- 01 Feb, 2021 17 commits
-
-
Yong Wu authored
In pm runtime case, all the registers backup/restore and bclk are controlled in the pm_runtime callback, Rename the original suspend/resume to the runtime_suspend/resume. Use pm_runtime_force_suspend/resume as the normal suspend/resume. iommu should suspend after iommu consumer devices, thus use _LATE_. Signed-off-by:
Yong Wu <yong.wu@mediatek.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-20-yong.wu@mediatek.comSigned-off-by:
Will Deacon <will@kernel.org>
-
Yong Wu authored
In the lastest SoC, M4U has its special power domain. thus, If the engine begin to work, it should help enable the power for M4U firstly. Currently if the engine work, it always enable the power/clocks for smi-larbs/smi-common. This patch adds device_link for smi-common and M4U. then, if smi-common power is enabled, the M4U power also is powered on automatically. Normally M4U connect with several smi-larbs and their smi-common always are the same, In this patch it get smi-common dev from the last smi-larb device, then add the device_link. Signed-off-by:
-
Yong Wu authored
In the original code, we lack the error handle. This patch adds them. Signed-off-by:
-
Yong Wu authored
In attach device, it will update the pagetable base address register. Move the hw_init function also here. Then it only need call pm_runtime_get/put one time here if m4u has power domain. Signed-off-by:
-
Yong Wu authored
This patch only updates oas in different SoCs. If the SoC supports 4GB-mode and current dram size is 4GB, the oas is 33. otherwise, it's still 32. In the lastest SoC, the oas is 35bits. Signed-off-by:
-
Yong Wu authored
Add a HW flag for if the HW support 34bit IOVA. the previous SoC still use 32bit. normally the lvl1 pgtable size is 16KB when ias == 32. if ias == 34, lvl1 pgtable size is 16KB * 4. The purpose of this patch is to save 16KB*3 continuous memory for the previous SoC. Signed-off-by:
-
Yong Wu authored
The standard input iova bits is 32. MediaTek quad the lvl1 pagetable (4 * lvl1). No change for lvl2 pagetable. Then the iova bits can reach 34bit. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
-
Yong Wu authored
Add "cfg" as a parameter for some macros. This is a preparing patch for mediatek extend the lvl1 pgtable. No functional change. Signed-off-by:
-
Yong Wu authored
The current _ARM_V7S_LVL_BITS/ARM_V7S_LVL_SHIFT use a formula to calculate the corresponding value for level1 and level2 to pretend the code sane. Actually their level1 and level2 values are different from each other. This patch only clarify the two macro. No functional change. Suggested-by:
-
Yong Wu authored
MediaTek extend the bit5 in lvl1 and lvl2 descriptor as PA34. Signed-off-by:
-
Yong Wu authored
Use the ias for the valid iova checking in arm_v7s_unmap. This is a preparing patch for supporting iova 34bit for MediaTek. Signed-off-by:
-
Yong Wu authored
Use the common memory header(larb-port) in the source code. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
-
Yong Wu authored
This patch adds decriptions for mt8192 IOMMU and SMI. mt8192 also is MTK IOMMU gen2 which uses ARM Short-Descriptor translation table format. The M4U-SMI HW diagram is as below: EMI | M4U | ------------ SMI Common ------------ | +-------+------+------+----------------------+-------+ | | | | ...... | | | | | | | | larb0 larb1 larb2 larb4 ...... larb19 larb20 disp0 disp1 mdp vdec IPE IPE All the connections are HW fixed, SW can NOT adjust it. mt8192 M4U support 0~16GB iova range. we preassign different engines into different iova ranges: domain-id module iova-range larbs 0 disp 0 ~ 4G larb0/1 1 vcodec 4G ~ 8G larb4/5/7 2 cam/mdp 8G ~ 12G larb2/9/11/13/14/16/17/18/19/20 3 CCU0 0x4000_0000 ~ 0x43ff_ffff larb13: port 9/10 4 CCU1 0x4400_0000 ~ 0x47ff_ffff larb14: port 4/5 The iova range for CCU0/1(camera control unit) is HW requirement. Signed-off-by:Rob Herring <robh@kernel.org> Acked-by:
-
Yong Wu authored
Only rename the header guard for all the SoC larb port header file. No funtional change. Suggested-by:
-
Yong Wu authored
Extend the max larb number definition as mt8192 has larb_nr over 16. Signed-off-by:
-
Yong Wu authored
Put all the macros about smi larb/port togethers. Signed-off-by:
-
Yong Wu authored
Convert MediaTek IOMMU to DT schema. Signed-off-by:
-
- 28 Jan, 2021 2 commits
-
-
Robin Murphy authored
IO_PGTABLE_QUIRK_TLBI_ON_MAP is now fully superseded by the core API's iotlb_sync_map callback. Signed-off-by:
-
Robin Murphy authored
The core API can now accommodate invalidate-on-map style behaviour in a single efficient call, so hook that up instead of having io-pgatble do it piecemeal. Signed-off-by:
-
- 27 Jan, 2021 7 commits
-
-
Yong Wu authored
Until now, we have already used the tlb operations from iommu framework, then the tlb operations for v7s can be removed. Correspondingly, Switch the paramenter "cookie" to the internal structure. Signed-off-by:
-
Yong Wu authored
In current iommu_unmap, this code is: iommu_iotlb_gather_init(&iotlb_gather); ret = __iommu_unmap(domain, iova, size, &iotlb_gather); iommu_iotlb_sync(domain, &iotlb_gather); We could gather the whole iova range in __iommu_unmap, and then do tlb synchronization in the iommu_iotlb_sync. This patch implement this, Gather the range in mtk_iommu_unmap. then iommu_iotlb_sync call tlb synchronization for the gathered iova range. we don't call iommu_iotlb_gather_add_page since our tlb synchronization could be regardless of granule size. In this way, gather->start is impossible ULONG_MAX, remove the checking. This patch aims to do tlb synchronization *once* in the iommu_unmap. Signed-off-by:
-
Yong Wu authored
This patch allows io_pgtable_tlb ops could be null since the IOMMU drivers may use the tlb ops from iommu framework. Signed-off-by:
-
Yong Wu authored
Currently gather->end is "unsigned long" which may be overflow in arch32 in the corner case: 0xfff00000 + 0x100000(iova + size). Although it doesn't affect the size(end - start), it affects the checking "gather->end < end" This patch changes this "end" to the real end address (end = start + size - 1). Correspondingly, update the length to "end - start + 1". Fixes: a7d20dc1 ("iommu: Introduce struct iommu_iotlb_gather for batching TLB flushes") Signed-off-by:
-
Yong Wu authored
Remove IO_PGTABLE_QUIRK_TLBI_ON_MAP to avoid tlb sync for each a small chunk memory, Use the new iotlb_sync_map to tlb_sync once for whole the iova range of iommu_map. Signed-off-by:
-
Yong Wu authored
iotlb_sync_map allow IOMMU drivers tlb sync after completing the whole mapping. This patch adds iova and size as the parameters in it. then the IOMMU driver could flush tlb with the whole range once after iova mapping to improve performance. Signed-off-by:
-
Yong Wu authored
In the end of __iommu_map, It alway call iotlb_sync_map. This patch moves iotlb_sync_map out from __iommu_map since it is unnecessary to call this for each sg segment especially iotlb_sync_map is flush tlb all currently. Add a little helper _iommu_map for this. Signed-off-by:
-
- 27 Dec, 2020 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Since commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d..b24c30c6, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by:
Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Misc fixes/updates: - Fix static keys usage in module __init sections - Add separate MAINTAINERS entry for static branches/calls - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing" * tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: softirq: Avoid bad tracing / lockdep interaction jump_label/static_call: Add MAINTAINERS jump_label: Fix usage in module __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Update/fix two CPU sanity checks in the hotplug and the boot code, and fix a typo in the Kconfig help text. [ Context: the first two commits are the result of an ongoing annotation+review work of (intentional) tick_do_timer_cpu() data races reported by KCSAN, but the annotations aren't fully cooked yet ]" * tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill" tick/sched: Remove bogus boot "safety" check tick: Remove pointless cpu valid check in hotplug code -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a context switch performance regression" * tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Optimize finish_lock_switch()
-
- 26 Dec, 2020 5 commits
-
-
Linus Torvalds authored
Commit c9a3c4e6 ("mfd: ab8500-debugfs: Remove extraneous curly brace") removed a left-over curly brace that caused build failures, but Joe Perches points out that the subsequent 'seq_putc()' should also be removed, because the commit that caused all these problems already added the final '\n' to the seq_printf() above it. Reported-by:
Joe Perches <joe@perches.com> Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Fix a tegra enumeration regression (Rob Herring) - Fix a designware-host check that warned on *success*, not failure (Alexander Lobakin) * tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dwc: Fix inverted condition of DMA mask setup warning PCI: tegra: Fix host link initialization
-
Nathan Chancellor authored
Clang errors: drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type] } ^ drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '(' return 0; ^ drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}') } ^ 3 errors generated. The cleanup in ab8500_interrupts_show left a curly brace around, remove it to fix the error. Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Alexander Lobakin authored
Commit 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask for MSI message mapping, but for now it throws a warning on ret == 0, while dma_set_mask() returns 0 in case of success. Fix this by inverting the condition. [bhelgaas: join string to make it greppable] Fixes: 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.meSigned-off-by:
Alexander Lobakin <alobakin@pm.me> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
Rob Herring authored
Commit b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") broke enumeration of downstream devices on Tegra: In non-working case (next-20201211): 0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) In working case (v5.10-rc7): 0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1) 0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab) The problem seems to be dw_pcie_setup_rc() is now called twice before and after the link up handling. The fix is to move Tegra's link up handling to .start_link() function like other DWC drivers. Tegra is a bit more complicated than others as it re-inits the whole DWC controller to retry the link. With this, the initialization ordering is restored to match the prior sequence. Fixes: b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.orgReported-by:
Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by:
-
- 25 Dec, 2020 1 commit
-
-
Linus Torvalds authored
clang (quite rightly) complains fairly loudly about the newly added mpc1_get_mpc_out_mux() function returning an uninitialized value if the 'opp_id' checks don't pass. This may not happen in practice, but the code really shouldn't return garbage if the sanity checks don't pass. So just initialize 'val' to zero to avoid the issue. Fixes: 110b055b ("drm/amd/display: add getter routine to retrieve mpcc mux") Cc: Josip Pavic <Josip.Pavic@amd.com> Cc: Bindu Ramamurthy <bindu.r@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
