- 16 Mar, 2021 3 commits
-
-
David Sterba authored
The free space tree bitmap slab cache is created with SLAB_RED_ZONE but that's a debugging flag and not always enabled. Also the other slabs are created with at least SLAB_MEM_SPREAD that we want as well to average the memory placement cost. Reported-by:
Vlastimil Babka <vbabka@suse.cz> Fixes: 3acd4850 ("btrfs: fix allocation of free space cache v1 bitmap pages") CC: stable@vger.kernel.org # 5.4+ Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
In readahead infrastructure, we are using a lot of hard coded PAGE_SHIFT while we're not doing anything specific to PAGE_SIZE. One of the most affected part is the radix tree operation of btrfs_fs_info::reada_tree. If using PAGE_SHIFT, subpage metadata readahead is broken and does no help reading metadata ahead. Fix the problem by using btrfs_fs_info::sectorsize_bits so that readahead could work for subpage. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
[BUG] When running fstests for btrfs subpage read-write test, it has a very high chance to crash at generic/475 with the following stack: BTRFS warning (device dm-8): direct IO failed ino 510 rw 1,34817 sector 0xcdf0 len 94208 err no 10 Unable to handle kernel paging request at virtual address ffff80001157e7c0 CPU: 2 PID: 687125 Comm: kworker/u12:4 Tainted: G WC 5.12.0-rc2-custom+ #5 Hardware name: Khadas VIM3 (DT) Workqueue: btrfs-endio-meta btrfs_work_helper [btrfs] pc : queued_spin_lock_slowpath+0x1a0/0x390 lr : do_raw_spin_lock+0xc4/0x11c Call trace: queued_spin_lock_slowpath+0x1a0/0x390 _raw_spin_lock+0x68/0x84 btree_readahead_hook+0x38/0xc0 [btrfs] end_bio_extent_readpage+0x504/0x5f4 [btrfs] bio_endio+0x170/0x1a4 end_workqueue_fn+0x3c/0x60 [btrfs] btrfs_work_helper+0x1b0/0x1b4 [btrfs] process_one_work+0x22c/0x430 worker_thread+0x70/0x3a0 kthread+0x13c/0x140 ret_from_fork+0x10/0x30 Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827) [CAUSE] In end_bio_extent_readpage(), if we hit an error during read, we will handle the error differently for data and metadata. For data we queue a repair, while for metadata, we record the error and let the caller choose what to do. But the code is still using page->private to grab extent buffer, which no longer points to extent buffer for subpage metadata pages. Thus this wild pointer access leads to above crash. [FIX] Introduce a helper, find_extent_buffer_readpage(), to grab extent buffer. The difference against find_extent_buffer_nospinlock() is: - Also handles regular sectorsize == PAGE_SIZE case - No extent buffer refs increase/decrease As extent buffer under IO must have non-zero refs, so this is safe Signed-off-by:
-
- 15 Mar, 2021 4 commits
-
-
Filipe Manana authored
When using a zoned filesystem, while syncing the log, if we fail to allocate the root node for the log root tree, we are not removing the log context we allocated on stack from the list of log contexts of the log root tree. This means after the return from btrfs_sync_log() we get a corrupted linked list. Fix this by allocating the node before adding our stack allocated context to the list of log contexts of the log root tree. Fixes: 3ddebf27 ("btrfs: zoned: reorder log node allocation on zoned filesystem") Reviewed-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Qu Wenruo authored
[BUG] When running fsstress with only falloc workload, and a very low qgroup limit set, we can get qgroup data rsv leak at unmount time. BTRFS warning (device dm-0): qgroup 0/5 has unreleased space, type 0 rsv 20480 BTRFS error (device dm-0): qgroup reserved space leaked The minimal reproducer looks like: #!/bin/bash dev=/dev/test/test mnt="/mnt/btrfs" fsstress=~/xfstests-dev/ltp/fsstress runtime=8 workload() { umount $dev &> /dev/null umount $mnt &> /dev/null mkfs.btrfs -f $dev > /dev/null mount $dev $mnt btrfs quota en $mnt btrfs quota rescan -w $mnt btrfs qgroup limit 16m 0/5 $mnt $fsstress -w -z -f creat=10 -f fallocate=10 -p 2 -n 100 \ -d $mnt -v > /tmp/fsstress umount $mnt if dmesg | grep leak ; then echo "!!! FAILED !!!" exit 1 fi } for (( i=0; i < $runtime; i++)); do echo "=== $i/$runtime===" workload done Normally it would fail before round 4. [CAUSE] In function insert_prealloc_file_extent(), we first call btrfs_qgroup_release_data() to know how many bytes are reserved for qgroup data rsv. Then use that @qgroup_released number to continue our work. But after we call btrfs_qgroup_release_data(), we should either queue @qgroup_released to delayed ref or free them manually in error path. Unfortunately, we lack the error handling to free the released bytes, leaking qgroup data rsv. All the error handling function outside won't help at all, as we have released the range, meaning in inode io tree, the EXTENT_QGROUP_RESERVED bit is already cleared, thus all btrfs_qgroup_free_data() call won't free any data rsv. [FIX] Add free_qgroup tag to manually free the released qgroup data rsv. Reported-by:Nikolay Borisov <nborisov@suse.com> Reported-by:
David Sterba <dsterba@suse.cz> Fixes: 9729f10a ("btrfs: inode: move qgroup reserved space release to the callers of insert_reserved_file_extent()") CC: stable@vger.kernel.org # 5.10+ Signed-off-by:
-
Qu Wenruo authored
There is a piece of weird code in insert_prealloc_file_extent(), which looks like: ret = btrfs_qgroup_release_data(inode, file_offset, len); if (ret < 0) return ERR_PTR(ret); if (trans) { ret = insert_reserved_file_extent(trans, inode, file_offset, &stack_fi, true, ret); ... } extent_info.is_new_extent = true; extent_info.qgroup_reserved = ret; ... Note how the variable @ret is abused here, and if anyone is adding code just after btrfs_qgroup_release_data() call, it's super easy to overwrite the @ret and cause tons of qgroup related bugs. Fix such abuse by introducing new variable @qgroup_released, so that we won't reuse the existing variable @ret. Signed-off-by: -
Qu Wenruo authored
[BUG] The test generic/091 fails , with the following output: fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -W mapped writes DISABLED Seed set to 1 main: filesystem does not support fallocate mode FALLOC_FL_COLLAPSE_RANGE, disabling! main: filesystem does not support fallocate mode FALLOC_FL_INSERT_RANGE, disabling! skipping zero size read truncating to largest ever: 0xe400 copying to largest ever: 0x1f400 cloning to largest ever: 0x70000 cloning to largest ever: 0x77000 fallocating to largest ever: 0x7a120 Mapped Read: non-zero data past EOF (0x3a7ff) page offset 0x800 is 0xf2e1 <<< ... [CAUSE] In commit c28ea613 ("btrfs: subpage: fix the false data csum mismatch error") end_bio_extent_readpage() changes to only zero the range inside the bvec for incoming subpage support. But that commit is using incorrect offset to calculate the start. For subpage, we can have a case that the whole bvec is beyond isize, thus we need to calculate the correct offset. But the offending commit is using @end (bvec end), other than @start (bvec start) to calculate the start offset. This means, we only zero the last byte of the bvec, not from the isize. This stupid bug makes the range beyond isize is not properly zeroed, and failed above test. [FIX] Use correct @start to calculate the range start. Reported-by:
kernel test robot <oliver.sang@intel.com> Fixes: c28ea613 ("btrfs: subpage: fix the false data csum mismatch error") Signed-off-by:
-
- 04 Mar, 2021 2 commits
-
-
Naohiro Aota authored
We migrate zone unusable bytes to read-only bytes when a block group is set to read-only, and account all the free region as bytes_readonly. Thus, we should not increase block_group->zone_unusable when the block group is read-only. Fixes: 169e0da9 ("btrfs: zoned: track unusable bytes for zones") Reviewed-by:
-
Naohiro Aota authored
We need to use sector_t for zone_sectors, or it would set the zone size to zero when the size >= 4GB (= 2^24 sectors) by shifting the zone_sectors value by SECTOR_SHIFT. We're assuming zones sizes up to 8GiB. Fixes: 5b316468 ("btrfs: get zone information of zoned block devices") Reviewed-by:
-
- 02 Mar, 2021 9 commits
-
-
Qu Wenruo authored
[BUG] When running fstresss, we can hit strange data csum mismatch where the on-disk data is in fact correct (passes scrub). With some extra debug info added, we have the following traces: 0482us: btrfs_do_readpage: root=5 ino=284 offset=393216, submit force=0 pgoff=0 iosize=8192 0494us: btrfs_do_readpage: root=5 ino=284 offset=401408, submit force=0 pgoff=8192 iosize=4096 0498us: btrfs_submit_data_bio: root=5 ino=284 bio first bvec=393216 len=8192 0591us: btrfs_do_readpage: root=5 ino=284 offset=405504, submit force=0 pgoff=12288 iosize=36864 0594us: btrfs_submit_data_bio: root=5 ino=284 bio first bvec=401408 len=4096 0863us: btrfs_submit_data_bio: root=5 ino=284 bio first bvec=405504 len=36864 0933us: btrfs_verify_data_csum: root=5 ino=284 offset=393216 len=8192 0967us: btrfs_do_readpage: root=5 ino=284 offset=442368, skip beyond isize pgoff=49152 iosize=16384 1047us: btrfs_verify_data_csum: root=5 ino=284 offset=401408 len=4096 1163us: btrfs_verify_data_csum: root=5 ino=284 offset=405504 len=36864 1290us: check_data_csum: !!! root=5 ino=284 offset=438272 pg_off=45056 !!! 7387us: end_bio_extent_readpage: root=5 ino=284 before pending_read_bios=0 [CAUSE] Normally we expect all submitted bio reads to only touch the range we specified, and under subpage context, it means we should only touch the range specified in each bvec. But in data read path, inside end_bio_extent_readpage(), we have page zeroing which only takes regular page size into consideration. This means for subpage if we have an inode whose content looks like below: 0 16K 32K 48K 64K |///////| |///////| | |//| = data needs to be read from disk | | = hole And i_size is 64K initially. Then the following race can happen: T1 | T2 --------------------------------+-------------------------------- btrfs_do_readpage() | |- isize = 64K; | | At this time, the isize is | | 64K | | | |- submit_extent_page() | | submit previous assembled bio| | assemble bio for [0, 16K) | | | |- submit_extent_page() | submit read bio for [0, 16K) | assemble read bio for | [32K, 48K) | | | btrfs_setsize() | |- i_size_write(, 16K); | Now i_size is only 16K end_io() for [0K, 16K) | |- end_bio_extent_readpage() | |- btrfs_verify_data_csum() | | No csum error | |- i_size = 16K; | |- zero_user_segment(16K, | PAGE_SIZE); | !!! We zeroed range | !!! [32K, 48K) | | end_io for [32K, 48K) | |- end_bio_extent_readpage() | |- btrfs_verify_data_csum() | ! CSUM MISMATCH ! | ! As the range is zeroed now ! [FIX] To fix the problem, make end_bio_extent_readpage() to only zero the range of bvec. The bug only affects subpage read-write support, as for full read-only mount we can't change i_size thus won't hit the race condition. Signed-off-by: -
Filipe Manana authored
When we have smack enabled, during the creation of a directory smack may attempt to add a "smack transmute" xattr on the inode, which results in the following warning and trace: WARNING: CPU: 3 PID: 2548 at fs/btrfs/transaction.c:537 start_transaction+0x489/0x4f0 Modules linked in: nft_objref nf_conntrack_netbios_ns (...) CPU: 3 PID: 2548 Comm: mkdir Not tainted 5.9.0-rc2smack+ #81 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:start_transaction+0x489/0x4f0 Code: e9 be fc ff ff (...) RSP: 0018:ffffc90001887d10 EFLAGS: 00010202 RAX: ffff88816f1e0000 RBX: 0000000000000201 RCX: 0000000000000003 RDX: 0000000000000201 RSI: 0000000000000002 RDI: ffff888177849000 RBP: ffff888177849000 R08: 0000000000000001 R09: 0000000000000004 R10: ffffffff825e8f7a R11: 0000000000000003 R12: ffffffffffffffe2 R13: 0000000000000000 R14: ffff88803d884270 R15: ffff8881680d8000 FS: 00007f67317b8440(0000) GS:ffff88817bcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f67247a22a8 CR3: 000000004bfbc002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? slab_free_freelist_hook+0xea/0x1b0 ? trace_hardirqs_on+0x1c/0xe0 btrfs_setxattr_trans+0x3c/0xf0 __vfs_setxattr+0x63/0x80 smack_d_instantiate+0x2d3/0x360 security_d_instantiate+0x29/0x40 d_instantiate_new+0x38/0x90 btrfs_mkdir+0x1cf/0x1e0 vfs_mkdir+0x14f/0x200 do_mkdirat+0x6d/0x110 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f673196ae6b Code: 8b 05 11 (...) RSP: 002b:00007ffc3c679b18 EFLAGS: 00000246 ORIG_RAX: 0000000000000053 RAX: ffffffffffffffda RBX: 00000000000001ff RCX: 00007f673196ae6b RDX: 0000000000000000 RSI: 00000000000001ff RDI: 00007ffc3c67a30d RBP: 00007ffc3c67a30d R08: 00000000000001ff R09: 0000000000000000 R10: 000055d3e39fe930 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc3c679cd8 R14: 00007ffc3c67a30d R15: 00007ffc3c679ce0 irq event stamp: 11029 hardirqs last enabled at (11037): [<ffffffff81153fe6>] console_unlock+0x486/0x670 hardirqs last disabled at (11044): [<ffffffff81153c01>] console_unlock+0xa1/0x670 softirqs last enabled at (8864): [<ffffffff81e0102f>] asm_call_on_stack+0xf/0x20 softirqs last disabled at (8851): [<ffffffff81e0102f>] asm_call_on_stack+0xf/0x20 This happens because at btrfs_mkdir() we call d_instantiate_new() while holding a transaction handle, which results in the following call chain: btrfs_mkdir() trans = btrfs_start_transaction(root, 5); d_instantiate_new() smack_d_instantiate() __vfs_setxattr() btrfs_setxattr_trans() btrfs_start_transaction() start_transaction() WARN_ON() --> a tansaction start has TRANS_EXTWRITERS set in its type h->orig_rsv = h->block_rsv h->block_rsv = NULL btrfs_end_transaction(trans) Besides the warning triggered at start_transaction, we set the handle's block_rsv to NULL which may cause some surprises later on. So fix this by making btrfs_setxattr_trans() not start a transaction when we already have a handle on one, stored in current->journal_info, and use that handle. We are good to use the handle because at btrfs_mkdir() we did reserve space for the xattr and the inode item. Reported-by:Casey Schaufler <casey@schaufler-ca.com> CC: stable@vger.kernel.org # 5.4+ Acked-by:
-
Nikolay Borisov authored
Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070e ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277a ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e9653 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: stable@vger.kernel.org # 5.10+ Reviewed-by:
-
Nikolay Borisov authored
Signed-off-by:
-
Nikolay Borisov authored
Following commit f218ea6c ("btrfs: delayed-inode: Remove wrong qgroup meta reservation calls") this function now reserves num_bytes, rather than the fixed amount of nodesize. As such this requires the same amount to be freed in case of failure. Fix this by adjusting the amount we are freeing. Fixes: f218ea6c ("btrfs: delayed-inode: Remove wrong qgroup meta reservation calls") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
-
Boris Burkov authored
The intended logic of the check is to catch cases where the desired free_space_tree setting doesn't match the mounted setting, and the remount is anything but ro->rw. However, it makes the mistake of checking equality on a masked integer (btrfs_test_opt) against a boolean (btrfs_fs_compat_ro). If you run the reproducer: $ mount -o space_cache=v2 dev mnt $ mount -o remount,ro mnt you would expect no warning, because the remount is not attempting to change the free space tree setting, but we do see the warning. To fix this, add explicit bool type casts to the condition. I tested a variety of transitions: sudo mount -o space_cache=v2 /dev/vg0/lv0 mnt/lol (fst enabled) mount -o remount,ro mnt/lol (no warning, no fst change) sudo mount -o remount,rw,space_cache=v1,clear_cache (no warning, ro->rw) sudo mount -o remount,rw,space_cache=v2 mnt (warning, rw->rw with change) sudo mount -o remount,ro mnt (no warning, no fst change) sudo mount -o remount,rw,space_cache=v2 mnt (no warning, no fst change) Reported-by:
Chris Murphy <lists@colorremedies.com> CC: stable@vger.kernel.org # 5.11 Signed-off-by:
Boris Burkov <boris@bur.io> Reviewed-by:
-
Dan Carpenter authored
The problem is we're copying "inherit" from user space but we don't necessarily know that we're copying enough data for a 64 byte struct. Then the next problem is that 'inherit' has a variable size array at the end, and we have to verify that array is the size we expected. Fixes: 6f72c7e2 ("Btrfs: add qgroup inheritance") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Nikolay Borisov authored
If btrfs_qgroup_reserve_data returns an error (i.e quota limit reached) the handling logic directly goes to the 'out' label without first unlocking the extent range between lockstart, lockend. This results in deadlocks as other processes try to lock the same extent. Fixes: a7f8b1c2 ("btrfs: file: reserve qgroup space after the hole punch range is locked") CC: stable@vger.kernel.org # 5.10+ Reviewed-by:
-
Randy Dunlap authored
Fix build warnings of function signature when CONFIG_STACKTRACE is not enabled by reordering the 'inline' and 'void' keywords. ../fs/btrfs/ref-verify.c:221:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static void inline __save_stack_trace(struct ref_action *ra) ../fs/btrfs/ref-verify.c:225:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static void inline __print_stack_trace(struct btrfs_fs_info *fs_info, Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
- 22 Feb, 2021 11 commits
-
-
Johannes Thumshirn authored
Lockdep with fstests test case btrfs/041 detected a unsafe locking scenario when we allocate the log node on a zoned filesystem. btrfs/041 ============================================ WARNING: possible recursive locking detected 5.11.0-rc7+ #939 Not tainted -------------------------------------------- xfs_io/698 is trying to acquire lock: ffff88810cd673a0 (&root->log_mutex){+.+.}-{3:3}, at: btrfs_sync_log+0x3d1/0xee0 [btrfs] but task is already holding lock: ffff88810b0fc3a0 (&root->log_mutex){+.+.}-{3:3}, at: btrfs_sync_log+0x313/0xee0 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&root->log_mutex); lock(&root->log_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by xfs_io/698: #0: ffff88810cd66620 (sb_internal){.+.+}-{0:0}, at: btrfs_sync_file+0x2c3/0x570 [btrfs] #1: ffff88810b0fc3a0 (&root->log_mutex){+.+.}-{3:3}, at: btrfs_sync_log+0x313/0xee0 [btrfs] stack backtrace: CPU: 0 PID: 698 Comm: xfs_io Not tainted 5.11.0-rc7+ #939 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack+0x77/0x97 __lock_acquire.cold+0xb9/0x32a lock_acquire+0xb5/0x400 ? btrfs_sync_log+0x3d1/0xee0 [btrfs] __mutex_lock+0x7b/0x8d0 ? btrfs_sync_log+0x3d1/0xee0 [btrfs] ? btrfs_sync_log+0x3d1/0xee0 [btrfs] ? find_first_extent_bit+0x9f/0x100 [btrfs] ? __mutex_unlock_slowpath+0x35/0x270 btrfs_sync_log+0x3d1/0xee0 [btrfs] btrfs_sync_file+0x3a8/0x570 [btrfs] __x64_sys_fsync+0x34/0x60 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens, because we are taking the ->log_mutex albeit it has already been locked. Also while at it, fix the bogus unlock of the tree_log_mutex in the error handling. Fixes: 3ddebf27 ("btrfs: zoned: reorder log node allocation on zoned filesystem") Reviewed-by: -
Josef Bacik authored
It's wrong calling btrfs_put_block_group in __btrfs_return_cluster_to_free_space if the block group passed is different than the block group the cluster represents. As this means the cluster doesn't have a reference to the passed block group. This results in double put and a use-after-free bug. Fix this by simply bailing if the block group we passed in does not match the block group on the cluster. Fixes: fa9c0d79 ("Btrfs: rework allocation clustering") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Filipe Manana authored
When using the NO_HOLES feature, if we clone a file range that spans only a hole into a range that is at or beyond the current i_size of the destination file, we end up not setting the full sync runtime flag on the inode. As a result, if we then fsync the destination file and have a power failure, after log replay we can end up exposing stale data instead of having a hole for that range. The conditions for this to happen are the following: 1) We have a file with a size of, for example, 1280K; 2) There is a written (non-prealloc) extent for the file range from 1024K to 1280K with a length of 256K; 3) This particular file extent layout is durably persisted, so that the existing superblock persisted on disk points to a subvolume root where the file has that exact file extent layout and state; 4) The file is truncated to a smaller size, to an offset lower than the start offset of its last extent, for example to 800K. The truncate sets the full sync runtime flag on the inode; 6) Fsync the file to log it and clear the full sync runtime flag; 7) Clone a region that covers only a hole (implicit hole due to NO_HOLES) into the file with a destination offset that starts at or beyond the 256K file extent item we had - for example to offset 1024K; 8) Since the clone operation does not find extents in the source range, we end up in the if branch at the bottom of btrfs_clone() where we punch a hole for the file range starting at offset 1024K by calling btrfs_replace_file_extents(). There we end up not setting the full sync flag on the inode, because we don't know we are being called in a clone context (and not fallocate's punch hole operation), and neither do we create an extent map to represent a hole because the requested range is beyond eof; 9) A further fsync to the file will be a fast fsync, since the clone operation did not set the full sync flag, and therefore it relies on modified extent maps to correctly log the file layout. But since it does not find any extent map marking the range from 1024K (the previous eof) to the new eof, it does not log a file extent item for that range representing the hole; 10) After a power failure no hole for the range starting at 1024K is punched and we end up exposing stale data from the old 256K extent. Turning this into exact steps: $ mkfs.btrfs -f -O no-holes /dev/sdi $ mount /dev/sdi /mnt # Create our test file with 3 extents of 256K and a 256K hole at offset # 256K. The file has a size of 1280K. $ xfs_io -f -s \ -c "pwrite -S 0xab -b 256K 0 256K" \ -c "pwrite -S 0xcd -b 256K 512K 256K" \ -c "pwrite -S 0xef -b 256K 768K 256K" \ -c "pwrite -S 0x73 -b 256K 1024K 256K" \ /mnt/sdi/foobar # Make sure it's durably persisted. We want the last committed super # block to point to this particular file extent layout. sync # Now truncate our file to a smaller size, falling within a position of # the second extent. This sets the full sync runtime flag on the inode. # Then fsync the file to log it and clear the full sync flag from the # inode. The third extent is no longer part of the file and therefore # it is not logged. $ xfs_io -c "truncate 800K" -c "fsync" /mnt/foobar # Now do a clone operation that only clones the hole and sets back the # file size to match the size it had before the truncate operation # (1280K). $ xfs_io \ -c "reflink /mnt/foobar 256K 1024K 256K" \ -c "fsync" \ /mnt/foobar # File data before power failure: $ od -A d -t x1 /mnt/foobar 0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab * 0262144 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0524288 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd * 0786432 ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef * 0819200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 1310720 <power fail> # Mount the fs again to replay the log tree. $ mount /dev/sdi /mnt # File data after power failure: $ od -A d -t x1 /mnt/foobar 0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab * 0262144 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0524288 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd * 0786432 ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef * 0819200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 1048576 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 * 1310720 The range from 1024K to 1280K should correspond to a hole but instead it points to stale data, to the 256K extent that should not exist after the truncate operation. The issue does not exists when not using NO_HOLES, because for that case we use file extent items to represent holes, these are found and copied during the loop that iterates over extents at btrfs_clone(), and that causes btrfs_replace_file_extents() to be called with a non-NULL extent_info argument and therefore set the full sync runtime flag on the inode. So fix this by making the code that deals with a trailing hole during cloning, at btrfs_clone(), to set the full sync flag on the inode, if the range starts at or beyond the current i_size. A test case for fstests will follow soon. Backporting notes: for kernel 5.4 the change goes to ioctl.c into btrfs_clone before the last call to btrfs_punch_hole_range. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: -
Josef Bacik authored
The tree checker checks the extent ref hash at read and write time to make sure we do not corrupt the file system. Generally extent references go inline, but if we have enough of them we need to make an item, which looks like key.objectid = <bytenr> key.type = <BTRFS_EXTENT_DATA_REF_KEY|BTRFS_TREE_BLOCK_REF_KEY> key.offset = hash(tree, owner, offset) However if key.offset collide with an unrelated extent reference we'll simply key.offset++ until we get something that doesn't collide. Obviously this doesn't match at tree checker time, and thus we error while writing out the transaction. This is relatively easy to reproduce, simply do something like the following xfs_io -f -c "pwrite 0 1M" file offset=2 for i in {0..10000} do xfs_io -c "reflink file 0 ${offset}M 1M" file offset=$(( offset + 2 )) done xfs_io -c "reflink file 0 17999258914816 1M" file xfs_io -c "reflink file 0 35998517829632 1M" file xfs_io -c "reflink file 0 53752752058368 1M" file btrfs filesystem sync And the sync will error out because we'll abort the transaction. The magic values above are used because they generate hash collisions with the first file in the main subvol. The fix for this is to remove the hash value check from tree checker, as we have no idea which offset ours should belong to. Reported-by:Tuomas Lähdekorpi <tuomas.lahdekorpi@gmail.com> Fixes: 0785a9aa ("btrfs: tree-checker: Add EXTENT_DATA_REF check") CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
-
Filipe Manana authored
When creating a snapshot we check if the current number of swap files, in the root, is non-zero, and if it is, we error out and warn that we can not create the snapshot because there are active swap files. However this is racy because when a task started activation of a swap file, another task might have started already snapshot creation and might have seen the counter for the number of swap files as zero. This means that after the swap file is activated we may end up with a snapshot of the same root successfully created, and therefore when the first write to the swap file happens it has to fall back into COW mode, which should never happen for active swap files. Basically what can happen is: 1) Task A starts snapshot creation and enters ioctl.c:create_snapshot(). There it sees that root->nr_swapfiles has a value of 0 so it continues; 2) Task B enters btrfs_swap_activate(). It is not aware that another task started snapshot creation but it did not finish yet. It increments root->nr_swapfiles from 0 to 1; 3) Task B checks that the file meets all requirements to be an active swap file - it has NOCOW set, there are no snapshots for the inode's root at the moment, no file holes, no reflinked extents, etc; 4) Task B returns success and now the file is an active swap file; 5) Task A commits the transaction to create the snapshot and finishes. The swap file's extents are now shared between the original root and the snapshot; 6) A write into an extent of the swap file is attempted - there is a snapshot of the file's root, so we fall back to COW mode and therefore the physical location of the extent changes on disk. So fix this by taking the snapshot lock during swap file activation before locking the extent range, as that is the order in which we lock these during buffered writes. Fixes: ed46ff3d ("Btrfs: support swap files") CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Filipe Manana authored
When we active a swap file, at btrfs_swap_activate(), we acquire the exclusive operation lock to prevent the physical location of the swap file extents to be changed by operations such as balance and device replace/resize/remove. We also call there can_nocow_extent() which, among other things, checks if the block group of a swap file extent is currently RO, and if it is we can not use the extent, since a write into it would result in COWing the extent. However we have no protection against a scrub operation running after we activate the swap file, which can result in the swap file extents to be COWed while the scrub is running and operating on the respective block group, because scrub turns a block group into RO before it processes it and then back again to RW mode after processing it. That means an attempt to write into a swap file extent while scrub is processing the respective block group, will result in COWing the extent, changing its physical location on disk. Fix this by making sure that block groups that have extents that are used by active swap files can not be turned into RO mode, therefore making it not possible for a scrub to turn them into RO mode. When a scrub finds a block group that can not be turned to RO due to the existence of extents used by swap files, it proceeds to the next block group and logs a warning message that mentions the block group was skipped due to active swap files - this is the same approach we currently use for balance. Fixes: ed46ff3d ("Btrfs: support swap files") CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
-
Filipe Manana authored
During the nocow writeback path, we currently iterate the rbtree of block groups twice: once for checking if the target block group is RO with the call to btrfs_extent_readonly()), and once again for getting a nocow reference on the block group with a call to btrfs_inc_nocow_writers(). Since btrfs_inc_nocow_writers() already returns false when the target block group is RO, remove the call to btrfs_extent_readonly(). Not only we avoid searching the blocks group rbtree twice, it also helps reduce contention on the lock that protects it (specially since it is a spin lock and not a read-write lock). That may make a noticeable difference on very large filesystems, with thousands of allocated block groups. Reviewed-by:
-
Nikolay Borisov authored
During allocation the allocator will try to allocate an extent using cluster policy. Once the current cluster is exhausted it will remove the entry under btrfs_free_cluster::lock and subsequently acquire btrfs_free_space_ctl::tree_lock to dispose of the already-deleted entry and adjust btrfs_free_space_ctl::total_bitmap. This poses a problem because there exists a race condition between removing the entry under one lock and doing the necessary accounting holding a different lock since extent freeing only uses the 2nd lock. This can result in the following situation: T1: T2: btrfs_alloc_from_cluster insert_into_bitmap <holds tree_lock> if (entry->bytes == 0) if (block_group && !list_empty(&block_group->cluster_list)) { rb_erase(entry) spin_unlock(&cluster->lock); (total_bitmaps is still 4) spin_lock(&cluster->lock); <doesn't find entry in cluster->root> spin_lock(&ctl->tree_lock); <goes to new_bitmap label, adds <blocked since T2 holds tree_lock> <a new entry and calls add_new_bitmap> recalculate_thresholds <crashes, due to total_bitmaps becoming 5 and triggering an ASSERT> To fix this ensure that once depleted, the cluster entry is deleted when both cluster lock and tree locks are held in the allocator (T1), this ensures that even if there is a race with a concurrent insert_into_bitmap call it will correctly find the entry in the cluster and add the new space to it. CC: <stable@vger.kernel.org> # 4.4+ Reviewed-by: -
Qu Wenruo authored
Currently check_compressed_csum() completely relies on sectorsize == PAGE_SIZE to do checksum verification for compressed extents. To make it subpage compatible, this patch will: - Do extra calculation for the csum range Since we have multiple sectors inside a page, we need to only hash the range we want, not the full page anymore. - Do sector-by-sector hash inside the page With this patch and previous conversion on btrfs_submit_compressed_read(), now we can read subpage compressed extents properly, and do proper csum verification. Reviewed-by:
-
Qu Wenruo authored
For compressed read, we always submit page read using page size. This doesn't work well with subpage, as for subpage one page can contain several sectors. Such submission will read range out of what we want, and cause problems. Thankfully to make it subpage compatible, we only need to change how the last page of the compressed extent is read. Instead of always adding a full page to the compressed read bio, if we're at the last page, calculate the size using compressed length, so that we only add part of the range into the compressed read bio. Since we are here, also change the PAGE_SIZE used in lookup_extent_mapping() to sectorsize. This modification won't cause any functional change, as lookup_extent_mapping() can handle the case where the search range is larger than found extent range. Reviewed-by:
-
Ira Weiny authored
When a qstripe is required an extra page is allocated and mapped. There were 3 problems: 1) There is no corresponding call of kunmap() for the qstripe page. 2) There is no reason to map the qstripe page more than once if the number of bits set in rbio->dbitmap is greater than one. 3) There is no reason to map the parity page and unmap it each time through the loop. The page memory can continue to be reused with a single mapping on each iteration by raid6_call.gen_syndrome() without remapping. So map the page for the duration of the loop. Similarly, improve the algorithm by mapping the parity page just 1 time. Fixes: 5a6ac9ea ("Btrfs, raid56: support parity scrub on raid56") CC: stable@vger.kernel.org # 4.4.x: c17af965: btrfs: raid56: simplify tracking of Q stripe presence CC: stable@vger.kernel.org # 4.4.x Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
-
- 09 Feb, 2021 11 commits
-
-
Naohiro Aota authored
This final patch adds the ZONED incompat flag to the supported flags and enables to mount ZONED flagged file system. Reviewed-by:
-
Naohiro Aota authored
Since the zoned filesystem requires sequential write out of metadata, we cannot proceed with a hole in tree-log pages. When such a hole exists, btree_write_cache_pages() will return -EAGAIN. This happens when someone, e.g., a concurrent transaction commit, writes a dirty extent in this tree-log commit. If we are not going to wait for the extents, we can hope the concurrent writing fills the hole for us. So, we can ignore the error in this case and hope the next write will succeed. If we want to wait for them and got the error, we cannot wait for them because it will cause a deadlock. So, let's bail out to a full commit in this case. Reviewed-by:
-
Naohiro Aota authored
This is the 3/3 patch to enable tree-log on zoned filesystems. The allocation order of nodes of "fs_info->log_root_tree" and nodes of "root->log_root" is not the same as the writing order of them. So, the writing causes unaligned write errors. Reorder the allocation of them by delaying allocation of the root node of "fs_info->log_root_tree," so that the node buffers can go out sequentially to devices. Cc: Filipe Manana <fdmanana@gmail.com> Reviewed-by:
-
Naohiro Aota authored
This is the 2/3 patch to enable tree-log on zoned filesystems. Since we can start more than one log transactions per subvolume simultaneously, nodes from multiple transactions can be allocated interleaved. Such mixed allocation results in non-sequential writes at the time of a log transaction commit. The nodes of the global log root tree (fs_info->log_root_tree), also have the same problem with mixed allocation. Serializes log transactions by waiting for a committing transaction when someone tries to start a new transaction, to avoid the mixed allocation problem. We must also wait for running log transactions from another subvolume, but there is no easy way to detect which subvolume root is running a log transaction. So, this patch forbids starting a new log transaction when other subvolumes already allocated the global log root tree. Reviewed-by:
-
Naohiro Aota authored
This is the 1/3 patch to enable tree log on zoned filesystems. The tree-log feature does not work on a zoned filesystem as is. Blocks for a tree-log tree are allocated mixed with other metadata blocks and btrfs writes and syncs the tree-log blocks to devices at the time of fsync(), which has a different timing than a global transaction commit. As a result, both writing tree-log blocks and writing other metadata blocks become non-sequential writes that zoned filesystems must avoid. Introduce a dedicated block group for tree-log blocks, so that tree-log blocks and other metadata blocks can be separate write streams. As a result, each write stream can now be written to devices separately. "fs_info->treelog_bg" tracks the dedicated block group and assigns "treelog_bg" on-demand on tree-log block allocation time. This commit extends the zoned block allocator to use the block group. Reviewed-by:
-
Naohiro Aota authored
This is a preparation patch for the next patch. Split alloc_log_tree() into two parts. The first one allocating the tree structure, remains in alloc_log_tree() and the second part allocating the tree node, which is moved into btrfs_alloc_log_tree_node(). Also export the latter part is to be used in the next patch. Reviewed-by:
-
Naohiro Aota authored
When a bad checksum is found and if the filesystem has a mirror of the damaged data, we read the correct data from the mirror and writes it to damaged blocks. This however, violates the sequential write constraints of a zoned block device. We can consider three methods to repair an IO failure in zoned filesystems: (1) Reset and rewrite the damaged zone (2) Allocate new device extent and replace the damaged device extent to the new extent (3) Relocate the corresponding block group Method (1) is most similar to a behavior done with regular devices. However, it also wipes non-damaged data in the same device extent, and so it unnecessary degrades non-damaged data. Method (2) is much like device replacing but done in the same device. It is safe because it keeps the device extent until the replacing finish. However, extending device replacing is non-trivial. It assumes "src_dev->physical == dst_dev->physical". Also, the extent mapping replacing function should be extended to support replacing device extent position in one device. Method (3) invokes relocation of the damaged block group and is straightforward to implement. It relocates all the mirrored device extents, so it potentially is a more costly operation than method (1) or (2). But it relocates only used extents which reduce the total IO size. Let's apply method (3) for now. In the future, we can extend device-replace and apply method (2). For protecting a block group gets relocated multiple time with multiple IO errors, this commit introduces "relocating_repair" bit to show it's now relocating to repair IO failures. Also it uses a new kthread "btrfs-relocating-repair", not to block IO path with relocating process. This commit also supports repairing in the scrub process. Reviewed-by: -
Naohiro Aota authored
Currently fallocate() is disabled on a zoned filesystem. Since current relocation process relies on preallocation to move file data extents, it must be handled differently. On a zoned filesystem, we just truncate the inode to the size that we wanted to pre-allocate. Then, we flush dirty pages on the file before finishing the relocation process. run_delalloc_zoned() will handle all the allocations and submit IOs to the underlying layers. Reviewed-by:
-
Naohiro Aota authored
This is 4/4 patch to implement device-replace on zoned filesystems. Even after the copying is done, the write pointers of the source device and the destination device may not be synchronized. For example, when the last allocated extent is freed before device-replace process, the extent is not copied, leaving a hole there. Synchronize the write pointers by writing zeroes to the destination device. Reviewed-by:
-
Naohiro Aota authored
This is 3/4 patch to implement device-replace on zoned filesystems. This commit implements copying. To do this, it tracks the write pointer during the device replace process. As device-replace's copy process is smart enough to only copy used extents on the source device, we have to fill the gap to honor the sequential write requirement in the target device. The device-replace process on zoned filesystems must copy or clone all the extents in the source device exactly once. So, we need to ensure allocations started just before the dev-replace process to have their corresponding extent information in the B-trees. finish_extent_writes_for_zoned() implements that functionality, which basically is the removed code in the commit 042528f8 ("Btrfs: fix block group remaining RO forever after error during device replace"). Reviewed-by:
-
Naohiro Aota authored
This is 2/4 patch to implement device replace for zoned filesystems. In zoned mode, a block group must be either copied (from the source device to the target device) or cloned (to both devices). Implement the cloning part. If a block group targeted by an IO is marked to copy, we should not clone the IO to the destination device, because the block group is eventually copied by the replace process. This commit also handles cloning of device reset. Reviewed-by:
-
