ Upstream commit 7e5d05e1 ] We need to introduce a new compatible name for the Meson-AXG SoC in order to support the RMII 100M ethernet PHY, since the PRG_ETH0 register of the dwmac glue layer is changed from previous old SoC. Signed-off-by:
Yixun Lan <yixun.lan@amlogic.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 03d9fbc3 ] The Meson8m2 SoC is a variant of Meson8 with some updates from Meson8b (such as the Gigabit capable DesignWare MAC). It is mostly pin compatible with Meson8, only 10 (existing) CBUS pins get an additional function (four of these are Ethernet RXD2, RXD3, TXD2 and TXD3 which are required when the board uses an RGMII PHY). The AOBUS pins seem to be identical on Meson8 and Meson8m2. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Tobin C. Harding authored
[ Upstream commit 486e6661 ] The use of stack Variable Length Arrays needs to be avoided, as they can be a vector for stack exhaustion, which can be both a runtime bug (kernel Oops) or a security flaw (overwriting memory beyond the stack). Also, in general, as code evolves it is easy to lose track of how big a VLA can get. Thus, we can end up having runtime failures that are hard to debug. As part of the directive[1] to remove all VLAs from the kernel, and build with -Wvla. Currently driver is using a VLA declared using the number of descriptors. This array is used to store integer values and is later used as an argument to `gpiod_set_array_value_cansleep()` This can be avoided by using `kmalloc_array()` to allocate memory for the array of integer values. Memory is free'd before return from function. >From the code it appears that it is safe to sleep so we can use GFP_KERNEL (based _cansleep() suffix of function `gpiod_set_array_value_cansleep()`. It can be expected that this patch will result in a small increase in overhead due to the use of `kmalloc_array()` [1] https://lkml.org/lkml/2018/3/7/621Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Shawn Lin authored
[ Upstream commit ff178981 ] Respect the actual clock for mmc debugfs to help better debug the hardware. mmc_host mmc0: Bus speed (slot 0) = 135475200Hz (slot req 150000000Hz, actual 135475200HZ div = 0) cat /sys/kernel/debug/mmc0/ios clock: 150000000 Hz actual clock: 135475200 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 3 (8 bits) timing spec: 9 (mmc HS200) signal voltage: 0 (1.80 V) driver type: 0 (driver type B) Cc: Xiao Yao <xiaoyao@rock-chips.com> Cc: Ziyuan <xzy.xu@rock-chips.com> Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Takashi Sakamoto authored
[ Upstream commit 8e142e9e ] DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but tlv.h is not included. This causes build failure when local macro is defined by comment-out. This commit fixes the bug. At the same time, the alias macro is replaced with a destination macro added at a commit 46e860f7 ("ALSA: rename TLV-related macros so that they're friendly to user applications") Reported-by:
Connor McAdams <conmanx360@gmail.com> Fixes: 44f0c978 ('ALSA: hda/ca0132: Add tuning controls') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Satendra Singh Thakur authored
[ Upstream commit fc2a69f3 ] In the func drm_atomic_set_crtc_for_plane, with the current code, if crtc of the plane_state and crtc passed as argument to the func are same, entire func will executed in vein. It will get state of crtc and clear and set the bits in plane_mask. All these steps are not required for same old crtc. Ideally, we should do nothing in this case, this patch handles the same, and causes the program to return without doing anything in such scenario. Signed-off-by:
Satendra Singh Thakur <satendra.t@samsung.com> Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
[ Upstream commit e1b7f11b ] Those are all false-positives that appear with smatch when building for arm: drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16 Get rid of them by adding explicit forced casts. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit ab7f5bf0 ] Comments in the verifier refer to free_bpf_prog_info() which seems to have never existed in tree. Replace it with free_used_maps(). Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
[ Upstream commit 8bfc218d ] Add missing clearing of the previous value when setting rising temperature threshold. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Doug Oucahrek authored
[ Upstream commit cf04968e ] cmid will be destroyed at OFED if kiblnd_cm_callback return error. if error happen before the end of kiblnd_connect_peer, it will touch destroyed cmid and fail as (o2iblnd_cb.c:1315:kiblnd_connect_peer()) ASSERTION( cmid->device != ((void *)0) ) failed: Signed-off-by:
Alexander Boyko <alexander.boyko@seagate.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10015Reviewed-by:
Alexey Lyashkov <c17817@cray.com> Reviewed-by:
Doug Oucharek <dougso@me.com> Reviewed-by:
John L. Hammond <john.hammond@intel.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 27e833da ] If we had more than 32 megaraid cards then it would cause memory corruption. That's not likely, of course, but it's handy to enforce it and make the static checker happy. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 9899e4d3 ] In tw_chrdev_ioctl(), the length of the data buffer is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'data_buffer_length'. Then a security check is performed on it to make sure that the length is not more than 'TW_MAX_IOCTL_SECTORS * 512'. Otherwise, an error code -EINVAL is returned. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer length between the two copies. This way, the user can bypass the security check and inject invalid data buffer length. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in tw_chrdev_open() to avoid the above issues. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit c9318a3e ] In twa_chrdev_ioctl(), the ioctl driver command is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'driver_command'. Then a security check is performed on the data buffer size indicated by 'driver_command', which is 'driver_command.buffer_length'. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer size between the two copies. This way, the user can bypass the security check and inject invalid data buffer size. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in twa_chrdev_open()t o avoid the above issues. Signed-off-by:
-
Michael Chan authored
[ Upstream commit dac04907 ] Only non-NPAR PFs need to actively check and manage unsupported link speeds. NPAR functions and VFs do not control the link speed and should skip the unsupported speed detection logic, to avoid warning messages from firmware rejecting the unsupported firmware calls. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 3c0a83b1 ] The s390 CPU measurement facility sampling mode supports basic entries and diagnostic entries. Each entry has a valid bit to indicate the status of the entry as valid or invalid. This bit is bit 31 in the diagnostic entry, but the bit mask definition refers to bit 30. Fix this by making the reserved field one bit larger. Fixes: 7e75fc3f ("s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function") Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 77715b7d ] The CPU Measurement sampling facility creates a trailer entry for each Sample-Data-Block of stored samples. The trailer entry contains the sizes (in bytes) of the stored sampling types: - basic-sampling data entry size - diagnostic-sampling data entry size Both sizes are 2 bytes long. This patch changes the trailer entry definition to reflect this. Fixes: fcc77f50 ("s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks") Signed-off-by:
-
Sean Lanigan authored
[ Upstream commit 9c4a121e ] Add support for the BCM43364 chipset via an SDIO interface, as used in e.g. the Murata 1FX module. The BCM43364 uses the same firmware as the BCM43430 (which is already included), the only difference is the omission of Bluetooth. However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place triggers the brcmfmac driver to load, and then correctly use the firmware file 'brcmfmac43430-sdio.bin'. Signed-off-by:
Sean Lanigan <sean@lano.id.au> Acked-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Jane Wan authored
[ Upstream commit a75bbe71 ] Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page read is not valid, the host should read redundant parameter page copies. Fix FSL NAND driver to read the two redundant copies which are mandatory in the specification. Signed-off-by:
Jane Wan <Jane.Wan@nokia.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Brad Love authored
[ Upstream commit 0cc4655c ] This issue was reported by a user who downloaded a corrupt saa7164 firmware, then went looking for a valid xc5000 firmware to fix the error displayed...but the device in question has no xc5000, thus after much effort, the wild goose chase eventually led to a support call. The xc5000 has nothing to do with saa7164 (as far as I can tell), so replace the string with saa7164 as well as give a meaningful hint on the firmware mismatch. Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sami Tolvanen authored
[ Upstream commit daa36370 ] This change fixes function types for media device ioctls to avoid indirect call mismatches with Control-Flow Integrity checking. Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Damien Le Moal authored
[ Upstream commit 804689ad ] For failed commands with valid sense data (e.g. NCQ commands), scsi_check_sense() is used in ata_analyze_tf() to determine if the command can be retried. In such case, rely on this decision and ignore the command error mask based decision done in ata_worth_retry(). This fixes useless retries of commands such as unaligned writes on zoned disks (TYPE_ZAC). Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 43d0d3c5 ] Add the missing clk_disable_unprepare() before return from jpu_open() in the software reset error handling case. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 8a22a3e1 ] Inclusion of include/dma-iommu.h when CONFIG_IOMMU_DMA is not selected results in the following splat: In file included from drivers/irqchip/irq-gic-v3-mbi.c:20:0: ./include/linux/dma-iommu.h:95:69: error: unknown type name ‘dma_addr_t’ static inline int iommu_get_msi_cookie(struct iommu_domain *domain, dma_addr_t base) ^~~~~~~~~~ ./include/linux/dma-iommu.h:108:74: warning: ‘struct list_head’ declared inside parameter list will not be visible outside of this definition or declaration static inline void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list) ^~~~~~~~~ scripts/Makefile.build:312: recipe for target 'drivers/irqchip/irq-gic-v3-mbi.o' failed Fix it by including linux/types.h. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
DaeRyong Jeong authored
[ Upstream commit b6da31b2 ] Unlike normal serials, in pty layer, there is no guarantee that multiple threads don't insert input characters at the same time. If it is happened, tty_insert_flip_string_fixed_flag can be executed concurrently. This can lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag. Call sequences are as follows. CPU0 CPU1 n_tty_ioctl_helper n_tty_ioctl_helper __start_tty tty_send_xchar tty_wakeup pty_write n_hdlc_tty_wakeup tty_insert_flip_string n_hdlc_send_frames tty_insert_flip_string_fixed_flag pty_write tty_insert_flip_string tty_insert_flip_string_fixed_flag To fix the race, acquire port->lock in pty_write() before it inserts input characters to tty buffer. It prevents multiple threads from inserting input characters concurrently. The crash log is as follows: BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/ 0x130 drivers/tty/tty_buffer.c:316 at addr ffff880114fcc121 Write of size 1792 by task syz-executor0/30017 CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140 ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0 ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xb3/0x110 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 print_address_description mm/kasan/report.c:194 [inline] kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283 kasan_report+0x36/0x40 mm/kasan/report.c:303 check_memory_region_inline mm/kasan/kasan.c:292 [inline] check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299 memcpy+0x37/0x50 mm/kasan/kasan.c:335 tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316 tty_insert_flip_string include/linux/tty_flip.h:35 [inline] pty_write+0x7f/0xc0 drivers/tty/pty.c:115 n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419 n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496 tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601 __start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018 __start_tty+0x34/0x40 drivers/tty/tty_io.c:1013 n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138 n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794 tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679 SYSC_ioctl fs/ioctl.c:694 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 entry_SYSCALL_64_fastpath+0x1f/0xbd Signed-off-by:
DaeRyong Jeong <threeearcat@gmail.com> Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit 50808bfc ] Function nvmem_reg_read can return a non zero value indicating an error. This returned value must be read and error propagated to nvmem_cell_prepare_write_buffer. Silence the following gcc warning (W=1): drivers/nvmem/core.c:1093:9: warning: variable 'rc' set but not used [-Wunused-but-set-variable] Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 57a66497 ] The PMU node references two interrupts, but lacks the interrupt-affinity property, which is required in that case: hw perfevents: no interrupt-affinity property for /pmu, guessing. Add the missing property to fix this. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 7207b947 ] The PMU node references two interrupts, but lacks the interrupt-affinity property, which is required in that case: hw perfevents: no interrupt-affinity property for /pmu, guessing. Add the missing property to fix this. Signed-off-by:
-
Thor Thayer authored
[ Upstream commit 9ef20753 ] The kbuild test robot reported the following warning: drivers/edac/altera_edac.c: In function 'ocram_free_mem': drivers/edac/altera_edac.c:1410:42: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] gen_pool_free((struct gen_pool *)other, (u32)p, size); ^ After adding support for ARM64 architectures, the unsigned long parameter is 64 bits and causes a build warning on 64-bit configs. Fix by casting to the correct size (unsigned long) instead of u32. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thor Thayer <thor.thayer@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: c3eea194 ("EDAC, altera: Add Altera L2 cache and OCRAM support") Link: http://lkml.kernel.org/r/1526317441-4996-1-git-send-email-thor.thayer@linux.intel.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit b3a81b6c ] On many Chromebooks touch devices are multi-sourced; the components are electrically compatible and one can be freely swapped for another without changing the OS image or firmware. To avoid bunch of scary messages when device is not actually present in the system let's try testing basic communication with it and if there is no response terminate probe early with -ENXIO. Signed-off-by:
Dmitry Torokhov <dtor@chromium.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jonathan Neuschäfer authored
[ Upstream commit 9dcb3df4 ] The interrupt controller inside the Wii's Hollywood chip is connected to two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with their own interrupt status and mask registers. When booting the Wii with mini[1], interrupts from the SD card controller (IRQ 7) are handled by the ARM, because mini provides SD access over IPC. Linux however can't currently use or disable this IPC service, so both sides try to handle IRQ 7 without coordination. Let's instead make sure that all interrupts that are unmasked on the PPC side are masked on the ARM side; this will also make sure that Linux can properly talk to the SD card controller (and potentially other devices). If access to a device through IPC is desired in the future, interrupts from that device should not be handled by Linux directly. [1]: https://github.com/lewurm/miniSigned-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Luc Van Oostenryck authored
[ Upstream commit 7a47f20e ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Terry Junge authored
[ Upstream commit 37e376df ] Add a mapping for Push-To-Talk joystick trigger button. Tested on ChromeBox/ChromeBook with various Plantronics devices. Signed-off-by:
Terry Junge <terry.junge@plantronics.com> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 1cfc63b5 ] When waiting for a cacheline to change state in cmpwait, we may immediately wake-up the first time around the outer loop if the event register was already set (for example, because of the event stream). Avoid these spurious wakeups by explicitly clearing the event register before loading the cacheline and setting the exclusive monitor. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 377a879d ] retire_capture_urb() may print warning messages when the given URB doesn't align, and this may flood the system log easily. Put the rate limit to the message for avoiding it. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1093485Signed-off-by:
-
