- 29 Aug, 2020 39 commits
-
-
Andrey Konovalov authored
VIDIOC_ENUM_FRAMESIZES support in the video capture driver is required by libcamera. Without this change libcamera errors out with: "ERROR V4L2 v4l2_videodevice.cpp:1059 /dev/video0[cap]: Unable to enumerate frame sizes: Inappropriate ioctl for device" Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Andrey Konovalov authored
Implement mbus_code filtering for format enumeration. Without this patch libcamera errors out with: "ERROR V4L2 v4l2_videodevice.cpp:982 /dev/video0[cap]: Media bus code filtering not supported by the device" Signed-off-by:
-
Niklas Söderlund authored
The media device is not usable by userspace before all devices involved in capture are present in the system. Move registering of the media device to the async complete callback. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Niklas Söderlund authored
If the VIN device is part of a group of VIN devices (all Gen3 boards) there is no reason to only unregister the group notifier if the VIN that registers the notifier is removed. The VIN that registers the notifier is always the last VIN device to be bound, so keeping the notifier around after any VIN is unbound creates an unbalanced state where no VIN in the group is operational. Fix this by unconditionally unregistering the notifier when any VIN device is unbound. Unregistering the notifier will lead to unbound() being called and all video devices exposed by any VIN instance to be removed. The lock was only needed to protect the check which VIN registers the notifier and is no longer needed. Signed-off-by:
-
Tom Rix authored
clang static analysis reports this problem tw5864-video.c:773:32: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage fintv->stepwise.max.numerator *= std_max_fps; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ stepwise.max is set with frameinterval, which comes from ret = tw5864_frameinterval_get(input, &frameinterval); fintv->stepwise.step = frameinterval; fintv->stepwise.min = frameinterval; fintv->stepwise.max = frameinterval; fintv->stepwise.max.numerator *= std_max_fps; When tw5864_frameinterval_get() fails, frameinterval is not set. So check the status and fix another similar problem. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Ismael Luceno authored
Remove broken bluecherry.net email Signed-off-by:
Ismael Luceno <ismael@iodev.co.uk> Signed-off-by:
-
Frederic Chen authored
We modified the type of media_device_request_alloc()'s second parameter from int* to void* so that it can match the interface defined in struct media_ioctl_info. [hverkuil: move #ifdef before variable to avoid compile warning] Signed-off-by:
Frederic Chen <frederic.chen@mediatek.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
YueHaibing authored
If CONFIG_PM is not set, gcc warns: drivers/staging/media/tegra-vde/vde.c:916:12: warning: 'tegra_vde_runtime_suspend' defined but not used [-Wunused-function] Make it __maybe_unused to fix this. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
Romain Perier <romain.perier@gmail.com> Signed-off-by:
Allen Pais <allen.lkml@gmail.com> Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Lubomir Rintel authored
On MMP3, the camera block lives on a separate power island. We want to turn it off if the CCIC is not in use to conserve power. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Lubomir Rintel authored
This simplifies things a bit and makes adding runtime PM a bit more straightforward. Signed-off-by:
-
Lubomir Rintel authored
The sole reason for this was so that it would be possible to get a mmp_camera from a platform_device in suspend/resume/remove hooks, because drvdata used to be used by the v4l core. Since commit 95db3a60 ("[media] v4l: Add a media_device pointer to the v4l2_device structure") it is no longer case and thus we can make things a great deal simpler. Signed-off-by:
-
Lubomir Rintel authored
Since commit 95db3a60 ("[media] v4l: Add a media_device pointer to the v4l2_device structure") the v4l core doesn't insist on using drvdata itself. Therefore we can use it ourselves, making things somewhat simpler. Signed-off-by:
-
Fabio Estevam authored
The following W=1 build warning is seen on a m68k: drivers/media/platform/fsl-viu.c: At top level: drivers/media/platform/fsl-viu.c:36: warning: "out_be32" redefined 36 | #define out_be32(v, a) iowrite32be(a, (void __iomem *)v) | In file included from ./arch/m68k/include/asm/io_mm.h:25, from ./arch/m68k/include/asm/io.h:8, from ./include/linux/io.h:13, from ./include/linux/irq.h:20, from ./include/asm-generic/hardirq.h:13, from ./arch/m68k/include/generated/asm/hardirq.h:1, from ./include/linux/hardirq.h:9, from ./include/linux/interrupt.h:11, from drivers/media/platform/fsl-viu.c:17: ./arch/m68k/include/asm/raw_io.h:32: note: this is the location of the previous definition 32 | #define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l)) Avoid the out_be32() and in_be32() redefinitions when building for CONFIG_M68K in the same way we currently do for CONFIG_PPC and CONFIG_MICROBLAZE. Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle report: drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c:963:6-31: WARNING: Comparison to bool Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
Daniel W. S. Almeida <dwlsalmeida@gmail.com> Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle reports: drivers/media/pci/cobalt/cobalt-i2c.c:176:16-21: WARNING: Comparison of 0/1 to bool variable drivers/media/pci/cobalt/cobalt-i2c.c:180:29-33: WARNING: Comparison of 0/1 to bool variable drivers/media/pci/cobalt/cobalt-i2c.c:121:16-21: WARNING: Comparison of 0/1 to bool variable drivers/media/pci/cobalt/cobalt-i2c.c:125:29-33: WARNING: Comparison of 0/1 to bool variable Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle reports: drivers/media/i2c/tda1997x.c:911:6-21: WARNING: Assignment of 0/1 to bool variable drivers/media/i2c/tda1997x.c:939:2-17: WARNING: Assignment of 0/1 to bool variable drivers/media/i2c/tda1997x.c:947:4-19: WARNING: Assignment of 0/1 to bool variable Replace assignment to 1 with true and assignment to 0 with false. Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle report: drivers/media/i2c/imx219.c:1191:1-18: WARNING: Assignment of 0/1 to bool variable Replace the assignment to 0 with false instead. Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle report: drivers/media/pci/cx23885/cx23885-video.c:639:24-44: duplicated argument to & or | V4L2_CAP_VBI_CAPTURE appears twice, remove it. Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle report: drivers/media/dvb-frontends/mb86a16.c:1455:6-8: WARNING: possible condition with no effect (if == else) Both branches are the same, so remove the if/else altogether. Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle report: drivers/media/usb/dvb-usb/dib0700_devices.c:1741:1-3: WARNING: possible condition with no effect (if == else) Both branches are the same, so remove the if/else altogether. Found using - Coccinelle (http://coccinelle.lip6.fr) [hverkuil: fix checkpatch warnings] Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle reports: drivers/media/pci/saa7164/saa7164-core.c:579:2-5: WARNING: Use BUG_ON instead of if condition followed by BUG. drivers/media/pci/saa7164/saa7164-core.c:592:3-6: WARNING: Use BUG_ON instead of if condition followed by BUG. drivers/media/pci/saa7164/saa7164-core.c:898:2-5: WARNING: Use BUG_ON instead of if condition followed by BUG. Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle reports: drivers/media/pci/saa7164/saa7164-vbi.c:707:2-5: WARNING: Use BUG_ON instead of if condition followed by BUG. drivers/media/pci/saa7164/saa7164-vbi.c:760:2-5: WARNING: Use BUG_ON instead of if condition followed by BUG. Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle reports: drivers/media/pci/saa7164/saa7164-dvb.c:341:2-5: WARNING: Use BUG_ON instead of if condition followed by BUG drivers/media/pci/saa7164/saa7164-dvb.c:483:2-5: WARNING: Use BUG_ON instead of if condition followed by BUG. Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle reports: drivers/media/pci/saa7164/saa7164-buffer.c:254:3-6: WARNING: Use BUG_ON instead of if condition followed by BUG. drivers/media/pci/saa7164/saa7164-buffer.c:261:3-6: WARNING: Use BUG_ON instead of if condition followed by BUG. Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle reports: drivers/media/test-drivers/vicodec/vicodec-core.c:1674:2-21: WARNING: Assignment of 0/1 to bool variable drivers/media/test-drivers/vicodec/vicodec-core.c:1675:2-26: WARNING: Assignment of 0/1 to bool variable By replacing the assignment to 0 with 'false' instead. Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle reports: drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c:197:14-35: WARNING: Comparison to bool drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c:198:7-29: WARNING: Comparison to bool drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c:451:12-19: WARNING: Comparison to bool drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c:1159:6-15: WARNING: Comparison to bool By replacing (cond == true) with (cond) and (cond == false) with (!cond) Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
Fix the following coccinelle report: drivers/media/pci/cobalt/cobalt-omnitek.c:119:5-19: WARNING: Comparison to bool By using "!cond" instead of "cond == false" Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
Daniel W. S. Almeida authored
This fixes the following coccinelle report: drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c:751:2-9: line 751 is redundant because platform_get_irq() already prints an error By removing the useless call to dev_err() Found using - Coccinelle (http://coccinelle.lip6.fr) Signed-off-by:
-
- 28 Aug, 2020 1 commit
-
-
Xia Jiang authored
Add mtk jpeg encode v4l2 driver based on jpeg decode, because that jpeg decode and encode have great similarities with function operation. Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Xia Jiang <xia.jiang@mediatek.com> Signed-off-by:
-
