- 25 Oct, 2013 40 commits
-
-
Jayamohan Kallickal authored
Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
When iSCSI stack invokes Abort or Reset handlers, the aborted tasks Invalid Bit in WRB needs to be set. Else FW will not be aware of the command invalidated which leads to BAD_WRB error posted by FW. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
When MBX_Cmd completion happens with error code Insufficient Buffer, the MBX_Cmd is posted again with the new buffer size posted by FW. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
The MSIx to be created for SKH-R adapter should be based on eq_count returned by get_fw_config. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Display CID available on each iSCSI Fn which can be used to offload a connection. The display is split across available CID on each chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
The connection is offload to each chute in a round-robin manner if both the chute is loaded with iSCSI protocol Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Configuration parameters returns the number of connection that can be offloaded one each chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Configuration parameters return number of CID each chute supports. The WRB_Q is created for the passed CID count. If both the Chute has iSCSI Protocol then WRB_Q creation is in a round robin mechanism. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Initialization of SGL and related PAGE posting is to be done for the chute. Based on configuration value of each Chute,SGL initialization and page posting is done. For BE-X family iSCSI protocol is loaded only on single chute Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Template HDR is created for each chute which has iSCSI Protocol loaded. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
DEF_Q[HDR/DATA] is created on the chute on which iSCSI Protocol is loaded. When a connection is offloaded, the DEF_Q HDR/Data ID needs to be passed. FW posts ASYNC message received from target on the passed DEF_Q. Connection can be offloaded on any of the chute so DEF_Q is created on each Chute. Change in the ASYNC path initialization based on the configuration parameters returned for each chute. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
On the adapter iSCSI protocol can be loaded on either one or both the CHUTE.Check on which CHUTE iSCSI Protocol is loaded and get configuration parameters based on which driver initization is done. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
The timeout set in MBX_CMD is 100sec and the ready bit checking in BMBX mode is done for 4sec. After 4sec the task is scheduled out for 5 secs to avoid kernel soft lockup stack trace. The loop of 4sec ready bit check and then schedule out is done until the following conditon occur - The Ready Bit is Set - The timeout set in MBX_CMD expires Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
The default pdu is a common resource and needs to be protected while manipulating it. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
- Removed the check of MaxXmitDSL == 0 as this is not a possible case. - Update connection offload data structure for SKH-R adapters. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Storing MAC ADDR of each function in it's priv structure to avoid issuing MAC_ADDR get IOCTL. Based on a flag set/unset it's decided if MAC_ADDR is stored in priv structure or IOCTL needs to be issued. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
When MBX CMD is posted in MCCQ and if command times out,during mccq resource cleanup for the timed out command mccq->count was not decremented. The led to BUG_ON being hit. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jayamohan Kallickal authored
Allocating memory in the Host which will be used by the TOE functionality during Session Offload. This fix will allow performance improvement as adapter memory contention will be reduced. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Eddie Wai authored
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Eddie Wai authored
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Eddie Wai authored
[v2] - removed the interface->enabled flag setting which prevented the fcoe ctlr link from being brought back up after a MTU change A rtnl_lock deadlock was observed from the rmmod thread where it tries to unregister the fcoe_ctlr device. This unregistration triggered a flush of the sysfs queue of the associated ctlr and led to a call to the set_fcoe_ctlr_enabled routine. This will eventually propagate down to call the bnx2fc_disable routine and contented for the rtnl_lock in the same context. This patch creates a subset of the bnx2fc_enable/disable routine which removes the unnecesary rtnl_lock and the bnx2fc_dev_lock acquisition from the set_fcoe_ctlr_enabled path. kernel: INFO: task rmmod:7874 blocked for more than 120 seconds. kernel: Tainted: G W --------------- 2.6.32-415.0.1.el6.x86_64 #1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: rmmod D 000000000000000f 0 7874 6518 0x00000080 kernel: ffff88022158f7d8 0000000000000086 0000000000000000 0000000000000000 kernel: ffff88023fe72600 ffff88043c74d410 ffff88043c74d400 ffff88043c74d000 kernel: ffff88021ecbe5f8 ffff88022158ffd8 000000000000fbc8 ffff88021ecbe5f8 kernel: Call Trace: kernel: [<ffffffff81525985>] schedule_timeout+0x215/0x2e0 kernel: [<ffffffff810680c0>] ? pick_next_task_fair+0xd0/0x130 kernel: [<ffffffff81524858>] ? schedule+0x178/0x3b2 kernel: [<ffffffff81525603>] wait_for_common+0x123/0x180 kernel: [<ffffffff81066b40>] ? default_wake_function+0x0/0x20 kernel: [<ffffffff811a486e>] ? ifind_fast+0x5e/0xb0 kernel: [<ffffffff8152571d>] wait_for_completion+0x1d/0x20 kernel: [<ffffffff81203868>] sysfs_addrm_finish+0x228/0x270 kernel: [<ffffffff812014ab>] sysfs_hash_and_remove+0x5b/0x90 kernel: [<ffffffff812056af>] sysfs_remove_group+0x5f/0x100 kernel: [<ffffffff81367e8b>] device_remove_groups+0x3b/0x60 kernel: [<ffffffff8136811d>] device_remove_attrs+0x3d/0x90 kernel: [<ffffffff81368295>] device_del+0x125/0x1e0 kernel: [<ffffffff81368372>] device_unregister+0x22/0x60 kernel: [<ffffffffa038ead2>] fcoe_ctlr_device_delete+0xe2/0xf4 [libfcoe] kernel: [<ffffffffa03c43cb>] bnx2fc_interface_release+0x5b/0x90 [bnx2fc] kernel: [<ffffffffa03c4370>] ? bnx2fc_interface_release+0x0/0x90 [bnx2fc] kernel: [<ffffffff812835e7>] kref_put+0x37/0x70 kernel: [<ffffffffa03c4192>] __bnx2fc_destroy+0x72/0xa0 [bnx2fc] kernel: [<ffffffffa03c5265>] bnx2fc_ulp_exit+0xf5/0x160 [bnx2fc] <- got bnx2fc_dev_lock mutex_lock kernel: [<ffffffffa03b03c6>] cnic_ulp_exit+0xb6/0xc0 [cnic] kernel: [<ffffffffa03b5418>] cnic_netdev_event+0x368/0x370 [cnic] kernel: [<ffffffffa038c56c>] ? fcoe_del_netdev_mapping+0x8c/0xa0 [libfcoe] kernel: [<ffffffff8152a6e5>] notifier_call_chain+0x55/0x80 kernel: [<ffffffff810a0a46>] raw_notifier_call_chain+0x16/0x20 kernel: [<ffffffff81459beb>] call_netdevice_notifiers+0x1b/0x20 kernel: [<ffffffff8145ab34>] rollback_registered_many+0x154/0x280 kernel: [<ffffffff8145ad08>] rollback_registered+0x38/0x50 kernel: [<ffffffff8145ad78>] unregister_netdevice_queue+0x58/0xa0 kernel: [<ffffffff8145add0>] unregister_netdevice+0x10/0x20 kernel: [<ffffffff8145adfe>] unregister_netdev+0x1e/0x30 <- got rtnl_lock!!!!!!!!! kernel: [<ffffffffa0122278>] __bnx2x_remove+0x48/0x270 [bnx2x] <- got & rel rtnl_lock kernel: [<ffffffffa0122554>] bnx2x_remove_one+0x44/0x80 [bnx2x] kernel: [<ffffffff812a3af7>] pci_device_remove+0x37/0x70 kernel: [<ffffffff8136b2ef>] __device_release_driver+0x6f/0xe0 kernel: [<ffffffff8136b428>] driver_detach+0xc8/0xd0 kernel: [<ffffffff8136a22e>] bus_remove_driver+0x8e/0x110 kernel: [<ffffffff8136bc12>] driver_unregister+0x62/0xa0 kernel: [<ffffffff812a3e04>] pci_unregister_driver+0x44/0xb0 kernel: [<ffffffffa0191954>] bnx2x_cleanup+0x18/0x73 [bnx2x] kernel: [<ffffffff810b8be4>] sys_delete_module+0x194/0x260 kernel: [<ffffffff810e1347>] ? audit_syscall_entry+0x1d7/0x200 kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Eddie Wai authored
In the case when a SCSI_CMD times out, bnx2fc will initiate the sending of the ABTS. However, if the SCSI layer's SCSI command timer also times out, it'll instantiate a task abort of the same xid. The race condition this patch tries to fix is as follows: SCSI_CMD timeout (20s) thread 1 thread 2 send ABTS rx ABTS cmpl task abort_eh explicit LOGO since ABTS was engaged CLEANUP cmpl SCSI_CMD cmpl (ABTS cmpl) instantiate RRQ wait 10s attempt to send RRQ (because of LOGO, it wouldn't continue) Note that there is no call to scsi_done for this SCSI_CMD cmpletion in this path. The patch changes the path of execution to call scsi_done immediately instead of instantiating the RRQ. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Adheer Chandravanshi authored
Add support to get local CHAP - index, username and password, sysfs params of iscsi session corresponding to flash target entry. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Adheer Chandravanshi authored
Provide support to add/update the CHAP entries in adapter's flash using iscsi tools, like Open-iSCSI. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Adheer Chandravanshi authored
For offload iSCSI like qla4xxx, CHAP entries are stored in adapter's flash. This patch adds support to add/update CHAP entries in adapter's flash using iscsi tools, like Open-iSCSI. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Adheer Chandravanshi authored
To write a CHAP entry in adapter's flash calculate the offset based on the type of adapter. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Adheer Chandravanshi authored
If any flash target entry is using CHAP authentication then set CHAP username and password sysfs params for the corresponding iscsi sessions. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Adheer Chandravanshi authored
Support setting of CHAP_OUT_IDX param for the target entry in flash. Setting of valid local CHAP index with enable CHAP AUTH for that flash target entry and disabling CHAP AUTH will invalidate the CHAP index for the flash target entry. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Adheer Chandravanshi authored
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Manish Rangankar authored
Earlier logic for driver created iscsi_session->discovery_parent_idx was to store ram index of a sendtarget entry, but driver frees sendtarget ram index as soon as firmware is done with discovery, which is available for further use. So changing the logic to point iscsi_session->discovery_parent_idx to store sendtarget flashnode index. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Sumit.Saxena@lsi.com authored
Fixed two issues in this patch- 1) In function megasas_get_pd_list(), data read(pd_addr->deviceId) from DMAed memory is converted to CPU's endianess. 2) While register AEN, removed some endianness conversion on some fields, since their endianess is already converted. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Khalid Aziz authored
Added check for DMA mapping errors for request sense data buffer. Checking for mapping error can avoid potential wild writes. This patch was prompted by the warning from dma_unmap when kernel is compiled with CONFIG_DMA_API_DEBUG. Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Hiral Patel authored
Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Hiral Patel authored
This feature gathers active and cumulative per fnic stats for io, abort, terminate, reset, vlan discovery path and it also includes various important stats for debugging issues. It also provided debugfs and ioctl interface for user to retrieve these stats. It also provides functionality to reset cumulative stats through user interface. Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Narsimhulu Musini authored
Fixed appropriate error codes that returns negative error number on failure, and 0 on success. fnic_reset() is used directly by the fc transport callback issue_fc_host_lip which requires a negative error number on failure. Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Hiral Patel <hiralpat@cisco.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jack Wang authored
If you mutiple devices connect to a host, we might be interested in have an intensive I/O workload on one disk, and notice starvation on others. This give the user more hint about current infight io for scsi device. Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Stewart, Sean authored
Signed-off-by: Sean Stewart <Sean.Stewart@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-