Skip to content

L
linux
Switch branch/tag
  1. 16 Jan, 2015 35 commits
  3. 08 Jan, 2015 5 commits
    • Greg Kroah-Hartman's avatar
      Linux 3.10.64 · 46a490cc
      Greg Kroah-Hartman authored
      46a490cc
    • Filipe Manana's avatar
      Btrfs: fix fs corruption on transaction abort if device supports discard · 5f55aee3
      Filipe Manana authored 
      commit 678886bd upstream.

When we abort a transaction we iterate over all the ranges marked as dirty
in fs_info->freed_extents[0] and fs_info->freed_extents[1], clear them
from those trees, add them back (unpin) to the free space caches and, if
the fs was mounted with "-o discard", perform a discard on those regions.
Also, after adding the regions to the free space caches, a fitrim ioctl call
can see those ranges in a block group's free space cache and perform a discard
on the ranges, so the same issue can happen without "-o discard" as well.

This causes corruption, affecting one or multiple btree nodes (in the worst
case leaving the fs unmountable) because some of those ranges (the ones in
the fs_info->pinned_extents tree) correspond to btree nodes/leafs that are
referred by the last committed super block - breaking the rule that anything
that was committed by a transaction is untouched until the next transaction
commits successfully.

I ran into this while running in a loop (for several hours) the fstest that
I recently submitted:

  [PATCH] fstests: add btrfs test to stress chunk allocation/removal and fstrim

The corruption always happened when a transaction aborted and then fsck complained
like this:

   _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent
   *** fsck.btrfs output ***
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   read block failed check_tree_block
   Couldn't open file system

In this case 94945280 corresponded to the root of a tree.
Using frace what I observed was the following sequence of steps happened:

   1) transaction N started, fs_info->pinned_extents pointed to
      fs_info->freed_extents[0];

   2) node/eb 94945280 is created;

   3) eb is persisted to disk;

   4) transaction N commit starts, fs_info->pinned_extents now points to
      fs_info->freed_extents[1], and transaction N completes;

   5) transaction N + 1 starts;

   6) eb is COWed, and btrfs_free_tree_block() called for this eb;

   7) eb range (94945280 to 94945280 + 16Kb) is added to
      fs_info->pinned_extents (fs_info->freed_extents[1]);

   8) Something goes wrong in transaction N + 1, like hitting ENOSPC
      for example, and the transaction is aborted, turning the fs into
      readonly mode. The stack trace I got for example:

      [112065.253935]  [<ffffffff8140c7b6>] dump_stack+0x4d/0x66
      [112065.254271]  [<ffffffff81042984>] warn_slowpath_common+0x7f/0x98
      [112065.254567]  [<ffffffffa0325990>] ? __btrfs_abort_transaction+0x50/0x10b [btrfs]
      [112065.261674]  [<ffffffff810429e5>] warn_slowpath_fmt+0x48/0x50
      [112065.261922]  [<ffffffffa032949e>] ? btrfs_free_path+0x26/0x29 [btrfs]
      [112065.262211]  [<ffffffffa0325990>] __btrfs_abort_transaction+0x50/0x10b [btrfs]
      [112065.262545]  [<ffffffffa036b1d6>] btrfs_remove_chunk+0x537/0x58b [btrfs]
      [112065.262771]  [<ffffffffa033840f>] btrfs_delete_unused_bgs+0x1de/0x21b [btrfs]
      [112065.263105]  [<ffffffffa0343106>] cleaner_kthread+0x100/0x12f [btrfs]
      (...)
      [112065.264493] ---[ end trace dd7903a975a31a08 ]---
      [112065.264673] BTRFS: error (device sdc) in btrfs_remove_chunk:2625: errno=-28 No space left
      [112065.264997] BTRFS info (device sdc): forced readonly

   9) The clear kthread sees that the BTRFS_FS_STATE_ERROR bit is set in
      fs_info->fs_state and calls btrfs_cleanup_transaction(), which in
      turn calls btrfs_destroy_pinned_extent();

   10) Then btrfs_destroy_pinned_extent() iterates over all the ranges
       marked as dirty in fs_info->freed_extents[], and for each one
       it calls discard, if the fs was mounted with "-o discard", and
       adds the range to the free space cache of the respective block
       group;

   11) btrfs_trim_block_group(), invoked from the fitrim ioctl code path,
       sees the free space entries and performs a discard;

   12) After an umount and mount (or fsck), our eb's location on disk was full
       of zeroes, and it should have been untouched, because it was marked as
       dirty in the fs_info->pinned_extents tree, and therefore used by the
       trees that the last committed superblock points to.

Fix this by not performing a discard and not adding the ranges to the free space
caches - it's useless from this point since the fs is now in readonly mode and
we won't write free space caches to disk anymore (otherwise we would leak space)
nor any new superblock. By not adding the ranges to the free space caches, it
prevents other code paths from allocating that space and write to it as well,
therefore being safer and simpler.

This isn't a new problem, as it's been present since 2011 (git commit
acce952b).
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarChris Mason <clm@fb.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5f55aee3
    • Josef Bacik's avatar
      Btrfs: do not move em to modified list when unpinning · d8bf9ec7
      Josef Bacik authored 
      commit a2804695 upstream.

We use the modified list to keep track of which extents have been modified so we
know which ones are candidates for logging at fsync() time.  Newly modified
extents are added to the list at modification time, around the same time the
ordered extent is created.  We do this so that we don't have to wait for ordered
extents to complete before we know what we need to log.  The problem is when
something like this happens

log extent 0-4k on inode 1
copy csum for 0-4k from ordered extent into log
sync log
commit transaction
log some other extent on inode 1
ordered extent for 0-4k completes and adds itself onto modified list again
log changed extents
see ordered extent for 0-4k has already been logged
	at this point we assume the csum has been copied
sync log
crash

On replay we will see the extent 0-4k in the log, drop the original 0-4k extent
which is the same one that we are replaying which also drops the csum, and then
we won't find the csum in the log for that bytenr.  This of course causes us to
have errors about not having csums for certain ranges of our inode.  So remove
the modified list manipulation in unpin_extent_cache, any modified extents
should have been added well before now, and we don't want them re-logged.  This
fixes my test that I could reliably reproduce this problem with.  Thanks,
Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
Signed-off-by: default avatarChris Mason <clm@fb.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d8bf9ec7
    • Michael Halcrow's avatar
      eCryptfs: Remove buggy and unnecessary write in file name decode routine · 66012982
      Michael Halcrow authored 
      commit 94208064 upstream.

Dmitry Chernenkov used KASAN to discover that eCryptfs writes past the
end of the allocated buffer during encrypted filename decoding. This
fix corrects the issue by getting rid of the unnecessary 0 write when
the current bit offset is 2.
Signed-off-by: default avatarMichael Halcrow <mhalcrow@google.com>
Reported-by: default avatarDmitry Chernenkov <dmitryc@google.com>
Suggested-by: default avatarKees Cook <keescook@chromium.org>
Signed-off-by: default avatarTyler Hicks <tyhicks@canonical.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      66012982
    • Tyler Hicks's avatar
      eCryptfs: Force RO mount when encrypted view is enabled · ed775f31
      Tyler Hicks authored 
      commit 332b122d upstream.

The ecryptfs_encrypted_view mount option greatly changes the
functionality of an eCryptfs mount. Instead of encrypting and decrypting
lower files, it provides a unified view of the encrypted files in the
lower filesystem. The presence of the ecryptfs_encrypted_view mount
option is intended to force a read-only mount and modifying files is not
supported when the feature is in use. See the following commit for more
information:

  e77a56dd [PATCH] eCryptfs: Encrypted passthrough

This patch forces the mount to be read-only when the
ecryptfs_encrypted_view mount option is specified by setting the
MS_RDONLY flag on the superblock. Additionally, this patch removes some
broken logic in ecryptfs_open() that attempted to prevent modifications
of files when the encrypted view feature was in use. The check in
ecryptfs_open() was not sufficient to prevent file modifications using
system calls that do not operate on a file descriptor.
Signed-off-by: default avatarTyler Hicks <tyhicks@canonical.com>
Reported-by: default avatarPriya Bansal <p.bansal@samsung.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ed775f31
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7