- 10 May, 2024 27 commits
-
-
Krzysztof Kozlowski authored
Underscores should not be used in node names (dtc with W=2 warns about them), so replace them with hyphens. This should have no impact on known users: Linux MFD driver does not care about children node names. DTS was already adjusted in commit 0f47ef3f ("arm: dts: allwinner: drop underscore in node names"), so without this change, we observe dtbs_check warnings: sun6i-a31s-colorfly-e708-q1.dtb: prcm@1f01400: 'ahb0-clk', 'apb0-clk', 'apb0-gates-clk', 'apb0-rst', 'ar100-clk', 'ir-clk' do not match any of the regexes: '^.*_(clk|rst)$', 'pinctrl-[0-9]+' Reported-by:
Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/all/CAL_JsqJfT-jui5P56CO4Fr37kr5iNN8dpxt8ecKeFmdVGnRYbA@mail.gmail.com/Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by:
Lee Jones <lee@kernel.org>
-
Christophe JAILLET authored
In 'struct ssbi, the 'slave' field is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/8a76de25cefb533d94dfe35062bbd9a8e72f4bb9.1713971415.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Andy Shevchenko authored
The ->init() open codes the functionality of DMI matching code. Moreover, all DMI quirks are using the same callback and driver_data. With this in mind, refactor the DMI matching code. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240423210706.3709568-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Charles Keepax authored
The firmware can only be patched once. The current code checks if the firmware supports the features required by the driver and then patches if it does not. This could lead to the device being patched twice if the device was patched before the driver took control, but with a firmware that doesn't support the features the driver requires. This would fail but potentially in unpredictable ways. The check should actually check the device is at the ROM version, and patch the device if it is. Then a separate later check should error out if the devices firmware is still too old to be supported. This will at least fail in a clean way with a nice error message. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240423102339.2363400-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Herman van Hazendonk authored
Add missing compatible for the pm8901 model used in msm8660 such as (HP TouchPad (tenderloin). Signed-off-by:
Herman van Hazendonk <github.com@herrie.org> Acked-by:
-
Colin Ian King authored
The variable err is being assigned -ENODEV and then err is being re-assigned the same error value via the error exit label err_mfd. The assignment is redundant and can be removed. Cleans up clang scan build warning: drivers/mfd/timberdale.c:768:3: warning: Value stored to 'err' is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240415102632.484411-1-colin.i.king@gmail.comSigned-off-by:
-
Luca Weiss authored
Add the PBS (Programmable Boot Sequencer) to the list of devices. Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Reviewed-by:
-
Siddharth Vadapalli authored
The CTRLMMR_MAC_IDx registers within the CTRL_MMR space of TI's AM62p SoC contain the MAC Address programmed in the eFuse. Add compatible for allowing the CPSW driver to obtain a regmap for the CTRLMMR_MAC_IDx registers within the System Controller device-tree node. The default MAC Address for the interface corresponding to the first MAC port will be set to the value programmed in the eFuse. Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Acked-by:
-
Rohit Agarwal authored
Document the qcom,sdx75-tcsr compatible. Signed-off-by:
Rohit Agarwal <quic_rohiagar@quicinc.com> Acked-by:
-
wangkaiyuan authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
wangkaiyuan <wangkaiyuan@inspur.com> Link: https://lore.kernel.org/r/20240429024547.27724-1-wangkaiyuan@inspur.comSigned-off-by:
-
Matti Vaittinen authored
Some commented out code was accidentally left in the header. Clean up commented out macros. Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ZhjOj_4AUgC4Iwh_@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fiSigned-off-by:
-
Ilpo Järvinen authored
The secure update driver does a sanity-check of the image size in comparison to the size of the staging area in FLASH. Instead of hard-wiring M10BMC_STAGING_SIZE, move the staging size to the m10bmc_csr_map structure to make the size assignment more flexible. Co-developed-by:
Russ Weight <russell.h.weight@intel.com> Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by:
Peter Colberg <peter.colberg@intel.com> Reviewed-by:
Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20240402184925.1065932-1-peter.colberg@intel.comSigned-off-by:
-
Andreas Kemnade authored
As this chip was seen in several devices in the wild, add it. Suggested-by:
Andreas Kemnade <andreas@kemnade.info> Acked-by:
-
Jean Delvare authored
Drop unneeded parentheses for clarity and consistency. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20240407112445.503bcbc6@endymion.delvareSigned-off-by:
-
Christophe JAILLET authored
Use spi_sync_transfer() instead of hand-writing it. It is less verbose. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Tested-by:
-
Rob Herring authored
Add various "simple" syscon compatibles which were undocumented or still documented with old text bindings. apm,xgene-csw, apm,xgene-efuse, apm,xgene-mcb, apm,xgene-rb, fsl,ls1088a-reset, marvell,armada-3700-cpu-misc, mediatek,mt2712-pctl-a-syscfg, mediatek,mt6397-pctl-pmic-syscfg, and mediatek,mt8173-pctl-a-syscfg were all undocumented, but are in use already. Remove the old text binding docs for the others. Signed-off-by:
-
Andreas Kemnade authored
Since the chip can power off the system, add the corresponding functionality. Based on https://github.com/kobolabs/Kobo-Reader/raw/master/hw/imx6sll-clara2e/kernel.tar.bz2Signed-off-by:
-
Andreas Kemnade authored
As the PMIC can power off the system, add the corresponding property. Signed-off-by:
-
Andreas Kemnade authored
Convert subdevices with just an interrupt and compatbile to json-schema and wire up already converted subdevices. RTC is available in all variants, so allow it unconditionally. GPADC binding for TWL603X uses two different compatibles, so specify just the compatible and do not include it. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
Andy Shevchenko authored
scnprintf() never returns negative value, drop the respective dead code. Signed-off-by:
-
Andy Shevchenko authored
Since platform_device_unregister() is NULL-aware, we don't need to duplicate this check. Remove it and fold the rest of the code. Signed-off-by:
-
Andy Shevchenko authored
Use the `PLATFORM_DEVID_NONE` constant instead of hard-coding -1 when creating a platform device. No functional changes are intended. Signed-off-by:
-
Andy Shevchenko authored
Use platform_device_register_full() instead of open coding this function. Signed-off-by:
-
Andy Shevchenko authored
Instead of creating driver-specific device attributes with sysfs_create_group() have device core do this by setting up dev_groups pointer in the driver structure. Signed-off-by:
-
Andy Shevchenko authored
There is no need to include and use entire ACPI stack in the driver. Replace respective pieces by agnostic code. No functional change indented. Signed-off-by:
-
Andy Shevchenko authored
Some devices support MSI interrupts. Let's at least try to use them in platforms that provide MSI capability. Signed-off-by:
-
Lee Jones authored
Merge branches 'ib-mfd-misc-pinctrl-regulator-6.10', 'ib-mfd-pinctrl-regulator-6.10' and 'ib-mfd-regulator-6.10' into ibs-for-mfd-merged
-
- 03 May, 2024 13 commits
-
-
Nirmala Devi Mal Nadar authored
Add support for TPS65224 pinctrl and GPIOs to TPS6594 driver as they have significant functional overlap. TPS65224 PMIC has 6 GPIOS which can be configured as GPIO or other dedicated device functions. Signed-off-by:
Nirmala Devi Mal Nadar <m.nirmaladevi@ltts.com> Signed-off-by:
Bhargav Raviprakash <bhargav.r@ltts.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/0109018f2fdce15d-c13bd809-a11b-4202-9b7f-c9380d51b070-000000@ap-south-1.amazonses.comSigned-off-by:
-
Nirmala Devi Mal Nadar authored
Add support for TPS65224 regulators (bucks and LDOs) to TPS6594 driver as they have significant functional overlap. TPS65224 PMIC has 4 buck regulators and 3 LDOs. BUCK12 can operate in dual phase. The output voltages are configurable and are meant to supply power to the main processor and other components. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/0109018f2fdcc305-3b817569-21b6-42a7-942c-8edbff3848f2-000000@ap-south-1.amazonses.comSigned-off-by:
-
Bhargav Raviprakash authored
Add support for TPS65224 PFSM in the TPS6594 PFSM driver as they share significant functionality. Signed-off-by:
Julien Panis <jpanis@baylibre.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/0109018f2fdc9dc4-db5a45c0-0148-48cc-8462-d1c5b577a4bd-000000@ap-south-1.amazonses.comSigned-off-by:
-
Bhargav Raviprakash authored
Add functionality of the TPS65224 PMIC to the TPS6594 core driver. This includes adding IRQ resource, MFD cells, and device initialization for TPS65224. Signed-off-by:
-
Bhargav Raviprakash authored
Add support for TPS65224 PMIC in TPS6594's SPI driver which has significant functional overlap. Signed-off-by:
-
Bhargav Raviprakash authored
Add support for TPS65224 PMIC in TPS6594's I2C driver which has significant functional overlap. Signed-off-by:
-
Bhargav Raviprakash authored
TPS65224 is a Power Management IC with 4 Buck regulators and 3 LDO regulators, it includes additional features like GPIOs, watchdog, ESMs (Error Signal Monitor), and PFSM (Pre-configurable Finite State Machine) managing the state of the device. In addition TPS65224 has support for 12-bit ADC and does not have RTC unlike TPS6594. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/0109018f2f26a14f-157bb3a2-2f9b-4653-a619-46e1feb8f229-000000@ap-south-1.amazonses.comSigned-off-by:
-
Bhargav Raviprakash authored
In regmap_config use volatile_table instead of volatile_reg. This change makes it easier to add support for TPS65224 PMIC. Signed-off-by:
-
Nirmala Devi Mal Nadar authored
Extend TPS6594 PMIC register and field definitions to support TPS65224 power management IC. TPS65224 is software compatible to TPS6594 and can re-use many of the same definitions, new definitions are added to support additional controls available on TPS65224. Signed-off-by:
-
Alex Bee authored
Add support for rk816 to the existing rk808 regulator driver. The infrastructure of the driver can be re-used as is. A peculiarity for this version is, that BUCK1/BUCK2 have a (common) bit which needs to toggled after a voltage change to confirm the change. Regulator regmap takes care of that by defining a apply_bit and apply_reg for those regulators. Signed-off-by:
Alex Bee <knaerzche@gmail.com> Reviewed-by:
-
Alex Bee authored
rk808_set_suspend_voltage_range currently does not account the existence of apply_bit/apply_reg. This adds support for those in same way it is done in regulator_set_voltage_sel_regmap and is required for the upcoming RK816 support Signed-off-by:
-
Alex Bee authored
This adds support for RK816 to the exising rk805 pinctrl driver It has a single pin which can be configured as input from a thermistor (for instance in an attached battery) or as a gpio. Signed-off-by:
-
Alex Bee authored
This integrates RK816 support in the this existing rk8xx mfd driver. This version has unaligned interrupt registers, which requires to define a separate get_irq_reg callback for the regmap. Apart from that the integration is straightforward and the existing structures can be used as is. The initialization sequence has been taken from vendor kernel. Signed-off-by:
-
