When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console.  At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.

kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.

Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB

Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com
Fixes: d8843922 ("slab: Ignore internal flags in cache creation")
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Glauber Costa <glommer@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After building allmodconfig, there is an untracked vmlinux.lds file in
arch/hexagon/kernel:

    $ git ls-files . --exclude-standard --others
    arch/hexagon/kernel/vmlinux.lds

Ignore it as all other architectures have.

Link: https://lkml.kernel.org/r/20211115174250.1994179-4-nathan@kernel.orgSigned-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When building allmodconfig, there is a warning about TIMER_ENABLE being
redefined:

  drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined]
  #define TIMER_ENABLE            BIT(7)
          ^
  arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here
  #define TIMER_ENABLE            0
           ^
  1 error generated.

The values in this header are only used in one file each, if they are
used at all.  Remove the header and sink all of the constants into their
respective files.

TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h

TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.

SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit 71e4a47f ("Hexagon: Add time and timer
functions").

TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.

Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.orgSigned-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Fixes for ARCH=hexagon allmodconfig", v2.

This series fixes some issues noticed with ARCH=hexagon allmodconfig.

This patch (of 3):

When building ARCH=hexagon allmodconfig, the following errors occur:

  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!

Export these symbols so that modules can use them without any errors.

Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org
Fixes: 013bf24c ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After the memory is freed, it can be immediately allocated by other
CPUs, before the "free" trace report has been emitted.  This causes
inaccurate traces.

For example, if the following sequence of events occurs:

    CPU 0                 CPU 1

  (1) alloc xxxxxx
  (2) free  xxxxxx
                         (3) alloc xxxxxx
                         (4) free  xxxxxx

Then they will be inaccurately reported via tracing, so that they appear
to have happened in this order:

    CPU 0                 CPU 1

  (1) alloc xxxxxx
                         (2) alloc xxxxxx
  (3) free  xxxxxx
                         (4) free  xxxxxx

This makes it look like CPU 1 somehow managed to allocate memory that
CPU 0 still had allocated for itself.

In order to avoid this, emit the "free xxxxxx" tracing report just
before the actual call to free the memory, instead of just after it.

Link: https://lkml.kernel.org/r/374eb75d-7404-8721-4e1e-65b0e5b17279@huawei.comSigned-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, the exit_shm() function not designed to work properly when
task->sysvshm.shm_clist holds shm objects from different IPC namespaces.

This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it
leads to use-after-free (reproducer exists).

This is an attempt to fix the problem by extending exit_shm mechanism to
handle shm's destroy from several IPC ns'es.

To achieve that we do several things:

1. add a namespace (non-refcounted) pointer to the struct shmid_kernel

2. during new shm object creation (newseg()/shmget syscall) we
   initialize this pointer by current task IPC ns

3. exit_shm() fully reworked such that it traverses over all shp's in
   task->sysvshm.shm_clist and gets IPC namespace not from current task
   as it was before but from shp's object itself, then call
   shm_destroy(shp, ns).

Note: We need to be really careful here, because as it was said before
(1), our pointer to IPC ns non-refcnt'ed.  To be on the safe side we
using special helper get_ipc_ns_not_zero() which allows to get IPC ns
refcounter only if IPC ns not in the "state of destruction".

Q/A

Q: Why can we access shp->ns memory using non-refcounted pointer?
A: Because shp object lifetime is always shorther than IPC namespace
   lifetime, so, if we get shp object from the task->sysvshm.shm_clist
   while holding task_lock(task) nobody can steal our namespace.

Q: Does this patch change semantics of unshare/setns/clone syscalls?
A: No. It's just fixes non-covered case when process may leave IPC
   namespace without getting task->sysvshm.shm_clist list cleaned up.

Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com
Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com
Fixes: ab602f79 ("shm: make exit_shm work proportional to task activity")
Co-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "shm: shm_rmid_forced feature fixes".

Some time ago I met kernel crash after CRIU restore procedure,
fortunately, it was CRIU restore, so, I had dump files and could do
restore many times and crash reproduced easily.  After some
investigation I've constructed the minimal reproducer.  It was found
that it's use-after-free and it happens only if sysctl
kernel.shm_rmid_forced = 1.

The key of the problem is that the exit_shm() function not handles shp's
object destroy when task->sysvshm.shm_clist contains items from
different IPC namespaces.  In most cases this list will contain only
items from one IPC namespace.

How can this list contain object from different namespaces? The
exit_shm() function is designed to clean up this list always when
process leaves IPC namespace.  But we made a mistake a long time ago and
did not add a exit_shm() call into the setns() syscall procedures.

The first idea was just to add this call to setns() syscall but it
obviously changes semantics of setns() syscall and that's
userspace-visible change.  So, I gave up on this idea.

The first real attempt to address the issue was just to omit forced
destroy if we meet shp object not from current task IPC namespace [1].
But that was not the best idea because task->sysvshm.shm_clist was
protected by rwsem which belongs to current task IPC namespace.  It
means that list corruption may occur.

Second approach is just extend exit_shm() to properly handle shp's from
different IPC namespaces [2].  This is really non-trivial thing, I've
put a lot of effort into that but not believed that it's possible to
make it fully safe, clean and clear.

Thanks to the efforts of Manfred Spraul working an elegant solution was
designed.  Thanks a lot, Manfred!

Eric also suggested the way to address the issue in ("[RFC][PATCH] shm:
In shm_exit destroy all created and never attached segments") Eric's
idea was to maintain a list of shm_clists one per IPC namespace, use
lock-less lists.  But there is some extra memory consumption-related
concerns.

An alternative solution which was suggested by me was implemented in
("shm: reset shm_clist on setns but omit forced shm destroy").  The idea
is pretty simple, we add exit_shm() syscall to setns() but DO NOT
destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just
clean up the task->sysvshm.shm_clist list.

This chages semantics of setns() syscall a little bit but in comparision
to the "naive" solution when we just add exit_shm() without any special
exclusions this looks like a safer option.

[1] https://lkml.org/lkml/2021/7/6/1108
[2] https://lkml.org/lkml/2021/7/14/736

This patch (of 2):

Let's produce a warning if we trying to remove non-existing IPC object
from IPC namespace kht/idr structures.

This allows us to catch possible bugs when the ipc_rmid() function was
called with inconsistent struct ipc_ids*, struct kern_ipc_perm*
arguments.

Link: https://lkml.kernel.org/r/20211027224348.611025-1-alexander.mikhalitsyn@virtuozzo.com
Link: https://lkml.kernel.org/r/20211027224348.611025-2-alexander.mikhalitsyn@virtuozzo.comCo-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While free_unref_page_list() puts pages onto the CPU local LRU list, it
does not remove them from the list they were passed in on.  That makes
the list_head appear to be non-empty, and would lead to various
corruption problems if we didn't have an assertion that the list was
empty.

Reinitialise the list after calling free_unref_page_list() to avoid this
problem.

Link: https://lkml.kernel.org/r/YYp40A2lNrxaZji8@casper.infradead.org
Fixes: 988c69f1 ("mm: optimise put_pages_list()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Steve French <stfrench@microsoft.com>
Reported-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Steve French <stfrench@microsoft.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Hyeoncheol Lee <hyc.lee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull libata fixes from Damien Le Moal:

 - Prevent accesses to unsupported log pages as that causes device scan
   failures with LLDDs using libsas (from me).

 - A couple of fixes for AMD AHCI adapters handling of low power modes
   and resume (from Mario).

 - Fix a compilation warning (from me).

* tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-sata: Declare ata_ncq_sdev_attrs static
  ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
  ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
  ata: libata: add missing ata_identify_page_supported() calls
  ata: libata: improve ata_read_log_page() error message

Pull tracing fixes from Steven Rostedt:

 - Fix double free in destroy_hist_field

 - Harden memset() of trace_iterator structure

 - Do not warn in trace printk check when test buffer fills up

* tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Don't use out-of-sync va_list in event printing
  tracing: Use memset_startat() to zero struct trace_iterator
  tracing/histogram: Fix UAF in destroy_hist_field()

Merge tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix the 'local_weight', 'weight' (memory access latency),
   'local_ins_lat', 'ins_lat' (instruction latency) and 'pstage_cyc'
   (pipeline stage cycles) sort key sample aggregation.

 - Fix 'perf test' entry for watchpoints on s/390.

 - Fix branch_stack entry endianness check in the 'perf test' sample
   parsing test.

 - Fix ARM SPE handling on 'perf inject'.

 - Fix memory leaks detected with ASan.

 - Fix build on arm64 related to reallocarray() availability.

 - Sync copies of kernel headers: cpufeatures, kvm, MIPS syscalltable
   (futex_waitv).

* tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf evsel: Fix memory leaks relating to unit
  perf report: Fix memory leaks around perf_tip()
  perf hist: Fix memory leak of a perf_hpp_fmt
  tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall
  tools build: Fix removal of feature-sync-compare-and-swap feature detection
  perf inject: Fix ARM SPE handling
  perf bench: Fix two memory leaks detected with ASan
  perf test sample-parsing: Fix branch_stack entry endianness check
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf sort: Fix the 'p_stage_cyc' sort key behavior
  perf sort: Fix the 'ins_lat' sort key behavior
  perf sort: Fix the 'weight' sort key behavior
  perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1
  perf tests wp: Remove unused functions on s390
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources

Pull RISC-V fixes from Palmer Dabbelt:
 "I have two patches for 5.16:

   - allow external modules to be built against read-only source trees

   - turn KVM on in the defconfigs

  The second one isn't technically a fix, but it got tied up pending
  some defconfig cleanups that ended up finding some larger issues. I
  figured it'd be better to get the config changes some more testing,
  but didn't want to hold up turning KVM on for that"

* tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix building external modules
  RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module

Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull exit-vs-signal handling fixes from Eric Biederman:
 "This is a small set of changes where debuggers were no longer able to
  intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
  cleanups.

  This is essentially the change you suggested with all of i's dotted
  and the t's crossed so that ptrace can intercept all of the cases it
  has been able to intercept the past, and all of the cases that made it
  to exit without giving ptrace a chance still don't give ptrace a
  chance"

* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Replace force_fatal_sig with force_exit_sig when in doubt
  signal: Don't always set SA_IMMUTABLE for forced signals

Pull SCSI fixes from James Bottomley:
 "Six fixes, five in drivers (ufs, qla2xxx, iscsi) and one core change
  to fix a regression in user space device state setting, which is used
  by the iscsi daemons to effect device recovery"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id()
  scsi: ufs: core: Fix another task management completion race
  scsi: ufs: core: Fix task management completion timeout race
  scsi: core: sysfs: Fix hang when device state is set via sysfs
  scsi: iscsi: Unblock session then wake up error handler
  scsi: ufs: core: Improve SCSI abort handling

Pull rdma fixes from Jason Gunthorpe:
 "There are a few big regression items from the merge window suggesting
  that people are testing rc1's but not testing the for-next branches:

   - Warnings fixes

   - Crash in hf1 when creating QPs and setting counters

   - Some old mlx4 cards fail to probe due to missing counters

   - Syzkaller crash in the new counters code"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  MAINTAINERS: Update for VMware PVRDMA driver
  RDMA/nldev: Check stat attribute before accessing it
  RDMA/mlx4: Do not fail the registration on port stats
  IB/hfi1: Properly allocate rdma counter desc memory
  RDMA/core: Set send and receive CQ before forwarding to the driver
  RDMA/netlink: Add __maybe_unused to static inline in C file

Pull gpio fixes from Bartosz Golaszewski:

 - fix a coccicheck warning in gpio-virtio

 - fix gpio selftests build issues

 - fix a Kconfig issue in gpio-rockchip

* tag 'gpio-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors
  selftests: gpio: restore CFLAGS options
  selftests: gpio: fix uninitialised variable warning
  selftests: gpio: fix gpio compiling error
  gpio: virtio: remove unneeded semicolon

Pull drm fixes from Dave Airlie:
 "This week's fixes, pretty quiet, about right for rc2. amdgpu is the
  bulk of them but the scheduler ones have been reported in a few places
  I think.

  Otherwise just some minor i915 fixes and a few other scattered around:

  scheduler:
   - two refcounting fixes

  cma-helper:
   - use correct free path for noncoherent

  efifb:
   - probing fix

  amdgpu:
   - Better debugging info for SMU msgs
   - Better error reporting when adding IP blocks
   - Fix UVD powergating regression on CZ
   - Clock reporting fix for navi1x
   - OLED panel backlight fix
   - Fix scaling on VGA/DVI for non-DC display code
   - Fix GLFCLK handling for RGP on some APUs
   - fix potential memory leak

  amdkfd:
   - GPU reset fix

  i915:
   - return error handling fix
   - ADL-P display fix
   - TGL DSI display clocks fix

  nouveau:
   - infoframe corruption fix

  sun4i:
   - Kconfig fix"

* tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/amdgpu: fix potential memleak
  drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again
  drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs
  drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
  drm/amd/display: Fix OLED brightness control on eDP
  drm/amd/pm: Remove artificial freq level on Navi1x
  drm/amd/pm: avoid duplicate powergate/ungate setting
  drm/amdgpu: add error print when failing to add IP block(v2)
  drm/amd/pm: Enhanced reporting also for a stuck command
  drm/i915/guc: fix NULL vs IS_ERR() checking
  drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB
  Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping"
  fbdev: Prevent probing generic drivers if a FB is already registered
  drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder
  drm/scheduler: fix drm_sched_job_add_implicit_dependencies
  drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY
  drm/cma-helper: Release non-coherent memory with dma_free_noncoherent()
  drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame

When commit 5d1ceb39 ("x86: Fix __get_wchan() for !STACKTRACE")
moved from stacktrace to native unwind_*() usage, the
try_get_task_stack() got lost, leading to use-after-free issues for
dying tasks.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fixes: 5d1ceb39 ("x86: Fix __get_wchan() for !STACKTRACE")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215031
Link: https://lore.kernel.org/stable/YZV02RCRVHIa144u@fedora64.linuxtx.org/Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.

Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.

Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit.  This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.

This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.

In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig.  That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da2 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27a ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d6 ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5b ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.orgReviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.

Unfortunately this broke debuggers[1][2] which reasonably expect to be
able to trap synchronous SIGTRAP and SIGSEGV even when the target
process is not configured to handle those signals.

Update force_sig_to_task to support both the case when we can allow
the debugger to intercept and possibly ignore the signal and the case
when it is not safe to let userspace know about the signal until the
process has exited.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable@vger.kernel.org
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da2 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Link: https://lkml.kernel.org/r/877dd5qfw5.fsf_-_@email.froward.int.ebiederm.orgReviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Update maintainer info for the VMware PVRDMA driver.

Link: https://lore.kernel.org/r/1637320770-44878-1-git-send-email-bryantan@vmware.comReviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

When building external modules, vdso_prepare should not be run.  If the
kernel sources are read-only, it will fail.

Fixes: fde9c59a ("riscv: explicitly use symbol offsets for VDSO")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Let's enable KVM RISC-V in RV64 and RV32 defconfigs as module
so that it always built along with the default kernel image.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'amd-drm-fixes-5.16-2021-11-17' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.16-2021-11-17:

amdgpu:
- Better debugging info for SMU msgs
- Better error reporting when adding IP blocks
- Fix UVD powergating regression on CZ
- Clock reporting fix for navi1x
- OLED panel backlight fix
- Fix scaling on VGA/DVI for non-DC display code
- Fix GLFCLK handling for RGP on some APUs
- fix potential memory leak

amdkfd:
- GPU reset fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118041638.20831-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2021-11-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

One quick fix for return error handling, one fix for ADL-P display
and one revert targeting stable 5.4, for TGL's DSI display clocks
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YZbUPIHpR1S3JZ2b@intel.com

A infoframe corruption fix for nouveau, a wrong free function usage fix
for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for
drm/scheduler refcounting and a probing fix for efifb.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118075447.5rn6zaulnrequqnm@gilmour

If trace_seq becomes full, trace_seq_vprintf() no longer consumes
arguments from va_list, making va_list out of sync with format
processing by trace_check_vprintf().

This causes va_arg() in trace_check_vprintf() to return wrong
positional argument, which results into a WARN_ON_ONCE() hit.

ftrace_stress_test from LTP triggers this situation.

Fix it by explicitly avoiding further use if va_list at the point
when it's consistency can no longer be guaranteed.

Link: https://lkml.kernel.org/r/20211118145516.13219-1-nikita.yushchenko@virtuozzo.comSigned-off-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.

Use memset_startat() to avoid confusing memset() about writing beyond
the target struct member.

Link: https://lkml.kernel.org/r/20211118202217.1285588-1-keescook@chromium.orgSigned-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull zstd fixes from Nick Terrell:
 "Fix stack usage on parisc & improve code size bloat

  This contains three commits:

   1. Fixes a minor unused variable warning reported by Kernel test
      robot [0].

   2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
      some functions that are unlikely to be used in performance
      sensitive workloads.

   3. Fixes the reported excess stack usage on parisc [2] by removing
      -O3 from zstd's compilation flags. -O3 triggered bugs in the
      hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable:
      neutral compression, about -1% decompression speed. We also reduce
      code bloat (-105KB / 374KB).

  After this our code bloat is cut from 374KB to 105KB with gcc-11. If
  we wanted to cut the remaining 105KB we'd likely have to trade
  signicant performance, so I want to say that this is enough for now.

  We should be able to get further gains without sacrificing speed, but
  that will take some significant optimization effort, and isn't
  suitable for a quick fix. I've opened an upstream issue [3] to track
  the code size, and try to avoid future regressions, and improve it in
  the long term"

Link: https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [0]
Link: https://lkml.org/lkml/2021/11/15/710 [1]
Link: https://lkml.org/lkml/2021/11/14/189 [2]
Link: https://github.com/facebook/zstd/issues/2867 [3]
Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/

* tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux:
  lib: zstd: Don't add -O3 to cflags
  lib: zstd: Don't inline functions in zstd_opt.c
  lib: zstd: Fix unused variable warning

Pull thermal control fixes from Rafael Wysocki:
 "These fix the handling of thermal zones during system resume and
  disable building of the int340x thermal driver on 32-bit.

  Specifics:

   - Prevent the previous high and low thermal zone trip values from
     being retained over a system suspend-resume cycle (Manaf
     Meethalavalappu Pallikunhi)

   - Prevent the int340x thermal driver from being built in 32-bit
     kernel configurations, because running it on 32-bit is questionable
     (Arnd Bergmann)"

* tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Reset previous low and high trip during thermal zone init
  thermal: int340x: Limit Kconfig to 64-bit

Pull power management fixes from Rafael Wysocki:
 "These fix a system-wide suspend issue in the DTPM framework and
  improve the Energy Model documentation.

  Specifics:

   - Fix system suspend handling in DTPM when it is enabled, but not
     actually used (Daniel Lezcano)

   - Describe the new cpufreq callback for Energy Model registration and
     explain the "advanced" and "simple" EM variants in the EM
     documentation (Lukasz Luba)"

* tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Documentation: power: Describe 'advanced' and 'simple' EM models
  Documentation: power: Add description about new callback for EM registration
  powercap: DTPM: Fix suspend failure and kernel warning

Pull ACPI fix from Rafael Wysocki:
 "Revert the change attempting to release PM resources blocked by unused
  ACPI objects after device enumeration, because it caused boot issues
  to appear on multiple systems"

* tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: scan: Release PM resources blocked by unused objects"

Merge tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Various build- and bug-fixes as well as one hardware-id addition"

* tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard
  platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep
  platform/x86: thinkpad_acpi: Add support for dual fan control
  platform/x86: think-lmi: Abort probe on analyze failure
  platform/x86: dell-wmi-descriptor: disable by default
  platform/x86: samsung-laptop: Fix typo in a comment
  platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
  platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS
  platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()

Pull spi fixes from Mark Brown:
 "A few small fixes for v5.16, one in the core for an issue with
  handling of controller unregistration that was introduced with the
  fixes for registering nested SPI controllers and a few more minor
  device specific ones"

* tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix use-after-free of the add_lock mutex
  spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()
  spi: lpspi: Silence error message upon deferred probe
  spi: cadence-quadspi: fix write completion support

After the update to zstd-1.4.10 passing -O3 is no longer necessary to
get good performance from zstd. Using the default optimization level -O2
is sufficient to get good performance.

I've measured no significant change to compression speed, and a ~1%
decompression speed loss, which is acceptable.

This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The
gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating
stacks that are ~3KB. With -O2 these same functions generate stacks in
the < 100B, completely fixing the problem. Function size deltas are
listed below:

ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68
ZSTD_compressBlock_fast: 2216 -> 40
ZSTD_compressBlock_fast_dictMatchState: 1848 ->  64
ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76
ZSTD_fillDoubleHashTable: 3252 -> 0
ZSTD_compressBlock_doubleFast: 5856 -> 36
ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84
ZSTD_copmressBlock_lazy2: 2420 -> 72

Additionally, this improves the reported code bloat [1]. With gcc-11
bloat-o-meter shows an 80KB code size improvement:

```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190)
Total: Before=6418562, After=6336372, chg -1.28%
```

Compared to before the zstd-1.4.10 update we see a total code size
regression of 105KB, down from 374KB at v5.16-rc1:

```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522)
Total: Before=6228850, After=6336372, chg +1.73%
```

[0] https://lkml.org/lkml/2021/11/15/710
[1] https://lkml.org/lkml/2021/11/14/189

Link: https://lore.kernel.org/r/20211117014949.1169186-4-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-4-nickrterrell@gmail.com/Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>

`zstd_opt.c` contains the match finder for the highest compression
levels. These levels are already very slow, and are unlikely to be used
in the kernel. If they are used, they shouldn't be used in latency
sensitive workloads, so slowing them down shouldn't be a big deal.

This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0].
I've also opened an issue upstream [1] so that we can properly tackle
the code size issue in `zstd_opt.c` for all users, and can hopefully
remove this hack in the next zstd version we import.

Bloat-o-meter output on x86-64:

```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266)
Function                                     old     new   delta
ZSTD_compressBlock_opt_generic.constprop       -    7559   +7559
ZSTD_insertBtAndGetAllMatches                  -    6304   +6304
ZSTD_insertBt1                                 -    1731   +1731
ZSTD_storeSeq                                  -     693    +693
ZSTD_BtGetAllMatches                           -     255    +255
ZSTD_updateRep                                 -     128    +128
ZSTD_updateTree                               96      99      +3
ZSTD_insertAndFindFirstIndexHash3             81       -     -81
ZSTD_setBasePrices.constprop                  98       -     -98
ZSTD_litLengthPrice.constprop                138       -    -138
ZSTD_count                                   362     181    -181
ZSTD_count_2segments                        1407     938    -469
ZSTD_insertBt1.constprop                    2689       -   -2689
ZSTD_compressBlock_btultra2                19990     423  -19567
ZSTD_compressBlock_btultra                 19633      15  -19618
ZSTD_initStats_ultra                       19825       -  -19825
ZSTD_compressBlock_btopt                   20374      12  -20362
ZSTD_compressBlock_btopt_extDict           29984      12  -29972
ZSTD_compressBlock_btultra_extDict         30718      15  -30703
ZSTD_compressBlock_btopt_dictMatchState    32689      12  -32677
ZSTD_compressBlock_btultra_dictMatchState   33574      15  -33559
Total: Before=6611828, After=6418562, chg -2.92%
```

[0] https://lkml.org/lkml/2021/11/14/189
[1] https://github.com/facebook/zstd/issues/2862

Link: https://lore.kernel.org/r/20211117014949.1169186-3-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-3-nickrterrell@gmail.com/Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>

The variable `litLengthSum` is only used by an `assert()`, so when
asserts are disabled the compiler doesn't see any usage and warns.

This issue is already fixed upstream by PR #2838 [0]. It was reported
by the Kernel test robot in [1].

Another approach would be to change zstd's disabled `assert()`
definition to use the argument in a disabled branch, instead of
ignoring the argument. I've avoided this approach because there are
some small changes necessary to get zstd to build, and I would
want to thoroughly re-test for performance, since that is slightly
changing the code in every function in zstd. It seems like a
trivial change, but some functions are pretty sensitive to small
changes. However, I think it is a valid approach that I would
like to see upstream take, so I've opened Issue #2868 to attempt
this upstream.

Lastly, I've chosen not to use __maybe_unused because all code
in lib/zstd/ must eventually be upstreamed. Upstream zstd can't
use __maybe_unused because it isn't portable across all compilers.

[0] https://github.com/facebook/zstd/pull/2838
[1] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/
[2] https://github.com/facebook/zstd/issues/2868

Link: https://lore.kernel.org/r/20211117014949.1169186-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-2-nickrterrell@gmail.com/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nick Terrell <terrelln@fb.com>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, mac80211.

  Current release - regressions:

   - devlink: don't throw an error if flash notification sent before
     devlink visible

   - page_pool: Revert "page_pool: disable dma mapping support...",
     turns out there are active arches who need it

  Current release - new code bugs:

   - amt: cancel delayed_work synchronously in amt_fini()

  Previous releases - regressions:

   - xsk: fix crash on double free in buffer pool

   - bpf: fix inner map state pruning regression causing program
     rejections

   - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
     preventing mis-selecting the best effort queue

   - mac80211: do not access the IV when it was stripped

   - mac80211: fix radiotap header generation, off-by-one

   - nl80211: fix getting radio statistics in survey dump

   - e100: fix device suspend/resume

  Previous releases - always broken:

   - tcp: fix uninitialized access in skb frags array for Rx 0cp

   - bpf: fix toctou on read-only map's constant scalar tracking

   - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
     progs

   - tipc: only accept encrypted MSG_CRYPTO msgs

   - smc: transfer remaining wait queue entries during fallback, fix
     missing wake ups

   - udp: validate checksum in udp_read_sock() (when sockmap is used)

   - sched: act_mirred: drop dst for the direction from egress to
     ingress

   - virtio_net_hdr_to_skb: count transport header in UFO, prevent
     allowing bad skbs into the stack

   - nfc: reorder the logic in nfc_{un,}register_device, fix unregister

   - ipsec: check return value of ipv6_skip_exthdr

   - usb: r8152: add MAC passthrough support for more Lenovo Docks"

* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
  ptp: ocp: Fix a couple NULL vs IS_ERR() checks
  net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
  net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
  ipv6: check return value of ipv6_skip_exthdr
  e100: fix device suspend/resume
  devlink: Don't throw an error if flash notification sent before devlink visible
  page_pool: Revert "page_pool: disable dma mapping support..."
  ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
  octeontx2-af: debugfs: don't corrupt user memory
  NFC: add NCI_UNREG flag to eliminate the race
  NFC: reorder the logic in nfc_{un,}register_device
  NFC: reorganize the functions in nci_request
  tipc: check for null after calling kmemdup
  i40e: Fix display error code in dmesg
  i40e: Fix creation of first queue by omitting it if is not power of two
  i40e: Fix warning message and call stack during rmmod i40e driver
  i40e: Fix ping is lost after configuring ADq on VF
  i40e: Fix changing previously set num_queue_pairs for PFs
  i40e: Fix NULL ptr dereference on VSI filter sync
  i40e: Fix correct max_pkt_size on VF RX queue
  ...

Pull btrfs fixes from David Sterba:
 "Several xes and one old ioctl deprecation. Namely there's fix for
  crashes/warnings with lzo compression that was suspected to be caused
  by first pull merge resolution, but it was a different bug.

  Summary:

   - regression fix for a crash in lzo due to missing boundary checks of
     the page array

   - fix crashes on ARM64 due to missing barriers when synchronizing
     status bits between work queues

   - silence lockdep when reading chunk tree during mount

   - fix false positive warning in integrity checker on devices with
     disabled write caching

   - fix signedness of bitfields in scrub

   - start deprecation of balance v1 ioctl"

* tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: deprecate BTRFS_IOC_BALANCE ioctl
  btrfs: make 1-bit bit-fields of scrub_page unsigned int
  btrfs: check-integrity: fix a warning on write caching disabled disk
  btrfs: silence lockdep when reading chunk tree during mount
  btrfs: fix memory ordering between normal and ordered work functions
  btrfs: fix a out-of-bound access in copy_compressed_data_to_page()

Pull UDF fix from Jan Kara:
 "A fix for a long-standing UDF bug where we were not properly
  validating directory position inside readdir"

* tag 'fs_for_v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix crash after seekdir