Adding mask info into struct regs_dump to make the registers information
compact.

The mask was always passed along, so logically the mask info fits more
into the struct regs_dump.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-9-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We are not interested in zero addresses in callchain, do not report
them.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-8-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The 'unwind__get_entries' function currently returns 'max_stack + 1'
entries (instead of exact max_stack entries), because max_stack value
does not get decremented for the first entry.

This fix makes dwarf-unwind test pass.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-7-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding dwarf unwind test, that setups live machine data over the perf
test thread and does the remote unwind.

At this moment this test fails due to bug in the max_stack processing in
unwind__get_entries function.  This is fixed in following patch.

Need to use -fno-optimize-sibling-calls for test compilation, otherwise
'krava_*' function calls are optimized into jumps and ommited from the
stack unwind.

So far it's enabled only for x86.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-6-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Introducing perf_regs_load function, which is going to be used for dwarf
unwind test in following patches.

It takes single argument as a pointer to the regs dump buffer and
populates it with current registers values.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-5-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Properly destroying trace_seq object.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1391377150-23920-2-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding people readable output for callchain debug, to get following '-v'
output:

  $ perf record -v -g ls
  callchain: type DWARF
  callchain: stack dump size 4096
  ...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1391427883-13443-3-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding call-graph option support into .perfconfig file, so it's now
possible use call-graph option like:

  [top]
        call-graph = fp

  [record]
        call-graph = dwarf,8192

Above options ONLY setup the unwind method. To enable perf record/top to
actually use it the command line option -g/-G must be specified.

The --call-graph option overloads .perfconfig setup.

Assuming above configuration:

  $ perf record -g ls
  - enables dwarf unwind with user stack size dump 8192 bytes

  $ perf top -G
  - enables frame pointer unwind

  $ perf record --call-graph=fp ls
  - enables frame pointer unwind

  $ perf top --call-graph=dwarf,4096 ls
  - enables dwarf unwind with user stack size dump 4096 bytes
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1391427883-13443-2-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We use PERF_SAMPLE_PERIOD sample type only for frequency
setup -F (default) option. The -c does not need store period,
because it's always the same.

In -c case the report code uses '1' as  period. Fixing
it to perf_event_attr::sample_period.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1391427883-13443-1-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since all it wants is to get the 'struct record' from the received
'struct perf_tool', and this is already done at the callers of these
functions, short circuit it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xz8p659sjpad396vye5t24gx@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since two of the parameters come from the same 'struct
addr_location', rename machine__resolve_bstack() to sample__resolve_bstack()
and pass the that addr_location instead.

This is also for consistency with the same change that resulted in the
sample__resolve_mem() function.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-99ecqt8jiyyksiyx3se7l5ia@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since three of the parameters come from the same 'struct addr_location',
rename machine__resolve_mem() to sample__resolve_mem() and pass the
that addr_location instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3f5otpssefh9l5hi1t259h8n@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We don't need to recalculate cpumode from the perf_event->header field,
as this is already available in the struct addr_location->cpumode field.

Remove the function signature of functions that receive both perf_event
and addr_location parameters but use perf_event just to extract the
cpumode.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tmct07y7mka54allj82trlnx@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To have some 'perf probe' related fixes needed for further devel work in
this tool.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Supporting decoding the ioctl 'request' parameter needs more work to
properly support more architectures, the current approach doesn't work
on at least powerpc and sparc, as reported by Ben Hutchings in
http://lkml.kernel.org/r/1391593985.3003.48.camel@deadeye.wl.decadent.org.uk .

Work around that by making it to be ifdefed for the architectures known
to work with the current, limited approach, i386 and x86_64 till better
code is written.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: <stable@vger.kernel.org> # 3.13 Fixes: 78645cf3 ("perf trace: Initial beautifier for ioctl's 'cmd' arg")
Link: http://lkml.kernel.org/n/tip-ss04k11insqlu329xh5g02q0@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

glibc 2.17 is missing this on sparc, despite the fact that it's not
architecture-specific.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 49af9e93 ('perf trace: Beautify eventfd2 'flags' arg')
Cc: <stable@vger.kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1391648435.3003.100.camel@deadeye.wl.decadent.org.ukSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

"perf list" listing of hardware events doesn't work on older ARM devices.
The change enabling event detection:

 commit b41f1cec
 Author: Namhyung Kim <namhyung.kim@lge.com>
 Date:   Tue Aug 27 11:41:53 2013 +0900

     perf list: Skip unsupported events

uses the following code in tools/perf/util/parse-events.c:

        struct perf_event_attr attr = {
                .type = type,
                .config = config,
                .disabled = 1,
                .exclude_kernel = 1,
        };

On ARM machines pre-dating the Cortex-A15 this doesn't work, as these
machines don't support .exclude_kernel.  So starting with 3.12 "perf
list" does not report any hardware events at all on older machines (seen
on Rasp-Pi, Pandaboard, Beagleboard, etc).

This version of the patch makes changes suggested by Namhyung Kim to
check for EACCESS and retry (instead of just dropping the
exclude_kernel) so we can properly handle machines where
/proc/sys/kernel/perf_event_paranoid is set to 2.
Reported-by: Chad Paradis <chad.paradis@umit.maine.edu>
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Chad Paradis <chad.paradis@umit.maine.edu>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1312301536150.28814@vincent-weaver-1.um.maine.eduSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We removed event types from data file in following commits:

  6065210d perf tools: Remove event types framework completely
  44b3c578 perf tools: Remove event types from perf data file

We no longer need this information, because we can get it directly from
tracepoints.

But we still need to handle PERF_RECORD_HEADER_EVENT_TYPE event for the
sake of old perf data files created in pipe mode like:

  $ perf.3.4 record -o - foo >perf.data
  $ perf.312 report -i - < perf.data
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1391524668-12546-1-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix perf-probe not to add offset value twice to uprobe probe address
when post processing.

The tevs[i].point.address struct member is the address of symbol+offset,
but current perf-probe adjusts the point.address by adding the offset.

As a result, the probe address becomes symbol+offset+offset. This may
cause unexpected code corruption. Urgent fix is needed.

Without this fix:
  ---
  # ./perf probe -x ./perf dso__load_vmlinux+4
  # ./perf probe -l
    probe_perf:dso__load_vmlinux (on 0x000000000006d2b8)
  # nm ./perf.orig | grep dso__load_vmlinux\$
  000000000046d0a0 T dso__load_vmlinux
  ---

You can see the given offset is 3 but the actual probed address is
dso__load_vmlinux+8.

With this fix:
  ---
  # ./perf probe -x ./perf dso__load_vmlinux+4
  # ./perf probe -l
    probe_perf:dso__load_vmlinux (on 0x000000000006d2b4)
  ---

Now the problem is fixed.

Note: This bug is introduced by
	commit fb7345bbSigned-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "David A. Long" <dave.long@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20140205051858.6519.27314.stgit@kbuild-fedora.yrl.intra.hitachi.co.jpSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A bunch of unknown NMIs have popped up on a Pentium4 recently when booting
into a kdump kernel.  This was exposed because the watchdog timer went
from 60 seconds down to 10 seconds (increasing the ability to reproduce
this problem).

What is happening is on boot up of the second kernel (the kdump one),
the previous nmi_watchdogs were enabled on thread 0 and thread 1.  The
second kernel only initializes one cpu but the perf counter on thread 1
still counts.

Normally in a kdump scenario, the other cpus are blocking in an NMI loop,
but more importantly their local apics have the performance counters disabled
(iow LVTPC is masked).  So any counters that fire are masked and never get
through to the second kernel.

However, on a P4 the local apic is shared by both threads and thread1's PMI
(despite being configured to only interrupt thread1) will generate an NMI on
thread0.  Because thread0 knows nothing about this NMI, it is seen as an
unknown NMI.

This would be fine because it is a kdump kernel, strange things happen
what is the big deal about a single unknown NMI.

Unfortunately, the P4 comes with another quirk: clearing the overflow bit
to prevent a stream of NMIs.  This is the problem.

The kdump kernel can not execute because of the endless NMIs that happen.

To solve this, I instrumented the p4 perf init code, to walk all the counters
and zero them out (just like a normal reset would).

Now when the counters go off, they do not generate anything and no unknown
NMIs are seen.

I tested this on a P4 we have in our lab.  After two or three crashes, I could
normally reproduce the problem.  Now after 10 crashes, everything continues
to boot correctly.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140120154115.GZ25953@redhat.com
[ Fixed a stylistic detail. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

On a P4 box stressing perf with:

   ./perf record -o perf.data ./perf stat -v ./perf bench all

it was noticed that a slew of unknown NMIs would pop out rather quickly.

Painfully debugging this ancient platform, led me to notice cross cpu counter
corruption.

The P4 machine is special in that it has 18 counters, half are used for cpu0
and the other half is for cpu1 (or all 18 if hyperthreading is disabled).  But
the splitting of the counters has to be actively managed by the software.

In this particular bug, one of the cpu0 specific counters was being used by
cpu1 and caused all sorts of random unknown nmis.

I am not entirely sure on the corruption path, but what happens is:

 o perf schedules a group with p4_pmu_schedule_events()
 o inside p4_pmu_schedule_events(), it notices an hwc pointer is being reused
   but for a different cpu, so it 'swaps' the config bits and returns the
   updated 'assign' array with a _new_ index.
 o perf schedules another group with p4_pmu_schedule_events()
 o inside p4_pmu_schedule_events(), it notices an hwc pointer is being reused
   (the same one as above) but for the _same_ cpu [BUG!!], so it updates the
   'assign' array to use the _old_ (wrong cpu) index because the _new_ index is in
   an earlier part of the 'assign' array (and hasn't been committed yet).
 o perf commits the transaction using the wrong index and corrupts the other cpu

The [BUG!!] is because the 'hwc->config' is updated but not the 'hwc->idx'.  So
the check for 'p4_should_swap_ts()' is correct the first time around but
incorrect the second time around (because hwc->config was updated in between).

I think the spirit of perf was to not modify anything until all the
transactions had a chance to 'test' if they would succeed, and if so, commit
atomically.  However, P4 breaks this spirit by touching the hwc->config
element.

So my fix is to continue the un-perf like breakage, by assigning hwc->idx to -1
on swap to tell follow up group scheduling to find a new index.

Of course if the transaction fails rolling this back will be difficult, but
that is not different than how the current code works. :-)  And I wasn't sure
how much effort to cleanup the code I should do for a platform that is almost
10 years old by now.

Hence the lazy fix.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1391024270-19469-1-git-send-email-dzickus@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Calling printk() from NMI context is bad (TM), so move it to IRQ
context.

In doing so we slightly change (probably wreck) the debugfs
nmi_longest_ns thingy, in that it doesn't update to reflect the
longest, nor does writing to it reset the count.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-rdw0au56a5ymis1u8p48c12d@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Calling printk() from NMI context is bad (TM), so move it to IRQ
context.

This also avoids the problem where the printk() time is measured by
the generic NMI duration goo and triggers a second warning.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-75dv35xf6dhhmeb7nq6fua31@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Refresh the branch to a v3.14-rc base before queueing up new devel patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The current code forgets to change the CR4 state on the current CPU.
Use on_each_cpu() instead of smp_call_function().
Reported-by: Mark Davies <junk@eslaf.co.uk>
Suggested-by: Mark Davies <junk@eslaf.co.uk>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: fweisbec@gmail.com
Link: http://lkml.kernel.org/n/tip-69efsat90ibhnd577zy3z9gh@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

PPro machines can die hard when PCE gets enabled due to a CPU erratum.
The safe way it so disable it by default and keep it disabled.

See erratum 26 in:

  http://download.intel.com/design/archives/processors/pro/docs/24268935.pdfReported-and-Tested-by: Mark Davies <junk@eslaf.co.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140206170815.GW2936@laptop.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull pinctrl fixes from Linus Walleij:
 "First round of pin control fixes for v3.14:

   - Protect pinctrl_list_add() with the proper mutex.  This was
     identified by RedHat.  Caused nasty locking warnings was rootcased
     by Stanislaw Gruszka.

   - Avoid adding dangerous debugfs files when either half of the
     subsystem is unused: pinmux or pinconf.

   - Various fixes to various drivers: locking, hardware particulars, DT
     parsing, error codes"

* tag 'pinctrl-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: tegra: return correct error type
  pinctrl: do not init debugfs entries for unimplemented functionalities
  pinctrl: protect pinctrl_list add
  pinctrl: sirf: correct the pin index of ac97_pins group
  pinctrl: imx27: fix offset calculation in imx_read_2bit
  pinctrl: vt8500: Change devicetree data parsing
  pinctrl: imx27: fix wrong offset to ICONFB
  pinctrl: at91: use locked variant of irq_set_handler

Pull irq fix from Thomas Gleixner:
 "Add a missing Kconfig dependency"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Generic irq chip requires IRQ_DOMAIN

Pull x86 fixes from Peter Anvin:
 "Quite a varied little collection of fixes.  Most of them are
  relatively small or isolated; the biggest one is Mel Gorman's fixes
  for TLB range flushing.

  A couple of AMD-related fixes (including not crashing when given an
  invalid microcode image) and fix a crash when compiled with gcov"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Unify valid container checks
  x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y
  x86/efi: Allow mapping BGRT on x86-32
  x86: Fix the initialization of physnode_map
  x86, cpu hotplug: Fix stack frame warning in check_irq_vectors_for_cpu_disable()
  x86/intel/mid: Fix X86_INTEL_MID dependencies
  arch/x86/mm/srat: Skip NUMA_NO_NODE while parsing SLIT
  mm, x86: Revisit tlb_flushall_shift tuning for page flushes except on IvyBridge
  x86: mm: change tlb_flushall_shift for IvyBridge
  x86/mm: Eliminate redundant page table walk during TLB range flushing
  x86/mm: Clean up inconsistencies when flushing TLB ranges
  mm, x86: Account for TLB flushes only when debugging
  x86/AMD/NB: Fix amd_set_subcaches() parameter type
  x86/quirks: Add workaround for AMD F16h Erratum792
  x86, doc, kconfig: Fix dud URL for Microcode data

Pull jfs fix from David Kleikamp:
 "Fix regression"

* tag 'jfs-3.14-rc2' of git://github.com/kleikamp/linux-shaggy:
  jfs: fix generic posix ACL regression

I missed a couple errors in reviewing the patches converting jfs
to use the generic posix ACL function. Setting ACL's currently
fails with -EOPNOTSUPP.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/built-in.o: In function `dw_wdt_drv_probe':
drivers/watchdog/dw_wdt.c:302: undefined reference to `devm_ioremap_resource'
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Merge tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single kernfs fix to resolve a much-reported lockdep issue
  with the removal of entries in sysfs"

* tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kernfs: make kernfs_deactivate() honor KERNFS_LOCKDEP flag

Pull ceph fixes from Sage Weil:
 "There is an RBD fix for a crash due to the immutable bio changes, an
  error path fix, and a locking fix in the recent redirect support"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: do not dereference a NULL bio pointer
  libceph: take map_sem for read in handle_reply()
  libceph: factor out logic from ceph_osdc_start_request()
  libceph: fix error handling in ceph_osdc_init()

Pull arm64 fixes from Catalin Marinas:
 - Relax VDSO alignment requirements so that the kernel-picked one (4K)
   does not conflict with the dynamic linker's one (64K)
 - VDSO gettimeofday fix
 - Barrier fixes for atomic operations and cache flushing
 - TLB invalidation when overriding early page mappings during boot
 - Wired up new 32-bit arm (compat) syscalls
 - LSM_MMAP_MIN_ADDR when COMPAT is enabled
 - defconfig update
 - Clean-up (comments, pgd_alloc).

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: defconfig: Expand default enabled features
  arm64: asm: remove redundant "cc" clobbers
  arm64: atomics: fix use of acquire + release for full barrier semantics
  arm64: barriers: allow dsb macro to take option parameter
  security: select correct default LSM_MMAP_MIN_ADDR on arm on arm64
  arm64: compat: Wire up new AArch32 syscalls
  arm64: vdso: update wtm fields for CLOCK_MONOTONIC_COARSE
  arm64: vdso: fix coarse clock handling
  arm64: simplify pgd_alloc
  arm64: fix typo: s/SERRROR/SERROR/
  arm64: Invalidate the TLB when replacing pmd entries during boot
  arm64: Align CMA sizes to PAGE_SIZE
  arm64: add DSB after icache flush in __flush_icache_all()
  arm64: vdso: prevent ld from aligning PT_LOAD segments to 64k

Pull MIPS updates from Ralf Baechle:
 "hree minor patches.  All have sat in -next for a few days"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: fpu.h: Fix build when CONFIG_BUG is not set
  MIPS: Wire up sched_setattr/sched_getattr syscalls
  MIPS: Alchemy: Fix DB1100 GPIO registration

Pull media fixes from Mauro Carvalho Chehab:
 "A series of small fixes.  Mostly driver ones.  There is one core
  regression fix on a patch that was meant to fix some race issues on
  vb2, but that actually caused more harm than good.  So, we're just
  reverting it for now"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] adv7842: Composite free-run platfrom-data fix
  [media] v4l2-dv-timings: fix GTF calculation
  [media] hdpvr: Fix memory leak in debug
  [media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2
  [media] mxl111sf: Fix compile when CONFIG_DVB_USB_MXL111SF is unset
  [media] mxl111sf: Fix unintentional garbage stack read
  [media] cx24117: use a valid dev pointer for dev_err printout
  [media] cx24117: remove dead code in always 'false' if statement
  [media] update Michael Krufky's email address
  [media] vb2: Check if there are buffers before streamon
  [media] Revert "[media] videobuf_vm_{open,close} race fixes"
  [media] go7007-loader: fix usb_dev leak
  [media] media: bt8xx: add missing put_device call
  [media] exynos4-is: Compile in fimc-lite runtime PM callbacks conditionally
  [media] exynos4-is: Compile in fimc runtime PM callbacks conditionally
  [media] exynos4-is: Fix error paths in probe() for !pm_runtime_enabled()
  [media] s5p-jpeg: Fix wrong NV12 format parameters
  [media] s5k5baf: allow to handle arbitrary long i2c sequences

Pull hwmon fixes from Guenter Roeck:
 "Fix PMBus driver problem with some multi-page voltage sensors and fix
  da9055 interrupt initialization"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (da9055) Remove use of regmap_irq_get_virq()
  hwmon: (pmbus) Support per-page exponent in linear mode

Pull ACPI and power management fixes from Rafael Wysocki:
 "These include a fix for a recent ACPI hotplug regression, four
  concurrency related fixes and one PCI device removal fix for
  ACPI-based PCI hotplug (ACPIPHP), intel_pstate fix that should go into
  stable, three simple ACPI cleanups and a new entry for the ACPI video
  blacklist.

  Specifics:

   - Fix for a recent ACPI hotplug regression causing a NULL pointer
     dereference to occur while handling ACPI eject notifications for
     already ejected devices.  From Toshi Kani.

   - Four concurrency-related fixes for ACPIPHP.  Two of them add
     missing locking and the other two fix race conditions related to
     reference counting.

   - ACPIPHP fix to avoid NULL pointer dereferences during device
     removal involving Virtual Funcions.

   - intel_pstate fix to make it compute the percentage of time the CPU
     is busy properly.  From Dirk Brandewie.

   - Removal of two unnecessary NULL pointer checks in ACPI code and a
     fix for sscanf() format string from Dan Carpenter and Luis G.F.

   - New ACPI video blacklist entry for HP EliteBook Revolve 810 from
     Mika Westerberg"

* tag 'pm+acpi-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / hotplug: Fix panic on eject to ejected device
  ACPI / battery: Fix incorrect sscanf() string in acpi_battery_init_alarm()
  ACPI / proc: remove unneeded NULL check
  ACPI / utils: remove a pointless NULL check
  ACPI / video: Add HP EliteBook Revolve 810 to the blacklist
  intel_pstate: Take core C0 time into account for core busy calculation
  ACPI / hotplug / PCI: Fix bridge removal race vs dock events
  ACPI / hotplug / PCI: Fix bridge removal race in handle_hotplug_event()
  ACPI / hotplug / PCI: Scan root bus under the PCI rescan-remove lock
  ACPI / hotplug / PCI: Move PCI rescan-remove locking to hotplug_event()
  ACPI / hotplug / PCI: Remove entries from bus->devices in reverse order

Commit f38a5181 ("ceph: Convert to immutable biovecs") introduced
a NULL pointer dereference, which broke rbd in -rc1.  Fix it.

Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>