ppp has a custom statistics interface using SIOCDEVPRIVATE
ioctl commands that works correctly in compat mode.

Convert it to use ndo_siocdevprivate as a cleanup.

Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The private sb1000 ioctl commands all work correctly in
compat mode. Change the to ndo_siocdevprivate as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The rr_ioctl uses private ioctl commands that correctly pass
all data through ifr_data, which works fine in compat mode.

Change it to use ndo_siocdevprivate as a cleanup.

Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: linux-hippi@sunsite.dk
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The various ipv4 and ipv6 tunnel drivers each implement a set
of 12 SIOCDEVPRIVATE commands for managing tunnels. These
all work correctly in compat mode.

Move them over to the new .ndo_siocdevprivate operation.

Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The airo driver overloads SIOCDEVPRIVATE ioctls with another
set based on SIOCIWFIRSTPRIV. Only the first ones actually
work (also in compat mode) as the others do not get passed
down any more.

Change it over to ndo_siocdevprivate for clarification.

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

hamradio uses a set of private ioctls that do seem to work
correctly in compat mode, as they only rely on the ifr_data
pointer.

Move them over to the ndo_siocdevprivate callback as a cleanup.

Cc: Thomas Sailer <t.sailer@alumni.ethz.ch>
Cc: Joerg Reuter <jreuter@yaina.de>
Cc: Jean-Paul Roubelat <jpr@f6fbb.org>
Cc: linux-hams@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb3 has a private multiplexor that works correctly in compat
mode, split out the siocdevprivate callback from do_ioctl for
simplification.

Cc: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth has both standard MII ioctls and custom SIOCDEVPRIVATE ones,
all of which work correctly with compat user space.

Move the private ones over to the new ndo_siocdevprivate callback.

Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

slip and plip both use a couple of SIOCDEVPRIVATE ioctl
commands that overload the ifreq layout in a way that is
incompatible with compat mode.

Convert to use ndo_siocdevprivate to allow passing the
data this way, but return an error in compat mode anyway
because the private structure is still incompatible.

This could be fixed as well to make compat work properly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pegasus and rtl8150 drivers use SIOCDEVPRIVATE ioctls
to access their MII registers, in place of the normal
commands. This is broken for all compat ioctls today.

Change to ndo_siocdevprivate to fix it.

Cc: Petko Manolov <petkan@nucleusys.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The skfddi driver has a private ioctl and passes the data correctly
through ifr_data, but the use of a pointer in s_skfp_ioctl is
broken in compat mode.

Change the driver to use ndo_siocdevprivate and disallow calling
it in compat mode until a conversion handler is added.

Cc: "Maciej W. Rozycki" <macro@orcam.me.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The private ioctls in eql pass the arguments correctly through ifr_data,
but the slaving_request_t and slave_config_t structures are incompatible
with compat mode and need special conversion code in the driver.

Convert to siocdevprivate for now, and return an error when called
in compat mode.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tehuti only implements private ioctl commands, and implements
them by overriding the ifreq layout, which is broken in
compat mode.

Move it to the ndo_siocdevprivate callback in order to fix this.

Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

hamachi has one command that overloads the ifreq argument
and requires a conversion to ndo_siocdevprivate in order to
make compat mode work, so split it from ndo_ioctl.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

appletalk has three SIOCDEVPRIVATE ioctl commands that are
broken in compat mode because the passed structure contains
a pointer.

Change it over to ndo_siocdevprivate for consistency and
make it return an error when called in compat mode. This
could be fixed if there are still users.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bonding driver supports two command codes for each operation: one
in the SIOCDEVPRIVATE range and another one with the same definition
but a unique command code.

Only the second set currently works in compat mode, as the ifr_data
expansion overwrites part of the ifr_slave field.

Move the private ones into ndo_siocdevprivate and change the
implementation to call the other function.  This makes both version
work correctly.

Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tulip driver has a debugging method over ioctl built-in, but it
does not actually check the command type, which may end up leading
to random behavior when trying to run other ioctls on it.

Change the driver to use ndo_siocdevprivate and limit the execution
further to the first private command code. If anyone still has tools
to run these debugging commands, they might have to be patched for
it if they pass different ioctl command.

The function has existed in this form since the driver was merged in
Linux-1.1.86.

Cc: linux-parisc@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

phonet has a single private ioctl that is broken in compat
mode on big-endian machines today because the data returned
from it is never copied back to user space.

Move it over to the ndo_siocdevprivate callback, which also
fixes the compat issue.

Cc: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rémi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bridge driver has an old set of ioctls using the SIOCDEVPRIVATE
namespace that have never worked in compat mode and are explicitly
forbidden already.

Move them over to ndo_siocdevprivate and fix compat mode for these,
because we can.

Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

hostap has a combination of iwpriv ioctls that do not work at
all, and two SIOCDEVPRIVATE commands that work natively but
lack a compat conversion handler.

For the moment, move them over to the new ndo_siocdevprivate
interface and return an error for compat mode.

Cc: Jouni Malinen <j@w1.fi>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

wlan-ng has two private ioctls that correctly work in compat
mode. Move these over to the new ndo_siocdevprivate mechanism.

The p80211netdev_ethtool() function is commented out and
has no use here, so this can be removed
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtl8188eu has an "android private" ioctl command multiplexer
that is not currently safe for use in compat mode because
of its triple-indirect pointer.

rtl8723bs uses a different interface on the SIOCDEVPRIVATE
command, based on the iwpriv data structure

Both also have normal unreachable iwpriv commands, and all
of the above should probably just get removed. For the
moment, just switch over to the new interface.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

SIOCDEVPRIVATE ioctl commands are mainly used in really old
drivers, and they have a number of problems:

- They hide behind the normal .ndo_do_ioctl function that
  is also used for other things in modern drivers, so it's
  hard to spot a driver that actually uses one of these

- Since drivers use a number different calling conventions,
  it is impossible to support compat mode for them in
  a generic way.

- With all drivers using the same 16 commands codes, there
  is no way to introspect the data being passed through
  things like strace.

Add a new net_device_ops callback pointer, to address the
first two of these. Separating them from .ndo_do_ioctl
makes it easy to grep for drivers with a .ndo_siocdevprivate
callback, and the unwieldy name hopefully makes it easier
to spot in code review.

By passing the ifreq structure and the ifr_data pointer
separately, it is no longer necessary to overload these,
and the driver can use either one for a given command.

Cc: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neal Cardwell says:

====================
more accurate DSACK processing for RACK-TLP

This patch series includes two minor improvements to tighten up the accuracy of
the processing of incoming DSACK information, so that RACK-TLP behavior is
faster and more precise: first, to ensure we detect packet loss in some extra
corner cases; and second, to avoid growing the RACK reordering window (and
delaying fast recovery) in cases where it seems clear we don't need to.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, a DSACK could expand the RACK reordering window when no
reordering has been seen, and/or when the DSACK was due to an
unnecessary TLP retransmit (rather than a spurious fast recovery due
to reordering). This could result in unnecessarily growing the RACK
reordering window and thus unnecessarily delaying RACK-based fast
recovery episodes.

To avoid these issues, this commit tightens the conditions under which
a DSACK triggers the RACK reordering window to grow, so that a
connection only expands its RACK reordering window if:

(a) reordering has been seen in the connection
(b) a DSACKed range does not match the most recent TLP retransmit
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously TLP is considered spurious if the sender receives any
DSACK during a TLP episode. This patch further checks the DSACK
sequences match the TLP's to improve accuracy.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qdisc_enqueue tracepoint can work with qdisc:qdisc_dequeue
to measure packets latency in qdisc queues.

Add a new field txq for it, then we can retrieve more info.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some return variables are never changed until function returned.
These variables are unneeded for their functions. Therefore, the
unneeded return variables can be removed safely by returning their
initial values.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a documentation entry for the DPAA2 switch listing its
requirements, features and some examples to go along them.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark Gray says:

====================
openvswitch: per-cpu upcall patchwork issues

Some issues were raised by patchwork at:
https://patchwork.kernel.org/project/netdevbpf/patch/20210630095350.817785-1-mark.d.gray@redhat.com/#24285159
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

fix incorrect type in argument 1 (different address spaces)

../net/openvswitch/datapath.c:169:17: warning: incorrect type in argument 1 (different address spaces)
../net/openvswitch/datapath.c:169:17:    expected void const *
../net/openvswitch/datapath.c:169:17:    got struct dp_nlsk_pids [noderef] __rcu *upcall_portids

Found at: https://patchwork.kernel.org/project/netdevbpf/patch/20210630095350.817785-1-mark.d.gray@redhat.com/#24285159Signed-off-by: Mark Gray <mark.d.gray@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Mark Gray <mark.d.gray@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Mark Gray <mark.d.gray@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the case when nlh is NULL in nlmsg_report(),
so that the caller doesn't need to deal with this case.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, all drivers depend on the bool CONFIG_NET_SWITCHDEV, but only
the drivers that call some sort of function exported by the bridge, like
br_vlan_enabled() or whatever, have an extra dependency on CONFIG_BRIDGE.

Since the blamed commit, all switchdev drivers have a functional
dependency upon switchdev_bridge_port_{,un}offload(), which is a pair of
functions exported by the bridge module and not by the bridge-independent
part of CONFIG_NET_SWITCHDEV.

Problems appear when we have:

CONFIG_BRIDGE=m
CONFIG_NET_SWITCHDEV=y
CONFIG_TI_CPSW_SWITCHDEV=y

because cpsw, am65_cpsw and sparx5 will then be built-in but they will
call a symbol exported by a loadable module. This is not possible and
will result in the following build error:

drivers/net/ethernet/ti/cpsw_new.o: in function `cpsw_netdevice_event':
drivers/net/ethernet/ti/cpsw_new.c:1520: undefined reference to
					`switchdev_bridge_port_offload'
drivers/net/ethernet/ti/cpsw_new.c:1537: undefined reference to
					`switchdev_bridge_port_unoffload'

As mentioned, the other switchdev drivers don't suffer from this because
switchdev_bridge_port_offload() is not the first symbol exported by the
bridge that they are calling, so they already needed to deal with this
in the same way.

Fixes: 2f5dc00f ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the cited commit, copy_to_user() got called with the wrong pointer,
instead of passing the actual buffer ptr to copy from, a pointer to
the pointer got passed, which causes a buffer overflow calltrace to pop
up when executing "ethtool -x ethX".

Fix ethtool_rxnfc_copy_to_user() to use the rxnfc pointer as passed
to the function, instead of a pointer to it.

This fixes below call trace:
[   15.533533] ------------[ cut here ]------------
[   15.539007] Buffer overflow detected (8 < 192)!
[   15.544110] WARNING: CPU: 3 PID: 1801 at include/linux/thread_info.h:200 copy_overflow+0x15/0x20
[   15.549308] Modules linked in:
[   15.551449] CPU: 3 PID: 1801 Comm: ethtool Not tainted 5.14.0-rc2+ #1058
[   15.553919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[   15.558378] RIP: 0010:copy_overflow+0x15/0x20
[   15.560648] Code: e9 7c ff ff ff b8 a1 ff ff ff eb c4 66 0f 1f 84 00 00 00 00 00 55 48 89 f2 89 fe 48 c7 c7 88 55 78 8a 48 89 e5 e8 06 5c 1e 00 <0f> 0b 5d c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55
[   15.565114] RSP: 0018:ffffad49c0523bd0 EFLAGS: 00010286
[   15.566231] RAX: 0000000000000000 RBX: 00000000000000c0 RCX: 0000000000000000
[   15.567616] RDX: 0000000000000001 RSI: ffffffff8a7912e7 RDI: 00000000ffffffff
[   15.569050] RBP: ffffad49c0523bd0 R08: ffffffff8ab2ae28 R09: 00000000ffffdfff
[   15.570534] R10: ffffffff8aa4ae40 R11: ffffffff8aa4ae40 R12: 0000000000000000
[   15.571899] R13: 00007ffd4cc2a230 R14: ffffad49c0523c00 R15: 0000000000000000
[   15.573584] FS:  00007f538112f740(0000) GS:ffff96d5bdd80000(0000) knlGS:0000000000000000
[   15.575639] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.577092] CR2: 00007f5381226d40 CR3: 0000000013542000 CR4: 00000000001506e0
[   15.578929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   15.580695] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   15.582441] Call Trace:
[   15.582970]  ethtool_rxnfc_copy_to_user+0x30/0x46
[   15.583815]  ethtool_get_rxnfc.cold+0x23/0x2b
[   15.584584]  dev_ethtool+0x29c/0x25f0
[   15.585286]  ? security_netlbl_sid_to_secattr+0x77/0xd0
[   15.586728]  ? do_set_pte+0xc4/0x110
[   15.587349]  ? _raw_spin_unlock+0x18/0x30
[   15.588118]  ? __might_sleep+0x49/0x80
[   15.588956]  dev_ioctl+0x2c1/0x490
[   15.589616]  sock_ioctl+0x18e/0x330
[   15.591143]  __x64_sys_ioctl+0x41c/0x990
[   15.591823]  ? irqentry_exit_to_user_mode+0x9/0x20
[   15.592657]  ? irqentry_exit+0x33/0x40
[   15.593308]  ? exc_page_fault+0x32f/0x770
[   15.593877]  ? exit_to_user_mode_prepare+0x3c/0x130
[   15.594775]  do_syscall_64+0x35/0x80
[   15.595397]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   15.596037] RIP: 0033:0x7f5381226d4b
[   15.596492] Code: 0f 1e fa 48 8b 05 3d b1 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d b1 0c 00 f7 d8 64 89 01 48
[   15.598743] RSP: 002b:00007ffd4cc2a1f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   15.599804] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5381226d4b
[   15.600795] RDX: 00007ffd4cc2a350 RSI: 0000000000008946 RDI: 0000000000000003
[   15.601712] RBP: 00007ffd4cc2a340 R08: 00007ffd4cc2a350 R09: 0000000000000001
[   15.602751] R10: 00007f538128a990 R11: 0000000000000246 R12: 0000000000000000
[   15.603882] R13: 00007ffd4cc2a350 R14: 00007ffd4cc2a4b0 R15: 0000000000000000
[   15.605042] ---[ end trace 325cf185e2795048 ]---

Fixes: dd98d289 ("ethtool: improve compat ioctl handling")
Reported-by: Shannon Nelson <snelson@pensando.io>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tested-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: defer taking uC proxy clock

This series rearranges some of the IPA initialization code.

The first patch gets rid of two trivial setup and teardown
functions, open-coding them in their callers instead.

The second patch has memory regions get configured before endpoints.

IPA interrupts do not depend on GSI being initialized.  Therefore
they can be initialized in the config phase rather than waiting for
setup.  The third patch moves this initialization earlier; memory
regions must already be defined, so it's done after memory config.

The microcontroller also has no dependency on GSI, though it does
require IPA interrupts to be configured.  The fourth patch moves
microcontroller initialization so it too happens during the config
phase rather than setup.

Finally, we currently take a "proxy clock" for the microcontroller
during the config phase, dropping it only after we learn the
microcontroller is initialized.  But microcontroller initialization
is started by the modem, so there's no point in taking that clock
reference before we know the modem has booted.  So the last patch
arranges to wait to take the "proxy clock" for the microcontroller
until we know the modem is about to boot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The first time it's booted, the modem loads and starts the
IPA-resident microcontroller.  Once the microcontroller has
completed its initialization, it notifies the AP it's "ready"
by sending an INIT_COMPLETED response message.

Until it receives that microcontroller message, the AP must ensure
the IPA core clock remains operational.  Currently, a "proxy" clock
reference is taken in ipa_uc_config(), dropping it again once the
message is received.

However there could be a long delay between when ipa_config()
completes and when modem actually starts.  And because the
microcontroller gets loaded by the modem, there's no need to
get the modem "proxy clock" until the first time it starts.

Create a new function ipa_uc_clock() which takes the "proxy" clock
reference for the microcontroller.  Call it when we get remoteproc
SSR notification that the modem is about to start.  Keep an
additional flag to record whether this proxy clock reference needs
to be dropped at shutdown time, and issue a warning if we get the
microcontroller message either before the clock reference is taken,
or after it has already been dropped.

Drop the nearby use of "hh" length modifiers, which are no longer
encouraged in the kernel.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initializing up the IPA-resident microcontroller requires the IPA
clock, and sets up two IPA interrupt handlers, but this does not
require GSI access.  The interrupt handlers also require the clock
to be enabled, and require the IPA memory regions to be configured,
but neither requires GSI access.  As a result, the microcontroller
can be initialized during the "config" rather than "setup" phase of
IPA initialization.

Initialize the microcontroller in ipa_config() rather than
ipa_setup(), and rename the called function ipa_uc_config().
Do the inverse in ipa_deconfig() rather than ipa_teardown(),
and rename the function for that case ipa_uc_deconfig().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialization of the IPA driver has several phases:
   - "init" phase can be done without any access to IPA hardware
   - "config" phase requires the IPA hardware to be clocked
   - "setup" phase requires the GSI layer to be functional

Currently, initialization for the IPA interrupt handling code occurs
in the setup phase.  It requires access to the IPA hardware but does
not need GSI, so it can be moved to the config phase instead.

Call the interrupt configuration function early in ipa_config()
rather than from ipa_setup().  Rename ipa_interrupt_setup() to be
ipa_interrupt_config(), and ipa_interrupt_teardown() to be
ipa_interupt_deconfig(), so their names properly indicate when
they get called.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>