- 08 Dec, 2006 40 commits
-
-
Arnaud Patard (Rtp authored
This patch adds support for stn displays on the s3c2410 arm SoC. The LCD type is choosen by a new field in the s3c2410fb_mach_info structure and its value is the value of the PNRMODE bits. This worth to be noted as a value of 0 means that you configure a 4 bit dual scan stn display. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jordan Crouse authored
If no default mode is specified, it should be grabbed from the supplied database, not the default one. [teanropo@jyu.fi: fix it] [akpm@osdl.org: simplify it] [akpm@osdl.org: remove pointless DEFAULT_MODEDB_INDEX] Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Tero Roponen <teanropo@jyu.fi> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Maciej W. Rozycki authored
Inspection of real hardware has revealed one of the clock frequencies known to be supported by PMAGB-B hardware is off by 3kHz. Following is a fix. Please apply. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Acked-by:
-
David Rientjes authored
Remove unnecesary iteration and accumulator variables from SiS_DDC2Delay. Originally spotted by Jesper Juhl <jesper.juhl@gmail.com>. Cc: Jesper Juhl <jesper.juhl@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
David Rientjes <rientjes@cs.washington.edu> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jeff Garzik authored
aty128fb: return an error in the unlikely event that we cannot calculate some key PLL info rivafb: * call CalcStateExt() directly, rather than via function pointers, since CalcStateExt() is the only value ever assigned to ->CalcStateExt(). * propagate error return back from CalcVClock() through callers Signed-off-by:
Jeff Garzik <jeff@garzik.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
Amol Lad <amol@verismonetworks.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Sergei Shtylyov authored
Straighten up the IDE control/status register caching -- you *really* can't cache the shared register per-channel and hope that it won't get out ouf sync. Set the PIO fallback mode to PIO0 for the slave drive as well as master -- there was no point in having them different (most probably a resutl of typo). Do a bit of reformat and cleanup while at it... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Sergei Shtylyov authored
Fix pdcnew_tune_drive() to always set the PIO mode requested, not pick the best possible one, change pdcnew_config_drive_xfer_rate() accordingly, and get rid of the duplicate tuneproc() call in config_chipset_for_dma(). Signed-off-by:
-
Alan Cox authored
This completes IDE except for one use which requires a new core PCI function and will be polished up at the end Signed-off-by:
-
Eric W. Biederman authored
Currently there is a regression and the ipc sysctls don't show up in the binary sysctl namespace. This patch adds sysctl_ipc_data to read data/write from the appropriate namespace and deliver it in the expected manner. [akpm@osdl.org: warning fix] Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
Refactor the ipc sysctl support so that it is simpler, more readable, and prepares for fixing the bug with the wrong values being returned in the sys_sysctl interface. The function proc_do_ipc_string() was misnamed as it never handled strings. It's magic of when to work with strings and when to work with longs belonged in the sysctl table. I couldn't tell if the code would work if you disabled the ipc namespace but it certainly looked like it would have problems. Signed-off-by:
-
Eric W. Biederman authored
The problem: When using sys_sysctl we don't read the proper values for the variables exported from the uts namespace, nor do we do the proper locking. This patch introduces sysctl_uts_string which properly fetches the values and does the proper locking. Signed-off-by:
-
Eric W. Biederman authored
The binary interface to the namespace sysctls was never implemented resulting in some really weird things if you attempted to use sys_sysctl to read your hostname for example. This patch series simples the code a little and implements the binary sysctl interface. In testing this patch series I discovered that our 32bit compatibility for the binary sysctl interface is imperfect. In particular KERN_SHMMAX and KERN_SMMALL are size_t sized quantities and are returned as 8 bytes on to 32bit binaries using a x86_64 kernel. However this has existing for a long time so it is not a new regression with the namespace work. Gads the whole sysctl thing needs work before it stops being easy to shoot yourself in the foot. Looking forward a little bit we need a better way to handle sysctls and namespaces as our current technique will not work for the network namespace. I think something based on the current overlapping sysctl trees will work but the proc side needs to be redone before we can use it. This patch: Introduce get_uts() and put_uts() (used later) and remove most of the special cases for when UTS namespace is compiled in. Signed-off-by:
-
Don Mullis authored
Assign defaults most likely to please a new user: 1) generate some logging output (verbose=2) 2) avoid injecting failures likely to lock up UI (ignore_gfp_wait=1, ignore_gfp_highmem=1) Signed-off-by:Don Mullis <dwm@meer.net> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Don Mullis authored
Trivial optimization and simplification of should_fail(). Do cheaper disqualification tests first (performance gain not quantified). Simplify logic; eliminate goto. Signed-off-by:
-
Don Mullis authored
Clamp /debug/fail*/stacktrace-depth to MAX_STACK_TRACE_DEPTH. Ensures that a read of /debug/fail*/stacktrace-depth always returns a truthful answer. Signed-off-by:
-
Don Mullis authored
Use bool-true-false throughout. Signed-off-by:
-
Don Mullis authored
Correct, disambiguate, and reformat documentation. Signed-off-by:
-
Andrew Morton authored
`select' doesn't work very well. With alpha `make allmodconfig' we end up with CONFIG_STACKTRACE enabled, so we end up with undefined save_stacktrace() at link time. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by:
-
Andrew Morton authored
- Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by:
-
Akinobu Mita authored
This patch provides stacktrace filtering feature. The stacktrace filter allows failing only for the caller you are interested in. For example someone may want to inject kmalloc() failures into only e100 module. they want to inject not only direct kmalloc() call, but also indirect allocation, too. - e100_poll --> netif_receive_skb --> packet_rcv_spkt --> skb_clone --> kmem_cache_alloc This patch enables to detect function calls like this by stacktrace and inject failures. The script Documentaion/fault-injection/failmodule.sh helps it. The range of text section of loaded e100 is expected to be [/sys/module/e100/sections/.text, /sys/module/e100/sections/.exit.text) So failmodule.sh stores these values into /debug/failslab/address-start and /debug/failslab/address-end. The maximum stacktrace depth is specified by /debug/failslab/stacktrace-depth. Please see the example that demonstrates how to inject slab allocation failures only for a specific module in Documentation/fault-injection/fault-injection.txt [dwm@meer.net: reject failure if any caller lies within specified range] Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
