- 22 Dec, 2020 5 commits
-
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping updates from Christoph Hellwig: - support for a partial IOMMU bypass (Alexey Kardashevskiy) - add a DMA API benchmark (Barry Song) - misc fixes (Tiezhu Yang, tangjianqiang) * tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping: selftests/dma: add test application for DMA_MAP_BENCHMARK dma-mapping: add benchmark support for streaming DMA APIs dma-contiguous: fix a typo error in a comment dma-pool: no need to check return value of debugfs_create functions powerpc/dma: Fallback to dma_ops when persistent memory present dma-mapping: Allow mixing bypass and mapped DMA operation
-
git://git.infradead.org/users/hch/configfsLinus Torvalds authored
Pull configfs update from Christoph Hellwig: "Fix a kerneldoc comment (Alex Shi)" * tag 'configfs-5.11' of git://git.infradead.org/users/hch/configfs: configfs: fix kernel-doc markup issue
-
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfatLinus Torvalds authored
Pull exfat update from Namjae Jeon: "Avoid page allocation failure from upcase table allocation" * tag 'exfat-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: Avoid allocating upcase table using kcalloc()
-
Andi Kleen authored
When a split lock is detected always make sure to disable interrupts before returning from the trap handler. The kernel exit code assumes that all exits run with interrupts disabled, otherwise the SWAPGS sequence can race against interrupts and cause recursing page faults and later panics. The problem will only happen on CPUs with split lock disable functionality, so Icelake Server, Tiger Lake, Snow Ridge, Jacobsville. Fixes: ca4c6a98 ("x86/traps: Make interrupt enable/disable symmetric in C code") Fixes: bce9b042 ("x86/traps: Disable interrupts in exc_aligment_check()") # v5.8+ Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Artem Labazov authored
The table for Unicode upcase conversion requires an order-5 allocation, which may fail on a highly-fragmented system: pool-udisksd: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null), cpuset=/,mems_allowed=0 CPU: 4 PID: 3756880 Comm: pool-udisksd Tainted: G U 5.8.10-200.fc32.x86_64 #1 Hardware name: Dell Inc. XPS 13 9360/0PVG6D, BIOS 2.13.0 11/14/2019 Call Trace: dump_stack+0x6b/0x88 warn_alloc.cold+0x75/0xd9 ? _cond_resched+0x16/0x40 ? __alloc_pages_direct_compact+0x144/0x150 __alloc_pages_slowpath.constprop.0+0xcfa/0xd30 ? __schedule+0x28a/0x840 ? __wait_on_bit_lock+0x92/0xa0 __alloc_pages_nodemask+0x2df/0x320 kmalloc_order+0x1b/0x80 kmalloc_order_trace+0x1d/0xa0 exfat_create_upcase_table+0x115/0x390 [exfat] exfat_fill_super+0x3ef/0x7f0 [exfat] ? sget_fc+0x1d0/0x240 ? exfat_init_fs_context+0x120/0x120 [exfat] get_tree_bdev+0x15c/0x250 vfs_get_tree+0x25/0xb0 do_mount+0x7c3/0xaf0 ? copy_mount_options+0xab/0x180 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Make the driver use kvcalloc() to eliminate the issue. Fixes: 370e812b ("exfat: add nls operations") Cc: stable@vger.kernel.org #v5.7+ Signed-off-by:
Artem Labazov <123321artyom@gmail.com> Signed-off-by:
Namjae Jeon <namjae.jeon@samsung.com>
-
- 21 Dec, 2020 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu updates from Greg Ungerer: - cleanup of 68328 code - align BSS section to 32bit * tag 'm68knommu-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: m68328: remove duplicate code m68k: m68328: move platform code to separate files m68knommu: align BSS section to 4-byte boundaries
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p update from Dominique Martinet: - fix long-standing limitation on open-unlink-fop pattern - add refcount to p9_fid (fixes the above and will allow for more cleanups and simplifications in the future) * tag '9p-for-5.11-rc1' of git://github.com/martinetd/linux: 9p: Remove unnecessary IS_ERR() check 9p: Uninitialized variable in v9fs_writeback_fid() 9p: Fix writeback fid incorrectly being attached to dentry 9p: apply review requests for fid refcounting 9p: add refcount to p9_fid struct fs/9p: search open fids first fs/9p: track open fids fs/9p: fix create-unlink-getattr idiom
-
Stephen Boyd authored
Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and 'clk-marvell' into clk-next - Bindings for Canaan K210 SoC clks * clk-ingenic: clk: ingenic: Fix divider calculation with div tables * clk-vc5: clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" * clk-cleanup: clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: bcm: dvp: Add MODULE_DEVICE_TABLE() clk: bcm: dvp: drop a variable that is assigned to only * clk-canaan: dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix * clk-marvell: clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
-
Stephen Boyd authored
- Add some trace points for clk_set_rate() "range" functions - DVFS support for AT91 clk driver * clk-ti: clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERs clk: ti: Fix memleak in ti_fapll_synth_setup * clk-analog: clk: axi-clkgen: move the OF table at the bottom of the file clk: axi-clkgen: wrap limits in a struct and keep copy on the state object dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format * clk-trace: clk: Trace clk_set_rate() "range" functions * clk-at91: clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error * clk-silabs: clk: si5351: Wait for bit clear after PLL reset
-
Stephen Boyd authored
- Support for SiFive FU740 PRCI - Add hardware enable information to clk_summary debugfs * clk-tegra: clk: tegra: Fix duplicated SE clock entry clk: tegra: bpmp: Clamp clock rates on requests clk: tegra: Do not return 0 on failure * clk-imx: (24 commits) clk: imx: scu: remove the calling of device_is_bound clk: imx: scu: Make pd_np with static keyword clk: imx8mq: drop of_match_ptr from of_device_id table clk: imx8mp: drop of_match_ptr from of_device_id table clk: imx8mn: drop of_match_ptr from of_device_id table clk: imx8mm: drop of_match_ptr from of_device_id table clk: imx: gate2: Remove unused variable ret clk: imx: gate2: Add locking in is_enabled op clk: imx: gate2: Add cgr_mask for more flexible number of control bits clk: imx: gate2: Check if clock is enabled against cgr_val clk: imx: gate2: Keep the register writing in on place clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case clk: imx: scu: fix build break when compiled as modules clk: imx: remove redundant assignment to pointer np clk: imx: remove unneeded semicolon clk: imx: lpcg: add suspend/resume support clk: imx: clk-imx8qxp-lpcg: add runtime pm support clk: imx: lpcg: allow lpcg clk to take device pointer clk: imx: imx8qxp-lpcg: add parsing clocks from device tree clk: imx: scu: add suspend/resume support ... * clk-sifive: clk: sifive: Add clock enable and disable ops clk: sifive: Fix the wrong bit field shift clk: sifive: Add a driver for the SiFive FU740 PRCI IP block clk: sifive: Use common name for prci configuration clk: sifive: Extract prci core to common base dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI * clk-mediatek: clk: mediatek: Make mtk_clk_register_mux() a static function * clk-summary: clk: Add hardware-enable column to clk summary
-
Stephen Boyd authored
Merge branches 'clk-amlogic', 'clk-rockchip', 'clk-of', 'clk-freescale' and 'clk-unused' into clk-next - Replace clk-provider.h with of_clk.h when possible * clk-amlogic: clk: meson: g12a: add MIPI DSI Host Pixel Clock dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings clk: meson: enable building as modules clk: meson: Kconfig: fix dependency for G12A clk: meson: axg: add MIPI DSI Host clock clk: meson: axg: add Video Clocks dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks * clk-rockchip: clk: rockchip: fix i2s gate bits on rk3066 and rk3188 clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks clk: rockchip: Remove redundant null check before clk_prepare_enable clk: rockchip: Add appropriate arch dependencies * clk-of: xtensa: Replace <linux/clk-provider.h> by <linux/of_clk.h> sh: boards: Replace <linux/clk-provider.h> by <linux/of_clk.h> * clk-freescale: clk: fsl-flexspi: new driver dt-bindings: clock: document the fsl-flexspi-clk device clk: divider: add devm_clk_hw_register_divider_table() clk: qoriq: provide constants for the type clk: fsl-sai: use devm_clk_hw_register_composite_pdata() clk: composite: add devm_clk_hw_register_composite_pdata() clk: fsl-sai: fix memory leak clk: qoriq: Add platform dependencies * clk-unused: clk: scpi: mark scpi_clk_match as maybe unused clk: pwm: drop of_match_ptr from of_device_id table
-
Stephen Boyd authored
Merge branches 'clk-doc', 'clk-qcom', 'clk-simplify', 'clk-hw', 'clk-renesas' and 'clk-samsung' into clk-next - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw * clk-doc: clk: fix a kernel-doc markup * clk-qcom: (27 commits) clk: qcom: rpmh: add support for SM8350 rpmh clocks dt-bindings: clock: Add RPMHCC bindings for SM8350 clk: qcom: lpasscc: Introduce pm autosuspend for SC7180 clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2 clk: qcom: gcc-sc7180: Use floor ops for sdcc clks clk: qcom: Add GDSC support for SDX55 GCC dt-bindings: clock: Add GDSC in SDX55 GCC clk: qcom: Add support for SDX55 RPMh clocks dt-bindings: clock: Introduce RPMHCC bindings for SDX55 clk: qcom: Add SDX55 GCC support dt-bindings: clock: Add SDX55 GCC clock bindings clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic" clk: qcom: rpmh: Add CE clock on sdm845. dt-bindings: clock: Add entry for crypto engine RPMH clock resource clk: qcom: dispcc-sm8250: handle MMCX power domain clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones clk: qcom: lpass-sc7180: Clean up on error in lpass_sc7180_init() clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks dt-bindings: clock: Add support for LPASS Always ON Controller ... * clk-simplify: clk: remove unneeded dead-store initialization * clk-hw: clk: meson: g12: use devm variant to register notifiers clk: add devm variant of clk_notifier_register clk: meson: g12: drop use of __clk_lookup() clk: add api to get clk consumer from clk_hw clk: avoid devm_clk_release name clash * clk-renesas: dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema clk: renesas: sh73a0: Stop using __raw_*() I/O accessors clk: renesas: r8a774c0: Add RPC clocks clk: renesas: r8a779a0: Fix R and OSC clocks clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get() clk: renesas: r8a774b1: Add RPC clocks clk: renesas: r8a774a1: Add RPC clocks clk: renesas: r8a779a0: Add VIN clocks clk: renesas: r8a779a0: Add CSI4[0-3] clocks MAINTAINERS: Update git repo for Renesas clock drivers clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI * clk-samsung: clk: samsung: Prevent potential endless loop in the PLL ops clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210
-
- 20 Dec, 2020 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linuxLinus Torvalds authored
Pull orangefs update from Mike Marshall: "Add splice file operations" * tag 'for-linus-5.11-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: add splice file operations
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Four small CIFS/SMB3 fixes (witness protocol and reconnect related), and two that add ability to get and set auditing information in the security descriptor (SACL), which can be helpful not just for backup scenarios ("smbinfo secdesc" etc.) but also for improving security" * tag '5.11-rc-smb3-part2' of git://git.samba.org/sfrench/cifs-2.6: Add SMB 2 support for getting and setting SACLs SMB3: Add support for getting and setting SACLs cifs: Avoid error pointer dereference cifs: Re-indent cifs_swn_reconnect() cifs: Unlock on errors in cifs_swn_reconnect() cifs: Delete a stray unlock in cifs_swn_reconnect() -
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull perf tools updates from Arnaldo Carvalho de Melo: "perf record: - Fix memory leak when using '--user-regs=?' to list registers aarch64 support: - Add aarch64 registers to 'perf record's' --user-regs command line option aarch64 hw tracing support: - Decode memory tagging properties - Improve ARM's auxtrace support - Add support for ARMv8.3-SPE perf kvm: - Add kvm-stat for arm64 perf stat: - Add --quiet option Cleanups: - Fixup function names wrt what is in libperf and what is in tools/perf Build: - Allow building without libbpf in older systems New kernel features: - Initial support for data/code page size sample type, more to come perf annotate: - Support MIPS instruction extended support perf stack unwinding: - Fix separate debug info files when using elfutils' libdw's unwinder perf vendor events: - Update Intel's Skylake client events to v50 - Add JSON metrics for ARM's imx8mm DDR Perf - Support printing metric groups for system PMUs perf build id: - Prep work for supporting having the build id provided by the kernel in PERF_RECORD_MMAP2 metadata events perf stat: - Support regex pattern in --for-each-cgroup pipe mode: - Allow to use stdio functions for pipe mode - Support 'perf report's' --header-only for pipe mode - Support pipe mode display in 'perf evlist' Documentation: - Update information about CAP_PERFMON" * tag 'perf-tools-2020-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (134 commits) perf mem: Factor out a function to generate sort order perf sort: Add sort option for data page size perf script: Support data page size tools headers UAPI: Update asm-generic/unistd.h tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync linux/prctl.h with the kernel sources tools headers UAPI: Sync linux/fscrypt.h with the kernel sources tools headers UAPI: Sync linux/const.h with the kernel headers tools arch x86: Sync the msr-index.h copy with the kernel sources perf trace beauty: Update copy of linux/socket.h with the kernel sources tools headers: Update linux/ctype.h with the kernel sources tools headers: Add conditional __has_builtin() tools headers: Get tools's linux/compiler.h closer to the kernel's tools headers UAPI: Sync linux/stat.h with the kernel sources tools headers: Syncronize linux/build_bug.h with the kernel sources perf tools: Reformat record's control fd man text perf config: Fix example command in manpage to conform to syntax specified in the SYNOPSIS section. perf test: Make sample-parsing test aware of PERF_SAMPLE_{CODE,DATA}_PAGE_SIZE perf tools: Add support to read build id from compressed elf perf debug: Add debug_set_file function ... -
Damien Le Moal authored
Document the device tree bindings of the Canaan Kendryte K210 SoC clock driver in Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml. The header file include/dt-bindings/clock/k210-clk.h is modified to include the complete list of IDs for all clocks of the SoC. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201220085725.19545-3-damien.lemoal@wdc.comSigned-off-by:
Stephen Boyd <sboyd@kernel.org>
-
Damien Le Moal authored
Update Documentation/devicetree/bindings/vendor-prefixes.yaml to include "canaan" as a vendor prefix for "Canaan Inc.". Canaan is the vendor of the Kendryte K210 RISC-V SoC. Signed-off-by:
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Paolo Bonzini: "Much x86 work was pushed out to 5.12, but ARM more than made up for it. ARM: - PSCI relay at EL2 when "protected KVM" is enabled - New exception injection code - Simplification of AArch32 system register handling - Fix PMU accesses when no PMU is enabled - Expose CSV3 on non-Meltdown hosts - Cache hierarchy discovery fixes - PV steal-time cleanups - Allow function pointers at EL2 - Various host EL2 entry cleanups - Simplification of the EL2 vector allocation s390: - memcg accouting for s390 specific parts of kvm and gmap - selftest for diag318 - new kvm_stat for when async_pf falls back to sync x86: - Tracepoints for the new pagetable code from 5.10 - Catch VFIO and KVM irqfd events before userspace - Reporting dirty pages to userspace with a ring buffer - SEV-ES host support - Nested VMX support for wait-for-SIPI activity state - New feature flag (AVX512 FP16) - New system ioctl to report Hyper-V-compatible paravirtualization features Generic: - Selftest improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: SVM: fix 32-bit compilation KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting KVM: SVM: Provide support to launch and run an SEV-ES guest KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests KVM: SVM: Provide support for SEV-ES vCPU loading KVM: SVM: Provide support for SEV-ES vCPU creation/loading KVM: SVM: Update ASID allocation to support SEV-ES guests KVM: SVM: Set the encryption mask for the SVM host save area KVM: SVM: Add NMI support for an SEV-ES guest KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest KVM: SVM: Do not report support for SMM for an SEV-ES guest KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES KVM: SVM: Add support for CR8 write traps for an SEV-ES guest KVM: SVM: Add support for CR4 write traps for an SEV-ES guest KVM: SVM: Add support for CR0 write traps for an SEV-ES guest KVM: SVM: Add support for EFER write traps for an SEV-ES guest KVM: SVM: Support string IO operations for an SEV-ES guest KVM: SVM: Support MMIO for an SEV-ES guest KVM: SVM: Create trace events for VMGEXIT MSR protocol processing KVM: SVM: Create trace events for VMGEXIT processing ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Subsystem: - Remove nvram ABI. There was no complaints about the deprecation for the last 3 years. - Improve RTC device allocation and registration - Now available for ARCH=um Drivers: - at91rm9200: correction and sam9x60 support - ds1307: improve ACPI support - mxc: now DT only - pcf2127: watchdog support now needs the reset-source property - pcf8523: set range - rx6110: i2c support" * tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (43 commits) rtc: pcf2127: only use watchdog when explicitly available dt-bindings: rtc: add reset-source property rtc: fix RTC removal rtc: s3c: Remove dead code related to periodic tick handling rtc: s3c: Disable all enable (RTC, tick) bits in the probe rtc: ep93xx: Fix NULL pointer dereference in ep93xx_rtc_read_time rtc: test: remove debug message rtc: mxc{,_v2}: enable COMPILE_TEST rtc: enable RTC framework on ARCH=um rtc: pcf8523: use BIT rtc: pcf8523: set range rtc: pcf8523: switch to devm_rtc_allocate_device rtc: destroy mutex when releasing the device rtc: shrink devm_rtc_allocate_device() rtc: rework rtc_register_device() resource management rtc: nvmem: emit an error message when nvmem registration fails rtc: add devm_ prefix to rtc_nvmem_register() rtc: nvmem: remove nvram ABI Documentation: list RTC devres helpers in devres.rst rtc: omap: use devm_pinctrl_register() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Don't wait for unfreeze of the wrong filesystems - Remove an obsolete delete_work_func hack and an incorrect sb_start_write - Minor documentation updates and cosmetic care * tag 'gfs2-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: in signal_our_withdraw wait for unfreeze of _this_ fs only gfs2: Remove sb_start_write from gfs2_statfs_sync gfs2: remove trailing semicolons from macro definitions Revert "GFS2: Prevent delete work from occurring on glocks used for create" gfs2: Make inode operations static MAINTAINERS: Add gfs2 bug tracker link Documentation: Update filesystems/gfs2.rst
-
Heiko Carstens authored
Commit b0a0c261 ("epoll: wire up syscall epoll_pwait2") wired up the 64 bit syscall instead of the compat variant in a couple of places. Fixes: b0a0c261 ("epoll: wire up syscall epoll_pwait2") Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Cc: Willem de Bruijn <willemb@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Geert Uytterhoeven authored
Commit 45c94018 ("dt-bindings: clk: versaclock5: convert to yaml") accidentally changed "idt,voltage-microvolts" to "idt,voltage-microvolt" in the DT bindings, while the driver still used the former. Update the driver to match the bindings, as Documentation/devicetree/bindings/property-units.txt actually recommends using "microvolt". Fixes: 260249f9 ("clk: vc5: Enable addition output configurations of the Versaclock") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201218125253.3815567-1-geert+renesas@glider.beReviewed-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Paul Cercueil authored
The previous code assumed that a higher hardware value always resulted in a bigger divider, which is correct for the regular clocks, but is an invalid assumption when a divider table is provided for the clock. Perfect example of this is the PLL0_HALF clock, which applies a /2 divider with the hardware value 0, and a /1 divider otherwise. Fixes: a9fa2893 ("clk: ingenic: Add support for divider tables") Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201212135733.38050-1-paul@crapouillou.netSigned-off-by:
-
- 19 Dec, 2020 16 commits
-
-
Jernej Skrabec authored
Two clock divider tables are missing sentinel at the end. Effect of that is that clock framework reads past the last entry. Fix that with adding sentinel at the end. Issue was discovered with KASan. Fixes: 0577e485 ("clk: sunxi-ng: Add H3 clocks") Fixes: c6a06374 ("clk: sunxi-ng: Add A64 clocks") Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201202203817.438713-1-jernej.skrabec@siol.netAcked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
Some resource should be released in the error handling path of the probe function, as already done in the remove function. The remove function was fixed in commit bf416bd4 ("clk: s2mps11: Add missing of_node_put and of_clk_del_provider") Fixes: 7cc560de ("clk: s2mps11: Add support for s2mps11") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201212122818.86195-1-christophe.jaillet@wanadoo.frReviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Terry Zhou authored
There is an error in the current code that the XTAL MODE pin was set to NB MPP1_31 which should be NB MPP1_9. The latch register of NB MPP1_9 has different offset of 0x8. Signed-off-by:
Terry Zhou <bjzhou@marvell.com> [pali: Fix pin name in commit message] Signed-off-by:
Pali Rohár <pali@kernel.org> Fixes: 7ea82504 ("clk: mvebu: Add the xtal clock for Armada 3700 SoC") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201106100039.11385-1-pali@kernel.orgReviewed-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
-
Sascha Hauer authored
Documentation states that SI5351_PLL_RESET_B and SI5351_PLL_RESET_A bits are self clearing bits, so wait until they are cleared before continuing. This fixes a case when the clock doesn't come up properly after a PLL reset. It worked properly when the frequency was below 900MHz, but with 900MHz it only works when we are waiting for the bit to clear. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20201130091033.1687-1-s.hauer@pengutronix.deSigned-off-by:
-
Alexandre Belloni authored
The sam9x60 doesn't have the MOSCXTBY bit to enable the crystal oscillator bypass. Fixes: 01e2113d ("clk: at91: add sam9x60 pmc driver") Reported-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201202125816.168618-1-alexandre.belloni@bootlin.comReviewed-by:
-
Linus Torvalds authored
Merge tag 'close-range-cloexec-unshare-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull close_range fix from Christian Brauner: "syzbot reported a bug when asking close_range() to unshare the file descriptor table and making all fds close-on-exec. If CLOSE_RANGE_UNSHARE the caller will receive a private file descriptor table in case their file descriptor table is currently shared before operating on the requested file descriptor range. For the case where the caller has requested all file descriptors to be actually closed via e.g. close_range(3, ~0U, CLOSE_RANGE_UNSHARE) the kernel knows that the caller does not need any of the file descriptors anymore and will optimize the close operation by only copying all files in the range from 0 to 3 and no others. However, if the caller requested CLOSE_RANGE_CLOEXEC together with CLOSE_RANGE_UNSHARE the caller wants to still make use of the file descriptors so the kernel needs to copy all of them and can't optimize. The original patch didn't account for this and thus could cause oopses as evidenced by the syzbot report because it assumed that all fds had been copied. Fix this by handling the CLOSE_RANGE_CLOEXEC case and copying all fds if the two flags are specified together. This should've been caught in the selftests but the original patch didn't cover this case and I didn't catch it during review. So in addition to the bugfix I'm also adding selftests. They will reliably reproduce the bug on a non-fixed kernel and allows us to catch regressions and verify correct behavior. Note, the kernel selftest tree contained a bunch of changes that made the original selftest fail to compile so there are small fixups in here make them compile without warnings" * tag 'close-range-cloexec-unshare-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests/core: add regression test for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC selftests/core: add test for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC selftests/core: handle missing syscall number for close_range selftests/core: fix close_range_test build after XFAIL removal close_range: unshare all fds for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull more xen updates from Juergen Gross: "Some minor cleanup patches and a small series disentangling some Xen related Kconfig options" * tag 'for-linus-5.11-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Kconfig: remove X86_64 depends from XEN_512GB xen/manage: Fix fall-through warnings for Clang xen-blkfront: Fix fall-through warnings for Clang xen: remove trailing semicolon in macro definition xen: Kconfig: nest Xen guest options xen: Remove Xen PVH/PVHVM dependency on PCI x86/xen: Convert to DEFINE_SHOW_ATTRIBUTE
-
Kan Liang authored
Now, "--phys-data" is the only option which impacts the sort order. A simple "if else" is enough to handle the option. But there will be more options added, e.g. "--data-page-size", which also impact the sort order. The code will become too complex to be maintained. Divide the sort order string into several small pieces. The first piece is always the default sort string for LOAD/STORE. Appends the specific sort string if related option is applied. No functional change. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/20201216185805.9981-4-kan.liang@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Kan Liang authored
Add a new sort option "data_page_size" for --mem-mode sort. With this option applied, perf can sort and report by sample's data page size. Here is an example: perf report --stdio --mem-mode --sort=comm,symbol,phys_daddr,data_page_size # To display the perf.data header info, please use # --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 9K of event 'mem-loads:uP' # Total weight : 9028 # Sort order : comm,symbol,phys_daddr,data_page_size # # Overhead Command Symbol Data Physical # Address # Data Page Size # ........ ....... ............................ # ...................... ...................... # 11.19% dtlb [.] touch_buffer [.] 0x00000003fec82ea8 4K 8.61% dtlb [.] GetTickCount [.] 0x00000003c4f2c8a8 4K 4.52% dtlb [.] GetTickCount [.] 0x00000003fec82f58 4K 4.33% dtlb [.] __gettimeofday [.] 0x00000003fec82f48 4K 4.32% dtlb [.] GetTickCount [.] 0x00000003fec82f78 4K 4.28% dtlb [.] GetTickCount [.] 0x00000003fec82f50 4K 4.23% dtlb [.] GetTickCount [.] 0x00000003fec82f70 4K 4.11% dtlb [.] GetTickCount [.] 0x00000003fec82f68 4K 4.00% dtlb [.] Calibrate [.] 0x00000003fec82f98 4K 3.91% dtlb [.] Calibrate [.] 0x00000003fec82f90 4K 3.43% dtlb [.] touch_buffer [.] 0x00000003fec82e98 4K 3.42% dtlb [.] touch_buffer [.] 0x00000003fec82e90 4K 0.09% dtlb [.] DoDependentLoads [.] 0x000000036ea084c0 2M 0.08% dtlb [.] DoDependentLoads [.] 0x000000032b010b80 2M Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linuxLinus Torvalds authored
Pull pcmcia updates from Dominik Brodowski: "Besides a few PCMCIA odd fixes, the NEC VRC4173 CARDU driver is removed, as it has not compiled in ages" * 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: pcmcia: omap: Fix error return code in omap_cf_probe() pcmcia: Remove NEC VRC4173 CARDU pcmcia: db1xxx_ss: remove unneeded semicolon pcmcia/electra_cf: Fix some return values in 'electra_cf_probe()' in case of error
-
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxLinus Torvalds authored
Pull i3c updates from Boris Brezillon: - Add the HCI driver - Add a missing destroy_workqueue() in an error path - Flag Alexandre Belloni as the new maintainer * tag 'i3c/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c/master/mipi-i3c-hci: quiet maybe-unused variable warning i3c: Resign from my maintainer role i3c/master: Fix uninitialized variable next_addr i3c/master: introduce the mipi-i3c-hci driver dt-bindings: i3c: MIPI I3C Host Controller Interface i3c master: fix missing destroy_workqueue() on error in i3c_master_register
-
Kan Liang authored
Display the data page size if it is available and asked by the user: Can be configured by the user, for example: perf script --fields comm,event,phys_addr,data_page_size dtlb mem-loads:uP: 3fec82ea8 4K dtlb mem-loads:uP: 3fec82e90 4K dtlb mem-loads:uP: 3e23700a4 4K dtlb mem-loads:uP: 3fec82f20 4K dtlb mem-loads:uP: 3e23700a4 4K dtlb mem-loads:uP: 3b4211bec 4K dtlb mem-loads:uP: 382205dc0 2M dtlb mem-loads:uP: 36fa082c0 2M dtlb mem-loads:uP: 377607340 2M dtlb mem-loads:uP: 330010180 2M dtlb mem-loads:uP: 33200fd80 2M dtlb mem-loads:uP: 31b012b80 2M Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: "Battery/charger driver changes: - collie_battery, generic-adc-battery, s3c-adc-battery: convert to GPIO descriptors (incl ARM board files) - misc cleanup and fixes Reset drivers: - new poweroff driver for force disabling a regulator - use printk format symbol resolver - ocelot: add support for Luton and Jaguar2" * tag 'for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (31 commits) power: supply: Fix a typo in warning message Documentation: DT: binding documentation for regulator-poweroff power: reset: new driver regulator-poweroff power: supply: ab8500: Use dev_err_probe() for IIO channels power: supply: ab8500_fg: Request all IRQs as threaded power: supply: ab8500_charger: Oneshot threaded IRQs power: supply: ab8500: Convert to dev_pm_ops power: supply: ab8500: Use local helper power: supply: wm831x_power: remove unneeded break power: supply: bq24735: Drop unused include power: supply: bq24190_charger: Drop unused include power: supply: generic-adc-battery: Use GPIO descriptors power: supply: collie_battery: Convert to GPIO descriptors power: supply: bq24190_charger: fix reference leak power: supply: s3c-adc-battery: Convert to GPIO descriptors power: reset: Use printk format symbol resolver power: supply: axp20x_usb_power: Use power efficient workqueue for debounce power: supply: axp20x_usb_power: fix typo power: supply: max8997-charger: Improve getting charger status power: supply: max8997-charger: Fix platform data retrieval ... -
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI updates from Sebastian Reichel: "Misc cleanups" * tag 'hsi-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: core: fix a kernel-doc markup HSI: omap_ssi: Don't jump to free ID in ssi_add_controller()
-
Linus Torvalds authored
Merge tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This is a fairly big release cycle from the PWM framework's point of view. There's a large patcheset here which converts drivers to use the new devm_platform_ioremap_resource() helper and a bunch of minor fixes to existing drivers. Some of the existing drivers also add support for more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183. Finally there's a couple of new drivers for Intel Keem Bay and LGM SoCs as well as the DesignWare PWM controller" * tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (66 commits) pwm: sun4i: Remove erroneous else branch pwm: sl28cpld: Set driver data before registering the PWM chip pwm: Remove unused function pwmchip_add_inversed() pwm: imx27: Fix overflow for bigger periods pwm: bcm2835: Support apply function for atomic configuration pwm: keembay: Fix build failure with -Os pwm: core: Use octal permission pwm: lpss: Make compilable with COMPILE_TEST pwm: Fix dependencies on HAS_IOMEM pwm: Use -EINVAL for unsupported polarity pwm: sti: Remove unnecessary blank line pwm: sti: Avoid conditional gotos pwm: Add PWM fan controller driver for LGM SoC Add DT bindings YAML schema for PWM fan controller of LGM SoC pwm: Add DesignWare PWM Controller Driver dt-bindings: pwm: mtk-disp: add MT8167 SoC binding pwm: mediatek: Add MT8183 SoC support pwm: mediatek: Always use bus clock dt-bindings: pwm: pwm-mediatek: Add documentation for MT8183 SoC pwm: Add PWM driver for Intel Keem Bay ...
-
Claudiu Beznea authored
Register CPU clock as being the master clock prescaler. This would be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the frequencies supported by SAMA7G5 could be directly received from CPUPLL + master clock prescaler and the extra divider would do no work in case it would be enabled. Signed-off-by:
-
