- 09 Nov, 2018 26 commits
-
-
Anders Roxell authored
This happened while running in qemu-system-aarch64, the AMBA PL011 UART driver when enabling CONFIG_DEBUG_TEST_DRIVER_REMOVE. arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init), devtmpfs' handle_remove() crashes because the reference count is a NULL pointer only because wb->bdi hasn't been initialized yet. Rework so that wb_put have an extra check if wb->bdi before decrement wb->refcnt and also add a WARN_ON_ONCE to get a warning if it happens again in other drivers. Fixes: 52ebea74 ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks") Co-developed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anders Roxell authored
When the test 'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled, arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init). devtmpfs gets killed because we try to remove a file and decrement the wb reference count before the noop_backing_device_info gets initialized. [ 0.332075] Serial: AMBA PL011 UART driver [ 0.485276] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1 [ 0.502382] console [ttyAMA0] enabled [ 0.515710] Unable to handle kernel paging request at virtual address 0000800074c12000 [ 0.516053] Mem abort info: [ 0.516222] ESR = 0x96000004 [ 0.516417] Exception class = DABT (current EL), IL = 32 bits [ 0.516641] SET = 0, FnV = 0 [ 0.516826] EA = 0, S1PTW = 0 [ 0.516984] Data abort info: [ 0.517149] ISV = 0, ISS = 0x00000004 [ 0.517339] CM = 0, WnR = 0 [ 0.517553] [0000800074c12000] user address but active_mm is swapper [ 0.517928] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 0.518305] Modules linked in: [ 0.518839] CPU: 0 PID: 13 Comm: kdevtmpfs Not tainted 4.19.0-rc5-next-20180928-00002-g2ba39ab0cd01-dirty #82 [ 0.519307] Hardware name: linux,dummy-virt (DT) [ 0.519681] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.519959] pc : __destroy_inode+0x94/0x2a8 [ 0.520212] lr : __destroy_inode+0x78/0x2a8 [ 0.520401] sp : ffff0000098c3b20 [ 0.520590] x29: ffff0000098c3b20 x28: 00000000087a3714 [ 0.520904] x27: 0000000000002000 x26: 0000000000002000 [ 0.521179] x25: ffff000009583000 x24: 0000000000000000 [ 0.521467] x23: ffff80007bb52000 x22: ffff80007bbaa7c0 [ 0.521737] x21: ffff0000093f9338 x20: 0000000000000000 [ 0.522033] x19: ffff80007bbb05d8 x18: 0000000000000400 [ 0.522376] x17: 0000000000000000 x16: 0000000000000000 [ 0.522727] x15: 0000000000000400 x14: 0000000000000400 [ 0.523068] x13: 0000000000000001 x12: 0000000000000001 [ 0.523421] x11: 0000000000000000 x10: 0000000000000970 [ 0.523749] x9 : ffff0000098c3a60 x8 : ffff80007bbab190 [ 0.524017] x7 : ffff80007bbaa880 x6 : 0000000000000c88 [ 0.524305] x5 : ffff0000093d96c8 x4 : 61c8864680b583eb [ 0.524567] x3 : ffff0000093d6180 x2 : ffffffffffffffff [ 0.524872] x1 : 0000800074c12000 x0 : 0000800074c12000 [ 0.525207] Process kdevtmpfs (pid: 13, stack limit = 0x(____ptrval____)) [ 0.525529] Call trace: [ 0.525806] __destroy_inode+0x94/0x2a8 [ 0.526108] destroy_inode+0x34/0x88 [ 0.526370] evict+0x144/0x1c8 [ 0.526636] iput+0x184/0x230 [ 0.526871] dentry_unlink_inode+0x118/0x130 [ 0.527152] d_delete+0xd8/0xe0 [ 0.527420] vfs_unlink+0x240/0x270 [ 0.527665] handle_remove+0x1d8/0x330 [ 0.527875] devtmpfsd+0x138/0x1c8 [ 0.528085] kthread+0x14c/0x158 [ 0.528291] ret_from_fork+0x10/0x18 [ 0.528720] Code: 92800002 aa1403e0 d538d081 8b010000 (c85f7c04) [ 0.529367] ---[ end trace 5a3dee47727f877c ]--- Rework to set suppress_bind_attrs flag to avoid removing the device when CONFIG_DEBUG_TEST_DRIVER_REMOVE=y. This applies for pic32_uart and xilinx_uartps as well. Co-developed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
zhong jiang authored
tx_empty is not used after setting its value. It is safe to remove the unused variable. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wolfram Sang authored
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mukesh Kumar Savaliya authored
UART driver checks for the PM state and denies suspend if state is ACTIVE. This makes UART to deny suspend when client keeps port open which is not correct. Instead follow framework and obey suspend-resume callbacks. Signed-off-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Douglas Anderson authored
If you turn on CONFIG_KGDB then you'll get CONFIG_CONSOLE_POLL selected. If you have CONFIG_CONSOLE_POLL selected then the GENI serial driver was setting RX_BYTES_PW to 1 for _all_ UART ports. This doesn't seem like such a good idea. Let's only set RX_BYTES_PW to 1 for the console port. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marcel Ziswiler authored
Fix a few spelling mistakes I stumbled upon while debugging a customers UART issues. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Korsgaard authored
For some use cases it is handy to use a different printk log level than the default (info) for the messages written to ttyprintk, so add a Kconfig option similar to what we have for default console loglevel. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Duan authored
Current driver only enable parity enable bit and never clear it when user set the termios. The fix clear the parity enable bit when PARENB flag is not set in termios->c_cflag. Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Andy Duan <fugang.duan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Duan authored
Fix the typo: UARTCR1_PE -> UARTCTRL_PE There have no function impacted since the macro define value is the same. Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Andy Duan <fugang.duan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shubhrajyoti Datta authored
Currently the clocks are not enabled at probe but when the port is used. Remove the unconditional disable at remove. Fixes the below [ 77.660196] ------------[ cut here ]------------ [ 77.664749] WARNING: CPU: 0 PID: 1992 at drivers/clk/clk.c:622 clk_core_disable+0x78/0x80 [ 77.672892] Modules linked in: [ 77.675930] CPU: 0 PID: 1992 Comm: sh Not tainted 4.14.0 #23 [ 77.681570] Hardware name: xlnx,zynqmp (DT) [ 77.685736] task: ffffffc879e2e580 task.stack: ffffff800be30000 [ 77.691641] PC is at clk_core_disable+0x78/0x80 Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shubhrajyoti Datta authored
Add runtime support Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shubhrajyoti Datta authored
ulite_uart_suspend()/resume() and remove() are using static reference to struct uart_driver. Assign this referece to private data structure as preparation step for dynamic struct uart_driver allocation. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shubhrajyoti Datta authored
Add get serial id if not provided Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shubhrajyoti Datta authored
Move the uart register. This fixes the error path where the clock disable is missed out. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
Clocks and clock-names are updated in device tree binding. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
init_lqasc() is only used internally, change to static declaration. Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
In this existing lantiq serial driver, lantiq_soc.h is defined in the arch directory, ./arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h ./arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h This driver need to be extended to support more platform, lantiq.h is added in include/linux/ to make it globally available and provide some wrapper code. Use lantiq.h to make the driver can find the correct header file. Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
Reorder the head files according to the coding style. Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
Previous implementation uses platform-dependent API to get the clock. Those functions are not available for other SoC which uses the same IP. The CCF (Common Clock Framework) have an abstraction based APIs for clock. In future, the platform specific code will be removed when the legacy soc use CCF as well. Change to use CCF APIs to get clock and rate. So that different SoCs can use the same driver. Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
The clk driver has introduced new clock APIs that replace the existing clk_enable and clk_disable. - clk_enable() APIs is replaced with clk_prepare_enable() - clk_disable() API is replaced with clk_disable_unprepare() Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
fpiclk is platform specific, freqclk is more generic. Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
Previous implementation uses platform-dependent functions ltq_w32()/ltq_r32() to access registers. Those functions are not available for other SoC which uses the same IP. Change to OS provided readl()/writel() and readb()/writeb(), so that different SoCs can use the same driver. Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
ltq prefix is platform specific function, asc prefix is more generic. Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Songjun Wu authored
Get serial id from dts, also keep backward compatible when dts is not updated. Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
While ptr and port both point to the uart_port structure, the former is the untyped pointer cookie passed to interrupt handlers. Use the correctly typed port variable instead, to improve type-safety. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 Nov, 2018 9 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfix: - Fix build issues on architectures that don't provide 64-bit cmpxchg Cleanups: - Fix a spelling mistake" * tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fix spelling mistake, EACCESS -> EACCES SUNRPC: Use atomic(64)_t for seq_send(64)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "A memory (under-)allocation fix and a comment fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/topology: Fix off by one bug sched/rt: Update comment in pick_next_task_rt()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates and fixes from Ingo Molnar: "These are almost all tooling updates: 'perf top', 'perf trace' and 'perf script' fixes and updates, an UAPI header sync with the merge window versions, license marker updates, much improved Sparc support from David Miller, and a number of fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits) perf intel-pt/bts: Calculate cpumode for synthesized samples perf intel-pt: Insert callchain context into synthesized callchains perf tools: Don't clone maps from parent when synthesizing forks perf top: Start display thread earlier tools headers uapi: Update linux/if_link.h header copy tools headers uapi: Update linux/netlink.h header copy tools headers: Sync the various kvm.h header copies tools include uapi: Update linux/mmap.h copy perf trace beauty: Use the mmap flags table generated from headers perf beauty: Wire up the mmap flags table generator to the Makefile perf beauty: Add a generator for MAP_ mmap's flag constants tools include uapi: Update asound.h copy tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies tools include uapi: Update linux/fs.h copy perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc} perf cs-etm: Correct CPU mode for samples perf unwind: Take pgoff into account when reporting elf to libdwfl perf top: Do not use overwrite mode by default perf top: Allow disabling the overwrite mode perf trace: Beautify mount's first pathname arg ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "An irqchip driver fix and a memory (over-)allocation fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function irq/matrix: Fix memory overallocation
-
- 03 Nov, 2018 5 commits
-
-
Peter Zijlstra authored
With the addition of the NUMA identity level, we increased @level by one and will run off the end of the array in the distance sort loop. Fixed: 051f3ca0 ("sched/topology: Introduce NUMA identity node sched domain") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes who have come in near or during the merge window: - Removal of a VLA usage in Marvell mpp platform code - Enable some IPMI options for ARM64 servers by default, helps testing - Enable PREEMPT on 32-bit ARMv7 defconfig - Minor fix for stm32 DT (removal of an unused DMA property) - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf ARM: defconfig: Update multi_v7 to use PREEMPT arm64: defconfig: Enable some IPMI configs soc: ti: QMSS: Fix usage of irq_set_affinity_hint ARM: OMAP1: ams-delta: Fix impossible .irq < 0
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull more arm64 updates from Catalin Marinas: - fix W+X page (mark RO) allocated by the arm64 kprobes code - Makefile fix for .i files in out of tree modules * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kprobe: make page to RO mode when allocate it arm64: kdump: fix small typo arm64: makefile fix build of .i file in external module case
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fix from Christoph Hellwig: "Avoid compile warnings on non-default arm64 configs" * tag 'dma-mapping-4.20-2' of git://git.infradead.org/users/hch/dma-mapping: arm64: fix warnings without CONFIG_IOMMU_DMA
-