Ted's recent random.c update broke the periodic rekeying:
schedule_work() doesn't provide synchronization. Additionally the first
syn values after boot are generated with secret 0 - not good.

Attached is a big cleanup. Linus asked me to send to to you for merging:

The tcp sequence number generator needs a random seed that is reset every
few minutes. Since the sequence numbers should be constantly increasing,
for each rekey 2^24 is added to the sequence number.
The actual use of the sequence number generator is lockless,
synchronization is achieved by having two copies of the control structure.

The attached patch:
- fixes a race in rekey_seq_generator(): schedule_work doesn't
   provide synchronization.
- Uses schedule_delayed_work() for the rekey: simplifies synchronization
   and speeds up the hot path.
- Adds a late_initcall for the first initialization after boot.
   init_call would be too early, I've checked that the late_initcall runs
   before net/ipv4/ipconfig.c, i.e. the BOOTP/DHCP autoconfiguration.
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the existing rate estimator to compile cleanly on all platforms
and avoids carrying on the variance on platforms with HZ%4 != 0.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

Work done by Thomas Graf <tgraf@suug.ch> and
Jamal Hadi Salim <hadi@cyberus.ca>

The following patchset introduces generic network statistics for
netlink users. It uses nested TLV which prevents further compatibility
problems when introducing new statistics. Backward compatibility to
existing TLV types TCA_STATS and TCA_XSTATS is ensured but can be
easly removed once it is no longer needed. Therefore prior users of
struct tc_stats can be converted to this API and existing userspace
applications will not notice a difference while converted applications
can use the new extendable statistic interface.

Changes:
- Add generic network statistics API for netlink users.
- Introduces a generic rate estimator based on timers. Patch is based
  on Jamals patch and adapted to the new generic network statistics
  API.
- Add documentation of generic network statistics and estimator API.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove useless line in cbq_dump_class probably introduced by
copy&paste from cbq_dump.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by; Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by; Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

 There is a problem with "struct fddi_statistics" for 64-bit systems.
The starting members of the struct are expected to correspond to the
respective members of "struct net_device_stats" (drivers for FDDI
devices return "struct fddi_statistics" in the response to the
get_stats() call of "struct net_device").  Unfortunately, due to using
different types (u32 vs ulong) they do not.  "struct net_device_stats"
is a public interface and as a result, bogus results are retrieved,
e.g. for /proc/net/dev.

 Here is my proposal to address the problem.  I think there is no
point in duplicating the layout of "struct net_device_stats" in
"struct fddi_statistics" as the former can simply be included as a
member avoiding this problem and actually any possible discrepancy in
the future.  This also preserves the layout of the structure for
32-bit systems.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch from Herbert V. Riedel <hvr@gnu.org> adds __initdata to the
generic AES code where appropriate.  I also added __init to f_mult().
Signed-off-by: Herbert V. Riedel <hvr@gnu.org>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a race between neigh_timer_handler() calling down to arp_solicit()
with an sk_buff peeked from the head of the neigh->arp_queue, and
neigh_event_send() unqueuing and freeing the head of the same queue
because it's reached the maximum length of 3, by taking an extra
sk_buff reference while holding neigh->lock.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Here is the patch from Justin Ossevoort <justin@snt.utwente.nl> to fix 
endian problem on IPVS sync message size.
Signed-off-by: David S. Miller <davem@davemloft.net>

The I2C adapter wasn't de-registered correctly in case the video card
wasn't found.  When the I2C subsystem tried to speak with the dangling
I2C adapter later on, usually an oops happened.

Roman Zippel submitted this to lk but I missed it, it does
what I tried to do badly before.
Signed-off-by: Dave Airlie <airlied@linux.ie>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

Fixed GPG pin numbering, and missing changelog

Added code to setup the interrupt filtering on
compatible Pins

Signed-off-by: Ben Dooks

Patch from Ben Dooks

Header file defining S3C2410 SPI registers

Signed-off-by: Klaus Fetscher 
Signed-off-by: Ben Dooks 

Patch from Ben Dooks

Added documentation for the GPIO calls, updated
the overview with more information on the supported
core devices, and updated the state of the EB2410ITX

Signed-off-by: Ben Dooks 

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: David S. Miller <davem@davemloft.net>

into nuts.davemloft.net:/disk1/BK/net-2.6

Al suggested a sparse warning. And sure enough, it found
these ones.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

The attached patch makes s390 sclp driver buildable again.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

Add definitions to the MISCCR register for configuration
of the signal states in power down mode.

Signed-off-by: Ben Dooks 

Patch from Ben Dooks

Include file include/asm-arm/arch-s3c2410/regs-iic.h,
for the I2C controller on the S3C2410 Samsung SoC.

Signed-off-by: Ben Dooks

Patch from Ben Dooks

Header file include/asm-arm/arch-s3c2410/regs-mem.h containing
definitions for the S3C2410 memory controller

Signed-off-by: Ben Dooks 

Patch from Dave Jiang

Latest IQ80331 redboot changed value of ATU registers and is causing master aborts on the plugged in card. Changing value back to previous sane state for Linux.

Signed-off-by: Dave Jiang (dave.jiang@gmail.com)

Patch in replacement of 2099/1 due to formatting problems.

Some compilers seem to get "%?" wrong in macros.

We really need to check that we have access to the whole of the
signal frame when we allocate it, rather than "most of it" when
we have iWMMXt extensions selected.

- Use ISA_DMA_THRESHOLD as the mask for GFP_DMA allocations.
- Don't allow DMA allocations which are for a "smaller" mask than
  ISA_DMA_THRESHOLD.
- Ensure that "handle" is initialised to our error value when
  returning an error.

Add locking for use of kecardd services.
Use wait_event_interruptible() rather htan interruptible_sleep_on().

Patch from Ben Dooks

Fix missing changelog entries in <asm-arm/arch-s3c2410/hardware.h>,
and erroneous EINT definitions in <asm-arm/arch-s3c2410/regs-gpio.h>.

Added s3c2410_gpio_getcfg(pin) and s3c2410_gpio_getirq(pin)
to get the current configuration of an pin, and which IRQ
(if any) maps to it.

Signed-off-by: Ben Dooks 

Patch from Ben Dooks

USB power control and over-current sense

Signed-off-by: Ben Dooks 

Patch from Ben Dooks

Port power control and management for S3C2410 internal
USB controller for different boards to interface their
power control system to.

Signed-off-by: Ben Dooks