- 27 May, 2009 1 commit
-
-
Manuel Traut authored
platform_data != driver_data driver data is actually the "correct" place of the struct however it is not placed there due to the need of the ac97 struct. This is broken since d9105c2b aka "[ARM] 5184/1: Split ucb1400_ts into core and touchscreen" Signed-off-by: Manuel Traut <manut@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 23 May, 2009 2 commits
-
-
Henrik Rydberg authored
Through the collaboration to adapt the N-trig and Stantum HID drivers to the MT protocol, some semantic clarifications to the protocol have been made. This patch adds them to the MT documentation. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Henrik Rydberg authored
There are a few multi-touch devices that support finger tracking well in hardware, Stantum being the prime example. By exposing the tracking ID in the MT protocol, evdev bandwidth and cpu usage in user space can be reduced. This patch adds the ABS_MT_TRACKING_ID to the MT protocol. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 11 May, 2009 2 commits
-
-
Thierry Reding authored
Now that hrtimers are always running in hard irq context we can't unconditionally enable interrupts at the end of the timer function. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Adrian Batzill authored
Signed-off-by: Adrian Batzill <agib@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 08 May, 2009 2 commits
-
-
Jussi Kivilinna authored
When userspace sets effect->u.rumble.strong_magnitude to 0x8001 or larger, ml_combine_effects() would always return strong_magnitude 0xffff. Problem is that 'gain' is passed in as signed integer. Multiplying magnitude (__u16) with gain (int) causes magnitude read as signed and results negative value (with magnitude > 0x8000). This signed integer is then divided and value, still negative, converted to 32bit unsigned integer. Finally checking combine overflow min(new+old, 0xffff) gives out 0xffff. Fix is to simply change 'gain' to unsigned int. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Tim Cole authored
BTN_TOUCH is not set by the wacom driver which causes it to be handled by the joydev driver while the resulting device is broken. This causes problems with applications that try to use a joystick device. Ubuntu BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/300143Signed-off-by: Tim Cole <tim.cole@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 30 Apr, 2009 1 commit
-
-
Henrik Rydberg authored
This patchs adds documentation for the multi-touch protocol to Documentation/input/. [randy.dunlap@oracle.com: grammar fixes] Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 28 Apr, 2009 9 commits
-
-
Henrik Rydberg authored
In order to utilize the full power of the new multi-touch devices, a way to report detailed finger data to user space is needed. This patch adds a multi-touch (MT) protocol which allows drivers to report details for an arbitrary number of fingers. The driver sends a SYN_MT_REPORT event via the input_mt_sync() function when a complete finger has been reported. In order to stay compatible with existing applications, the data reported in a finger packet must not be recognized as single-touch events. In addition, all finger data must bypass input filtering, since subsequent events of the same type refer to different fingers. A set of ABS_MT events with the desired properties are defined. The events are divided into categories, to allow for partial implementation. The minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size of the approaching finger. Anisotropy and direction may be specified with ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with more granular information may specify general shapes as blobs, i.e., as a sequence of rectangular shapes grouped together by a ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a finger or a pen. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Henrik Rydberg authored
With the upcoming multi-touch interface as an example, there is a need to make certain that all reported events actually get passed to the event handler. This patch equips the input core with the ability to bypass all filtering for certain EV_ABS events. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Henrik Rydberg authored
This patch adds documentation for the bcm5974 to Documentation/input/. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Henrik Rydberg authored
Add more button and finger data to the debug output. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Henrik Rydberg authored
This patch adds support for the new unibody Macbook, with physically integrated button and trackpad. Since the integrated button changes the logic for touch-and-click, a device capability bit mask is now reported in input_id.version, which can be picked up by user space via a EVIOCGID call. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: David M. Lary <dmlary@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Henrik Rydberg authored
The integrated button on the new unibody Macbooks presents a need to report explicit four-finger actions. Evidently, the finger pressing the button is also touching the trackpad, so in order to fully support three-finger actions, the driver must be able to report four-finger actions. This patch adds a new button, BTN_TOOL_QUADTAP, which achieves this. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Henrik Rydberg authored
The new unibody Macbooks are equipped with an integrated button and trackpad. The package header of the trackpad interface has changed to also contain information about the integrated button. This patch performs the necessary preparations to allow for the new package header. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Bob Copeland authored
CONFIG_DMA_API_DEBUG spotted an instance of appletouch using an array on the stack as a DMA buffer for certain hardware. Change it to use a kmalloc()ed buffer instead. Signed-off-by: Bob Copeland <me@bobcopeland.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ping Cheng authored
This patch fixed a bug that was introduced in kernel 2.6.28 for TabletPC touch data. The wacom_parse_hid routine in wacom_sys.c should always return 0 even when usb_control_msg got an error. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 24 Apr, 2009 2 commits
-
-
Dmitry Torokhov authored
Although we already have entry for ZEPHYR the match is done on product name whereas B-2130 BIOS has it in board name. Reported-by: Yuriy Zhuravlev <stalkerg@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
This toshiba has a touchpad with trackpoint and 2 sets of left and right buttons (above and below touchpad). Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 19 Apr, 2009 2 commits
-
-
Arjan Opmeer authored
There exist laptops with Elantech touchpads where switching to absolute mode does not happen, although writing the configuration register succeeds without error. Reading back the register afterwards reveils that the absolute mode bit is not set as if masked out by the touchpad firmware. Always read back register 0x10, make sure that for hardware version 1 the absolute mode bit is actually set and fail otherwise. This prevents the case where the touchpad is claimed by the Elantech driver but is nonetheless not working. Signed-off-by: Arjan Opmeer <arjan@opmeer.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Arjan Opmeer authored
It seems that Elantech touchpad firmware version 2.34 on the Hercules eCAFÉ suffers from a problem where bogus coordinates get reported at the beginning of a touch action. This causes the mouse cursor or the scrolled page to jump. Included patch provides a workaround that discards mouse packets that are likely to contain bogus coordinates. The workaround is activated when we detect touchpad with fimware version 2.34. Signed-off-by: Arjan Opmeer <arjan@opmeer.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 18 Apr, 2009 4 commits
-
-
Ben Nizette authored
disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ben Nizette authored
disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ben Nizette authored
disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ben Nizette authored
disable_irq() waits for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 16 Apr, 2009 2 commits
-
-
Dmitry Torokhov authored
-
Ben Nizette authored
The use of disable_irq inside the handler for the interrupt being disabled has always been dangerous. disable_irq should wait for that handler to complete before returning -> deadlock. For some reason this wasn't actually the case until 3aa551c9 was merged but since this time, the ads7846 driver has deadlocked the system on first interrupt. Convert the driver to use the handler-safe _nosync variant. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 15 Apr, 2009 10 commits
-
-
Jiri Slaby authored
The loop body was never executed, because the condition is always false. Convert to for with more obvious condition. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ilpo Järvinen authored
dev is leftover from b0ee0d3e (Input: pc110pad - use no_pci_devices()). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Michael Hennerich authored
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Michael Hennerich authored
This patch removes depreciated IRQF_SAMPLE_RANDOM flags from ad7877 and ad7879 touchscreen drivers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Eric Miao authored
PEN_{UP/DOWN} events are expected to be available soon after stopping TSI auto measurement, but this is found not always be true. Work around this by adding delay and simulating such an event (according to pen down status bit). Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Eric Miao authored
Bin did a lot of work on this driver, without his help, this driver will not be possible. Signed-off-by: Bin Yang <bin.yang@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Barry Carroll authored
Signed-off-by: Barry Carroll <baz8080@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
The commit 6902c0be that moved driver registration out of kgameportd thread was incomplete and did not add the code necessary to actually attach driver to already registered devices, rectify that. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Alexander Beregalov authored
Fix this build error when CONFIG_SERIO is not set hp_sdc_rtc.c:691: undefined reference to `hp_sdc_request_timer_irq' and so on.. "select should be used with care. select will force a symbol to a value without visiting the dependencies." Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 12 Apr, 2009 3 commits
-
-
Mark Brown authored
The input core will add entropy to the pool so this flag is not needed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Eric Miao authored
Noises can be introduced when LCD signals are being driven, some platforms provide a signal to assist the synchronization of this sampling procedure. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Arjan van de Ven authored
There is no need to issue serialize_rcu() after adding a new handle to the list of handles associated with the device because new events will "see" the new handle in the list immediately. Remove it so we can boot a little bit faster. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-